Message-ID: <4740692E.7010801@dbservice.com>
Date:	Sun, 18 Nov 2007 17:32:46 +0100
From:	Tomas Carnecky <tom@...ervice.com>
To:	Pavel Machek <pavel@....cz>
CC:	linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: laptop reboots right after hibernation

Pavel Machek wrote:
> Hi!
> 
>> echo disk > /sys/power/state
>>
>> successfully saves that state to the disk, but just as the laptop is
>> about to turn itself off, it reboots (successfully, so the
>> hibernation/resume process works well, even with X running! which is
>> awesome :) ). But I'd rather like the computer turned off after I
>> hibernate it. Where could the problem be?
>>
>> It's a new laptop, TP X61 tablet, I tried ubuntu (7.10, gutsy) for a few
>> days, both suspend and hibernate worked there (with one or two crashes,
>> probably due to X, I've read that the intel driver got some
>> suspend/resume improvements recently). Now I'm running gentoo, kernel
>> 2.6.24-rc2. I'm using newer versions of almost all software now compared
>> to the ubuntu system.
> 
> If it works in older ubuntu, you can probably do bisect. Does normal
> shutdown work? You can try platform vs. shutdown mode...
> 

I don't have ubuntu anymore, though I'll try if hibernate works with the
livecd. One interesting thing I've found out: hibernate reboots the
laptop _only_ if it is in the docking station. If I hibernate while
outside of the docking station, it properly shuts down the laptop.

The default mode seems to be 'platform', after I echoed 'shutdown' to
/sys/power/disk the notebook correctly shuts down after hibernation!

Some interesting facts. All tests were done with 2.6.24-rc2, custom
tailored kernel with just the options needed for my notebook (ThinkPad
X61 Tablet) - without drm modules and bluetooth but with iwl4965 loaded.
All tests were done without X running, from the console. If I say
something 'works' it means I tested it at least three/four times in a
row (if not even more).

(1) Both STR and STD work correctly if I keep the notebook outside of
the docking station (both in platform and shutdown mode).

(2) Both STR and STD work correctly if I keep the notebook in the
docking station (both in platform and shutdown mode - with the small
glitch in platform mode that the notebook won't power off after
hibernation).

(3) Once the notebook was in the docking station (whether I boot it
while in the dock or boot it outside and then put it into the dock) and
I take it out (press the 'undock' button on the dock, wait for the green
led, then take out the notebook) things get interesting:

(a) I initiate STR, notebook correctly goes to sleep, but it only wakes
up if I have it in the docking station. If I try to wake it up outside
of the docking station it will fail.

(b) I initiate STD, and it locks up after a few seconds, at that time
only the cursor in the top left screen is visible (not blinking). If I
put the notebook in its locked up state into the dock, it will reboot
after a few seconds.

(4) If the notebook is in the dock and I initiate STR and then press the
undock button, it resumes (I assume that is 'working as intended').

(5) If the notebook is in the dock, I press the undock button and wait
for the green led then initiate STR, I can take the notebook out but
resuming doesn't work - unless I resume it while the notebook is back in
the docking station (see point 3a)

(6) If the notebook is in the dock, I press the undock button and wait
for the green led, then initiate STD:

(a) in platform mode: I can take the notebook out but resuming doesn't
work - unless I resume it while the notebook is back in the docking
station (contrary to point 3b). It seems as the notebook 'locks' itself
into the docking station during STD, I see the green led change into red
during the hibernation process (just before heavy HD activity starts).

(b) in shutdown mode: STD fails with a completely black screen, not even
the cursor is visible.

There doesn't seem to be a difference between platform and shutdown mode
other than the reboot glitch when the laptop is in the docking station
or as described in point 6.

tom
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists