| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 18 Nov 2007 23:18:48 -0700 From: "Raymano Garibaldi" <raymano@...nos.com> To: "Denys Vlasenko" <vda.linux@...glemail.com> Cc: linux-kernel@...r.kernel.org Subject: Re: [BUG] USB_PERSIST The last time I tried this and it worked was 2.6.21. Below is a portion of the kernel log file where I had a USB storage device attached to the computer, then suspended the computer, while computer was suspended detached and reattached the USB storage device, and resumed the computer. -------------------------------------------------------------------------------------------------------------------------------- Nov 18 23:07:42 myfaun Stopping tasks ... done. Nov 18 23:07:42 myfaun Suspending console(s) Nov 18 23:07:42 myfaun sd 2:0:0:0: [sda] Synchronizing SCSI cache Nov 18 23:07:42 myfaun sd 2:0:0:0: [sda] Stopping disk Nov 18 23:07:42 myfaun ACPI handle has no context! Nov 18 23:07:42 myfaun ACPI handle has no context! Nov 18 23:07:42 myfaun ACPI: PCI interrupt for device 0000:00:1f.2 disabled Nov 18 23:07:42 myfaun ACPI: PCI interrupt for device 0000:00:1f.1 disabled Nov 18 23:07:42 myfaun ACPI: PCI interrupt for device 0000:00:1d.7 disabled Nov 18 23:07:42 myfaun ACPI: PCI interrupt for device 0000:00:1d.3 disabled Nov 18 23:07:42 myfaun ACPI: PCI interrupt for device 0000:00:1d.2 disabled Nov 18 23:07:42 myfaun ACPI: PCI interrupt for device 0000:00:1d.1 disabled Nov 18 23:07:42 myfaun ACPI: PCI interrupt for device 0000:00:1d.0 disabled Nov 18 23:07:42 myfaun ACPI: PCI interrupt for device 0000:00:1b.0 disabled Nov 18 23:07:42 myfaun Disabling non-boot CPUs ... Nov 18 23:07:42 myfaun CPU 1 is now offline Nov 18 23:07:42 myfaun SMP alternatives: switching to UP code Nov 18 23:07:42 myfaun CPU1 is down Nov 18 23:07:42 myfaun Intel machine check architecture supported. Nov 18 23:07:42 myfaun Intel machine check reporting enabled on CPU#0. Nov 18 23:07:42 myfaun CPU0: Intel P4/Xeon Extended MCE MSRs (24) available Nov 18 23:07:42 myfaun CPU0: Thermal monitoring enabled Nov 18 23:07:42 myfaun Back to C! Nov 18 23:07:42 myfaun Enabling non-boot CPUs ... Nov 18 23:07:42 myfaun SMP alternatives: switching to SMP code Nov 18 23:07:42 myfaun Booting processor 1/1 eip 3000 Nov 18 23:07:42 myfaun Initializing CPU#1 Nov 18 23:07:42 myfaun Calibrating delay using timer specific routine.. 6004.38 BogoMIPS (lpj=10003815) Nov 18 23:07:42 myfaun CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 00000000 Nov 18 23:07:42 myfaun monitor/mwait feature present. Nov 18 23:07:42 myfaun CPU: Trace cache: 12K uops, L1 D cache: 16K Nov 18 23:07:42 myfaun CPU: L2 cache: 2048K Nov 18 23:07:42 myfaun CPU: Physical Processor ID: 0 Nov 18 23:07:42 myfaun CPU: Processor Core ID: 1 Nov 18 23:07:42 myfaun CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000e49d 00000000 00000001 00000000 Nov 18 23:07:42 myfaun Intel machine check architecture supported. Nov 18 23:07:42 myfaun Intel machine check reporting enabled on CPU#1. Nov 18 23:07:42 myfaun CPU1: Intel P4/Xeon Extended MCE MSRs (24) available Nov 18 23:07:42 myfaun CPU1: Thermal monitoring enabled Nov 18 23:07:42 myfaun CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 05 Nov 18 23:07:42 myfaun CPU1 is up Nov 18 23:07:42 myfaun ACPI: Unable to turn cooling device [dfe34dc8] 'off' Nov 18 23:07:42 myfaun Switched to high resolution mode on CPU 1 Nov 18 23:07:42 myfaun ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 19 Nov 18 23:07:42 myfaun PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 105) Nov 18 23:07:42 myfaun PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing fdff8004) Nov 18 23:07:42 myfaun PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 8) Nov 18 23:07:42 myfaun PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002) Nov 18 23:07:42 myfaun ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 19 Nov 18 23:07:42 myfaun PCI: Setting latency timer of device 0000:00:1b.0 to 64 Nov 18 23:07:42 myfaun ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18 Nov 18 23:07:42 myfaun PCI: Setting latency timer of device 0000:00:1d.0 to 64 Nov 18 23:07:42 myfaun ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 Nov 18 23:07:42 myfaun PCI: Setting latency timer of device 0000:00:1d.1 to 64 Nov 18 23:07:42 myfaun ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16 Nov 18 23:07:42 myfaun PCI: Setting latency timer of device 0000:00:1d.2 to 64 Nov 18 23:07:42 myfaun ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 19 Nov 18 23:07:42 myfaun PCI: Setting latency timer of device 0000:00:1d.3 to 64 Nov 18 23:07:42 myfaun PCI: Enabling device 0000:00:1d.7 (0000 -> 0002) Nov 18 23:07:42 myfaun ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18 Nov 18 23:07:42 myfaun PCI: Setting latency timer of device 0000:00:1d.7 to 64 Nov 18 23:07:42 myfaun PM: Writing back config space on device 0000:00:1d.7 at offset f (was 100, writing 107) Nov 18 23:07:42 myfaun PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing fdfff000) Nov 18 23:07:42 myfaun PCI: Setting latency timer of device 0000:00:1e.0 to 64 Nov 18 23:07:42 myfaun PM: Writing back config space on device 0000:00:1f.1 at offset 8 (was f001, writing fa01) Nov 18 23:07:42 myfaun ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16 Nov 18 23:07:42 myfaun PCI: Setting latency timer of device 0000:00:1f.1 to 64 Nov 18 23:07:42 myfaun ata2: port disabled. ignoring. Nov 18 23:07:42 myfaun ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17 Nov 18 23:07:42 myfaun PCI: Setting latency timer of device 0000:00:1f.2 to 64 Nov 18 23:07:42 myfaun pnp: Failed to activate device 00:07. Nov 18 23:07:42 myfaun pnp: Failed to activate device 00:08. Nov 18 23:07:42 myfaun e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex Nov 18 23:07:42 myfaun ata4: SATA link down (SStatus 0 SControl 300) Nov 18 23:07:42 myfaun ata6: SATA link down (SStatus 0 SControl 300) Nov 18 23:07:42 myfaun ata5: SATA link down (SStatus 0 SControl 300) Nov 18 23:07:42 myfaun ata1.00: configured for UDMA/33 Nov 18 23:07:42 myfaun sd 2:0:0:0: [sda] Starting disk Nov 18 23:07:42 myfaun ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 18 23:07:42 myfaun ata3.00: configured for UDMA/100 Nov 18 23:07:42 myfaun sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) Nov 18 23:07:42 myfaun sd 2:0:0:0: [sda] Write Protect is off Nov 18 23:07:42 myfaun sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Nov 18 23:07:42 myfaun sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 18 23:07:42 myfaun Restarting tasks ... <6>usb 5-6: USB disconnect, address 5 Nov 18 23:07:42 myfaun sd 9:0:0:0: [sdf] READ CAPACITY failed Nov 18 23:07:42 myfaun sd 9:0:0:0: [sdf] Result: hostbyte=0x01 driverbyte=0x00 Nov 18 23:07:42 myfaun sd 9:0:0:0: [sdf] Sense not available. Nov 18 23:07:42 myfaun sd 9:0:0:0: [sdf] Write Protect is off Nov 18 23:07:42 myfaun sd 9:0:0:0: [sdf] Mode Sense: 00 00 00 00 Nov 18 23:07:42 myfaun sd 9:0:0:0: [sdf] Assuming drive cache: write through Nov 18 23:07:42 myfaun done. Nov 18 23:07:42 myfaun usb 5-6: new high speed USB device using ehci_hcd and address 6 Nov 18 23:07:42 myfaun usb 5-6: configuration #1 chosen from 1 choice Nov 18 23:07:42 myfaun scsi10 : SCSI emulation for USB Mass Storage devices Nov 18 23:07:42 myfaun usb-storage: device found at 6 Nov 18 23:07:42 myfaun usb-storage: waiting for device to settle before scanning Nov 18 23:07:48 myfaun scsi 10:0:0:0: Direct-Access USB 2.0 Flash Disk 1.00 PQ: 0 ANSI: 2 Nov 18 23:07:48 myfaun sd 10:0:0:0: [sdg] 1982464 512-byte hardware sectors (1015 MB) Nov 18 23:07:48 myfaun sd 10:0:0:0: [sdg] Write Protect is off Nov 18 23:07:48 myfaun sd 10:0:0:0: [sdg] Mode Sense: 03 00 00 00 Nov 18 23:07:48 myfaun sd 10:0:0:0: [sdg] Assuming drive cache: write through Nov 18 23:07:48 myfaun sd 10:0:0:0: [sdg] 1982464 512-byte hardware sectors (1015 MB) Nov 18 23:07:48 myfaun sd 10:0:0:0: [sdg] Write Protect is off Nov 18 23:07:48 myfaun sd 10:0:0:0: [sdg] Mode Sense: 03 00 00 00 Nov 18 23:07:48 myfaun sd 10:0:0:0: [sdg] Assuming drive cache: write through Nov 18 23:07:48 myfaun sdg: sdg1 sdg2 Nov 18 23:07:48 myfaun sd 10:0:0:0: [sdg] Attached SCSI removable disk Nov 18 23:07:48 myfaun sd 10:0:0:0: Attached scsi generic sg6 type 0 Nov 18 23:07:48 myfaun usb-storage: device scan complete -------------------------------------------------------------------------------------------------------------------------------- Thanks, Raymano G. On 11/18/07, Denys Vlasenko <vda.linux@...glemail.com> wrote: > On Sunday 18 November 2007 20:14, Raymano Garibaldi wrote: > > In kernel 2.6.23.8 USB_PERSIST feature does not work if the same USB > > device is detached and reattached while computer is suspended. The > > mount points for the USB storage device mounted before suspend are > > lost and the device has to be remounted after resume. > > Does it work in 2.6.23.7? What messages you see in the kernel logs > (in both kernels, good and bad)? > -- > vda > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists