linux-kernel - Re: laptop reboots right after hibernation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1195551141.2792.3.camel@localhost.localdomain>
Date:	Tue, 20 Nov 2007 10:32:21 +0100
From:	Kjartan Maraas <kmaraas@...adpark.no>
To:	Tomas Carnecky <tom@...ervice.com>
Cc:	Pavel Machek <pavel@....cz>, linux-ide@...r.kernel.org,
	linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: laptop reboots right after hibernation


sø., 18.11.2007 kl. 21.16 +0100, skrev Tomas Carnecky:
> Since this is becoming more an IDE/ATA issue, I added
> linux-ide@...r.kernel.org to CC. I hope that's the right mailinglist.
> 
> Tomas Carnecky wrote:
> > (3) Once the notebook was in the docking station (whether I boot it
> > while in the dock or boot it outside and then put it into the dock) and
> > I take it out (press the 'undock' button on the dock, wait for the green
> > led, then take out the notebook) things get interesting:
> > 
> > (a) I initiate STR, notebook correctly goes to sleep, but it only wakes
> > up if I have it in the docking station. If I try to wake it up outside
> > of the docking station it will fail.
> 
[snip str problem description]

> ata4.00: ACPI cmd ef/03:45:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04)
> ata4: failed to recover some devices, retrying in 5 secs
> Coming out of suspend...
> [... snip ...]
> ata4.00: ACPI cmd ef/03:45:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04)
> ata4.00: ACPI on devcfg failed the second time, disabling (errno=-5)
> ata4.00: revalidation failed (errno=1)
> ata4: failed to recover some devices, retrying in 5 secs
> ata4.00: configured for UDMA/33
> 
I get this exact error message on a normal first time boot here. I'm
using the latest fedora development kernel which is 2.6.24-rc2-git6
based. And I have the latest BIOS from HP IIRC.

This is an HP nc6400 intel based laptop:

ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04)
ata1.00: ACPI on devcfg failed the second time, disabling (errno=-5)
ata1.00: revalidation failed (errno=1)
ata1: failed to recover some devices, retrying in 5 secs
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 0)
ata4: SATA link down (SStatus 0 SControl 0)
scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2080B 892C PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
insmod used greatest stack depth: 596 bytes left

lspci:

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 01)
01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5753M Gigabit Ethernet PCI Express (rev 21)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
04:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
04:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
04:06.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
04:06.4 Communication controller: Texas Instruments PCIxx12 GemCore based SmartCard controller

Cheers
Kjartan


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/