Linux version 2.6.23.1 (root@tcom.domain.local) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #2 SMP Thu Nov 15 10:31:53 CET 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfe50000 (usable) BIOS-e820: 00000000cfe50000 - 00000000cfe58000 (ACPI data) BIOS-e820: 00000000cfe58000 - 00000000d0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000012ffff000 (usable) Node: 0, start_pfn: 0, end_pfn: 159 Setting physnode_map array to node 0 for pfns: 0 Node: 0, start_pfn: 256, end_pfn: 851536 Setting physnode_map array to node 0 for pfns: 256 65792 131328 196864 262400 327936 393472 459008 524544 590080 655616 721152 786688 Node: 0, start_pfn: 1048576, end_pfn: 1245183 Setting physnode_map array to node 0 for pfns: 1048576 1114112 1179648 get_memcfg_from_srat: assigning address to rsdp RSD PTR v2 [HP ] Begin SRAT table scan.... CPU 0x00 in proximity domain 0x00 CPU 0x01 in proximity domain 0x00 Memory range 0x0 to 0xA0 (type 0x1) in proximity domain 0x00 enabled Memory range 0x100 to 0x80000 (type 0x1) in proximity domain 0x00 enabled CPU 0x02 in proximity domain 0x01 CPU 0x03 in proximity domain 0x01 Memory range 0x80000 to 0xD0000 (type 0x1) in proximity domain 0x01 enabled Memory range 0x100000 to 0x130000 (type 0x1) in proximity domain 0x01 enabled acpi20_parse_srat: Entry length value is zero; can't parse any further! pxm bitmap: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Number of logical nodes in system = 2 Number of memory chunks in system = 4 chunk 0 nid 0 start_pfn 00000000 end_pfn 000000a0 Entering add_active_range(0, 0, 160) 0 entries of 256 used chunk 1 nid 0 start_pfn 00000100 end_pfn 00080000 Entering add_active_range(0, 256, 524288) 1 entries of 256 used chunk 2 nid 1 start_pfn 00080000 end_pfn 000d0000 Entering add_active_range(1, 524288, 851968) 2 entries of 256 used chunk 3 nid 1 start_pfn 00100000 end_pfn 00130000 Entering add_active_range(1, 1048576, 1245184) 3 entries of 256 used Node: 0, start_pfn: 0, end_pfn: 524288 Setting physnode_map array to node 0 for pfns: 0 65536 131072 196608 262144 327680 393216 458752 Node: 1, start_pfn: 524288, end_pfn: 1245184 Setting physnode_map array to node 1 for pfns: 524288 589824 655360 720896 786432 851968 917504 983040 1048576 1114112 1179648 Reserving 4608 pages of KVA for lmem_map of node 0 Shrinking node 0 from 524288 pages to 519680 pages Reserving 6144 pages of KVA for lmem_map of node 1 Shrinking node 1 from 1245183 pages to 1239039 pages Shrinking node 1 further by 511 pages for proper alignment Reserving total of 10752 pages for numa KVA remap kva_start_pfn ~ 218112 find_max_low_pfn() ~ 229376 max_pfn = 1245183 3967MB HIGHMEM available. 896MB LOWMEM available. min_low_pfn = 2158, max_low_pfn = 229376, highstart_pfn = 229376 Low memory ends at vaddr f8000000 node 0 will remap to vaddr f5400000 - f9200000 node 1 will remap to vaddr f6600000 - faa00000 High memory starts at vaddr f8000000 found SMP MP-table at 000f4f80 NX (Execute Disable) protection: active Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 1245183 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0 -> 160 0: 256 -> 519680 1: 524288 -> 851968 1: 1048576 -> 1238528 On node 0 totalpages: 519584 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3968 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2268 pages used for memmap HighMem zone: 288036 pages, LIFO batch:31 Movable zone: 0 pages used for memmap On node 1 totalpages: 517632 DMA zone: 0 pages used for memmap Normal zone: 0 pages used for memmap HighMem zone: 5580 pages used for memmap HighMem zone: 512052 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.3 present. Using APIC driver default ACPI: RSDP 000F4F00, 0024 (r2 HP ) ACPI: XSDT CFE50780, 005C (r1 HP A09 2 Ò 162E) ACPI: FACP CFE50800, 00F4 (r3 HP A09 2 Ò 162E) ACPI: DSDT CFE50900, 4D3B (r1 HP DSDT 1 INTL 20030228) ACPI: FACS CFE50100, 0040 ACPI: SPCR CFE50140, 0050 (r1 HP SPCRRBSU 1 Ò 162E) ACPI: MCFG CFE501C0, 003C (r1 HP ProLiant 1 0) ACPI: HPET CFE50200, 0038 (r1 HP A09 2 Ò 162E) ACPI: SPMI CFE50240, 0040 (r5 HP ProLiant 1 Ò 162E) ACPI: APIC CFE50280, 00EA (r1 HP 00000083 2 0) ACPI: SRAT CFE50380, 0110 (r1 AMD HAMMER 1 AMD 1) ACPI: PM-Timer IO Port: 0x920 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:1 APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 15:1 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31 ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32]) IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 3 I/O APICs ACPI: HPET id: 0x1166a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000) Built 2 zonelists in Zone order. Total pages: 1027576 Policy zone: HighMem Kernel command line: ro root=LABEL=/ mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) mapped IOAPIC to ffff9000 (fec01000) mapped IOAPIC to ffff8000 (fec02000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07e3000 soft=c07c3000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2400.147 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing HighMem for node 0 (00038000:0007ee00) Initializing HighMem for node 1 (00080000:0012e600) Memory: 4097176k/4980732k available (2420k kernel code, 49956k reserved, 1132k data, 264k init, 3230016k highmem) virtual kernel memory layout: fixmap : 0xffc54000 - 0xfffff000 (3756 kB) pkmap : 0xffa00000 - 0xffc00000 (2048 kB) vmalloc : 0xf8800000 - 0xff9fe000 ( 113 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc077e000 - 0xc07c0000 ( 264 kB) .data : 0xc065d2d8 - 0xc07786a4 (1132 kB) .text : 0xc0400000 - 0xc065d2d8 (2420 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Calibrating delay using timer specific routine.. 4802.71 BogoMIPS (lpj=2401359) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(2) -> Core 0 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: AMD Dual-Core AMD Opteron(tm) Processor 2216 HE stepping 03 Mapping cpu 0 to node 0 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c07e4000 soft=c07c4000 Initializing CPU#1 Mapping cpu 1 to node 0 Calibrating delay using timer specific routine.. 4800.20 BogoMIPS (lpj=2400101) CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1(2) -> Core 1 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Dual-Core AMD Opteron(tm) Processor 2216 HE stepping 03 SMP alternatives: switching to SMP code Booting processor 2/2 eip 3000 CPU 2 irqstacks, hard=c07e5000 soft=c07c5000 Initializing CPU#2 Mapping cpu 2 to node 0 Calibrating delay using timer specific routine.. 4800.35 BogoMIPS (lpj=2400178) CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 2(2) -> Core 0 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: AMD Dual-Core AMD Opteron(tm) Processor 2216 HE stepping 03 SMP alternatives: switching to SMP code Booting processor 3/3 eip 3000 CPU 3 irqstacks, hard=c07e6000 soft=c07c6000 Initializing CPU#3 Mapping cpu 3 to node 0 Calibrating delay using timer specific routine.. 4800.12 BogoMIPS (lpj=2400061) CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 3(2) -> Core 1 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: AMD Dual-Core AMD Opteron(tm) Processor 2216 HE stepping 03 Total of 4 processors activated (19203.39 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 4 CPUs khelper used greatest stack depth: 3264 bytes left NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at d0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0072, last bus=74 PCI: Using configuration type 1 Setting up standard PCI resources khelper used greatest stack depth: 3152 bytes left ACPI: EC: Look up EC in DSDT ACPI: SSDT CFE58000, 046C (r2 HP PNOWSSDT 2 HP 1) ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: PXH quirk detected, disabling MSI for SHPC device ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB0.PXH0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB4._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXBA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXBB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXBD._PRT] ACPI: PCI Interrupt Link [IUSB] (IRQs *5) ACPI: PCI Interrupt Link [IN00] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN01] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN02] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN03] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN04] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN05] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN06] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN07] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN08] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN09] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN10] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN11] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN12] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN13] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN14] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN15] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN16] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN17] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN18] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN19] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN20] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN21] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN22] (IRQs 7 *10 11) ACPI: PCI Interrupt Link [IN23] (IRQs *7 10 11) ACPI: PCI Interrupt Link [IN24] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN25] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN26] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN27] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN28] (IRQs *7 10 11) ACPI: PCI Interrupt Link [IN29] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN30] (IRQs 7 *10 11) ACPI: PCI Interrupt Link [IN31] (IRQs 7 10 11) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Time: hpet clocksource has been installed. pnp: 00:01: ioport range 0x408-0x40f has been reserved pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved pnp: 00:01: iomem range 0xd0000000-0xdfffffff has been reserved PCI: Bridge: 0000:01:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:05:00.0 IO window: disabled. MEM window: f9e00000-f9ffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0f.0 IO window: disabled. MEM window: f9d00000-f9ffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:10.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:11.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:12.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:03:00.0 IO window: disabled. MEM window: f6000000-f7ffffff PREFETCH window: e0000000-e00fffff PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: f6000000-f7ffffff PREFETCH window: e0000000-e00fffff ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 42 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:0f.0 to 64 PCI: Setting latency timer of device 0000:05:00.0 to 64 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 38 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:10.0 to 64 ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 39 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:11.0 to 64 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 40 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:12.0 to 64 ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 41 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:03:00.0 to 64 PCI: Bridge: 0000:40:0f.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:40:10.0 IO window: 4000-4fff MEM window: fde00000-fdffffff PREFETCH window: e0200000-e02fffff PCI: Bridge: 0000:40:11.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:41:00.0 IO window: disabled. MEM window: fa000000-fbffffff PREFETCH window: e0300000-e03fffff PCI: Bridge: 0000:40:12.0 IO window: disabled. MEM window: fa000000-fbffffff PREFETCH window: e0300000-e03fffff PCI: Bridge: 0000:40:13.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:40:0f.0[A] -> GSI 36 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:40:0f.0 to 64 ACPI: PCI Interrupt 0000:40:10.0[A] -> GSI 32 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:40:10.0 to 64 ACPI: PCI Interrupt 0000:40:11.0[A] -> GSI 33 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:40:11.0 to 64 ACPI: PCI Interrupt 0000:40:12.0[A] -> GSI 34 (level, low) -> IRQ 24 PCI: Setting latency timer of device 0000:40:12.0 to 64 PCI: Setting latency timer of device 0000:41:00.0 to 64 ACPI: PCI Interrupt 0000:40:13.0[A] -> GSI 35 (level, low) -> IRQ 25 PCI: Setting latency timer of device 0000:40:13.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1280k freed khelper used greatest stack depth: 3084 bytes left apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1195568280.526:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:03.0 pci 0000:00:04.4: HCRESET not completed yet! PCI: MSI quirk detected. MSI deactivated. PCI: Setting latency timer of device 0000:00:0f.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0f.0:pcie00] PCI: Setting latency timer of device 0000:00:10.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:10.0:pcie00] PCI: Setting latency timer of device 0000:00:11.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:11.0:pcie00] PCI: Setting latency timer of device 0000:00:12.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:12.0:pcie00] PCI: Setting latency timer of device 0000:00:13.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:13.0:pcie00] PCI: Setting latency timer of device 0000:40:0f.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:0f.0:pcie00] PCI: Setting latency timer of device 0000:40:10.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:10.0:pcie00] PCI: Setting latency timer of device 0000:40:11.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:11.0:pcie00] PCI: Setting latency timer of device 0000:40:12.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:12.0:pcie00] PCI: Setting latency timer of device 0000:40:13.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:40:13.0:pcie00] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Compaq SMART2 Driver (v 2.6.0) HP CISS Driver (v 3.6.14) ACPI: PCI Interrupt 0000:46:00.0[A] -> GSI 32 (level, low) -> IRQ 22 cciss: MSI-X init failed -22 cciss0: <0x3230> at PCI 0000:46:00.0 IRQ 22 using DAC blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 blocks= 286677120 block_size= 512 heads=255, sectors=32, cylinders=35132 cciss/c0d0: p1 p2 Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.6.5 (September 20, 2007) ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 41 (level, low) -> IRQ 20 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f6000000, IRQ 20, node addr 001cc456bda2 ACPI: PCI Interrupt 0000:42:00.0[A] -> GSI 34 (level, low) -> IRQ 24 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 24, node addr 001cc456bda0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks HT1000: IDE controller at PCI slot 0000:00:06.1 SvrWks HT1000: chipset revision 0 SvrWks HT1000: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:pio, hdb:pio Probing IDE interface ide0... hda: TEAC DV-W28ECW, ATAPI CD/DVD-ROM drive hda: selected mode 0x22 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide-floppy driver 0.99.newide PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 Dual-Core AMD Opteron(tm) Processor 2216 HE processors (4 cpu cores) (version 2.00.00) powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0xc powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xe powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x10 powernow-k8: 3 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0xc powernow-k8: 1 : fid 0xe (2200 MHz), vid 0xe powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x10 powernow-k8: 3 : fid 0xa (1800 MHz), vid 0x10 powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 Using IPI No-Shortcut mode Freeing unused kernel memory: 264k freed Write protecting the kernel read-only data: 783k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:04.4[B] -> GSI 45 (level, low) -> IRQ 26 uhci_hcd 0000:00:04.4: UHCI Host Controller uhci_hcd 0000:00:04.4: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:00:04.4: HCRESET not completed yet! uhci_hcd 0000:00:04.4: irq 26, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected insmod used greatest stack depth: 2440 bytes left ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 5 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [IUSB] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:07.0: OHCI Host Controller ohci_hcd 0000:00:07.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:07.0: irq 5, io mem 0xf5ee0000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:07.1[A] -> Link [IUSB] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:07.1: OHCI Host Controller ohci_hcd 0000:00:07.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:07.1: irq 5, io mem 0xf5ed0000 usb 1-1: new full speed USB device using uhci_hcd and address 2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected input: PS/2 Generic Mouse as /class/input/input1 insmod used greatest stack depth: 2368 bytes left ACPI: PCI Interrupt 0000:00:07.2[A] -> Link [IUSB] -> GSI 5 (level, low) -> IRQ 5 ehci_hcd 0000:00:07.2: EHCI Host Controller ehci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:07.2: irq 5, io mem 0xf5ec0000 ehci_hcd 0000:00:07.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 4 ports detected usb 1-1: configuration #1 chosen from 1 choice input: HP Virtual Keyboard as /class/input/input2 input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:00:04.4-1 input: HP Virtual Keyboard as /class/input/input3 input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:00:04.4-1 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usb 1-2: new full speed USB device using uhci_hcd and address 3 audit(1195568284.624:2): enforcing=1 old_enforcing=0 auid=4294967295 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 7 ports detected security: 3 users, 6 roles, 1587 types, 172 bools, 1 sens, 1024 cats security: 59 classes, 49762 rules security: class dccp_socket not defined in policy security: class memprotect not defined in policy security: permission dccp_recv in class node not defined in policy security: permission dccp_send in class node not defined in policy security: permission dccp_recv in class netif not defined in policy security: permission dccp_send in class netif not defined in policy SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev cciss/c0d0p1, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1195568284.819:3): policy loaded auid=4294967295 hostname used greatest stack depth: 2180 bytes left uname used greatest stack depth: 2080 bytes left mount used greatest stack depth: 1376 bytes left usb 3-1: new full speed USB device using ohci_hcd and address 2 usb 3-1: not running at top speed; connect to a high speed hub usb 3-1: configuration #1 chosen from 1 choice hub 3-1:1.0: USB hub found hub 3-1:1.0: 4 ports detected hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ipmi message handler version 39.1 IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 piix4_smbus 0000:00:06.0: Found 0000:00:06.0 device Floppy drive(s): fd0 is 1.44M input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: duplicate interface ACPI: PCI Interrupt 0000:00:04.6[A] -> GSI 46 (level, low) -> IRQ 27 ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf5ef0000, slave address 0x0, irq 27 Using irq 27 ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized floppy0: no floppy controllers found Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found lp: driver loaded but no devices found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com EXT3 FS on cciss/c0d0p1, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 4096564k swap on /dev/cciss/c0d0p2. Priority:-1 extents:1 across:4096564k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts rc.sysinit used greatest stack depth: 1192 bytes left NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead. Clocksource tsc unstable (delta = -254144931 ns) ADDRCONF(NETDEV_UP): eth0: link is not ready bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ADDRCONF(NETDEV_UP): eth1: link is not ready bnx2: eth1 NIC Copper Link is Up, 1000 Mbps full duplex ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready audit(1195568307.893:4): audit_pid=2804 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 eth0: no IPv6 routers present eth1: no IPv6 routers present Bluetooth: HIDP (Human Interface Emulation) ver 1.2 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts