| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <9a7d0fc25bffc07d46a6bb015b824f9cb3c21480.1196176751.git.andre@bitwigglers.org>
Date: Tue, 27 Nov 2007 16:51:40 +0100
From: Andre Haupt <andre@...wigglers.org>
To: linux-kernel@...r.kernel.org
Cc: jsimmons@...rs.sf.net, kernel-janitors@...r.kernel.org,
adaplas@...il.com, Andre Haupt <andre@...wigglers.org>
Subject: [PATCH 2/2] fbmon: cleanup trailing whitespaces
From: Andre Haupt <andre@...wigglers.org>
Signed-off-by: Andre Haupt <andre@...wigglers.org>
---
drivers/video/fbmon.c | 116 ++++++++++++++++++++++++------------------------
1 files changed, 58 insertions(+), 58 deletions(-)
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 3f3a4e9..038ebf1 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -4,7 +4,7 @@
* Copyright (C) 2002 James Simmons <jsimmons@...rs.sf.net>
*
* Credits:
- *
+ *
* The EDID Parser is a conglomeration from the following sources:
*
* 1. SciTech SNAP Graphics Architecture
@@ -12,13 +12,13 @@
*
* 2. XFree86 4.3.0, interpret_edid.c
* Copyright 1998 by Egbert Eich <Egbert.Eich@...sik.TU-Darmstadt.DE>
- *
- * 3. John Fremlin <vii@...rs.sourceforge.net> and
+ *
+ * 3. John Fremlin <vii@...rs.sourceforge.net> and
* Ani Joshi <ajoshi@...xbox.com>
- *
+ *
* Generalized Timing Formula is derived from:
*
- * GTF Spreadsheet by Andy Morrish (1/5/97)
+ * GTF Spreadsheet by Andy Morrish (1/5/97)
* available at http://www.vesa.org
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -36,7 +36,7 @@
#endif
#include "edid.h"
-/*
+/*
* EDID parser
*/
@@ -160,8 +160,8 @@ static int check_edid(unsigned char *edid)
for (i = 0; i < ARRAY_SIZE(brokendb); i++) {
if (!strncmp(manufacturer, brokendb[i].manufacturer, 4) &&
brokendb[i].model == model) {
- fix = brokendb[i].fix;
- break;
+ fix = brokendb[i].fix;
+ break;
}
}
@@ -323,7 +323,7 @@ static void get_dpms_capabilities(unsigned char flags,
(flags & DPMS_SUSPEND) ? "yes" : "no",
(flags & DPMS_STANDBY) ? "yes" : "no");
}
-
+
static void get_chroma(unsigned char *block, struct fb_monspecs *specs)
{
int tmp;
@@ -365,7 +365,7 @@ static void get_chroma(unsigned char *block, struct fb_monspecs *specs)
tmp += 512;
specs->chroma.bluey = tmp/1024;
DPRINTK("BlueY: 0.%03d\n", specs->chroma.bluey);
-
+
tmp = ((block[6] & (3 << 2)) >> 2) | (block[0xd] << 2);
tmp *= 1000;
tmp += 512;
@@ -383,7 +383,7 @@ static void calc_mode_timings(int xres, int yres, int refresh,
struct fb_videomode *mode)
{
struct fb_var_screeninfo *var;
-
+
var = kzalloc(sizeof(struct fb_var_screeninfo), GFP_KERNEL);
if (var) {
@@ -451,11 +451,11 @@ static int get_est_timing(unsigned char *block, struct fb_videomode *mode)
c = block[1];
if (c&0x80) {
- mode[num++] = vesa_modes[9];
+ mode[num++] = vesa_modes[9];
DPRINTK(" 800x600@...z\n");
}
if (c&0x40) {
- mode[num++] = vesa_modes[10];
+ mode[num++] = vesa_modes[10];
DPRINTK(" 800x600@...z\n");
}
if (c&0x20) {
@@ -495,7 +495,7 @@ static int get_est_timing(unsigned char *block, struct fb_videomode *mode)
static int get_std_timing(unsigned char *block, struct fb_videomode *mode)
{
int xres, yres = 0, refresh, ratio, i;
-
+
xres = (block[0] + 31) * 8;
if (xres <= 256)
return 0;
@@ -519,7 +519,7 @@ static int get_std_timing(unsigned char *block, struct fb_videomode *mode)
DPRINTK(" %dx%d@...z\n", xres, yres, refresh);
for (i = 0; i < VESA_MODEDB_SIZE; i++) {
- if (vesa_modes[i].xres == xres &&
+ if (vesa_modes[i].xres == xres &&
vesa_modes[i].yres == yres &&
vesa_modes[i].refresh == refresh) {
*mode = vesa_modes[i];
@@ -536,13 +536,13 @@ static int get_dst_timing(unsigned char *block,
{
int j, num = 0;
- for (j = 0; j < 6; j++, block+= STD_TIMING_DESCRIPTION_SIZE)
+ for (j = 0; j < 6; j++, block+= STD_TIMING_DESCRIPTION_SIZE)
num += get_std_timing(block, &mode[num]);
return num;
}
-static void get_detailed_timing(unsigned char *block,
+static void get_detailed_timing(unsigned char *block,
struct fb_videomode *mode)
{
mode->xres = H_ACTIVE;
@@ -553,7 +553,7 @@ static void get_detailed_timing(unsigned char *block,
mode->right_margin = H_SYNC_OFFSET;
mode->left_margin = (H_ACTIVE + H_BLANKING) -
(H_ACTIVE + H_SYNC_OFFSET + H_SYNC_WIDTH);
- mode->upper_margin = V_BLANKING - V_SYNC_OFFSET -
+ mode->upper_margin = V_BLANKING - V_SYNC_OFFSET -
V_SYNC_WIDTH;
mode->lower_margin = V_SYNC_OFFSET;
mode->hsync_len = H_SYNC_WIDTH;
@@ -597,7 +597,7 @@ static struct fb_videomode *fb_create_modedb(unsigned char *edid, int *dbsize)
if (mode == NULL)
return NULL;
- if (edid == NULL || !edid_checksum(edid) ||
+ if (edid == NULL || !edid_checksum(edid) ||
!edid_check_header(edid)) {
kfree(mode);
return NULL;
@@ -632,7 +632,7 @@ static struct fb_videomode *fb_create_modedb(unsigned char *edid, int *dbsize)
if (block[0] == 0x00 && block[1] == 0x00 && block[3] == 0xfa)
num += get_dst_timing(block + 5, &mode[num]);
}
-
+
/* Yikes, EDID data is totally useless */
if (!num) {
kfree(mode);
@@ -713,7 +713,7 @@ static int fb_get_monitor_limits(unsigned char *edid, struct fb_monspecs *specs)
hscan = (pixclock + htotal / 2) / htotal;
hscan = (hscan + 500) / 1000 * 1000;
hz = (hscan + vtotal / 2) / vtotal;
-
+
if (specs->dclkmax == 0 || specs->dclkmax < pixclock)
specs->dclkmax = pixclock;
@@ -966,8 +966,8 @@ void fb_edid_to_monspecs(unsigned char *edid, struct fb_monspecs *specs)
DPRINTK("========================================\n");
}
-/*
- * VESA Generalized Timing Formula (GTF)
+/*
+ * VESA Generalized Timing Formula (GTF)
*/
#define FLYBACK 550
@@ -996,7 +996,7 @@ struct __fb_timings {
* @hfreq: horizontal freq
*
* DESCRIPTION:
- * vblank = right_margin + vsync_len + left_margin
+ * vblank = right_margin + vsync_len + left_margin
*
* given: right_margin = 1 (V_FRONTPORCH)
* vsync_len = 3
@@ -1010,12 +1010,12 @@ static u32 fb_get_vblank(u32 hfreq)
{
u32 vblank;
- vblank = (hfreq * FLYBACK)/1000;
+ vblank = (hfreq * FLYBACK)/1000;
vblank = (vblank + 500)/1000;
return (vblank + V_FRONTPORCH);
}
-/**
+/**
* fb_get_hblank_by_freq - get horizontal blank time given hfreq
* @hfreq: horizontal freq
* @xres: horizontal resolution in pixels
@@ -1031,7 +1031,7 @@ static u32 fb_get_vblank(u32 hfreq)
*
* where: C = ((offset - scale factor) * blank_scale)
* -------------------------------------- + scale factor
- * 256
+ * 256
* M = blank_scale * gradient
*
*/
@@ -1039,7 +1039,7 @@ static u32 fb_get_hblank_by_hfreq(u32 hfreq, u32 xres)
{
u32 c_val, m_val, duty_cycle, hblank;
- c_val = (((H_OFFSET - H_SCALEFACTOR) * H_BLANKSCALE)/256 +
+ c_val = (((H_OFFSET - H_SCALEFACTOR) * H_BLANKSCALE)/256 +
H_SCALEFACTOR) * 1000;
m_val = (H_BLANKSCALE * H_GRADIENT)/256;
m_val = (m_val * 1000000)/hfreq;
@@ -1048,7 +1048,7 @@ static u32 fb_get_hblank_by_hfreq(u32 hfreq, u32 xres)
return (hblank);
}
-/**
+/**
* fb_get_hblank_by_dclk - get horizontal blank time given pixelclock
* @dclk: pixelclock in Hz
* @xres: horizontal resolution in pixels
@@ -1061,7 +1061,7 @@ static u32 fb_get_hblank_by_hfreq(u32 hfreq, u32 xres)
*
* duty cycle = percent of htotal assigned to inactive display
* duty cycle = C - (M * h_period)
- *
+ *
* where: h_period = SQRT(100 - C + (0.4 * xres * M)/dclk) + C - 100
* -----------------------------------------------
* 2 * M
@@ -1077,11 +1077,11 @@ static u32 fb_get_hblank_by_dclk(u32 dclk, u32 xres)
h_period = 100 - C_VAL;
h_period *= h_period;
h_period += (M_VAL * xres * 2 * 1000)/(5 * dclk);
- h_period *=10000;
+ h_period *=10000;
h_period = int_sqrt(h_period);
h_period -= (100 - C_VAL) * 100;
- h_period *= 1000;
+ h_period *= 1000;
h_period /= 2 * M_VAL;
duty_cycle = C_VAL * 1000 - (M_VAL * h_period)/100;
@@ -1089,7 +1089,7 @@ static u32 fb_get_hblank_by_dclk(u32 dclk, u32 xres)
hblank &= ~15;
return (hblank);
}
-
+
/**
* fb_get_hfreq - estimate hsync
* @vfreq: vertical refresh rate
@@ -1100,13 +1100,13 @@ static u32 fb_get_hblank_by_dclk(u32 dclk, u32 xres)
* (yres + front_port) * vfreq * 1000000
* hfreq = -------------------------------------
* (1000000 - (vfreq * FLYBACK)
- *
+ *
*/
static u32 fb_get_hfreq(u32 vfreq, u32 yres)
{
u32 divisor, hfreq;
-
+
divisor = (1000000 - (vfreq * FLYBACK))/1000;
hfreq = (yres + V_FRONTPORCH) * vfreq * 1000;
return (hfreq/divisor);
@@ -1117,7 +1117,7 @@ static void fb_timings_vfreq(struct __fb_timings *timings)
timings->hfreq = fb_get_hfreq(timings->vfreq, timings->vactive);
timings->vblank = fb_get_vblank(timings->hfreq);
timings->vtotal = timings->vactive + timings->vblank;
- timings->hblank = fb_get_hblank_by_hfreq(timings->hfreq,
+ timings->hblank = fb_get_hblank_by_hfreq(timings->hfreq,
timings->hactive);
timings->htotal = timings->hactive + timings->hblank;
timings->dclk = timings->htotal * timings->hfreq;
@@ -1128,7 +1128,7 @@ static void fb_timings_hfreq(struct __fb_timings *timings)
timings->vblank = fb_get_vblank(timings->hfreq);
timings->vtotal = timings->vactive + timings->vblank;
timings->vfreq = timings->hfreq/timings->vtotal;
- timings->hblank = fb_get_hblank_by_hfreq(timings->hfreq,
+ timings->hblank = fb_get_hblank_by_hfreq(timings->hfreq,
timings->hactive);
timings->htotal = timings->hactive + timings->hblank;
timings->dclk = timings->htotal * timings->hfreq;
@@ -1136,7 +1136,7 @@ static void fb_timings_hfreq(struct __fb_timings *timings)
static void fb_timings_dclk(struct __fb_timings *timings)
{
- timings->hblank = fb_get_hblank_by_dclk(timings->dclk,
+ timings->hblank = fb_get_hblank_by_dclk(timings->dclk,
timings->hactive);
timings->htotal = timings->hactive + timings->hblank;
timings->hfreq = timings->dclk/timings->htotal;
@@ -1156,29 +1156,29 @@ static void fb_timings_dclk(struct __fb_timings *timings)
* @info: pointer to fb_info
*
* DESCRIPTION:
- * Calculates video mode based on monitor specs using VESA GTF.
- * The GTF is best for VESA GTF compliant monitors but is
+ * Calculates video mode based on monitor specs using VESA GTF.
+ * The GTF is best for VESA GTF compliant monitors but is
* specifically formulated to work for older monitors as well.
*
- * If @flag==0, the function will attempt to maximize the
+ * If @flag==0, the function will attempt to maximize the
* refresh rate. Otherwise, it will calculate timings based on
- * the flag and accompanying value.
+ * the flag and accompanying value.
*
- * If FB_IGNOREMON bit is set in @flags, monitor specs will be
+ * If FB_IGNOREMON bit is set in @flags, monitor specs will be
* ignored and @var will be filled with the calculated timings.
*
* All calculations are based on the VESA GTF Spreadsheet
* available at VESA's public ftp (http://www.vesa.org).
- *
+ *
* NOTES:
* The timings generated by the GTF will be different from VESA
* DMT. It might be a good idea to keep a table of standard
* VESA modes as well. The GTF may also not work for some displays,
* such as, and especially, analog TV.
- *
+ *
* REQUIRES:
* A valid info->monspecs, otherwise 'safe numbers' will be used.
- */
+ */
int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_info *info)
{
struct __fb_timings *timings;
@@ -1191,7 +1191,7 @@ int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_inf
if (!timings)
return -ENOMEM;
- /*
+ /*
* If monspecs are invalid, use values that are enough
* for 640x480@60
*/
@@ -1214,7 +1214,7 @@ int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_inf
timings->hactive = var->xres;
timings->vactive = var->yres;
- if (var->vmode & FB_VMODE_INTERLACED) {
+ if (var->vmode & FB_VMODE_INTERLACED) {
timings->vactive /= 2;
interlace = 2;
}
@@ -1250,9 +1250,9 @@ int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_inf
break;
default:
err = -EINVAL;
-
- }
-
+
+ }
+
if (err || (!(flags & FB_IGNOREMON) &&
(timings->vfreq < vfmin || timings->vfreq > vfmax ||
timings->hfreq < hfmin || timings->hfreq > hfmax ||
@@ -1269,7 +1269,7 @@ int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_inf
var->upper_margin = (timings->vblank * interlace)/dscan -
(var->vsync_len + var->lower_margin);
}
-
+
kfree(timings);
return err;
}
@@ -1291,7 +1291,7 @@ int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var,
return -EINVAL;
}
#endif /* CONFIG_FB_MODE_HELPERS */
-
+
/*
* fb_validate_mode - validates var against monitor capabilities
* @var: pointer to fb_var_screeninfo
@@ -1309,7 +1309,7 @@ int fb_validate_mode(const struct fb_var_screeninfo *var, struct fb_info *info)
u32 hfreq, vfreq, htotal, vtotal, pixclock;
u32 hfmin, hfmax, vfmin, vfmax, dclkmin, dclkmax;
- /*
+ /*
* If monspecs are invalid, use values that are enough
* for 640x480@60
*/
@@ -1333,10 +1333,10 @@ int fb_validate_mode(const struct fb_var_screeninfo *var, struct fb_info *info)
if (!var->pixclock)
return -EINVAL;
pixclock = PICOS2KHZ(var->pixclock) * 1000;
-
- htotal = var->xres + var->right_margin + var->hsync_len +
+
+ htotal = var->xres + var->right_margin + var->hsync_len +
var->left_margin;
- vtotal = var->yres + var->lower_margin + var->vsync_len +
+ vtotal = var->yres + var->lower_margin + var->vsync_len +
var->upper_margin;
if (var->vmode & FB_VMODE_INTERLACED)
@@ -1349,7 +1349,7 @@ int fb_validate_mode(const struct fb_var_screeninfo *var, struct fb_info *info)
vfreq = hfreq/vtotal;
- return (vfreq < vfmin || vfreq > vfmax ||
+ return (vfreq < vfmin || vfreq > vfmax ||
hfreq < hfmin || hfreq > hfmax ||
pixclock < dclkmin || pixclock > dclkmax) ?
-EINVAL : 0;
--
1.4.4.4
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists