Initializing cgroup subsys cpuset Linux version 2.6.24-rc3-gdea7d55d (tomc@localhost) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #60 SMP PREEMPT Sat Dec 1 20:54:18 CET 2007 Command line: auto BOOT_IMAGE=2.6.git ro root=802 resume=/dev/sda4 acpi_sleep=s3_bios,s3_mode thinkpad_acpi.fan_control=1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007d6b0000 (usable) BIOS-e820: 000000007d6b0000 - 000000007d6cc000 (ACPI data) BIOS-e820: 000000007d6cc000 - 000000007d700000 (ACPI NVS) BIOS-e820: 000000007d700000 - 000000007e000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 157) 0 entries of 256 used Entering add_active_range(0, 256, 513712) 1 entries of 256 used end_pfn_map = 1048576 DMI present. ACPI: RSDP 000F6950, 0024 (r2 LENOVO) ACPI: XSDT 7D6BCEF0, 0094 (r1 LENOVO TP-7S 1070 LTP 0) ACPI: FACP 7D6BD000, 00F4 (r3 LENOVO TP-7S 1070 LNVO 1) ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] ACPI: DSDT 7D6BD3DB, E7A2 (r1 LENOVO TP-7S 1070 MSFT 3000000) ACPI: FACS 7D6E4000, 0040 ACPI: SSDT 7D6BD1B4, 0227 (r1 LENOVO TP-7S 1070 MSFT 3000000) ACPI: ECDT 7D6CBB7D, 0052 (r1 LENOVO TP-7S 1070 LNVO 1) ACPI: TCPA 7D6CBBCF, 0032 (r2 LENOVO TP-7S 1070 LNVO 1) ACPI: APIC 7D6CBC01, 0068 (r1 LENOVO TP-7S 1070 LNVO 1) ACPI: MCFG 7D6CBC69, 003C (r1 LENOVO TP-7S 1070 LNVO 1) ACPI: HPET 7D6CBCA5, 0038 (r1 LENOVO TP-7S 1070 LNVO 1) ACPI: SLIC 7D6CBDF0, 0176 (r1 LENOVO TP-7S 1070 LTP 0) ACPI: BOOT 7D6CBF66, 0028 (r1 LENOVO TP-7S 1070 LTP 1) ACPI: ASF! 7D6CBF8E, 0072 (r16 LENOVO TP-7S 1070 PTL 1) ACPI: SSDT 7D6E2697, 025F (r1 LENOVO TP-7S 1070 INTL 20050513) ACPI: SSDT 7D6E28F6, 00A6 (r1 LENOVO TP-7S 1070 INTL 20050513) ACPI: SSDT 7D6E299C, 04F7 (r1 LENOVO TP-7S 1070 INTL 20050513) ACPI: SSDT 7D6E2E93, 01D8 (r1 LENOVO TP-7S 1070 INTL 20050513) Entering add_active_range(0, 0, 157) 0 entries of 256 used Entering add_active_range(0, 256, 513712) 1 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 157 0: 256 -> 513712 On node 0 totalpages: 513613 DMA zone: 56 pages used for memmap DMA zone: 1814 pages reserved DMA zone: 2127 pages, LIFO batch:0 DMA32 zone: 6967 pages used for memmap DMA32 zone: 502649 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 33312 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504776 Kernel command line: auto BOOT_IMAGE=2.6.git ro root=802 resume=/dev/sda4 acpi_sleep=s3_bios,s3_mode thinkpad_acpi.fan_control=1 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 hpet clockevent registered TSC calibrated against HPET Marking TSC unstable due to TSCs unsynchronized time.c: Detected 1595.993 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... Memory: 2015512k/2054848k available (4454k kernel code, 38608k reserved, 1871k data, 244k init) SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 3195.86 BogoMIPS (lpj=1597931) Mount-cache hash table entries: 256 Initializing cgroup subsys debug Initializing cgroup subsys ns CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 12468704 Detected 12.468 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3191.84 BogoMIPS (lpj=1595921) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz stepping 0b Brought up 2 CPUs net_namespace: 120 bytes Time: 6:56:10 Date: 12/02/07 NET: Registered protocol family 16 ACPI: ACPI Dock Station Driver ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added ACPI: bus type pci registered PCI: Using MMCONFIG at f0000000 - f3ffffff ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnpacpi: exceeded the max number of mem resources: 12 pnpacpi: exceeded the max number of mem resources: 12 pnpacpi: exceeded the max number of mem resources: 12 pnpacpi: exceeded the max number of mem resources: 12 pnpacpi: exceeded the max number of mem resources: 12 pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:08: Plug and Play ACPI device, IDs LEN0003 PNP0303 (active) pnp 00:09: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active) pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (disabled) pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (disabled) pnp 00:0c: Plug and Play ACPI device, IDs WACf004 (disabled) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report DMAR:No DMAR devices found PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Time: hpet clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: the driver 'system' has been registered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff has been reserved system 00:00: iomem range 0xc4000-0xc7fff has been reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff has been reserved system 00:00: iomem range 0x0-0x0 could not be reserved system 00:00: iomem range 0x0-0x0 could not be reserved system 00:00: iomem range 0x0-0x0 could not be reserved system 00:00: iomem range 0x0-0x0 could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: driver attached system 00:02: ioport range 0x164e-0x164f has been reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x800-0x80f has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x165f could not be reserved system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved system 00:02: iomem range 0xfed40000-0xfed44fff could not be reserved system 00:02: driver attached PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: f4000000-f5ffffff PREFETCH window: f8500000-f85fffff PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: f6000000-f7ffffff PREFETCH window: f8600000-f86fffff PCI: Bus 6, cardbus bridge: 0000:05:00.0 IO window: 00004000-000040ff IO window: 00004400-000044ff PREFETCH window: d8000000-dbffffff MEM window: 80000000-83ffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-7fff MEM window: d4000000-d7efffff PREFETCH window: d8000000-dbffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:05:00.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Simple Boot Flag at 0x35 set to 0x1 IA-32 Microcode Update Driver: v1.14a Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] ALI M7101 PMU not found. vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20004100000, using 7616k, total 7616k vesafb: mode is 1280x1024x32, linelength=5120, pages=0 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery absent) input: Power Button (FF) as /devices/virtual/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/virtual/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /devices/virtual/input/input2 ACPI: Sleep Button (CM) [SLPB] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input4 ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) ACPI: SSDT 7D6E1D72, 0282 (r1 PmRef Cpu0Ist 100 INTL 20050513) ACPI: SSDT 7D6E2079, 061E (r1 PmRef Cpu0Cst 100 INTL 20050513) WARNING: at arch/x86/kernel/smp_64.c:427 smp_call_function_single() Pid: 1, comm: swapper Not tainted 2.6.24-rc3-gdea7d55d #60 Call Trace: [] acpi_ut_update_ref_count+0x4e/0x9b [] smp_call_function_single+0x101/0x110 [] _rdmsr_on_cpu+0x5c/0x60 [] acpi_processor_get_throttling_ptc+0xf0/0x156 [] acpi_processor_get_throttling_info+0x3cc/0x4a2 [] acpi_processor_start+0x5a1/0x634 [] kmem_cache_alloc+0x9b/0xa0 [] acpi_start_single_object+0x21/0x45 [] acpi_device_probe+0x77/0x8a [] __driver_attach+0x0/0xb0 [] driver_probe_device+0xa7/0x1d0 [] __driver_attach+0x0/0xb0 [] __driver_attach+0xa5/0xb0 [] bus_for_each_dev+0x4d/0x80 [] bus_add_driver+0x9f/0x200 [] acpi_processor_init+0x93/0x100 [] kernel_init+0x154/0x330 [] finish_task_switch+0x31/0x90 [] child_rip+0xa/0x12 [] kernel_init+0x0/0x330 [] child_rip+0x0/0x12 WARNING: at arch/x86/kernel/smp_64.c:397 smp_call_function_mask() Pid: 1, comm: swapper Not tainted 2.6.24-rc3-gdea7d55d #60 Call Trace: [] smp_call_function_mask+0x95/0xa0 [] smp_call_function_single+0x65/0x110 [] _rdmsr_on_cpu+0x5c/0x60 [] acpi_processor_get_throttling_ptc+0xf0/0x156 [] acpi_processor_get_throttling_info+0x3cc/0x4a2 [] acpi_processor_start+0x5a1/0x634 [] kmem_cache_alloc+0x9b/0xa0 [] acpi_start_single_object+0x21/0x45 [] acpi_device_probe+0x77/0x8a [] __driver_attach+0x0/0xb0 [] driver_probe_device+0xa7/0x1d0 [] __driver_attach+0x0/0xb0 [] __driver_attach+0xa5/0xb0 [] bus_for_each_dev+0x4d/0x80 [] bus_add_driver+0x9f/0x200 [] acpi_processor_init+0x93/0x100 [] kernel_init+0x154/0x330 [] finish_task_switch+0x31/0x90 [] child_rip+0xa/0x12 [] kernel_init+0x0/0x330 [] child_rip+0x0/0x12 WARNING: at arch/x86/kernel/smp_64.c:427 smp_call_function_single() Pid: 1, comm: swapper Not tainted 2.6.24-rc3-gdea7d55d #60 Call Trace: [] smp_call_function_single+0x101/0x110 [] _wrmsr_on_cpu+0x4b/0x60 [] acpi_processor_set_throttling_ptc+0x101/0x129 [] acpi_processor_get_throttling_info+0x3e7/0x4a2 [] acpi_processor_start+0x5a1/0x634 [] kmem_cache_alloc+0x9b/0xa0 [] acpi_start_single_object+0x21/0x45 [] acpi_device_probe+0x77/0x8a [] __driver_attach+0x0/0xb0 [] driver_probe_device+0xa7/0x1d0 [] __driver_attach+0x0/0xb0 [] __driver_attach+0xa5/0xb0 [] bus_for_each_dev+0x4d/0x80 [] bus_add_driver+0x9f/0x200 [] acpi_processor_init+0x93/0x100 [] kernel_init+0x154/0x330 [] finish_task_switch+0x31/0x90 [] child_rip+0xa/0x12 [] kernel_init+0x0/0x330 [] child_rip+0x0/0x12 WARNING: at arch/x86/kernel/smp_64.c:397 smp_call_function_mask() Pid: 1, comm: swapper Not tainted 2.6.24-rc3-gdea7d55d #60 Call Trace: [] smp_call_function_mask+0x95/0xa0 [] smp_call_function_single+0x65/0x110 [] _wrmsr_on_cpu+0x4b/0x60 [] acpi_processor_set_throttling_ptc+0x101/0x129 [] acpi_processor_get_throttling_info+0x3e7/0x4a2 [] acpi_processor_start+0x5a1/0x634 [] kmem_cache_alloc+0x9b/0xa0 [] acpi_start_single_object+0x21/0x45 [] acpi_device_probe+0x77/0x8a [] __driver_attach+0x0/0xb0 [] driver_probe_device+0xa7/0x1d0 [] __driver_attach+0x0/0xb0 [] __driver_attach+0xa5/0xb0 [] bus_for_each_dev+0x4d/0x80 [] bus_add_driver+0x9f/0x200 [] acpi_processor_init+0x93/0x100 [] kernel_init+0x154/0x330 [] finish_task_switch+0x31/0x90 [] child_rip+0xa/0x12 [] kernel_init+0x0/0x330 [] child_rip+0x0/0x12 Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7D6E1CAA, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) ACPI: SSDT 7D6E1FF4, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) WARNING: at arch/x86/kernel/smp_64.c:427 smp_call_function_single() Pid: 1, comm: swapper Not tainted 2.6.24-rc3-gdea7d55d #60 Call Trace: [] acpi_ut_update_ref_count+0x4e/0x9b [] smp_call_function_single+0x101/0x110 [] _rdmsr_on_cpu+0x5c/0x60 [] acpi_processor_get_throttling_ptc+0xf0/0x156 [] acpi_processor_get_throttling_info+0x3cc/0x4a2 [] acpi_processor_start+0x5a1/0x634 [] sysfs_find_dirent+0x29/0x40 [] kmem_cache_alloc+0x9b/0xa0 [] acpi_start_single_object+0x21/0x45 [] acpi_device_probe+0x77/0x8a [] __driver_attach+0x0/0xb0 [] driver_probe_device+0xa7/0x1d0 [] __driver_attach+0x0/0xb0 [] __driver_attach+0xa5/0xb0 [] bus_for_each_dev+0x4d/0x80 [] bus_add_driver+0x9f/0x200 [] acpi_processor_init+0x93/0x100 [] kernel_init+0x154/0x330 [] finish_task_switch+0x31/0x90 [] child_rip+0xa/0x12 [] kernel_init+0x0/0x330 [] child_rip+0x0/0x12 WARNING: at arch/x86/kernel/smp_64.c:427 smp_call_function_single() Pid: 1, comm: swapper Not tainted 2.6.24-rc3-gdea7d55d #60 Call Trace: [] smp_call_function_single+0x101/0x110 [] _wrmsr_on_cpu+0x4b/0x60 [] acpi_processor_set_throttling_ptc+0x101/0x129 [] acpi_processor_get_throttling_info+0x3e7/0x4a2 [] acpi_processor_start+0x5a1/0x634 [] sysfs_find_dirent+0x29/0x40 [] kmem_cache_alloc+0x9b/0xa0 [] acpi_start_single_object+0x21/0x45 [] acpi_device_probe+0x77/0x8a [] __driver_attach+0x0/0xb0 [] driver_probe_device+0xa7/0x1d0 [] __driver_attach+0x0/0xb0 [] __driver_attach+0xa5/0xb0 [] bus_for_each_dev+0x4d/0x80 [] bus_add_driver+0x9f/0x200 [] acpi_processor_init+0x93/0x100 [] kernel_init+0x154/0x330 [] finish_task_switch+0x31/0x90 [] child_rip+0xa/0x12 [] kernel_init+0x0/0x330 [] child_rip+0x0/0x12 ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (36 C) ACPI: Thermal Zone [THM1] (37 C) Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 agpgart: Detected an Intel 965GM Chipset. agpgart: Detected 7676K stolen memory. agpgart: AGP aperture is 256M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled pnp: the driver 'serial' has been registered pnp: Res cnt 2 pnp: res cnt 2 pnp: Encode io pnp: Encode irq serial 00:0a: activated 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 00:0a: driver attached pnp: Res cnt 2 pnp: res cnt 2 pnp: Encode io pnp: Encode irq serial 00:0c: activated 00:0c: ttyS1 at I/O 0x200 (irq = 5) is a NS16550A serial 00:0c: driver attached loop: module loaded nbd: registered device at major 43 thinkpad_acpi: ThinkPad ACPI Extras v0.17 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7SET21WW (1.07 ), EC 7RHT16WW-1.02 thinkpad_acpi: Lenovo ThinkPad X61 Tablet thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: standard ACPI backlight interface available, not loading native one... input: ThinkPad Extra Buttons as /devices/virtual/input/input5 Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:d3:ce:57:d9 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 e1000e: Copyright (c) 1999-2007 Intel Corporation. SCSI Media Changer driver v0.25 ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match, using nr_ports ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x7 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426100 irq 317 ata2: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426180 irq 317 ata3: SATA max UDMA/133 abar m2048@0xf8426000 port 0xf8426200 irq 317 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: HITACHI HTS541680J9SA00, SB2IC7UP, max UDMA/100 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 0) ata3: SATA link down (SStatus 0 SControl 0) scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54168 SB2I PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15 ata4.00: ATAPI: DVD/CDRW UJDA775, CB03, max UDMA/33 ata4.00: configured for UDMA/33 ata5: port disabled. ignoring. scsi 3:0:0:0: CD-ROM MATSHITA DVD/CDRW UJDA775 CB03 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg1 type 5 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 usb 1-1: new full speed USB device using uhci_hcd and address 2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller usb 1-1: configuration #1 chosen from 1 choice uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usb 2-2: new full speed USB device using uhci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected usbcore: registered new interface driver usb-storage USB Mass Storage support registered. pnp: the driver 'i8042 kbd' has been registered i8042 kbd 00:08: driver attached pnp: the driver 'i8042 aux' has been registered i8042 aux 00:09: driver attached PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7 i2c-parport-light: adapter type unspecified cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:20ac PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA device list: #0: HDA Intel at 0xf8220000 irq 17 TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 RPC: Registered udp transport module. RPC: Registered tcp transport module. swsusp: Resume From Partition /dev/sda4 PM: Checking swsusp image. PM: Resume from disk failed. Magic number: 3:710:922 UDF-fs: No VRS found XFS mounting filesystem sda2 Ending clean XFS mount for filesystem: sda2 VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 244k freed ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 5 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf8426c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 4 ports detected usb 2-2: USB disconnect, address 2 ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf8427000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.17ks iwl4965: Copyright(c) 2003-2007 Intel Corporation ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.0 to 64 iwl4965: Detected Intel Wireless WiFi Link 4965AGN usb 5-4: new high speed USB device using ehci_hcd and address 3 usb 5-4: configuration #1 chosen from 1 choice hub 5-4:1.0: USB hub found hub 5-4:1.0: 4 ports detected iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels phy0: Selected rate control algorithm 'iwl-4965-rs' usb 1-1: USB disconnect, address 2 usb 1-1: new full speed USB device using uhci_hcd and address 3 usb 1-1: configuration #1 chosen from 1 choice XFS mounting filesystem sda3 Ending clean XFS mount for filesystem: sda3 Adding 4882396k swap on /dev/sda4. Priority:1 extents:1 across:4882396k Clocksource tsc unstable (delta = -72484678 ns) iwl4965: Radio Frequency Kill Switch is On: Kill switch must be turned off for wireless networking to work. Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.00 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. PM: Entering mem sleep Suspending console(s) sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Stopping disk serial 00:0c: disabled serial 00:0a: disabled iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC Disabling non-boot CPUs ... CPU 1 is now offline SMP alternatives: switching to UP code CPU1 is down Extended CMOS year: 2000 Back to C! Extended CMOS year: 2000 Enabling non-boot CPUs ... SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3192.20 BogoMIPS (lpj=1596101) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz stepping 0b CPU1 is up Switched to high resolution mode on CPU 1 ACPI: EC: missing write data confirmation, don't expect it any longer. PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 usb usb1: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.7 to 64 PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20002020, writing 2020) PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.0 to 64 PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata5: port disabled. ignoring. PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407) PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata4.00: configured for UDMA/33 Coming out of suspend... PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100106, writing 40100506) iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC ata3: SATA link down (SStatus 0 SControl 0) ata2: SATA link down (SStatus 0 SControl 0) ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 i8042 kbd 00:08: activation not supported i8042 aux 00:09: activation not supported pnp: Res cnt 2 pnp: res cnt 2 pnp: Encode io pnp: Encode irq serial 00:0a: activated pnp: Res cnt 2 pnp: res cnt 2 pnp: Encode io pnp: Encode irq serial 00:0c: activated sd 0:0:0:0: [sda] Starting disk iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC ata1.00: configured for UDMA/100 iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC ata1.00: configured for UDMA/100 ata1: EH complete sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: Radio disabled by HW RF Kill switch PM: Finishing wakeup. Restarting tasks ... <6>usb 1-1: USB disconnect, address 3 done. usb 1-1: new full speed USB device using uhci_hcd and address 4 irq 19: nobody cared (try booting with the "irqpoll" option) Pid: 0, comm: swapper Not tainted 2.6.24-rc3-gdea7d55d #60 Call Trace: [] __report_bad_irq+0x1e/0x80 [] note_interrupt+0x29c/0x2e0 [] handle_fasteoi_irq+0xdd/0x110 [] do_IRQ+0x7b/0x100 [] ret_from_intr+0x0/0xa [] acpi_idle_enter_bm+0x26a/0x2d4 [] acpi_idle_enter_bm+0x260/0x2d4 [] cpuidle_idle_call+0xa2/0xe0 [] cpuidle_idle_call+0x0/0xe0 [] cpu_idle+0x75/0xf0 [] start_kernel+0x26a/0x2b0 [] _sinittext+0x117/0x120 handlers: [] (usb_hcd_irq+0x0/0x60) Disabling IRQ #19 usb 1-1: configuration #1 chosen from 1 choice iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: WARNING: Requesting MAC access during RFKILL wakes up NIC iwl4965: Radio disabled by HW RF Kill switch e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized i915 1.6.0 20060119 on minor 0