[ 0.000000] Linux version 2.6.24-rc4 (root@lpsdm60) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 SMP Tue Dec 4 12:20:27 CET 2007 [ 0.000000] Command line: ro root=/dev/sda3 rhgb quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable) [ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffcb440 (usable) [ 0.000000] BIOS-e820: 00000000bffcb440 - 00000000bffceac0 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffceac0 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 154) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786379) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 2359296) 2 entries of 3200 used [ 0.000000] end_pfn_map = 2359296 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FDFD0, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT BFFCE9C0, 004C (r1 IBM SERVALNT 1000 IBM 45444F43) [ 0.000000] ACPI: FACP BFFCE900, 0084 (r2 IBM SERVALNT 1000 IBM 45444F43) [ 0.000000] ACPI: DSDT BFFCB440, 2C02 (r2 IBM SERVALNT 1000 INTL 20041203) [ 0.000000] ACPI: FACS BFFCE640, 0040 [ 0.000000] ACPI: APIC BFFCE840, 0084 (r1 IBM SERVALNT 1000 IBM 45444F43) [ 0.000000] ACPI: SRAT BFFCE700, 00E8 (r1 IBM SERVALNT 1000 IBM 45444F43) [ 0.000000] ACPI: HPET BFFCE6C0, 0038 (r1 IBM SERVALNT 1000 IBM 45444F43) [ 0.000000] ACPI: MCFG BFFCE680, 003C (r1 IBM SERVALNT 1000 IBM 45444F43) [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 6 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 7 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] Entering add_active_range(0, 0, 154) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786379) 1 entries of 3200 used [ 0.000000] SRAT: Node 0 PXM 0 0-240000000 [ 0.000000] Entering add_active_range(0, 0, 154) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786379) 2 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 2359296) 2 entries of 3200 used [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 2359296 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 154 [ 0.000000] 0: 256 -> 786379 [ 0.000000] 0: 1048576 -> 2359296 [ 0.000000] On node 0 totalpages: 2096997 [ 0.000000] DMA zone: 96 pages used for memmap [ 0.000000] DMA zone: 2876 pages reserved [ 0.000000] DMA zone: 1022 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 24480 pages used for memmap [ 0.000000] DMA32 zone: 757803 pages, LIFO batch:31 [ 0.000000] Normal zone: 30720 pages used for memmap [ 0.000000] Normal zone: 1280000 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x588 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) [ 0.000000] Processor #6 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) [ 0.000000] Processor #7 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 14, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] PERCPU: Allocating 425712 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2038825 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: ro root=/dev/sda3 rhgb quiet [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 150.294772] time.c: Detected 2327.499 MHz processor. [ 150.296871] Console: colour VGA+ 80x25 [ 150.296878] console [tty0] enabled [ 150.296892] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 150.296894] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 150.296895] ... MAX_LOCK_DEPTH: 30 [ 150.296896] ... MAX_LOCKDEP_KEYS: 2048 [ 150.296898] ... CLASSHASH_SIZE: 1024 [ 150.296899] ... MAX_LOCKDEP_ENTRIES: 8192 [ 150.296900] ... MAX_LOCKDEP_CHAINS: 16384 [ 150.296901] ... CHAINHASH_SIZE: 8192 [ 150.296903] memory used by lock dependency info: 1712 kB [ 150.296904] per task-struct memory footprint: 2160 bytes [ 150.296906] Checking aperture... [ 150.296915] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 150.329006] Placing software IO TLB between 0x123c000 - 0x523c000 [ 150.438786] Memory: 8086096k/9437184k available (2900k kernel code, 301892k reserved, 1531k data, 776k init) [ 150.516276] Calibrating delay using timer specific routine.. 4659.70 BogoMIPS (lpj=9319412) [ 150.516372] Security Framework initialized [ 150.516378] SELinux: Initializing. [ 150.516416] SELinux: Starting in permissive mode [ 150.516422] selinux_register_security: Registering secondary module capability [ 150.516424] Capability LSM initialized as secondary [ 150.517158] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 150.522863] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 150.525638] Mount-cache hash table entries: 256 [ 150.526042] CPU: L1 I cache: 32K, L1 D cache: 32K [ 150.526045] CPU: L2 cache: 4096K [ 150.526047] CPU 0/0 -> Node 0 [ 150.526048] using mwait in idle threads. [ 150.526050] CPU: Physical Processor ID: 0 [ 150.526051] CPU: Processor Core ID: 0 [ 150.526057] CPU0: Thermal monitoring enabled (TM2) [ 150.526069] Freeing SMP alternatives: 23k freed [ 150.527698] ACPI: Core revision 20070126 [ 150.570363] Using local APIC timer interrupts. [ 150.613239] APIC timer calibration result 20781229 [ 150.613241] Detected 20.781 MHz APIC timer. [ 150.613591] lockdep: not fixing up alternatives. [ 150.613625] Booting processor 1/4 APIC 0x1 [ 150.623981] Initializing CPU#1 [ 150.701055] Calibrating delay using timer specific routine.. 4655.01 BogoMIPS (lpj=9310032) [ 150.701062] CPU: L1 I cache: 32K, L1 D cache: 32K [ 150.701064] CPU: L2 cache: 4096K [ 150.701066] CPU 1/1 -> Node 0 [ 150.701068] CPU: Physical Processor ID: 0 [ 150.701069] CPU: Processor Core ID: 1 [ 150.701075] CPU1: Thermal monitoring enabled (TM2) [ 150.701557] Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping 06 [ 150.701579] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 150.721841] lockdep: not fixing up alternatives. [ 150.721870] Booting processor 2/4 APIC 0x6 [ 150.732225] Initializing CPU#2 [ 150.808819] Calibrating delay using timer specific routine.. 4655.06 BogoMIPS (lpj=9310124) [ 150.808826] CPU: L1 I cache: 32K, L1 D cache: 32K [ 150.808828] CPU: L2 cache: 4096K [ 150.808830] CPU 2/6 -> Node 0 [ 150.808832] CPU: Physical Processor ID: 3 [ 150.808832] CPU: Processor Core ID: 0 [ 150.808838] CPU2: Thermal monitoring enabled (TM2) [ 150.809308] Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping 06 [ 150.809327] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 150.829518] lockdep: not fixing up alternatives. [ 150.829545] Booting processor 3/4 APIC 0x7 [ 150.839901] Initializing CPU#3 [ 150.916583] Calibrating delay using timer specific routine.. 4655.06 BogoMIPS (lpj=9310135) [ 150.916590] CPU: L1 I cache: 32K, L1 D cache: 32K [ 150.916591] CPU: L2 cache: 4096K [ 150.916594] CPU 3/7 -> Node 0 [ 150.916595] CPU: Physical Processor ID: 3 [ 150.916596] CPU: Processor Core ID: 1 [ 150.916602] CPU3: Thermal monitoring enabled (TM2) [ 150.917072] Intel(R) Xeon(R) CPU 5140 @ 2.33GHz stepping 06 [ 150.917099] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 150.937077] Brought up 4 CPUs [ 150.937189] CPU0 attaching sched-domain: [ 150.937191] domain 0: span 03 [ 150.937193] groups: 01 02 [ 150.937196] domain 1: span 0f [ 150.937197] groups: 03 0c [ 150.937200] domain 2: span 0f [ 150.937201] groups: 0f [ 150.937203] CPU1 attaching sched-domain: [ 150.937204] domain 0: span 03 [ 150.937206] groups: 02 01 [ 150.937208] domain 1: span 0f [ 150.937210] groups: 03 0c [ 150.937212] domain 2: span 0f [ 150.937213] groups: 0f [ 150.937215] CPU2 attaching sched-domain: [ 150.937217] domain 0: span 0c [ 150.937218] groups: 04 08 [ 150.937220] domain 1: span 0f [ 150.937222] groups: 0c 03 [ 150.937224] domain 2: span 0f [ 150.937225] groups: 0f [ 150.937227] CPU3 attaching sched-domain: [ 150.937229] domain 0: span 0c [ 150.937230] groups: 08 04 [ 150.937232] domain 1: span 0f [ 150.937234] groups: 0c 03 [ 150.937236] domain 2: span 0f [ 150.937238] groups: 0f [ 150.937755] khelper used greatest stack depth: 6032 bytes left [ 150.937905] net_namespace: 152 bytes [ 150.938489] NET: Registered protocol family 16 [ 150.938909] ACPI: bus type pci registered [ 150.940440] PCI: Using MMCONFIG at e0000000 - e25fffff [ 150.943625] ACPI: EC: Look up EC in DSDT [ 150.945707] ACPI: Interpreter enabled [ 150.945709] ACPI: (supports S0 S5) [ 150.945717] ACPI: Using IOAPIC for interrupt routing [ 150.949359] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 150.965333] PCI: Transparent bridge - 0000:00:1e.0 [ 150.965409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 150.965663] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.PCI5.PCI6._PRT] [ 150.965733] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.PCI5.PCI7._PRT] [ 150.965825] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT] [ 150.965877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 150.965940] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC2B._PRT] [ 150.971523] ACPI: PCI Interrupt Link [LP00] (IRQs *3) [ 150.971651] ACPI: PCI Interrupt Link [LP01] (IRQs *10) [ 150.971776] ACPI: PCI Interrupt Link [LP02] (IRQs *3) [ 150.971901] ACPI: PCI Interrupt Link [LP03] (IRQs *7) [ 150.972025] ACPI: PCI Interrupt Link [LP04] (IRQs *7) [ 150.972106] ACPI: Blank IRQ resource [ 150.972107] ACPI: Resource is not an IRQ entry [ 150.972204] ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled. [ 150.972332] ACPI: PCI Interrupt Link [LP06] (IRQs *11) [ 150.972456] ACPI: PCI Interrupt Link [LP07] (IRQs *5) [ 150.972625] Linux Plug and Play Support v0.97 (c) Adam Belay [ 150.972681] pnp: PnP ACPI init [ 150.972700] ACPI: bus type pnp registered [ 150.984067] pnp: PnP ACPI: found 11 devices [ 150.984070] ACPI: ACPI bus type pnp unregistered [ 150.984341] usbcore: registered new interface driver usbfs [ 150.984459] usbcore: registered new interface driver hub [ 150.984552] usbcore: registered new device driver usb [ 150.984762] PCI: Using ACPI for IRQ routing [ 150.984764] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 151.013237] PCI-GART: No AMD northbridge found. [ 151.016658] Time: tsc clocksource has been installed. [ 151.016669] Switched to high resolution mode on CPU 0 [ 151.017226] Switched to high resolution mode on CPU 1 [ 151.017399] Switched to high resolution mode on CPU 3 [ 151.017403] Switched to high resolution mode on CPU 2 [ 151.025214] system 00:01: ioport range 0x520-0x53f has been reserved [ 151.025218] system 00:01: ioport range 0x540-0x547 has been reserved [ 151.025232] system 00:08: ioport range 0xca8-0xca8 has been reserved [ 151.025235] system 00:08: ioport range 0xcac-0xcac has been reserved [ 151.025245] system 00:09: ioport range 0x400-0x43f has been reserved [ 151.025248] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 151.025251] system 00:09: ioport range 0x540-0x55f could not be reserved [ 151.025254] system 00:09: ioport range 0x560-0x57f has been reserved [ 151.025257] system 00:09: ioport range 0x580-0x5ff has been reserved [ 151.025259] system 00:09: ioport range 0x800-0x80f has been reserved [ 151.025263] system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved [ 151.025266] system 00:09: iomem range 0xfecc0000-0xfecc3fff has been reserved [ 151.025268] system 00:09: iomem range 0xfe000000-0xfe01ffff has been reserved [ 151.025271] system 00:09: iomem range 0xfe020000-0xfe6fffff has been reserved [ 151.025274] system 00:09: iomem range 0xfe700400-0xfebfffff has been reserved [ 151.025277] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved [ 151.026227] PCI: Bridge: 0000:1b:00.0 [ 151.026228] IO window: disabled. [ 151.026304] MEM window: disabled. [ 151.026395] PREFETCH window: disabled. [ 151.026490] PCI: Bridge: 0000:1b:01.0 [ 151.026533] IO window: 6000-6fff [ 151.026625] MEM window: cc000000-cdefffff [ 151.026716] PREFETCH window: disabled. [ 151.026808] PCI: Bridge: 0000:1a:00.0 [ 151.026853] IO window: 6000-6fff [ 151.026946] MEM window: cc000000-cdefffff [ 151.027036] PREFETCH window: disabled. [ 151.027174] PCI: Bridge: 0000:1a:00.3 [ 151.027175] IO window: disabled. [ 151.027265] MEM window: disabled. [ 151.027312] PREFETCH window: disabled. [ 151.027403] PCI: Bridge: 0000:00:02.0 [ 151.027405] IO window: 6000-6fff [ 151.027408] MEM window: cc000000-cdefffff [ 151.027410] PREFETCH window: disabled. [ 151.027413] PCI: Bridge: 0000:00:03.0 [ 151.027415] IO window: 5000-5fff [ 151.027418] MEM window: ce000000-cfffffff [ 151.027420] PREFETCH window: cdf00000-cdffffff [ 151.027423] PCI: Bridge: 0000:00:04.0 [ 151.027425] IO window: 8000-ffff [ 151.027427] MEM window: disabled. [ 151.027429] PREFETCH window: disabled. [ 151.027432] PCI: Bridge: 0000:00:05.0 [ 151.027433] IO window: disabled. [ 151.027436] MEM window: disabled. [ 151.027438] PREFETCH window: disabled. [ 151.027441] PCI: Bridge: 0000:00:06.0 [ 151.027443] IO window: 7000-7fff [ 151.027446] MEM window: ca000000-cbffffff [ 151.027448] PREFETCH window: disabled. [ 151.027451] PCI: Bridge: 0000:00:07.0 [ 151.027452] IO window: disabled. [ 151.027454] MEM window: disabled. [ 151.027456] PREFETCH window: disabled. [ 151.027459] PCI: Bridge: 0000:00:1c.0 [ 151.027460] IO window: disabled. [ 151.027464] MEM window: disabled. [ 151.027466] PREFETCH window: disabled. [ 151.027470] PCI: Bridge: 0000:00:1c.1 [ 151.027471] IO window: disabled. [ 151.027474] MEM window: disabled. [ 151.027477] PREFETCH window: disabled. [ 151.027481] PCI: Bridge: 0000:00:1e.0 [ 151.027483] IO window: 3000-4fff [ 151.027487] MEM window: de000000-dfffffff [ 151.027490] PREFETCH window: d0000000-ddffffff [ 151.027503] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 151.027816] PCI: Setting latency timer of device 0000:1a:00.0 to 64 [ 151.028274] PCI: Setting latency timer of device 0000:1b:00.0 to 64 [ 151.028653] ACPI: PCI Interrupt 0000:1b:01.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 151.028732] PCI: Setting latency timer of device 0000:1b:01.0 to 64 [ 151.029102] PCI: Setting latency timer of device 0000:1a:00.3 to 64 [ 151.029150] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 151.029157] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 151.029164] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 151.029172] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 151.029179] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 151.029200] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 151.029204] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 151.029226] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 20 (level, low) -> IRQ 20 [ 151.029229] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 151.029238] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 151.029324] NET: Registered protocol family 2 [ 151.069421] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 151.071268] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 151.076838] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes) [ 151.079744] TCP: Hash tables configured (established 524288 bind 65536) [ 151.079775] TCP reno registered [ 151.089347] checking if image is initramfs... it is [ 151.153981] Freeing initrd memory: 955k freed [ 151.155397] udev used greatest stack depth: 5424 bytes left [ 151.166486] VDSO: variable vdso_jiffies broken [ 151.166489] VDSO: variable vdso_vgetcpu_mode broken [ 151.166490] VDSO: variable vdso_vsyscall_gtod_data broken [ 151.168090] audit: initializing netlink socket (disabled) [ 151.168127] audit(1196771376.788:1): initialized [ 151.169071] Total HugeTLB memory allocated, 0 [ 151.169453] VFS: Disk quotas dquot_6.5.1 [ 151.169527] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 151.170271] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 151.170282] io scheduler noop registered [ 151.170284] io scheduler anticipatory registered [ 151.170287] io scheduler deadline registered [ 151.170322] io scheduler cfq registered (default) [ 151.172995] Boot video device is 0000:01:06.0 [ 151.173486] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 151.176733] ACPI: Processor [CPU0] (supports 8 throttling states) [ 151.177034] ACPI: Processor [CPU1] (supports 8 throttling states) [ 151.177131] ACPI: Processor [CPU2] (supports 8 throttling states) [ 151.177234] ACPI: Processor [CPU3] (supports 8 throttling states) [ 151.204297] Real Time Clock Driver v1.12ac [ 151.205996] intel_rng: FWH not detected [ 151.206884] Linux agpgart interface v0.102 [ 151.207339] [drm] Initialized drm 1.1.0 20060810 [ 151.207342] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 151.468068] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 151.470515] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 151.475625] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize [ 151.475641] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 151.475645] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 151.482748] Probing IDE interface ide0... [ 152.046381] Probing IDE interface ide1... [ 153.243961] hdc: HL-DT-STCD-RW/DVD DRIVE GCC-T10N, ATAPI CD/DVD-ROM drive [ 153.244054] ide1 at 0x170-0x177,0x376 on irq 15 [ 153.247297] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache [ 153.247303] Uniform CD-ROM driver Revision: 3.20 [ 153.256805] ide-floppy driver 0.99.newide [ 153.258665] PNP: No PS/2 controller found. Probing ports directly. [ 153.511318] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 153.511531] mice: PS/2 mouse device common for all mice [ 153.910455] usbcore: registered new interface driver hiddev [ 153.910623] usbcore: registered new interface driver usbhid [ 153.910627] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 153.911376] oprofile: using NMI interrupt. [ 153.911461] TCP cubic registered [ 153.911464] Initializing XFRM netlink socket [ 153.911499] NET: Registered protocol family 1 [ 153.911529] NET: Registered protocol family 17 [ 153.913378] Freeing unused kernel memory: 776k freed [ 153.953059] udevstart used greatest stack depth: 5256 bytes left [ 153.959451] SCSI subsystem initialized [ 153.963460] Adaptec aacraid driver 1.1-5[2449]-ms [ 153.963703] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 153.963710] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 154.190677] AAC0: kernel 5.2-0[11844] Mar 21 2007 [ 154.190680] AAC0: monitor 5.2-0[11844] [ 154.190681] AAC0: bios 5.2-0[11844] [ 154.190683] AAC0: serial 5889140 [ 154.190685] AAC0: 64bit support enabled. [ 154.190686] AAC0: 64 Bit DAC enabled [ 154.197947] scsi0 : ServeRAID [ 154.198546] scsi 0:0:0:0: Direct-Access ServeRA DISK1 V1.0 PQ: 0 ANSI: 2 [ 154.199187] sd 0:0:0:0: [sda] 1432576000 512-byte hardware sectors (733479 MB) [ 154.199212] sd 0:0:0:0: [sda] Write Protect is off [ 154.199214] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00 [ 154.199260] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 154.199480] sd 0:0:0:0: [sda] 1432576000 512-byte hardware sectors (733479 MB) [ 154.199508] sd 0:0:0:0: [sda] Write Protect is off [ 154.199509] sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00 [ 154.199574] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 154.199577] sda: sda1 sda2 sda3 sda4 [ 154.208662] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 154.228707] scsi 0:1:0:0: Direct-Access IBM-ESXS MAX3147RC T904 PQ: 0 ANSI: 5 [ 154.232156] scsi 0:1:1:0: Direct-Access IBM-ESXS MAX3147RC T904 PQ: 0 ANSI: 5 [ 154.237208] scsi 0:1:2:0: Direct-Access IBM-ESXS MAX3147RC T904 PQ: 0 ANSI: 5 [ 154.241295] scsi 0:1:3:0: Direct-Access IBM-ESXS MAX3147RC T904 PQ: 0 ANSI: 5 [ 154.247452] scsi 0:1:4:0: Direct-Access IBM-ESXS MAX3147RC T904 PQ: 0 ANSI: 5 [ 154.252427] scsi 0:1:5:0: Direct-Access IBM-ESXS MAX3147RC T904 PQ: 0 ANSI: 5 [ 154.328502] scsi 0:3:0:0: Enclosure IBM-ESXS VSC7160 1.06 PQ: 0 ANSI: 3 [ 154.470268] insmod used greatest stack depth: 3256 bytes left [ 154.534208] kjournald starting. Commit interval 5 seconds [ 154.534324] EXT3-fs: mounted filesystem with ordered data mode. [ 154.703803] SELinux: Disabled at runtime. [ 154.703823] audit(1196771380.332:2): selinux=0 auid=4294967295 [ 157.803605] warning: process `kmodule' used the deprecated sysctl system call with 1.23. [ 161.205950] floppy0: no floppy controllers found [ 161.306233] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 161.306237] Copyright (c) 1999-2006 Intel Corporation. [ 161.309348] ACPI: PCI Interrupt 0000:24:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 161.309435] PCI: Setting latency timer of device 0000:24:00.0 to 64 [ 161.356747] e1000: 0000:24:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:36:c3:52 [ 161.424413] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 161.424719] ACPI: PCI Interrupt 0000:24:00.1[B] -> GSI 18 (level, low) -> IRQ 18 [ 161.424800] PCI: Setting latency timer of device 0000:24:00.1 to 64 [ 161.501078] e1000: 0000:24:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:36:c3:53 [ 161.572021] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 161.572071] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 161.572081] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 161.616936] e1000: 0000:07:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:36:c3:d6 [ 161.691704] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection [ 161.691753] ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 161.691763] PCI: Setting latency timer of device 0000:07:00.1 to 64 [ 161.736553] e1000: 0000:07:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:36:c3:d7 [ 161.803551] e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection [ 161.872292] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 161.931536] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 20 (level, low) -> IRQ 20 [ 161.969413] USB Universal Host Controller Interface driver v3.0 [ 161.972156] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 161.972167] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 161.972170] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 161.975780] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 161.975817] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002200 [ 161.989453] usb usb1: configuration #1 chosen from 1 choice [ 161.994019] hub 1-0:1.0: USB hub found [ 161.994076] hub 1-0:1.0: 2 ports detected [ 162.097378] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 [ 162.097389] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 162.097393] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 162.102555] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 162.102591] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00002600 [ 162.111146] usb usb2: configuration #1 chosen from 1 choice [ 162.118061] hub 2-0:1.0: USB hub found [ 162.118079] hub 2-0:1.0: 2 ports detected [ 162.233876] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 23 [ 162.233890] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 162.233893] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 162.244840] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 162.244872] uhci_hcd 0000:00:1d.2: irq 23, io base 0x00002a00 [ 162.274565] usb usb3: configuration #1 chosen from 1 choice [ 162.276753] hub 3-0:1.0: USB hub found [ 162.276782] hub 3-0:1.0: 2 ports detected [ 162.389204] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 22 [ 162.389217] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 162.389220] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 162.416521] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 162.416552] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00002e00 [ 162.460605] usb usb4: configuration #1 chosen from 1 choice [ 162.465048] hub 4-0:1.0: USB hub found [ 162.465065] hub 4-0:1.0: 2 ports detected [ 162.634675] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 162.735403] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 162.737069] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 162.737075] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 162.765666] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 162.769571] ehci_hcd 0000:00:1d.7: debug port 1 [ 162.769576] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 162.769587] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9000000 [ 162.783831] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 162.785755] usb 3-1: unable to read config index 0 descriptor/start: -71 [ 162.785759] usb 3-1: chopping to 0 config(s) [ 162.790049] usb usb5: configuration #1 chosen from 1 choice [ 162.790902] hub 5-0:1.0: USB hub found [ 162.790916] hub 5-0:1.0: 8 ports detected [ 162.793737] usb 3-1: string descriptor 0 read error: -71 [ 162.801719] usb 3-1: string descriptor 0 read error: -71 [ 162.809693] usb 3-1: string descriptor 0 read error: -71 [ 162.842787] usb 3-1: no configuration chosen from 0 choices [ 162.848120] usb 3-1: USB disconnect, address 2 [ 162.999688] md: Autodetecting RAID arrays. [ 162.999691] md: Scanned 0 and added 0 devices. [ 162.999693] md: autorun ... [ 162.999694] md: ... autorun DONE. [ 164.543852] input: Power Button (FF) as /class/input/input0 [ 164.594983] ACPI: Power Button (FF) [PWRF] [ 164.711399] EXT3 FS on sda3, internal journal [ 164.750481] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 165.038696] kjournald starting. Commit interval 5 seconds [ 165.038925] EXT3 FS on sda1, internal journal [ 165.038960] EXT3-fs: mounted filesystem with ordered data mode. [ 165.292159] Adding 8008392k swap on /dev/sda2. Priority:-1 extents:1 across:8008392k [ 165.568911] IA-32 Microcode Update Driver: v1.14a [ 166.127298] e1000: eth2: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 180.651047] RPC: Registered udp transport module. [ 180.651051] RPC: Registered tcp transport module. [ 180.739846] mount.nfs used greatest stack depth: 3192 bytes left