Message-Id: <11968504052105-git-send-email-chripell@gmail.com>
Date:	Wed,  5 Dec 2007 11:26:45 +0100
From:	chripell@...il.com
To:	linux-kernel@...r.kernel.org
Cc:	Christian Pellegrin <chripell@...e.org>
Subject: [PATCH] max3100 driver

This patch adds support for the MAX3100 SPI UART.

Generated on  20071205  against v2.6.23

Signed-off-by: Christian Pellegrin <chripell@...e.org>
---
 drivers/serial/Kconfig         |    7 +
 drivers/serial/Makefile        |    1 +
 drivers/serial/max3100.c       |  960 ++++++++++++++++++++++++++++++++++++++++
 include/linux/serial_max3100.h |   25 +
 4 files changed, 993 insertions(+), 0 deletions(-)

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 81b52b7..4e7111b 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -461,6 +461,13 @@ config SERIAL_S3C2410_CONSOLE
 	  your boot loader about how to pass options to the kernel at
 	  boot time.)
 
+config SERIAL_MAX3100
+        tristate "MAX3100 support"
+        depends on SPI
+        help
+          MAX3100 chip support
+
+
 config SERIAL_DZ
 	bool "DECstation DZ serial driver"
 	depends on MACH_DECSTATION && 32BIT
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index af6377d..9f67e52 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
 obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
 obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
 obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
+obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
 obj-$(CONFIG_SERIAL_SUNHV) += sunhv.o
 obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c
new file mode 100644
index 0000000..dd48258
--- /dev/null
+++ b/drivers/serial/max3100.c
@@ -0,0 +1,960 @@
+
+/* 
+ *
+ *  Copyright (C) 2007 Christian Pellegrin <chripell@...lware.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * version 0.1  31/5/2006   first public release
+ * version 0.2  11/11/2007  ported to kernel 2.6.23
+ *
+ *
+ *
+ * Notes: the MAX3100 doesn't provide an interrupt on CTS
+ * so we have to use polling for flow control. TX empty
+ * IRQ is unusable, since writing conf clears FIFO buffer.
+ *
+ * Example platform data:
+
+static struct plat_max3100 max3100_plat_data = {
+	.loopback = 0,
+	.crystal = 0,
+	.only_edge_irq = 0,
+};
+
+static struct spi_board_info spi_board_info[] = {
+	{
+		.modalias	= "max3100",
+		.platform_data	= &max3100_plat_data,
+		.irq		= IRQ_EINT12,
+		.max_speed_hz	= 5*1000*1000,
+		.chip_select	= 0,
+	},  
+};
+
+ */
+
+#include <linux/bitops.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/keyboard.h>
+#include <linux/major.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/reboot.h>
+#include <linux/sched.h>
+#include <linux/serial_core.h>
+#include <linux/signal.h>
+#include <linux/spi/spi.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/workqueue.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/semaphore.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+#include <linux/serial_max3100.h>
+
+#define MAX3100_C    (1<<14)
+#define MAX3100_D    (0<<14)
+#define MAX3100_W    (1<<15)
+#define MAX3100_RX   (0<<15)
+
+#define MAX3100_WC   (MAX3100_W | MAX3100_C)
+#define MAX3100_RC   (MAX3100_RX| MAX3100_C)
+#define MAX3100_WD   (MAX3100_W | MAX3100_D)
+#define MAX3100_RD   (MAX3100_RX| MAX3100_D)
+#define MAX3100_CMD  (3 << 14)
+
+#define MAX3100_T    (1<<14)
+#define MAX3100_R    (1<<15)
+
+#define MAX3100_FEN  (1<<13)
+#define MAX3100_SHDN (1<<12)
+#define MAX3100_TM   (1<<11)
+#define MAX3100_RM   (1<<10)
+#define MAX3100_PM   (1<<9)
+#define MAX3100_RAM  (1<<8)
+#define MAX3100_IR   (1<<7)
+#define MAX3100_ST   (1<<6)
+#define MAX3100_PE   (1<<5)
+#define MAX3100_L    (1<<4)
+#define MAX3100_BAUD (0xf)
+
+#define MAX3100_TE   (1<<10)
+#define MAX3100_RAFE (1<<10)
+#define MAX3100_RTS  (1<<9)
+#define MAX3100_CTS  (1<<9)
+#define MAX3100_PT   (1<<8)
+#define MAX3100_DATA (0xff)
+
+#define MAX3100_RT   (MAX3100_R | MAX3100_T)
+#define MAX3100_RTC  (MAX3100_RT | MAX3100_CTS | MAX3100_RAFE)
+
+struct max3100_port_s {
+	struct uart_port port;
+	struct spi_device *spi;
+	struct tty_struct 	*tty;
+  
+	struct semaphore   spi_txrx; /* protects access to the hw */
+
+	int rts;		/* rts status, can be MAX3100_RTS or 0 */
+	int conf;		/* configuration for the MAX31000
+				 * (bits 0-7, bits 8-11 are irqs) */
+	int last_cts_rx;	/* last CTS received for flow ctrl */
+
+	int tx_buf_cur;	        /* current char to tx */
+	int tx_buf_tot;		/* current number of chars in tx buf */
+	unsigned char *tx_buf;
+	spinlock_t tx_buf_lock;	/* shared tx buffer spinlock (no sem
+				 * since write may sleep) */
+
+	int tx_stopped;		/* when we should not send chars */
+	int parity;		/* keeps track if we should work parity */
+#define MAX3100_PARITY_ON 1
+#define MAX3100_PARITY_ODD 2
+#define MAX3100_7BIT 4
+	
+	int irq;		/* irq assigned to the max3100 */
+
+	int minor;		/* minor number */
+	int crystal;		/* 1 if 3.6864Mhz crystal 0 for 1.8432 */
+	int loopback;		/* 1 if we are in loopback mode */
+	int only_edge_irq;	/* 1 if we have only edge irqs (like PXA) */
+	
+	int ref_count;		/* how many users */
+	struct semaphore sem;	/* protects us during open/close */
+
+	struct workqueue_struct *workqueue; 
+        /* for handling irqs: need workqueue since we do spi_sync */
+	struct work_struct work;
+	int  force_end_work;	
+        /* set to 1 to make the worknadler exit as soon as possible */
+
+	int irq_status;
+	spinlock_t irq_lock;
+	/* these are for IRQ on/off counting */
+};
+
+static struct tty_driver *serial_driver = NULL;
+/* global since we do register the driver only once */
+
+#define MAX_MAX3100 4 		/* 4 MAX3100s should be enough for everyone */
+static struct max3100_port_s * max3100s[MAX_MAX3100]; /* the chips */
+
+#define MAX3100_TX_BUF_N 16
+/* our buffer for sendind chars */
+
+#define MAX3100_FLIP_EVERY 8
+/* how many chars we wait befor flipping tty buffer */
+
+static void irq_state(struct max3100_port_s *s, int on) {
+	unsigned long flags;
+
+	spin_lock_irqsave(&s->irq_lock, flags);
+	if (s->irq_status != on) {
+		if (on) {
+			enable_irq(s->irq);
+		}
+		else {
+			disable_irq(s->irq);
+		}
+		s->irq_status = on;
+	}
+	spin_unlock_irqrestore(&s->irq_lock, flags);		
+}
+
+
+static int max3100_do_parity(struct max3100_port_s *s, u16 c)
+{
+	int parity;
+	int i,n;
+
+	if (s->parity & MAX3100_PARITY_ODD)
+		parity = 0;
+	else
+		parity = 1;
+	
+	if (s->parity & MAX3100_7BIT)
+		n = 7;
+	else
+		n = 8;
+
+	for(i=0;i<n;i++) {
+		parity = parity ^ ( (c>>i) & 1);
+	}
+	return parity;
+}
+
+static inline int max3100_check_parity(struct max3100_port_s *s, u16 c)
+{
+	return max3100_do_parity(s, c) == ( (c>>9) & 1);
+}
+
+static inline void max3100_calc_parity(struct max3100_port_s *s, u16 *c)
+{
+	*c &=  ~MAX3100_PT;
+	*c |= max3100_do_parity(s, *c)<<8;
+}
+
+
+static void max3100_work(struct work_struct *w);
+
+static inline void max3100_dowork(struct max3100_port_s *s)
+{
+	if (!s->force_end_work) {
+		PREPARE_WORK(&s->work, max3100_work);
+		queue_work(s->workqueue, &s->work);
+	}
+}
+
+static int max3100_sr(struct max3100_port_s *s, u16 tx, u16 *rx, int push)
+{
+	/* note: we suppose that the T bit fron conf_status is in sync
+	 * with the hw one, so all the communication must go through
+	 * this function */
+	struct spi_message	message;
+	struct spi_transfer	x;
+	int status, flag;
+	u16 etx,erx;
+	int got_char = 0;
+
+	down(&s->spi_txrx);
+
+	if (s->loopback) {
+		if ((tx & MAX3100_CMD) == MAX3100_RC)
+			tx |= 1;
+	}
+	etx = htons(tx);
+	spi_message_init(&message);
+	memset(&x, 0, sizeof(x));
+	x.tx_buf = &etx;
+	x.rx_buf = &erx;
+	x.len = 2;
+	spi_message_add_tail(&x, &message);
+	status = spi_sync(s->spi, &message);
+	if (status) {
+		dev_warn(&s->spi->dev, "error while calling spi_sync\n");
+		return 0;
+	}
+	*rx = ntohs(erx);
+	//printk("%04x - %04x\n", tx, *rx);
+
+	if ((tx & MAX3100_CMD) == MAX3100_RD ||
+	    (tx & MAX3100_CMD) == MAX3100_WD) {
+		s->last_cts_rx = *rx;
+	}
+
+	if (*rx & MAX3100_R && 
+	    ((tx & MAX3100_CMD) == MAX3100_RD ||
+	     (tx & MAX3100_CMD) == MAX3100_WD)) {
+		unsigned int flags;
+			
+		got_char = 1;
+		if (tty_buffer_request_room(s->tty, 1) == 0) {
+			dev_warn(&s->spi->dev, "no room in tty buffer\n");
+			tty_schedule_flip(s->tty);
+		}
+
+		flag = TTY_NORMAL;
+		if (*rx & MAX3100_RAFE) {
+			s->port.icount.frame++;
+			flags = TTY_FRAME;
+		}
+		if (s->parity & MAX3100_PARITY_ON && max3100_check_parity(s, *rx)) {
+			s->port.icount.parity++;
+			flags = TTY_PARITY;
+		}
+		tty_insert_flip_char(s->tty, *rx & MAX3100_DATA, flag);
+	}
+
+	up(&s->spi_txrx);
+
+	if (push && got_char) {
+		tty_schedule_flip(s->tty);
+	}
+	return got_char;
+}
+
+
+static void max3100_send_conf(struct max3100_port_s *s) 
+{
+	u16 tx=0,rx;
+
+	tx = MAX3100_WC | (s->conf & 0x0fff);
+	max3100_sr(s, tx, &rx, 1);
+}
+
+static inline int max3100_ok_to_send(struct max3100_port_s *s) 
+{
+	if (C_CRTSCTS(s->tty)) {
+		if ((s->last_cts_rx & MAX3100_CTS) == 0)
+			return 0;
+	}
+	return ! s->tx_stopped;
+}
+
+static void max3100_work(struct work_struct *w)
+{
+	struct max3100_port_s *s = container_of(w, struct max3100_port_s, work);
+	u16 tx,rx;
+	unsigned long flags;
+	int nchars;		/* number of char waiting in the send buf */
+	int rxchars = 0;	/* chars received */
+
+	do {
+		tx = MAX3100_RD;
+		rxchars += max3100_sr(s, tx, &rx, 0);
+		/* rx a char so we get MAX3100_T and CTS current */
+
+		spin_lock_irqsave(&s->tx_buf_lock, flags);
+		nchars = s->tx_buf_tot - s->tx_buf_cur;
+		tx = MAX3100_WD | s->rts;
+		tx |= s->tx_buf[s->tx_buf_cur];
+		spin_unlock_irqrestore(&s->tx_buf_lock, flags);
+
+		if ((rx & MAX3100_T) &&	/* tx buffer empty*/
+		    max3100_ok_to_send(s) &&  /* fw ctrl decision */
+		    nchars > 0 && /* more to send */
+		    ! s->force_end_work) {
+			if (s->parity & MAX3100_PARITY_ON)
+				max3100_calc_parity(s, &tx);
+			rxchars += max3100_sr(s, tx, &rx, 0);
+			nchars -= 1;
+			spin_lock_irqsave(&s->tx_buf_lock, flags);
+			s->tx_buf_cur += 1;
+			spin_unlock_irqrestore(&s->tx_buf_lock, flags);
+			if (nchars == 0) {
+				tty_wakeup(s->tty);
+			}
+		}		    
+		if (rxchars > MAX3100_FLIP_EVERY) {
+			tty_schedule_flip(s->tty);
+			rxchars = 0;
+		}
+	}
+	while ((nchars > 0 || 	/* more to send */
+		rx & MAX3100_R) && 	/* try to empy all the RX buffer */
+	       ! s->force_end_work);
+	if (rxchars) {
+		tty_schedule_flip(s->tty);
+	}
+	if (! s->only_edge_irq && ! s->force_end_work) 
+		irq_state(s, 1);		
+}
+
+static irqreturn_t max3100_irq(int irqno, void *dev_id)
+{
+	struct max3100_port_s	*s = dev_id;
+	
+	if (! s->only_edge_irq)
+		irq_state(s, 0); /* avoid irq storm */
+	max3100_dowork(s);
+	return IRQ_HANDLED;
+}
+
+static void rs_stop(struct tty_struct *tty)
+{
+	struct max3100_port_s *s = (struct max3100_port_s *) tty->driver_data;
+
+	s->tx_stopped = 1;
+}
+
+static void rs_start(struct tty_struct *tty)
+{
+	struct max3100_port_s *s = (struct max3100_port_s *) tty->driver_data;
+
+	s->tx_stopped = 0;
+}
+
+static void rs_flush_chars(struct tty_struct *tty)
+{
+}
+
+static void rs_waint_until_sent(struct tty_struct *tty, int timeout)
+{
+	struct max3100_port_s *s = (struct max3100_port_s *) tty->driver_data;
+	unsigned long jstop;
+
+	jstop = jiffies + timeout;
+	do {
+		if (s->tx_buf_tot == 0 || s->tx_buf_tot == s->tx_buf_cur)
+			return;
+		schedule();
+	} while (!timeout || time_before(jiffies, jstop));
+}
+
+static void rs_flush_buffer(struct tty_struct *tty)
+{
+	struct max3100_port_s *s = (struct max3100_port_s *) tty->driver_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&s->tx_buf_lock, flags);
+	s->tx_buf_cur = 0;
+	s->tx_buf_tot = 0;
+	spin_unlock_irqrestore(&s->tx_buf_lock, flags);
+}
+
+static int rs_write(struct tty_struct * tty,
+		    const unsigned char *buf, int count)
+{
+	struct max3100_port_s *s = (struct max3100_port_s *) tty->driver_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&s->tx_buf_lock, flags);
+	if (s->tx_buf_cur < s->tx_buf_tot) {
+		count = 0;
+	}
+	else {
+		if (count > MAX3100_TX_BUF_N)
+			count = MAX3100_TX_BUF_N;
+		memcpy(s->tx_buf, buf, count);
+		s->tx_buf_cur = 0;
+		s->tx_buf_tot = count;
+	}
+	spin_unlock_irqrestore(&s->tx_buf_lock, flags);
+	max3100_dowork(s);
+	return count;
+}
+
+static int rs_write_room(struct tty_struct *tty)
+{
+	struct max3100_port_s *s = (struct max3100_port_s *) tty->driver_data;
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&s->tx_buf_lock, flags);
+	if (s->tx_buf_cur < s->tx_buf_tot)
+		ret = 0;
+	else
+		ret = MAX3100_TX_BUF_N;
+	spin_unlock_irqrestore(&s->tx_buf_lock, flags);
+	return ret;
+}
+
+static int rs_chars_in_buffer(struct tty_struct *tty)
+{
+	struct max3100_port_s *s = (struct max3100_port_s *) tty->driver_data;
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&s->tx_buf_lock, flags);
+	if (s->tx_buf_cur < s->tx_buf_tot)
+		ret = MAX3100_TX_BUF_N;
+	else
+		ret = 0;
+	spin_unlock_irqrestore(&s->tx_buf_lock, flags);
+	return ret;
+}
+
+static void internal_throttle(struct tty_struct * tty, char ch, int rts)
+{
+	struct max3100_port_s *s = (struct max3100_port_s *) tty->driver_data;
+	u16 tx=0,rx;
+	int old_tx_stopped;
+
+	old_tx_stopped = s->tx_stopped;
+	s->tx_stopped = 1;
+	tx = MAX3100_RD;
+	do {			/* wait fot tx buf empty */
+		max3100_sr(s, tx, &rx, 1);
+	} while ((rx & MAX3100_T) == 0);
+
+	if (I_IXOFF(tty)) {
+		tx = MAX3100_WD | s->rts | (ch&0xff);
+	}
+	if (C_CRTSCTS(tty)) {
+		s->rts = rts ? (MAX3100_RTS) : 0;
+		tx =  MAX3100_WD | s->rts | MAX3100_TE;
+	}	
+	if (tx) {
+		max3100_sr(s, tx, &rx, 1);
+	}
+	s->tx_stopped = old_tx_stopped;
+}
+
+static void rs_throttle(struct tty_struct * tty)
+{
+	internal_throttle(tty, STOP_CHAR(tty), 0);
+}
+
+static void rs_unthrottle(struct tty_struct * tty)
+{
+	internal_throttle(tty, START_CHAR(tty), 1);
+}
+
+static int get_lsr_info(struct max3100_port_s *s, unsigned int *value)
+{
+	unsigned char status;
+	u16 tx=0,rx;
+
+	tx = MAX3100_RD;
+	max3100_sr(s, tx, &rx, 1);
+	status = (rx & MAX3100_CTS) > 0;
+	put_user(status,value);
+	return 0;
+}
+
+static int rs_ioctl(struct tty_struct *tty, struct file * file,
+		    unsigned int cmd, unsigned long arg)
+{
+	struct max3100_port_s *s = (struct max3100_port_s *) tty->driver_data;
+	int retval = 0;
+
+	switch (cmd) {
+
+	case TIOCSERGETLSR: /* Get line status register */
+		if (access_ok(VERIFY_WRITE, (void *) arg, sizeof(unsigned int)))
+			return get_lsr_info(s, (unsigned int *) arg);
+		return -EFAULT;
+
+	default:
+		retval = -ENOIOCTLCMD ;
+	}
+	return retval;
+}
+
+static void change_speed(struct max3100_port_s *s)
+{
+	unsigned cflag;
+	unsigned i;
+	u32 param_new;
+	u32 param_mask;
+
+	if (!s->tty || !s->tty->termios)
+		return;
+	cflag = s->tty->termios->c_cflag;
+	param_new = param_mask = 0;
+
+	i = cflag & CBAUD;
+	/* note: supposed 3.6864 Mhz xtal */
+	switch(i) {
+	case B300:
+		if (s->crystal) {
+			param_new = 16; 
+		}
+		else {
+			dev_warn(&s->spi->dev, "unsupported baud rate!\n");
+			param_new = 15; 
+		}
+		break;
+	case B600:
+		param_new = 15; 
+		break;
+	case B1200:
+		param_new = 14; 
+		break;
+	case B2400:
+		param_new = 13; 
+		break;
+	case B4800:
+		param_new = 12; 
+		break;
+	case B9600:
+		param_new = 11; 
+		break;
+	case B19200:
+		param_new = 10; 
+		break;
+	case B38400:
+		param_new = 9; 
+		break;
+	case B57600:
+		param_new = 2; 
+		break;
+	case B115200:
+		param_new = 1; 
+		break;
+	case B230400:
+		if (s->crystal) {
+			param_new = 1; 
+			dev_warn(&s->spi->dev, "unsupported baud rate!\n");
+		}
+		else {
+			param_new = 0; 
+		}
+		break;
+	default:
+		param_new = 1; 
+		dev_warn(&s->spi->dev, "invalid baudrate\n");
+	}
+	param_new = (param_new - s->crystal) & MAX3100_BAUD;
+	param_mask |= MAX3100_BAUD;
+	
+	if ((cflag & CSIZE) == CS8) {
+		param_new &= ~MAX3100_L;
+		s->parity &= ~MAX3100_7BIT;
+	}
+	else {
+		param_new |= MAX3100_L;
+		s->parity |= MAX3100_7BIT;
+	}
+	param_mask |= MAX3100_L;
+
+	if (cflag & CSTOPB)
+		param_new |= MAX3100_ST;
+	else
+		param_new &= ~MAX3100_ST;
+	param_mask |= MAX3100_ST;
+
+	if (cflag & PARENB) {
+		param_new |= MAX3100_PE;
+		s->parity |= MAX3100_PARITY_ON;
+	}
+	else {
+		param_new &= ~MAX3100_PE;
+		s->parity &= ~MAX3100_PARITY_ON;
+	}
+	param_mask |= MAX3100_PE;
+
+	if (cflag & PARODD) {
+		s->parity |= MAX3100_PARITY_ODD;
+	}
+	else {
+		s->parity &=~ MAX3100_PARITY_ODD;
+	}
+
+	s->conf = (s->conf & ~param_mask) | (param_new & param_mask);
+	max3100_send_conf(s);
+
+	return;
+}
+
+
+static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+{
+	struct max3100_port_s *s = (struct max3100_port_s *) tty->driver_data;
+
+	if (tty->termios->c_cflag == old_termios->c_cflag)
+		return;
+
+	change_speed(s);
+
+        if ((old_termios->c_cflag & CRTSCTS) &&
+            !(tty->termios->c_cflag & CRTSCTS)) {
+		max3100_dowork(s);
+        }
+}
+
+static void shutdown(struct max3100_port_s *s)
+{
+	s->force_end_work = 1;
+	if (s->workqueue) {
+		flush_workqueue(s->workqueue);	
+		destroy_workqueue(s->workqueue);
+	}
+	if (s->irq) 
+		free_irq(s->irq, s);
+	kfree(s->tx_buf);
+	s->tx_buf = NULL;
+	if (s->tty)
+		set_bit(TTY_IO_ERROR, &s->tty->flags);
+}
+
+static void rs_hangup(struct tty_struct *tty)
+{
+	struct max3100_port_s *s = (struct max3100_port_s *) tty->driver_data;
+	
+	shutdown(s);
+}
+
+static int startup(struct max3100_port_s *s)
+{
+	char b[10];
+	s->tx_buf = kmalloc(MAX3100_TX_BUF_N, GFP_KERNEL);
+	s->tx_buf_cur = 0;
+	s->tx_buf_tot = 0;
+
+	s->force_end_work = 0;
+	s->parity = 0;
+	s->rts = 0;
+	s->tx_stopped = 0;
+	s->conf = MAX3100_RM;
+
+	sprintf(b, "max3100-%d", s->minor);
+	s->workqueue = create_singlethread_workqueue(b);
+	if (!s->workqueue) {
+		dev_warn(&s->spi->dev, "cannot create workqueue\n");
+		return -EBUSY;
+	}
+	INIT_WORK(&s->work, max3100_work);
+
+	s->irq_status = 1;	/* IRQS are on after request */
+	if (request_irq(s->irq, max3100_irq, 0, "max3100", s) < 0) {
+		dev_warn(&s->spi->dev, "cannot allocate irq %d\n", s->irq);
+		s->irq = 0;
+		return -EBUSY;
+	}
+	if (s->only_edge_irq)
+		set_irq_type(s->irq, IRQT_FALLING);
+	else
+		set_irq_type(s->irq, IRQT_LOW);
+
+	if (s->tty)
+		clear_bit(TTY_IO_ERROR, &s->tty->flags);
+
+	change_speed(s);
+
+	if (s->loopback) {
+		u16 tx,rx;
+		tx = 0x4001;
+		max3100_sr(s, tx, &rx, 1);
+	}
+
+	return 0;
+}
+
+int rs_open(struct tty_struct *tty, struct file * filp)
+{
+	struct max3100_port_s *s;
+	int 			retval=0, line;
+
+	line = tty->index;
+	
+	if (line >= MAX_MAX3100 || line < 0)
+		return -ENODEV;
+
+	s = max3100s[line];
+
+	if (!s) {
+		printk("inexistent max3100 for index %d\n", line);
+		return -ENODEV;
+	}
+
+	down(&s->sem);
+
+	s->ref_count++;
+	
+	if (s->ref_count == 1) {
+		tty->driver_data = s;
+		s->tty = tty;
+
+		retval = startup(s);
+	}
+
+	up(&s->sem);
+
+	return retval;
+}
+
+static void rs_close(struct tty_struct *tty, struct file * filp)
+{
+	struct max3100_port_s *s = (struct max3100_port_s *) tty->driver_data;
+
+	down(&s->sem);
+
+	s->ref_count--;
+	if (s->ref_count == 0) {
+		rs_waint_until_sent(tty, 5*HZ);
+		shutdown(s);
+	}
+
+	up(&s->sem);
+}
+
+static int rs_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct max3100_port_s *s = (struct max3100_port_s *) tty->driver_data;
+	u16 tx,rx;
+	unsigned int result = 0;
+
+	tx =  MAX3100_RD;
+	max3100_sr(s, tx, &rx, 1);
+
+	result =  ((s->rts) ? TIOCM_RTS : 0)
+		| ((rx  & MAX3100_CTS) ? TIOCM_CTS : 0);
+	return result;
+}
+
+static int rs_tiocmset(struct tty_struct *tty, struct file *file,
+			   unsigned int set, unsigned int clear)
+{
+	struct max3100_port_s *s = (struct max3100_port_s *) tty->driver_data;
+	int old_rts = s->rts;
+	u16 tx,rx;
+
+	if (set & TIOCM_RTS)
+		s->rts = MAX3100_RTS;
+	if (clear & TIOCM_RTS)
+		s->rts = 0;
+
+	if (s->rts != old_rts) {
+		tx =  MAX3100_WD | s->rts | MAX3100_TE;
+		max3100_sr(s, tx, &rx, 1);
+	}
+	return 0;
+}
+
+struct tty_operations rs_ops = {
+	.open = rs_open,
+	.close = rs_close,
+	.write = rs_write,
+	.flush_chars = rs_flush_chars,
+	.wait_until_sent = rs_waint_until_sent,
+	.write_room = rs_write_room,
+	.chars_in_buffer = rs_chars_in_buffer,
+	.flush_buffer = rs_flush_buffer,
+	.ioctl = rs_ioctl,
+	.throttle = rs_throttle,
+	.unthrottle = rs_unthrottle,
+	.set_termios = rs_set_termios,
+	.stop = rs_stop,
+	.start = rs_start,
+	.hangup = rs_hangup,
+	.tiocmget = rs_tiocmget,
+	.tiocmset = rs_tiocmset,
+};
+
+static int __devinit max3100_probe(struct spi_device *spi)
+{
+	int i;
+	struct plat_max3100 *pdata;
+
+	if (!serial_driver) {
+		serial_driver = alloc_tty_driver(MAX_MAX3100);
+		if (!serial_driver) {
+			printk("Cannot allocate serial driver\n");
+			return -ENOMEM;
+		}
+
+		serial_driver->name = "ttyMAX";
+		serial_driver->driver_name = "ttyMAX";
+		serial_driver->major = TTY_MAJOR;
+		serial_driver->minor_start = 128; /* this should prevent clashes */
+		serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+		serial_driver->subtype = SERIAL_TYPE_NORMAL;
+		serial_driver->init_termios = tty_std_termios;
+		serial_driver->init_termios.c_cflag = 
+			B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+		serial_driver->flags = TTY_DRIVER_REAL_RAW |TTY_DRIVER_DYNAMIC_DEV;
+		tty_set_operations(serial_driver, &rs_ops);
+
+		if (tty_register_driver(serial_driver)) {
+			put_tty_driver(serial_driver);
+			printk("Couldn't register serial driver\n");
+			return -EINVAL;
+		}
+	}
+
+	for(i=0; i<MAX_MAX3100; i++) 
+		if (!max3100s[i])
+			break;
+	if (i == MAX_MAX3100) {
+		dev_warn(&spi->dev, "too many MAX3100 chips\n");
+		return -ENOMEM;
+	}
+
+	max3100s[i] = kmalloc(sizeof(struct max3100_port_s), GFP_KERNEL);
+	if (!max3100s[i]) {
+		dev_warn(&spi->dev, "kmalloc for max3100 structure %d failed!\n", i);
+		return -ENOMEM;
+	}
+	memset(max3100s[i], 0, sizeof(struct max3100_port_s));
+	max3100s[i]->spi = spi;
+	max3100s[i]->irq = spi->irq;
+	init_MUTEX(&max3100s[i]->sem);
+	init_MUTEX(&max3100s[i]->spi_txrx);
+	spin_lock_init(&max3100s[i]->tx_buf_lock);
+	spin_lock_init(&max3100s[i]->irq_lock);
+	dev_set_drvdata(&spi->dev, &max3100s[i]);
+	pdata = spi->dev.platform_data;
+	max3100s[i]->crystal = pdata->crystal;
+	max3100s[i]->loopback = pdata->loopback;
+	max3100s[i]->only_edge_irq = pdata->only_edge_irq;
+	max3100s[i]->minor = i;
+	tty_register_device(serial_driver, i, &spi->dev);
+
+	return 0;
+}
+
+static int __devexit max3100_remove(struct spi_device *spi)
+{
+	int i;
+
+	i = 0;
+
+	for(i=0; i<MAX_MAX3100; i++) 
+		if (max3100s[i] && max3100s[i]->ref_count > 0)
+			return -EBUSY;
+
+	for(i=0; i<MAX_MAX3100; i++) 
+		if (max3100s[i]) {
+			tty_unregister_device(serial_driver, i);
+			kfree(max3100s[i]);
+			max3100s[i] = NULL;
+		}
+
+	if (serial_driver)
+		tty_unregister_driver(serial_driver);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int max3100_suspend(struct spi_device *spi, pm_message_t state)
+{
+	struct max3100_port_s *s = (struct max3100_port_s *) dev_get_drvdata(&spi->dev);
+	u16 tx,rx;
+
+	tx = MAX3100_WC | MAX3100_SHDN;
+	max3100_sr(s, tx, &rx, 0);
+	return 0;
+}
+
+static int max3100_resume(struct spi_device *spi) {
+	struct max3100_port_s *s = (struct max3100_port_s *) dev_get_drvdata(&spi->dev);
+
+	max3100_send_conf(s);
+
+	return 0;
+}
+
+#else
+#define max3100_suspend NULL
+#define max3100_resume  NULL
+#endif
+
+static struct spi_driver max3100_driver = {
+	.driver = {
+		.name		= "max3100",
+		.bus		= &spi_bus_type,
+		.owner		= THIS_MODULE,
+	},
+
+	.probe		= max3100_probe,
+	.remove		= __devexit_p(max3100_remove),
+	.suspend	= max3100_suspend,
+	.resume		= max3100_resume,	
+};
+
+
+static int __init max3100_init(void)
+{
+	return spi_register_driver(&max3100_driver);
+}
+module_init(max3100_init);
+
+static void __exit max3100_exit(void)
+{
+	spi_unregister_driver(&max3100_driver);
+}
+module_exit(max3100_exit);
+
+MODULE_DESCRIPTION("MAX3100 driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/serial_max3100.h b/include/linux/serial_max3100.h
new file mode 100644
index 0000000..eefac54
--- /dev/null
+++ b/include/linux/serial_max3100.h
@@ -0,0 +1,25 @@
+
+/* 
+ *
+ *  Copyright (C) 2007 Christian Pellegrin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+
+#ifndef _LINUX_SERIAL_MAX3100_H
+#define _LINUX_SERIAL_MAX3100_H 1
+
+struct plat_max3100 {
+	int loopback;
+/* force MAX3100 in loopback */
+	int crystal;
+/* 0 for 3.6864 Mhz, 1 for 1.8432  */
+	int only_edge_irq;
+/* for archs like PXA with only edge irqs */
+};
+
+#endif
--
1.4.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists