Initializing cgroup subsys cpuset Linux version 2.6.24-rc4 (kmaraas@localhost) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-35)) #1 SMP Wed Dec 5 12:18:44 CET 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf7d0000 (usable) BIOS-e820: 00000000bf7d0000 - 00000000bf7e5600 (reserved) BIOS-e820: 00000000bf7e5600 - 00000000bf7f8000 (ACPI NVS) BIOS-e820: 00000000bf7f8000 - 00000000bf800000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 2167MB HIGHMEM available. 896MB LOWMEM available. Entering add_active_range(0, 0, 784336) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 784336 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 784336 On node 0 totalpages: 784336 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4040 pages, LIFO batch:0 Normal zone: 3080 pages used for memmap Normal zone: 222200 pages, LIFO batch:31 HighMem zone: 7587 pages used for memmap HighMem zone: 547373 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.4 present. Using APIC driver default ACPI: RSDP 000F78B0, 0024 (r2 HP ) ACPI: XSDT BF7E57C8, 007C (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: FACP BF7E5684, 00F4 (r4 HP 30AD 3 HP 1) ACPI: DSDT BF7E5ACC, FE7B (r1 HP nc6400 10000 MSFT 100000E) ACPI: FACS BF7F7E80, 0040 ACPI: SLIC BF7E5844, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1) ACPI: HPET BF7E59BC, 0038 (r1 HP 30AD 1 HP 1) ACPI: APIC BF7E59F4, 0068 (r1 HP 30AD 1 HP 1) ACPI: MCFG BF7E5A5C, 003C (r1 HP 30AD 1 HP 1) ACPI: TCPA BF7E5A98, 0032 (r2 HP 30AD 1 HP 1) ACPI: SSDT BF7F5947, 0059 (r1 HP HPQNLP 1 MSFT 100000E) ACPI: SSDT BF7F59A0, 032D (r1 HP HPQSAT 1 MSFT 100000E) ACPI: SSDT BF7F64E0, 025F (r1 HP Cpu0Tst 3000 INTL 20060317) ACPI: SSDT BF7F673F, 00A6 (r1 HP Cpu1Tst 3000 INTL 20060317) ACPI: SSDT BF7F67E5, 04D7 (r1 HP CpuPm 3000 INTL 20060317) ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c0000000 (gap: bf800000:3f400000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 773613 Kernel command line: ro root=LABEL=/1 rhgb quiet pci=assign-busses selinux=off mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0820000 soft=c0800000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1828.795 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 1024 kB per task-struct memory footprint: 1680 bytes Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3082056k/3137344k available (2305k kernel code, 53948k reserved, 1181k data, 576k init, 2219840k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc076d000 - 0xc07fd000 ( 576 kB) .data : 0xc06404b5 - 0xc0767924 (1181 kB) .text : 0xc0400000 - 0xc06404b5 (2305 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 3662.13 BogoMIPS (lpj=1831065) Security Framework initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. lockdep: not fixing up alternatives. ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 lockdep: not fixing up alternatives. Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c0821000 soft=c0801000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3657.53 BogoMIPS (lpj=1828769) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06 Total of 2 processors activated (7319.66 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 00000003 groups: 00000001 00000002 CPU1 attaching sched-domain: domain 0: span 00000003 groups: 00000002 00000001 khelper used greatest stack depth: 3120 bytes left net_namespace: 80 bytes HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. Booting paravirtualized kernel on bare hardware Time: 16:26:56 Date: 12/05/07 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32 PCI: Using configuration type 1 Setting up standard PCI resources khelper used greatest stack depth: 3036 bytes left ACPI: EC: Look up EC in DSDT ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [C002] (0000:00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1100-113f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C101._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C111._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C117._PRT] ACPI: PCI Interrupt Link [C10D] (IRQs *10 11) ACPI: PCI Interrupt Link [C10E] (IRQs *10 11) ACPI: PCI Interrupt Link [C10F] (IRQs 10 *11) ACPI: PCI Interrupt Link [C110] (IRQs 10 11) *5 ACPI: PCI Interrupt Link [C123] (IRQs *10 11) ACPI: PCI Interrupt Link [C124] (IRQs *10 11) ACPI: PCI Interrupt Link [C125] (IRQs 10 *11) ACPI Exception (pci_link-0184): AE_NOT_FOUND, Evaluating _PRS [20070126] ACPI: Power Resource [C1EF] (on) ACPI: Power Resource [C1F6] (on) ACPI: Power Resource [C220] (on) ACPI: Power Resource [C228] (on) ACPI: Power Resource [C32D] (off) ACPI: Power Resource [C32E] (off) ACPI: Power Resource [C32F] (off) ACPI: Power Resource [C330] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0xbf7fffff could not be reserved system 00:0c: ioport range 0x500-0x55f has been reserved system 00:0c: ioport range 0x800-0x80f has been reserved system 00:0c: iomem range 0xffb00000-0xffbfffff could not be reserved system 00:0c: iomem range 0xfff00000-0xffffffff could not be reserved system 00:0e: ioport range 0x4d0-0x4d1 has been reserved system 00:0e: ioport range 0x1000-0x107f has been reserved system 00:0e: ioport range 0x1100-0x113f has been reserved system 00:0e: ioport range 0x1200-0x121f has been reserved system 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved system 00:0e: iomem range 0xfec00000-0xfec000ff could not be reserved system 00:0e: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:0e: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:0e: iomem range 0xfed90000-0xfed9afff could not be reserved system 00:0f: iomem range 0xfeda0000-0xfedbffff could not be reserved system 00:0f: iomem range 0xfee00000-0xfee00fff could not be reserved PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: f4100000-f41fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: f4000000-f40fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: 2000-3fff MEM window: f0000000-f3ffffff PREFETCH window: disabled. PCI: Bus 5, cardbus bridge: 0000:04:06.0 IO window: 00001400-000014ff IO window: 00001800-000018ff PREFETCH window: c0000000-c3ffffff MEM window: c4000000-c7ffffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: f4200000-f45fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 18 (level, low) -> IRQ 19 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2404k freed khelper used greatest stack depth: 2976 bytes left apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1196872016.880:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [C331] (off) ACPI: Fan [C332] (off) ACPI: Fan [C333] (off) ACPI: Fan [C334] (off) ACPI: SSDT BF7F5D95, 01FB (r1 HP Cpu0Ist 3000 INTL 20060317) ACPI: SSDT BF7F6015, 04CB (r1 HP Cpu0Cst 3001 INTL 20060317) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT BF7F5CCD, 00C8 (r1 HP Cpu1Ist 3000 INTL 20060317) ACPI: SSDT BF7F5F90, 0085 (r1 HP Cpu1Cst 3000 INTL 20060317) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [TZ0] (32 C) ACPI: Thermal Zone [TZ1] (35 C) ACPI: Thermal Zone [TZ2] (26 C) ACPI: Thermal Zone [TZ3] (29 C) ACPI: Thermal Zone [TZ4] (72 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 khelper used greatest stack depth: 2788 bytes left agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xe0000000 khelper used greatest stack depth: 2772 bytes left Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS2 at I/O 0x3e8 (irq = 7) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 Yenta: CardBus bridge found at 0000:04:06.0 [103c:30ad] Yenta: Enabling burst memory read transactions Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:04:06.0, mfunc 0x01aa1b22, devctl 0x64 Yenta: ISA IRQ mask 0x0cf8, PCI irq 19 Socket status: 30000006 pcmcia: parent PCI bridge Memory window: 0xf4200000 - 0xf45fffff PNP: PS/2 Controller [PNP0303:C21D,PNP0f13:C21E] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor ladder Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input2 khelper used greatest stack depth: 2700 bytes left cpuidle: using governor menu Marking TSC unstable due to: TSC halts in idle. usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Time: hpet clocksource has been installed. TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 3:483:438 Freeing unused kernel memory: 576k freed Write protecting the kernel read-only data: 915k ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4784000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected insmod used greatest stack depth: 1924 bytes left ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004040 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 19, io base 0x00004060 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004080 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 21 (level, low) -> IRQ 22 ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x1) don't match, using nr_ports ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf usb 2-1: new full speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xf4785000 port 0xf4785100 irq 220 ata2: SATA max UDMA/133 abar m1024@0xf4785000 port 0xf4785180 irq 220 ata3: SATA max UDMA/133 abar m1024@0xf4785000 port 0xf4785200 irq 220 ata4: SATA max UDMA/133 abar m1024@0xf4785000 port 0xf4785280 irq 220 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 succeeded ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04) ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1: failed to recover some devices, retrying in 5 secs input: PS/2 Generic Mouse as /class/input/input3 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 succeeded ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04) ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded ata1.00: ACPI: failed the second time, disabled ata1.00: revalidation failed (errno=1) ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 0) ata3: SATA link down (SStatus 0 SControl 0) ata4: SATA link down (SStatus 0 SControl 0) scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 892C PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk insmod used greatest stack depth: 548 bytes left kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. sd 0:0:0:0: Attached scsi generic sg0 type 0 cs: IO port probe 0x100-0x3af: excluding 0x100-0x107 0x378-0x37f cs: IO port probe 0x3e0-0x4ff: clean. cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. input: Video Bus as /class/input/input4 ACPI: Video Device [C085] (multi-head: yes rom: no post: no) tg3.c:v3.86 (November 9, 2007) ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 eth0: Tigon3 [partno(BCM95751M) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d4:a5:6d:f1 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) intel_rng: FWH not detected rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k ACPI: AC Adapter [C1B2] (off-line) input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input6 ACPI: Sleep Button (CM) [C249] input: Lid Switch as /class/input/input7 input: PC Speaker as /class/input/input8 ACPI: Lid Switch [C241] ACPI: PCI Interrupt 0000:04:06.2[A] -> GSI 18 (level, low) -> IRQ 19 ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40a0 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40a8 irq 15 ACPI: Battery Slot [C1B4] (battery present) ACPI: Battery Slot [C1B3] (battery absent) ata5.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4247N, 1.01, max MWDMA2 parport_pc 00:03: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 0 [PCSPP,TRISTATE] IRQ handler type mismatch for IRQ 0 current handler: timer Pid: 1073, comm: modprobe Not tainted 2.6.24-rc4 #1 [] show_trace_log_lvl+0x1a/0x2f [] show_trace+0x12/0x14 [] dump_stack+0x6c/0x72 [] setup_irq+0x196/0x1ae [] request_irq+0xf4/0x112 [] parport_pc_probe_port+0x73d/0x8bc [parport_pc] [] parport_pc_pnp_probe+0xda/0xf5 [parport_pc] [] pnp_device_probe+0x66/0x87 [] driver_probe_device+0xe9/0x16a [] __driver_attach+0x76/0xaf [] bus_for_each_dev+0x3a/0x5f [] driver_attach+0x19/0x1b [] bus_add_driver+0x73/0x1aa [] driver_register+0x67/0x6c [] pnp_register_driver+0x17/0x19 [] parport_pc_init+0x268/0x320 [parport_pc] [] sys_init_module+0x1430/0x155c [] sysenter_past_esp+0x6b/0xc1 ======================= parport0: irq 0 in use, resorting to polled operation ata5.00: configured for MWDMA2 ata6: port disabled. ignoring. scsi 4:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4247N 1.01 PQ: 0 ANSI: 5 scsi 4:0:0:0: Attached scsi generic sg1 type 5 tpm_inf_pnp 00:04: Found C205 with ID IFX0102 tpm_inf_pnp 00:04: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci: SDHCI controller found at 0000:04:06.3 [104c:803c] (rev 0) ACPI: PCI Interrupt 0000:04:06.3[C] -> GSI 22 (level, low) -> IRQ 21 mmc0: SDHCI at 0xf4202000 irq 21 PIO Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb NET: Registered protocol family 23 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1b.0 to 64 found SMC SuperIO Chip (devid=0x7a rev=01 base=0x004e): LPC47N227 smsc_superio_flat(): fir: 0x100, sir: 0x3e8, dma: 03, irq: 7, mode: 0x0e smsc_ircc_present: can't get sir_base of 0x3e8 NET: Registered protocol family 10 lo: Disabled Privacy Extensions Clocksource tsc unstable (delta = -177067209 ns) device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1839432k swap on /dev/sda4. Priority:-1 extents:1 across:1839432k IA-32 Microcode Update Driver: v1.14a ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) audit(1196868469.122:2): audit_pid=1685 old=0 by auid=4294967295 Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 ADDRCONF(NETDEV_UP): eth0: link is not ready [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized i915 1.6.0 20060119 on minor 0 UDF-fs: Partition marked readonly; forcing readonly mount UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'LOTRBFME2', timestamp 2006/02/04 11:03 (103c) CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 00000003 groups: 00000001 00000002 domain 1: span 00000003 groups: 00000003 CPU1 attaching sched-domain: domain 0: span 00000003 groups: 00000002 00000001 domain 1: span 00000003 groups: 00000003