| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20071217112551H.fujita.tomonori@lab.ntt.co.jp> Date: Mon, 17 Dec 2007 11:25:51 +0900 From: FUJITA Tomonori <fujita.tomonori@....ntt.co.jp> To: john@...ffel.org Cc: linux-kernel@...r.kernel.org, linux-scsi@...r.kernel.org Subject: Re: 2.6.24-rc5: tape drive not responding On Sun, 16 Dec 2007 20:05:51 -0500 "John Stoffel" <john@...ffel.org> wrote: > [ 215.007701] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > [ 215.008145] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > [ 215.008678] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > [ 215.009122] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > [ 215.009598] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > [ 215.010042] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > [ 215.010516] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > [ 215.010959] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > [ 215.011403] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > [ 215.011850] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > . > . > . > [ 232.954629] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > [ 233.035902] scsi 3:0:3:0: DEVICE RESET operation started > [ 233.099514] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > . > . > . > > These repeat for about 15 seconds or so. They're really annoying and > I'd love to see some sort of rate limiting put in here. The messages > and end with: > . > . > . > [ 238.084175] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > [ 238.165887] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > [ 238.247157] scsi 3:0:3:0: DEVICE RESET operation timed-out. > [ 238.313892] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > [ 238.395192] scsi 3:0:3:0: BUS RESET operation started > [ 238.455690] sym1: SCSI parity error detected: SCR1=1 DBC=11000028 SBCL=ae > [ 238.539216] sym1: SCSI BUS reset detected. > [ 238.592552] sym1: SCSI BUS has been reset. > [ 238.641576] scsi 3:0:3:0: BUS RESET operation complete. > [ 248.700373] target3:0:3: wide asynchronous > [ 248.752026] target3:0:3: Wide Transfers Fail > [ 248.805220] target3:0:3: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15) > [ 248.886729] target3:0:3: Domain Validation skipping write tests > [ 248.958666] target3:0:3: Ending Domain Validation > [ 252.264086] scsi 3:0:0:0: Attached scsi generic sg2 type 8 > [ 252.331257] st 3:0:2:0: Attached scsi tape st0 > [ 252.384549] st 3:0:2:0: st0: try direct i/o: yes (alignment 512 B) > [ 252.458875] st 3:0:2:0: Attached scsi generic sg3 type 1 > [ 252.523963] st 3:0:3:0: Attached scsi tape st1 > [ 252.577184] st 3:0:3:0: st1: try direct i/o: yes (alignment 512 B) > [ 252.651484] st 3:0:3:0: Attached scsi generic sg4 type 1 > > > I've also got an ATL P1000 SCSI tape library hooked up to this same > controller and port, and I can manipulate it properly using the 'mtx' > program pointed to the /dev/changer alias, which points to the correct > /dev/sg# device. > > Here's my /proc/scsi/scsi output, as you can see, I've got a bunch of > devices on this system: > > # cat /proc/scsi/scsi > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: COMPAQ Model: HC01841729 Rev: 3208 > Type: Direct-Access ANSI SCSI revision: 02 > Host: scsi0 Channel: 00 Id: 01 Lun: 00 > Vendor: COMPAQ Model: BD018222CA Rev: B016 > Type: Direct-Access ANSI SCSI revision: 02 > Host: scsi3 Channel: 00 Id: 00 Lun: 00 > Vendor: ATL Model: P1000 6220051 Rev: 1.20 > Type: Medium Changer ANSI SCSI revision: 02 > Host: scsi3 Channel: 00 Id: 02 Lun: 00 > Vendor: QUANTUM Model: DLT7000 Rev: 2565 > Type: Sequential-Access ANSI SCSI revision: 02 > Host: scsi3 Channel: 00 Id: 03 Lun: 00 > Vendor: QUANTUM Model: DLT7000 Rev: 2565 > Type: Sequential-Access ANSI SCSI revision: 02 > Host: scsi4 Channel: 00 Id: 00 Lun: 00 > Vendor: SAMSUNG Model: CDRW/DVD SM-352B Rev: T806 > Type: CD-ROM ANSI SCSI revision: 05 > Host: scsi6 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: ST3320620AS Rev: 3.AA > Type: Direct-Access ANSI SCSI revision: 05 > Host: scsi7 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: WDC WD3200AAKS-0 Rev: 12.0 > Type: Direct-Access ANSI SCSI revision: 05 > Host: scsi10 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: WDC WD1200JB-00C Rev: 17.0 > Type: Direct-Access ANSI SCSI revision: 05 > Host: scsi11 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: WDC WD1200JB-00E Rev: 15.0 > Type: Direct-Access ANSI SCSI revision: 05 > Host: scsi12 Channel: 00 Id: 00 Lun: 00 > Vendor: Generic Model: STORAGE DEVICE Rev: 0001 > Type: Direct-Access ANSI SCSI revision: 00 > Host: scsi12 Channel: 00 Id: 00 Lun: 01 > Vendor: Generic Model: STORAGE DEVICE Rev: 0001 > Type: Direct-Access ANSI SCSI revision: 00 > Host: scsi12 Channel: 00 Id: 00 Lun: 02 > Vendor: Generic Model: STORAGE DEVICE Rev: 0001 > Type: Direct-Access ANSI SCSI revision: 00 > Host: scsi12 Channel: 00 Id: 00 Lun: 03 > Vendor: Generic Model: STORAGE DEVICE Rev: 0001 > Type: Direct-Access ANSI SCSI revision: 00 > > > When I try to access my tape devices, I get the following: > > # mt -f /dev/st0 status > /dev/st0: Device or resource busy > > But lsof doesn't show any other processes accessing this device, and > I've stopped my backup software since it keeps hanging on tape device > access. > > Here's the output of dmesg where I get the OOPS: > > [ 273.382057] sd 12:0:0:3: Attached scsi generic sg13 type 0 > [ 276.244872] ------------[ cut here ]------------ > [ 276.300215] kernel BUG at include/linux/scatterlist.h:59! > [ 276.364873] invalid opcode: 0000 [#1] SMP > [ 276.414346] Modules linked in: > [ 276.451148] > [ 276.469036] Pid: 1824, comm: stinit Not tainted (2.6.24-rc5 #2) > [ 276.539940] EIP: 0060:[<c0343c30>] EFLAGS: 00010213 CPU: 0 > [ 276.605651] EIP is at st_do_scsi+0x2e0/0x340 > [ 276.656788] EAX: 00000000 EBX: 00000000 ECX: c16ef780 EDX: f7c4f050 > [ 276.731847] ESI: f7c4f7d0 EDI: 00001000 EBP: f7c4f000 ESP: f712bdf8 > [ 276.806904] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 > [ 276.871568] Process stinit (pid: 1824, ti=f712b000 task=f750a030 task.ti=f712b000) > [ 276.960139] Stack: 00000003 f7c4f050 00000000 00000000 00d59f80 00000000 f776fe20 c03468a0 > [ 277.062012] 000000d0 f712be9c f7d2a000 f776fe20 f7d2a018 00000000 00000006 f712be9c > [ 277.163890] f7d2a000 f712beac f7c4f000 c0345790 00000006 00000002 000dbba0 00000000 > [ 277.265771] Call Trace: > [ 277.297383] [<c03468a0>] st_sleep_done+0x0/0x70 > [ 277.352894] [<c0345790>] check_tape+0x510/0x640 > [ 277.408414] [<c0346cfb>] st_open+0x18b/0x220 > [ 277.460803] [<c01707e0>] exact_match+0x0/0x10 > [ 277.514237] [<c0346b70>] st_open+0x0/0x220 > [ 277.564553] [<c0170ebf>] chrdev_open+0x9f/0x190 > [ 277.620069] [<c0170e20>] chrdev_open+0x0/0x190 > [ 277.674543] [<c016c86f>] __dentry_open+0xaf/0x1b0 > [ 277.732136] [<c016ca25>] nameidata_to_filp+0x35/0x40 > [ 277.792847] [<c016ca7b>] do_filp_open+0x4b/0x60 > [ 277.848364] [<c016c732>] get_unused_fd_flags+0x52/0xd0 > [ 277.911153] [<c016cadc>] do_sys_open+0x4c/0xe0 > [ 277.965629] [<c016cbac>] sys_open+0x1c/0x20 I think that you need the following patch for the scatterlist problem: http://marc.info/?l=linux-scsi&m=119770154127770&w=2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists