[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a8e1da0712191643p74a88c35u45681b11b0492474@mail.gmail.com>
Date: Thu, 20 Dec 2007 08:43:28 +0800
From: "Dave Young" <hidave.darkstar@...il.com>
To: "Alan Stern" <stern@...land.harvard.edu>
Cc: "Andrew Morton" <akpm@...ux-foundation.org>,
linux-kernel@...r.kernel.org, mdharm-usb@...-eyed-alien.net,
gregkh@...e.de, linux-usb@...r.kernel.org,
usb-storage@...ts.one-eyed-alien.net
Subject: Re: 2.6.24-rc5-mm1
On Dec 20, 2007 12:07 AM, Alan Stern <stern@...land.harvard.edu> wrote:
>
> On Wed, 19 Dec 2007, Dave Young wrote:
>
> > I tested on another machine with kernel 2.6.24-rc2. And the result is
> > diffrent again.
> > Here is the result:
> >
> > 1. on 2.6.24-rc2, when I plugin the player the kernel reports below messages:
> >
> > usb-storage: waiting for device to settle before scanning
> > /*[lets mark the below part as part 1]*/
> > scsi 0:0:0:0: Direct-Access Newman mp3 PQ: 0 ANSI: 0 CCS
> > sd 0:0:0:0: [sda] 245248 512-byte hardware sectors (126 MB)
> > sd 0:0:0:0: [sda] Write Protect is on
> > sd 0:0:0:0: [sda] Mode Sense: 03 00 80 00
> > sd 0:0:0:0: [sda] Assuming drive cache: write through
> > sd 0:0:0:0: [sda] 245248 512-byte hardware sectors (126 MB)
> > sd 0:0:0:0: [sda] Write Protect is on
> > sd 0:0:0:0: [sda] Mode Sense: 03 00 80 00
> > sd 0:0:0:0: [sda] Assuming drive cache: write through
> > sda: sda1
> > /*[lets mark the below part as part 2]*/
> > sd 0:0:0:0: [sda] Attached SCSI removable disk
> > usb-storage: device scan complete
> > sd 0:0:0:0: [sda] 245248 512-byte hardware sectors (126 MB)
> > sd 0:0:0:0: [sda] Write Protect is off
> > sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
> > sd 0:0:0:0: [sda] Assuming drive cache: write through
> > sd 0:0:0:0: [sda] 245248 512-byte hardware sectors (126 MB)
> > sd 0:0:0:0: [sda] Write Protect is off
> > sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
> > sd 0:0:0:0: [sda] Assuming drive cache: write through
> > sda: sda1
>
> This is not normal. When you plug in a storage device you should get
> all of the messages in your part 1 plus the first two lines in your
> part 2, but not the rest of part 2.
>
> > 2. on 2.6.24-rc5 kernel reports only the part 1, after try mount the
> > disk it reports the part 2 and mount the partition as rw
> >
> > 3. on 2.6.24-rc5 kernel reports only the part 1, after try mount the
> > disk it just mount the partition as ro with nothing more messages.
>
> You must have a typo there. Those can't both be true for 2.6.24-rc5.
> In fact you shouldn't see part 2 at all.
>
> Here's what I get when I plug in a USB mass-storage device under
> 2.6.24-rc5:
>
> [ 87.903014] usb-storage: device found at 2
> [ 87.909570] scsi 0:0:0:0: Direct-Access Memorex TD 2B 1.09 PQ: 0 ANSI: 0 CCS
> [ 87.913144] usb-storage: device scan complete
> [ 88.804031] sd 0:0:0:0: [sda] 243712 512-byte hardware sectors (125 MB)
> [ 88.805507] sd 0:0:0:0: [sda] Write Protect is off
> [ 88.805577] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
> [ 88.805639] sd 0:0:0:0: [sda] Assuming drive cache: write through
> [ 88.809526] sd 0:0:0:0: [sda] 243712 512-byte hardware sectors (125 MB)
> [ 88.810421] sd 0:0:0:0: [sda] Write Protect is off
> [ 88.810488] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
> [ 88.810575] sd 0:0:0:0: [sda] Assuming drive cache: write through
> [ 88.810641] sda: sda1
> [ 88.812450] sd 0:0:0:0: [sda] Attached SCSI removable disk
> [ 89.041014] sd 0:0:0:0: Attached scsi generic sg0 type 0
>
> Mounting the disk produces no extra output at all. I get the same
> result under 2.6.23 and earlier operating systems. You should see
> approximately the same thing.
Hi, Alan
I'm sure about my post. I'm not so famillar with usb.
It looks weird. Seems that my device will be firstly recoganized as a
mp3 player and then a usb storage, so the system will report part 1 &
part 2 under previous kernels.
Regards
dave
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists