| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 20 Dec 2007 14:48:45 +0000
From: "Will Newton" <will.newton@...il.com>
To: linux-kernel@...r.kernel.org
Cc: linux-serial@...r.kernel.org
Subject: [PATCH] Support specifying DW APB UARTSs in device platform_data
This patch allows the private_data field to be specified in
platform_data for the standard 8250/16550 UART. This field is used by
DW APB type UARTs and without this patch it's only possible to set
this field when registering the port by hand. If private_data is not
set then the
driver will potentially oops with a NULL pointer dereference.
Signed-off-by: Will Newton <will.newton@...il.com>
---
drivers/serial/8250.c | 40 +++++++++++++++++++++-------------------
include/linux/serial_8250.h | 1 +
2 files changed, 22 insertions(+), 19 deletions(-)
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index f94109c..c93ef20 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2662,16 +2662,17 @@ static int __devinit serial8250_probe(struct
platform_device *dev)
memset(&port, 0, sizeof(struct uart_port));
for (i = 0; p && p->flags != 0; p++, i++) {
- port.iobase = p->iobase;
- port.membase = p->membase;
- port.irq = p->irq;
- port.uartclk = p->uartclk;
- port.regshift = p->regshift;
- port.iotype = p->iotype;
- port.flags = p->flags;
- port.mapbase = p->mapbase;
- port.hub6 = p->hub6;
- port.dev = &dev->dev;
+ port.iobase = p->iobase;
+ port.membase = p->membase;
+ port.irq = p->irq;
+ port.uartclk = p->uartclk;
+ port.regshift = p->regshift;
+ port.iotype = p->iotype;
+ port.flags = p->flags;
+ port.mapbase = p->mapbase;
+ port.hub6 = p->hub6;
+ port.private_data = p->private_data;
+ port.dev = &dev->dev;
if (share_irqs)
port.flags |= UPF_SHARE_IRQ;
ret = serial8250_register_port(&port);
@@ -2812,15 +2813,16 @@ int serial8250_register_port(struct uart_port *port)
if (uart) {
uart_remove_one_port(&serial8250_reg, &uart->port);
- uart->port.iobase = port->iobase;
- uart->port.membase = port->membase;
- uart->port.irq = port->irq;
- uart->port.uartclk = port->uartclk;
- uart->port.fifosize = port->fifosize;
- uart->port.regshift = port->regshift;
- uart->port.iotype = port->iotype;
- uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
- uart->port.mapbase = port->mapbase;
+ uart->port.iobase = port->iobase;
+ uart->port.membase = port->membase;
+ uart->port.irq = port->irq;
+ uart->port.uartclk = port->uartclk;
+ uart->port.fifosize = port->fifosize;
+ uart->port.regshift = port->regshift;
+ uart->port.iotype = port->iotype;
+ uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
+ uart->port.mapbase = port->mapbase;
+ uart->port.private_data = port->private_data;
if (port->dev)
uart->port.dev = port->dev;
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index afe0f6d..00b65c0 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -23,6 +23,7 @@ struct plat_serial8250_port {
resource_size_t mapbase; /* resource base */
unsigned int irq; /* interrupt number */
unsigned int uartclk; /* UART clock rate */
+ void *private_data;
unsigned char regshift; /* register shift */
unsigned char iotype; /* UPIO_* */
unsigned char hub6;
--
1.5.3.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists