| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20071220101829.44ca59da@zod.rchland.ibm.com>
Date: Thu, 20 Dec 2007 10:18:29 -0600
From: Josh Boyer <jwboyer@...ux.vnet.ibm.com>
To: linux-kernel@...r.kernel.org
Cc: paulus@...ba.org
Subject: [RFC] [PATCH 2/3] Rework arch specific Makefiles to use mkimage
Rework the architecture specific Makefiles to use the in-kernel version
of the mkimage tool.
Signed-off-by: Josh Boyer <jwboyer@...ux.vnet.ibm.com>
---
arch/arm/boot/Makefile | 4 ++--
arch/avr32/boot/images/Makefile | 4 ++--
arch/blackfin/boot/Makefile | 4 ++--
arch/powerpc/boot/Makefile | 8 ++++++--
arch/powerpc/boot/wrapper | 2 +-
arch/ppc/boot/images/Makefile | 4 ++--
arch/sh/boot/Makefile | 4 ++--
7 files changed, 17 insertions(+), 13 deletions(-)
--- linux-2.6.orig/arch/arm/boot/Makefile
+++ linux-2.6/arch/arm/boot/Makefile
@@ -11,7 +11,7 @@
# Copyright (C) 1995-2002 Russell King
#
-MKIMAGE := $(srctree)/scripts/mkuboot.sh
+MKIMAGE := $(srctree)/scripts/mkimage/mkimage
ifneq ($(MACHINE),)
include $(srctree)/$(MACHINE)/Makefile.boot
@@ -60,7 +60,7 @@ $(obj)/zImage: $(obj)/compressed/vmlinux
endif
quiet_cmd_uimage = UIMAGE $@
- cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T
kernel \
+ cmd_uimage = $(MKIMAGE) -A arm -O linux -T kernel \
-C none -a $(ZRELADDR) -e $(ZRELADDR) \
-n 'Linux-$(KERNELRELEASE)' -d $< $@
--- linux-2.6.orig/arch/avr32/boot/images/Makefile
+++ linux-2.6/arch/avr32/boot/images/Makefile
@@ -6,7 +6,7 @@
# for more details.
#
-MKIMAGE := $(srctree)/scripts/mkuboot.sh
+MKIMAGE := $(srctree)/scripts/mkimage/mkimage
extra-y := vmlinux.bin vmlinux.gz
@@ -18,7 +18,7 @@ $(obj)/vmlinux.gz: $(obj)/vmlinux.bin FO
$(call if_changed,gzip)
quiet_cmd_uimage = UIMAGE $@
- cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A avr32 -O linux -T
kernel \
+ cmd_uimage = $(MKIMAGE) -A avr32 -O linux -T kernel \
-C gzip -a $(CONFIG_LOAD_ADDRESS) -e
$(CONFIG_ENTRY_ADDRESS) \ -n 'Linux-$(KERNELRELEASE)' -d $< $@
--- linux-2.6.orig/arch/blackfin/boot/Makefile
+++ linux-2.6/arch/blackfin/boot/Makefile
@@ -6,13 +6,13 @@
# for more details.
#
-MKIMAGE := $(srctree)/scripts/mkuboot.sh
+MKIMAGE := $(srctree)/scripts/mkimage/mkimage
targets := vmImage
extra-y += vmlinux.bin vmlinux.gz
quiet_cmd_uimage = UIMAGE $@
- cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T
kernel \
+ cmd_uimage = $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
-C gzip -n 'Linux-$(KERNELRELEASE)' -a
$(CONFIG_BOOT_LOAD) \ -e $(shell $(NM) vmlinux | awk '$$NF ==
"__start" {print $$1}') \ -d $< $@
--- linux-2.6.orig/arch/ppc/boot/images/Makefile
+++ linux-2.6/arch/ppc/boot/images/Makefile
@@ -2,7 +2,7 @@
# This dir holds all of the images for PPC machines.
# Tom Rini January 2001
-MKIMAGE := $(srctree)/scripts/mkuboot.sh
+MKIMAGE := $(srctree)/scripts/mkimage/mkimage
extra-y := vmlinux.bin vmlinux.gz
@@ -19,7 +19,7 @@ $(obj)/vmlinux.gz: $(obj)/vmlinux.bin FO
$(call if_changed,mygzip)
quiet_cmd_uimage = UIMAGE $@
- cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T
kernel \
+ cmd_uimage = $(MKIMAGE) -A ppc -O linux -T kernel \
-C gzip -a 00000000 -e 00000000 -n
'Linux-$(KERNELRELEASE)' \ -d $< $@
--- linux-2.6.orig/arch/sh/boot/Makefile
+++ linux-2.6/arch/sh/boot/Makefile
@@ -8,7 +8,7 @@
# Copyright (C) 1999 Stuart Menefy
#
-MKIMAGE := $(srctree)/scripts/mkuboot.sh
+MKIMAGE := $(srctree)/scripts/mkimage/mkimage
#
# Assign safe dummy values if these variables are not defined,
@@ -38,7 +38,7 @@ KERNEL_LOAD := $(shell /bin/bash -c 'pri
$(CONFIG_ZERO_PAGE_OFFSET)+0x1000]')
quiet_cmd_uimage = UIMAGE $@
- cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel
\
+ cmd_uimage = $(MKIMAGE) -A sh -O linux -T kernel \
-C none -a $(KERNEL_LOAD) -e $(KERNEL_LOAD) \
-n 'Linux-$(KERNELRELEASE)' -d $< $@
--- linux-2.6.orig/arch/powerpc/boot/wrapper
+++ linux-2.6/arch/powerpc/boot/wrapper
@@ -259,7 +259,7 @@ coff)
;;
cuboot*)
gzip -f -9 "$ofile"
- mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
+ $objbin/mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e
"$entry" \ $uboot_version -d "$ofile".gz "$ofile"
;;
treeboot*)
--- linux-2.6.orig/arch/powerpc/boot/Makefile
+++ linux-2.6/arch/powerpc/boot/Makefile
@@ -123,7 +123,7 @@ extra-y := $(obj)/wrapper.a
$(obj-plat) $(obj)/zImage.lds $(obj)/zImage.coff.lds
$(obj)/zImage.ps3.lds
wrapper :=$(srctree)/$(src)/wrapper
-wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff
mktree) \ +wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote
hack-coff mktree mkimage) \ $(wrapper) FORCE
#############
@@ -197,6 +197,7 @@ dts = $(if $(shell echo $(CONFIG_DEVICE_
endif
endif
+
# Don't put the ramdisk on the pattern rule; when its missing make
will try # the pattern rule with less dependencies that also matches
(even with the # hard dependency listed).
@@ -246,9 +247,12 @@ $(obj)/zImage.initrd: $(addprefix $(obj)
install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux
System.map "$(INSTALL_PATH)" $<
+$(obj)/mkimage:
+ ln -s $(srctree)/scripts/mkimage/mkimage $(obj)/mkimage
+
# anything not in $(targets)
clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.*
treeImage.* \
- otheros.bld
+ otheros.bld mkimage
# clean up files cached by wrapper
clean-kernel := vmlinux.strip vmlinux.bin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists