Form a single percpu.h from percpu_32.h and percpu_64.h. Both are now pretty small so this is simply adding them together. Cc: Rusty Russell Cc: tglx@linutronix.de Cc: mingo@redhat.com Signed-off-by: Christoph Lameter Signed-off-by: Mike Travis --- include/asm-x86/percpu.h | 145 ++++++++++++++++++++++++++++++++++++++++++-- include/asm-x86/percpu_32.h | 119 ------------------------------------ include/asm-x86/percpu_64.h | 20 ------ 3 files changed, 141 insertions(+), 143 deletions(-) --- a/include/asm-x86/percpu.h +++ b/include/asm-x86/percpu.h @@ -1,5 +1,142 @@ -#ifdef CONFIG_X86_32 -# include "percpu_32.h" -#else -# include "percpu_64.h" +#ifndef _ASM_X86_PERCPU_H_ +#define _ASM_X86_PERCPU_H_ + +#ifdef CONFIG_X86_64 +#include + +/* Same as asm-generic/percpu.h, except that we store the per cpu offset + in the PDA. Longer term the PDA and every per cpu variable + should be just put into a single section and referenced directly + from %gs */ + +#ifdef CONFIG_SMP +#include + +#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset) +#define __my_cpu_offset read_pda(data_offset) + +#define per_cpu_offset(x) (__per_cpu_offset(x)) + #endif +#include + +DECLARE_PER_CPU(struct x8664_pda, pda); + +#else /* CONFIG_X86_64 */ + +#ifdef __ASSEMBLY__ + +/* + * PER_CPU finds an address of a per-cpu variable. + * + * Args: + * var - variable name + * reg - 32bit register + * + * The resulting address is stored in the "reg" argument. + * + * Example: + * PER_CPU(cpu_gdt_descr, %ebx) + */ +#ifdef CONFIG_SMP +#define PER_CPU(var, reg) \ + movl %fs:per_cpu__##this_cpu_off, reg; \ + lea per_cpu__##var(reg), reg +#define PER_CPU_VAR(var) %fs:per_cpu__##var +#else /* ! SMP */ +#define PER_CPU(var, reg) \ + movl $per_cpu__##var, reg +#define PER_CPU_VAR(var) per_cpu__##var +#endif /* SMP */ + +#else /* ...!ASSEMBLY */ + +/* + * PER_CPU finds an address of a per-cpu variable. + * + * Args: + * var - variable name + * cpu - 32bit register containing the current CPU number + * + * The resulting address is stored in the "cpu" argument. + * + * Example: + * PER_CPU(cpu_gdt_descr, %ebx) + */ +#ifdef CONFIG_SMP + +#define __my_cpu_offset x86_read_percpu(this_cpu_off) + +/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */ +#define __percpu_seg "%%fs:" + +#else /* !SMP */ + +#define __percpu_seg "" + +#endif /* SMP */ + +#include + +/* We can use this directly for local CPU (faster). */ +DECLARE_PER_CPU(unsigned long, this_cpu_off); + +/* For arch-specific code, we can use direct single-insn ops (they + * don't give an lvalue though). */ +extern void __bad_percpu_size(void); + +#define percpu_to_op(op,var,val) \ + do { \ + typedef typeof(var) T__; \ + if (0) { T__ tmp__; tmp__ = (val); } \ + switch (sizeof(var)) { \ + case 1: \ + asm(op "b %1,"__percpu_seg"%0" \ + : "+m" (var) \ + :"ri" ((T__)val)); \ + break; \ + case 2: \ + asm(op "w %1,"__percpu_seg"%0" \ + : "+m" (var) \ + :"ri" ((T__)val)); \ + break; \ + case 4: \ + asm(op "l %1,"__percpu_seg"%0" \ + : "+m" (var) \ + :"ri" ((T__)val)); \ + break; \ + default: __bad_percpu_size(); \ + } \ + } while (0) + +#define percpu_from_op(op,var) \ + ({ \ + typeof(var) ret__; \ + switch (sizeof(var)) { \ + case 1: \ + asm(op "b "__percpu_seg"%1,%0" \ + : "=r" (ret__) \ + : "m" (var)); \ + break; \ + case 2: \ + asm(op "w "__percpu_seg"%1,%0" \ + : "=r" (ret__) \ + : "m" (var)); \ + break; \ + case 4: \ + asm(op "l "__percpu_seg"%1,%0" \ + : "=r" (ret__) \ + : "m" (var)); \ + break; \ + default: __bad_percpu_size(); \ + } \ + ret__; }) + +#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var) +#define x86_write_percpu(var,val) percpu_to_op("mov", per_cpu__##var, val) +#define x86_add_percpu(var,val) percpu_to_op("add", per_cpu__##var, val) +#define x86_sub_percpu(var,val) percpu_to_op("sub", per_cpu__##var, val) +#define x86_or_percpu(var,val) percpu_to_op("or", per_cpu__##var, val) +#endif /* !__ASSEMBLY__ */ +#endif /* !CONFIG_X86_64 */ +#endif /* _ASM_X86_PERCPU_H_ */ --- a/include/asm-x86/percpu_32.h +++ /dev/null @@ -1,119 +0,0 @@ -#ifndef __ARCH_I386_PERCPU__ -#define __ARCH_I386_PERCPU__ - -#ifdef __ASSEMBLY__ - -/* - * PER_CPU finds an address of a per-cpu variable. - * - * Args: - * var - variable name - * reg - 32bit register - * - * The resulting address is stored in the "reg" argument. - * - * Example: - * PER_CPU(cpu_gdt_descr, %ebx) - */ -#ifdef CONFIG_SMP -#define PER_CPU(var, reg) \ - movl %fs:per_cpu__##this_cpu_off, reg; \ - lea per_cpu__##var(reg), reg -#define PER_CPU_VAR(var) %fs:per_cpu__##var -#else /* ! SMP */ -#define PER_CPU(var, reg) \ - movl $per_cpu__##var, reg -#define PER_CPU_VAR(var) per_cpu__##var -#endif /* SMP */ - -#else /* ...!ASSEMBLY */ - -/* - * PER_CPU finds an address of a per-cpu variable. - * - * Args: - * var - variable name - * cpu - 32bit register containing the current CPU number - * - * The resulting address is stored in the "cpu" argument. - * - * Example: - * PER_CPU(cpu_gdt_descr, %ebx) - */ -#ifdef CONFIG_SMP - -#define __my_cpu_offset x86_read_percpu(this_cpu_off) - -/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */ -#define __percpu_seg "%%fs:" - -#else /* !SMP */ - -#define __percpu_seg "" - -#endif /* SMP */ - -#include - -/* We can use this directly for local CPU (faster). */ -DECLARE_PER_CPU(unsigned long, this_cpu_off); - -/* For arch-specific code, we can use direct single-insn ops (they - * don't give an lvalue though). */ -extern void __bad_percpu_size(void); - -#define percpu_to_op(op,var,val) \ - do { \ - typedef typeof(var) T__; \ - if (0) { T__ tmp__; tmp__ = (val); } \ - switch (sizeof(var)) { \ - case 1: \ - asm(op "b %1,"__percpu_seg"%0" \ - : "+m" (var) \ - :"ri" ((T__)val)); \ - break; \ - case 2: \ - asm(op "w %1,"__percpu_seg"%0" \ - : "+m" (var) \ - :"ri" ((T__)val)); \ - break; \ - case 4: \ - asm(op "l %1,"__percpu_seg"%0" \ - : "+m" (var) \ - :"ri" ((T__)val)); \ - break; \ - default: __bad_percpu_size(); \ - } \ - } while (0) - -#define percpu_from_op(op,var) \ - ({ \ - typeof(var) ret__; \ - switch (sizeof(var)) { \ - case 1: \ - asm(op "b "__percpu_seg"%1,%0" \ - : "=r" (ret__) \ - : "m" (var)); \ - break; \ - case 2: \ - asm(op "w "__percpu_seg"%1,%0" \ - : "=r" (ret__) \ - : "m" (var)); \ - break; \ - case 4: \ - asm(op "l "__percpu_seg"%1,%0" \ - : "=r" (ret__) \ - : "m" (var)); \ - break; \ - default: __bad_percpu_size(); \ - } \ - ret__; }) - -#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var) -#define x86_write_percpu(var,val) percpu_to_op("mov", per_cpu__##var, val) -#define x86_add_percpu(var,val) percpu_to_op("add", per_cpu__##var, val) -#define x86_sub_percpu(var,val) percpu_to_op("sub", per_cpu__##var, val) -#define x86_or_percpu(var,val) percpu_to_op("or", per_cpu__##var, val) -#endif /* !__ASSEMBLY__ */ - -#endif /* __ARCH_I386_PERCPU__ */ --- a/include/asm-x86/percpu_64.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASM_X8664_PERCPU_H_ -#define _ASM_X8664_PERCPU_H_ -#include - -/* Same as asm-generic/percpu.h, except that we store the per cpu offset - in the PDA. Longer term the PDA and every per cpu variable - should be just put into a single section and referenced directly - from %gs */ - -#ifdef CONFIG_SMP -#include - -#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset) -#define __my_cpu_offset read_pda(data_offset) - -#define per_cpu_offset(x) (__per_cpu_offset(x)) - -#endif -#include -#endif /* _ASM_X8664_PERCPU_H_ */ -- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/