| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20071228212341.GA6939@uranus.ravnborg.org>
Date: Fri, 28 Dec 2007 22:23:41 +0100
From: Sam Ravnborg <sam@...nborg.org>
To: Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>,
"H. Peter Anvin" <hpa@...or.com>
Cc: Andi Kleen <ak@...e.de>, LKML <linux-kernel@...r.kernel.org>
Subject: [PATCH] x86: unify x86 Makefile(s)
Unify the 32 and 64 bit specific Makefiles.
The unification was simplest to do in one step although the
readability of the patch suffers a bit from this.
Noteworthy remarks on the unification:
- The 64 bit cpu stuff should be moved to Makefile_32.cpu
but I did not feel confident doing it due to subtle differences
- The use of cflags-y were abandoned since we have seen one bug where
we did wrong due to missing assignment to KBUILD_CFLAGS
- The "No need to remake" line are deleted. It caused "make -B" to fail
- For 64 bit the sub architecture stuff is not used but structure
is kept to make it easy to introduce.
- The way head64.o is specified could be nicer - but it awaits the
introduction of head32.o (which seems like a win to introduce for readability)
- -funit-at-a-time should be easy to unify but it looks like we have a bug
in 32 bit. We only enable -funit-at-a-time for gcc less than 0400 if they
support it (and I recall it is a gcc 4.00 feature). [-lt -> -gt]
Introduced by 9ab34fe76114b9538bfcaf3a9d112dee0feb5f17 "enable unit-at-a-time
optimisations for gcc4"
- Patch is checkpatch clean
Patch is tested by doing a defconfig build for i386 and x86_64 and in both
cases monitoring that only relevant files were recompiled when applying
the patch.
Signed-off-by: Sam Ravnborg <sam@...nborg.org>
---
Additional unifications are possible I think apart from the cpu stuff.
But I do not know enough about the gcc options to judge what happens
if we introduce the currently 64 bit specific options in the 32 bit build.
(-m64 is obviously not a candidate).
Sam
arch/x86/Makefile | 243 +++++++++++++++++++++++++++++++++++++++++++++++++-
arch/x86/Makefile_32 | 181 -------------------------------------
arch/x86/Makefile_64 | 141 -----------------------------
3 files changed, 239 insertions(+), 326 deletions(-)
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 7aa1dc6..b0ab9e7 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -7,13 +7,248 @@ else
KBUILD_DEFCONFIG := $(ARCH)_defconfig
endif
-# No need to remake these files
-$(srctree)/arch/x86/Makefile%: ;
+# BITS is used as extension for files which are available in a 32 bit
+# and a 64 bit version to simplify shared Makefiles.
+# e.g.: obj-y += foo_$(BITS).o
+export BITS
ifeq ($(CONFIG_X86_32),y)
+ BITS := 32
UTS_MACHINE := i386
- include $(srctree)/arch/x86/Makefile_32
+
+ HAS_BIARCH := $(call cc-option-yn, -m32)
+ ifeq ($(HAS_BIARCH),y)
+ AS := $(AS) --32
+ LD := $(LD) -m elf_i386
+ CC := $(CC) -m32
+ endif
+
+ ifdef CONFIG_RELOCATABLE
+ LDFLAGS_vmlinux := --emit-relocs
+ endif
+ CHECKFLAGS += -D__i386__
+ KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
else
+ BITS := 64
UTS_MACHINE := x86_64
- include $(srctree)/arch/x86/Makefile_64
+ CHECKFLAGS += -D__x86_64__ -m64
endif
+
+LDFLAGS := -m elf_$(UTS_MACHINE)
+OBJCOPYFLAGS := -O binary -R .note -R .comment -S
+KBUILD_CFLAGS += -pipe
+
+
+ifeq ($(CONFIG_X86_32),y)
+ # prevent gcc from keeping the stack 16 byte aligned
+ KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
+
+ # Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
+ # a lot more stack due to the lack of sharing of stacklots:
+ KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \
+ echo $(call cc-option,-fno-unit-at-a-time); fi ;)
+
+ # CPU-specific tuning. Anything which can be shared with UML should go here.
+ include $(srctree)/arch/x86/Makefile_32.cpu
+ KBUILD_CFLAGS += $(cflags-y)
+
+ # temporary until string.h is fixed
+ KBUILD_CFLAGS += -ffreestanding
+
+else
+ KBUILD_AFLAGS += -m64
+ KBUILD_CFLAGS += -m64
+ # FIXME - should be integrated in Makefile.cpu
+ cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
+ cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
+ # gcc doesn't support -march=core2 yet as of gcc 4.3, but I hope it
+ # will eventually. Use -mtune=generic as fallback
+ cflags-$(CONFIG_MCORE2) += \
+ $(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
+ cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
+ KBUILD_CFLAGS += $(cflags-y)
+
+ KBUILD_CFLAGS += -mno-red-zone
+ KBUILD_CFLAGS += -mcmodel=kernel
+
+ KBUILD_CFLAGS += -Wno-sign-compare
+ KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
+ ifneq ($(CONFIG_DEBUG_INFO),y)
+ # -fweb shrinks the kernel a bit, but the difference is very small
+ # it also messes up debugging, so don't use it for now.
+ #KBUILD_CFLAGS += $(call cc-option,-fweb)
+ endif
+ # -funit-at-a-time shrinks the kernel .text considerably
+ # unfortunately it makes reading oopses harder.
+ KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
+
+ # prevent gcc from generating any FP code by mistake
+ KBUILD_CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
+ # this works around some issues with generating unwind tables in older gccs
+ # newer gccs do it by default
+ KBUILD_CFLAGS += -maccumulate-outgoing-args
+
+ stackp := $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh
+ stackp-$(CONFIG_CC_STACKPROTECTOR) := $(shell $(stackp) \
+ "$(CC)" -fstack-protector )
+ stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(stackp) \
+ "$(CC)" -fstack-protector-all )
+
+ KBUILD_CFLAGS += $(stackp-y)
+endif
+
+
+
+# Stackpointer is addressed different for 32 bit and 64 bit x86
+sp-$(CONFIG_X86_32) := esp
+sp-$(CONFIG_X86_64) := rsp
+
+# do binutils support CFI?
+cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1)
+# is .cfi_signal_frame supported too?
+cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1)
+KBUILD_AFLAGS += $(cfi) $(cfi-sigframe)
+KBUILD_CFLAGS += $(cfi) $(cfi-sigframe)
+
+
+###
+# Sub architecture support
+
+# Default subarch .c files
+mcore-y := arch/x86/mach-default
+
+# Voyager subarch support
+mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-x86/mach-voyager
+mcore-$(CONFIG_X86_VOYAGER) := arch/x86/mach-voyager
+
+# VISWS subarch support
+mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-x86/mach-visws
+mcore-$(CONFIG_X86_VISWS) := arch/x86/mach-visws
+
+# NUMAQ subarch support
+mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-x86/mach-numaq
+mcore-$(CONFIG_X86_NUMAQ) := arch/x86/mach-default
+
+# BIGSMP subarch support
+mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-x86/mach-bigsmp
+mcore-$(CONFIG_X86_BIGSMP) := arch/x86/mach-default
+
+# RDC R-321x subarch support
+mflags-$(CONFIG_X86_RDC321X) := -Iinclude/asm-x86/mach-rdc321x
+mcore-$(CONFIG_X86_RDC321X) := arch/x86/mach-default
+core-$(CONFIG_X86_RDC321X) += arch/x86/mach-rdc321x/
+
+#Summit subarch support
+mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-x86/mach-summit
+mcore-$(CONFIG_X86_SUMMIT) := arch/x86/mach-default
+
+# generic subarchitecture
+mflags-$(CONFIG_X86_GENERICARCH) := -Iinclude/asm-x86/mach-generic
+mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default
+core-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/
+
+# ES7000 subarch support
+mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-x86/mach-es7000
+mcore-$(CONFIG_X86_ES7000) := arch/x86/mach-default
+core-$(CONFIG_X86_ES7000) := arch/x86/mach-es7000/
+
+# default subarch .h files
+mflags-y += -Iinclude/asm-x86/mach-default
+
+# 64 bit does not use subarch support - clear relevant variables
+core-$(CONFIG_X86_64) :=
+mcore-$(CONFIG_X86_64) :=
+mflags-$(CONFIG_X86_64) :=
+
+KBUILD_CFLAGS += $(mflags-y)
+KBUILD_AFLAGS += $(mflags-y)
+
+
+###
+# Kernel objects
+
+head-y := arch/x86/kernel/head_$(BITS).o
+head-$(CONFIG_X86_64) += arch/x86/kernel/head64.o
+head-y += arch/x86/kernel/init_task.o
+
+libs-y += arch/x86/lib/
+
+# Xen paravirtualization support
+core-$(CONFIG_XEN) += arch/x86/xen/
+
+# lguest paravirtualization support
+core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/
+
+core-y += arch/x86/kernel/
+core-y += arch/x86/mm/
+core-y += $(mcore-y)/
+core-y += arch/x86/crypto/
+core-y += arch/x86/vdso/
+core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/
+
+# drivers-y are linked after core-y
+drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
+drivers-$(CONFIG_PCI) += arch/x86/pci/
+
+# must be linked after kernel/
+drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
+
+ifeq ($(CONFIG_X86_32),y)
+drivers-$(CONFIG_PM) += arch/x86/power/
+drivers-$(CONFIG_FB) += arch/x86/video/
+endif
+
+boot := arch/x86/boot
+
+PHONY += zImage bzImage compressed zlilo bzlilo \
+ zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install
+
+# Default kernel to build
+all: bzImage
+
+# KBUILD_IMAGE specify target image being built
+ KBUILD_IMAGE := $(boot)/bzImage
+zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage
+
+zImage bzImage: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
+ $(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot
+ $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/bzImage
+
+compressed: zImage
+
+zlilo bzlilo: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zlilo
+
+zdisk bzdisk: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk
+
+fdimage fdimage144 fdimage288 isoimage: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
+
+install: vdso_install
+ $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
+
+PHONY += vdso_install
+vdso_install:
+ $(Q)$(MAKE) $(build)=arch/x86/vdso $@
+
+archclean:
+ $(Q)rm -rf $(objtree)/arch/i386
+ $(Q)rm -rf $(objtree)/arch/x86_64
+ $(Q)$(MAKE) $(clean)=$(boot)
+
+define archhelp
+ echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
+ echo ' install - Install kernel using'
+ echo ' (your) ~/bin/installkernel or'
+ echo ' (distribution) /sbin/installkernel or'
+ echo ' install to $$(INSTALL_PATH) and run lilo'
+ echo ' bzdisk - Create a boot floppy in /dev/fd0'
+ echo ' fdimage - Create a boot floppy image'
+ echo ' isoimage - Create a boot CD-ROM image'
+endef
+
+CLEAN_FILES += arch/x86/boot/fdimage \
+ arch/x86/boot/image.iso \
+ arch/x86/boot/mtools.conf
diff --git a/arch/x86/Makefile_32 b/arch/x86/Makefile_32
deleted file mode 100644
index 293eda3..0000000
--- a/arch/x86/Makefile_32
+++ /dev/null
@@ -1,181 +0,0 @@
-#
-# i386 Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" cleaning up for this architecture.
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-#
-# 19990713 Artur Skawina <skawina@...cities.com>
-# Added '-march' and '-mpreferred-stack-boundary' support
-#
-# 20050320 Kianusch Sayah Karadji <kianusch@...tech.net>
-# Added support for GEODE CPU
-
-# BITS is used as extension for files which are available in a 32 bit
-# and a 64 bit version to simplify shared Makefiles.
-# e.g.: obj-y += foo_$(BITS).o
-BITS := 32
-export BITS
-
-HAS_BIARCH := $(call cc-option-yn, -m32)
-ifeq ($(HAS_BIARCH),y)
-AS := $(AS) --32
-LD := $(LD) -m elf_i386
-CC := $(CC) -m32
-endif
-
-LDFLAGS := -m elf_i386
-OBJCOPYFLAGS := -O binary -R .note -R .comment -S
-ifdef CONFIG_RELOCATABLE
-LDFLAGS_vmlinux := --emit-relocs
-endif
-CHECKFLAGS += -D__i386__
-
-KBUILD_CFLAGS += -pipe -msoft-float -mregparm=3 -freg-struct-return
-
-# prevent gcc from keeping the stack 16 byte aligned
-KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
-
-# CPU-specific tuning. Anything which can be shared with UML should go here.
-include $(srctree)/arch/x86/Makefile_32.cpu
-
-# temporary until string.h is fixed
-cflags-y += -ffreestanding
-
-# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
-# a lot more stack due to the lack of sharing of stacklots:
-KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;)
-
-# do binutils support CFI?
-cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
-KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
-
-# is .cfi_signal_frame supported too?
-cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
-KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
-
-KBUILD_CFLAGS += $(cflags-y)
-
-# Default subarch .c files
-mcore-y := arch/x86/mach-default
-
-# Voyager subarch support
-mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-x86/mach-voyager
-mcore-$(CONFIG_X86_VOYAGER) := arch/x86/mach-voyager
-
-# VISWS subarch support
-mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-x86/mach-visws
-mcore-$(CONFIG_X86_VISWS) := arch/x86/mach-visws
-
-# NUMAQ subarch support
-mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-x86/mach-numaq
-mcore-$(CONFIG_X86_NUMAQ) := arch/x86/mach-default
-
-# BIGSMP subarch support
-mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-x86/mach-bigsmp
-mcore-$(CONFIG_X86_BIGSMP) := arch/x86/mach-default
-
-# RDC R-321x subarch support
-mflags-$(CONFIG_X86_RDC321X) := -Iinclude/asm-x86/mach-rdc321x
-mcore-$(CONFIG_X86_RDC321X) := arch/x86/mach-default
-core-$(CONFIG_X86_RDC321X) += arch/x86/mach-rdc321x/
-
-#Summit subarch support
-mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-x86/mach-summit
-mcore-$(CONFIG_X86_SUMMIT) := arch/x86/mach-default
-
-# generic subarchitecture
-mflags-$(CONFIG_X86_GENERICARCH) := -Iinclude/asm-x86/mach-generic
-mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default
-core-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/
-
-# ES7000 subarch support
-mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-x86/mach-es7000
-mcore-$(CONFIG_X86_ES7000) := arch/x86/mach-default
-core-$(CONFIG_X86_ES7000) := arch/x86/mach-es7000/
-
-# Xen paravirtualization support
-core-$(CONFIG_XEN) += arch/x86/xen/
-
-# lguest paravirtualization support
-core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/
-
-# default subarch .h files
-mflags-y += -Iinclude/asm-x86/mach-default
-
-head-y := arch/x86/kernel/head_32.o arch/x86/kernel/init_task.o
-
-libs-y += arch/x86/lib/
-core-y += arch/x86/kernel/ \
- arch/x86/mm/ \
- $(mcore-y)/ \
- arch/x86/crypto/ \
- arch/x86/vdso/
-drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
-drivers-$(CONFIG_PCI) += arch/x86/pci/
-# must be linked after kernel/
-drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
-drivers-$(CONFIG_PM) += arch/x86/power/
-drivers-$(CONFIG_FB) += arch/x86/video/
-
-KBUILD_CFLAGS += $(mflags-y)
-KBUILD_AFLAGS += $(mflags-y)
-
-boot := arch/x86/boot
-
-PHONY += zImage bzImage compressed zlilo bzlilo \
- zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install
-
-all: bzImage
-
-# KBUILD_IMAGE specify target image being built
- KBUILD_IMAGE := $(boot)/bzImage
-zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage
-
-zImage bzImage: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
- $(Q)mkdir -p $(objtree)/arch/i386/boot
- $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/i386/boot/bzImage
-
-compressed: zImage
-
-zlilo bzlilo: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zlilo
-
-zdisk bzdisk: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk
-
-fdimage fdimage144 fdimage288 isoimage: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
-
-install: vdso_install
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
-
-PHONY += vdso_install
-vdso_install:
- $(Q)$(MAKE) $(build)=arch/x86/vdso $@
-
-archclean:
- $(Q)rm -rf $(objtree)/arch/i386/boot
- $(Q)$(MAKE) $(clean)=arch/x86/boot
-
-define archhelp
- echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
- echo ' install - Install kernel using'
- echo ' (your) ~/bin/installkernel or'
- echo ' (distribution) /sbin/installkernel or'
- echo ' install to $$(INSTALL_PATH) and run lilo'
- echo ' bzdisk - Create a boot floppy in /dev/fd0'
- echo ' fdimage - Create a boot floppy image'
- echo ' isoimage - Create a boot CD-ROM image'
-endef
-
-CLEAN_FILES += arch/x86/boot/fdimage \
- arch/x86/boot/image.iso \
- arch/x86/boot/mtools.conf
diff --git a/arch/x86/Makefile_64 b/arch/x86/Makefile_64
deleted file mode 100644
index d12bb14..0000000
--- a/arch/x86/Makefile_64
+++ /dev/null
@@ -1,141 +0,0 @@
-#
-# x86_64 Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" and "archdep" for cleaning up and making dependencies for
-# this architecture
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-#
-# 19990713 Artur Skawina <skawina@...cities.com>
-# Added '-march' and '-mpreferred-stack-boundary' support
-# 20000913 Pavel Machek <pavel@...e.cz>
-# Converted for x86_64 architecture
-# 20010105 Andi Kleen, add IA32 compiler.
-# ....and later removed it again....
-#
-# $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $
-
-# BITS is used as extension for files which are available in a 32 bit
-# and a 64 bit version to simplify shared Makefiles.
-# e.g.: obj-y += foo_$(BITS).o
-BITS := 64
-export BITS
-
-LDFLAGS := -m elf_x86_64
-OBJCOPYFLAGS := -O binary -R .note -R .comment -S
-LDFLAGS_vmlinux :=
-CHECKFLAGS += -D__x86_64__ -m64
-
-cflags-y :=
-cflags-kernel-y :=
-cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
-cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
-# gcc doesn't support -march=core2 yet as of gcc 4.3, but I hope it
-# will eventually. Use -mtune=generic as fallback
-cflags-$(CONFIG_MCORE2) += \
- $(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
-cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
-
-cflags-y += -m64
-cflags-y += -mno-red-zone
-cflags-y += -mcmodel=kernel
-cflags-y += -pipe
-cflags-y += -Wno-sign-compare
-cflags-y += -fno-asynchronous-unwind-tables
-ifneq ($(CONFIG_DEBUG_INFO),y)
-# -fweb shrinks the kernel a bit, but the difference is very small
-# it also messes up debugging, so don't use it for now.
-#cflags-y += $(call cc-option,-fweb)
-endif
-# -funit-at-a-time shrinks the kernel .text considerably
-# unfortunately it makes reading oopses harder.
-cflags-y += $(call cc-option,-funit-at-a-time)
-# prevent gcc from generating any FP code by mistake
-cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
-# this works around some issues with generating unwind tables in older gccs
-# newer gccs do it by default
-cflags-y += -maccumulate-outgoing-args
-
-# do binutils support CFI?
-cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
-KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
-
-# is .cfi_signal_frame supported too?
-cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
-KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
-
-cflags-$(CONFIG_CC_STACKPROTECTOR) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh "$(CC)" -fstack-protector )
-cflags-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh "$(CC)" -fstack-protector-all )
-
-KBUILD_CFLAGS += $(cflags-y)
-CFLAGS_KERNEL += $(cflags-kernel-y)
-KBUILD_AFLAGS += -m64
-
-head-y := arch/x86/kernel/head_64.o arch/x86/kernel/head64.o arch/x86/kernel/init_task.o
-
-libs-y += arch/x86/lib/
-core-y += arch/x86/kernel/ \
- arch/x86/mm/ \
- arch/x86/crypto/ \
- arch/x86/vdso/
-core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/
-drivers-$(CONFIG_PCI) += arch/x86/pci/
-drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/
-
-boot := arch/x86/boot
-
-PHONY += bzImage bzlilo install archmrproper \
- fdimage fdimage144 fdimage288 isoimage archclean
-
-#Default target when executing "make"
-all: bzImage
-
-BOOTIMAGE := arch/x86/boot/bzImage
-KBUILD_IMAGE := $(BOOTIMAGE)
-
-bzImage: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) $(BOOTIMAGE)
- $(Q)mkdir -p $(objtree)/arch/x86_64/boot
- $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/x86_64/boot/bzImage
-
-bzlilo: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zlilo
-
-bzdisk: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zdisk
-
-fdimage fdimage144 fdimage288 isoimage: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
-
-install: vdso_install
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@
-
-vdso_install:
- $(Q)$(MAKE) $(build)=arch/x86/vdso $@
-
-archclean:
- $(Q)rm -rf $(objtree)/arch/x86_64/boot
- $(Q)$(MAKE) $(clean)=$(boot)
-
-define archhelp
- echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
- echo ' install - Install kernel using'
- echo ' (your) ~/bin/installkernel or'
- echo ' (distribution) /sbin/installkernel or'
- echo ' install to $$(INSTALL_PATH) and run lilo'
- echo ' bzdisk - Create a boot floppy in /dev/fd0'
- echo ' fdimage - Create a boot floppy image'
- echo ' isoimage - Create a boot CD-ROM image'
-endef
-
-CLEAN_FILES += arch/x86/boot/fdimage \
- arch/x86/boot/image.iso \
- arch/x86/boot/mtools.conf
-
-
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists