Message-Id: <83531397@web.de>
Date:	Thu, 03 Jan 2008 13:43:33 +0100
From:	devzero@....de
To:	linux-kernel@...r.kernel.org
Cc:	jengelh@...ux01.gwdg.de
Subject: Re: serial console _after_ boot ? - was: Redirect kernel console

hi !

i was wondering how to make kernel messages appear on /dev/ttyS0 without a reboot, i.e. kernelparam "console=ttyS0"

after playing for a while with setconsole, setterm and klogconsole i didn`t find a way to make that happen.

i can do "setconsole /dev/tty1 </dev/console" and then "echo test >/dev/console" and see "test" on tty1

"setterm -msg on -msglevel 8 >/dev/console"  (or >/dev/tty1), modprobe loop;rmmod loop - and i see the kernel message there
   
i can do "setconsole /dev/ttyS0 </dev/console" and then "echo test >/dev/console" and see "test" on ttyS0

BUT :

"setterm -msg on -msglevel 8 >/dev/console"  (or >/dev/ttyS0), modprobe loop;rmmod loop  ......  nothing!

since i came across jan`s posting from 2005, which didn`t get a reply i think it`s not that stupid to ask again...

any clue how to do that at runtime or what`s the issue here ? (see excerpts below) 

i can set 
regards
roland



List:       linux-kernel
Subject:    Redirect kernel console
From:       Jan Engelhardt <jengelh () linux01 ! gwdg ! de>
Date:       2005-08-13 12:48:22
Message-ID: Pine.LNX.4.61.0508131447220.4457 () yvahk01 ! tjqt ! qr
[Download message RAW]

Hi,


there is a klogconsole utiltity that allows to change the console to which 
kernel messages are printed. However, is it possible to redirect to ttyS0 
without a reboot?


Jan Engelhardt
------- 





>> Subject: Re: serial console _after_ boot ?

>> > Setterm outputs the correct escape sequences to stdout. You can 
>> > configure another tty using 'setterm -msglevel 8 -msg on > /dev/ttyS0'. 
>> > I tested this on the standard kernel consoles (/dev/tty1-9), and it 
>> > worked. You obviously need root access to write the escape sequences to 
>> > the tty's.
>> 
>> oh - yes, this works! but with tty1-9 only.
>> not with ttyS0 :(
>
>.....as the docs tell.....
>
> Some options  however  (marked  "virtual  consoles  only" below)  do  not  correspond to a terminfo(5) capability.
>
>      -msg [on|off] (virtual consoles only)
>              Enables or disables the sending of kernel printk() messages to the console.
>
>       -msglevel 1-8 (virtual consoles only)
>              Sets the console logging level for kernel printk() messages.  All messages strictly more important than  this
>              will  be  printed, so a logging level of 0 has the same effect as -msg on and a logging level of 8 will print
>              all kernel messages.  klogd(8) may be a more convenient interface to the logging of kernel messages.


> > > but i don`t have change_console. 
> > > searched the net and found that this eventually should be part of sysvinit package.
> > > but mine doesn`t provide that tool.
> > > 
> > > found "setconsole" which looks like something similar, but "setconsole /dev/ttyS0 < /dev/console"
> > > doesn`t have any effect
> > 
> > What distribution do you use? I have change_console on gentoo, yet I 
> > cannot find the tool on a debian etch. But that's a vserver, so it's 
> > probably not a reference.
> 
> i have opensuse 10.3

_____________________________________________________________________
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
http://smartsurfer.web.de/?mc=100071&distributionid=000000000066

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists