00 3a 00 00 SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdf: 398297088 512-byte hdwr sectors (203928 MB) sdf: Write Protect is off sdf: Mode Sense: 00 3a 00 00 SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sdf2 sdf3 sd 5:0:0:0: Attached scsi disk sdf ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20 sata_nv 0000:00:08.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:08.0 to 64 ata7: SATA max UDMA/133 cmd 0xFFFFC20000028480 ctl 0xFFFFC200000284A0 bmdma 0xB800 irq 20 ata8: SATA max UDMA/133 cmd 0xFFFFC20000028580 ctl 0xFFFFC200000285A0 bmdma 0xB808 irq 20 scsi6 : sata_nv ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata7.00: ATA-7, max UDMA/133, 398297088 sectors: LBA48 NCQ (depth 31/32) ata7.00: ata7: dev 0 multi count 16 ata7.00: configured for UDMA/133 scsi7 : sata_nv ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata8.00: ATA-7, max UDMA/133, 490234752 sectors: LBA48 NCQ (depth 31/32) ata8.00: ata8: dev 0 multi count 16 ata8.00: configured for UDMA/133 scsi 6:0:0:0: Direct-Access ATA Maxtor 6L200S0 BACE PQ: 0 ANSI: 5 ata7: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 SCSI device sdg: 398297088 512-byte hdwr sectors (203928 MB) sdg: Write Protect is off sdg: Mode Sense: 00 3a 00 00 SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdg: 398297088 512-byte hdwr sectors (203928 MB) sdg: Write Protect is off sdg: Mode Sense: 00 3a 00 00 SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdg: sdg1 sdg2 sdg3 sd 6:0:0:0: Attached scsi disk sdg scsi 7:0:0:0: Direct-Access ATA Maxtor 6L250S0 BACE PQ: 0 ANSI: 5 ata8: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 SCSI device sdh: 490234752 512-byte hdwr sectors (251000 MB) sdh: Write Protect is off sdh: Mode Sense: 00 3a 00 00 SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdh: 490234752 512-byte hdwr sectors (251000 MB) sdh: Write Protect is off sdh: Mode Sense: 00 3a 00 00 SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdh: sdh1 sdh2 sdh3 sdh4 sd 7:0:0:0: Attached scsi disk sdh pata_amd 0000:00:06.0: version 0.2.7 ata: 0x170 IDE port busy ata: conflict with ide1 PCI: Setting latency timer of device 0000:00:06.0 to 64 ata9: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xE000 irq 14 ata10: DUMMY scsi8 : pata_amd ATA: abnormal status 0x8 on port 0x1F7 scsi9 : pata_amd usbmon: debugfs is not available ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected usb 1-5: new low speed USB device using ohci_hcd and address 2 usb 1-5: configuration #1 chosen from 1 choice usb 1-6: new full speed USB device using ohci_hcd and address 3 usb 1-6: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB Receiver as /class/input/input0 input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-5 input: Logitech USB Receiver as /class/input/input1 input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-5 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: raid10 personality registered for level 10 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 15 md: Skipping autodetection of RAID arrays. (raid=noautodetect) md: Loading md_d1: /dev/sdh3 md: bind md: bind md: bind md: bind md: bind raid10: raid set md_d1 active with 5 out of 6 devices md_d1: bitmap initialized from disk: read 11/11 pages, set 228551 bits, status: 0 created bitmap (167 pages) for device md_d1 md_d1: p1 p2 p3 md_d1: p1 p2 p3 ReiserFS: md_d1p2: found reiserfs format "3.6" with standard journal ReiserFS: md_d1p2: using ordered data mode ReiserFS: md_d1p2: journal params: device md_d1p2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md_d1p2: checking transaction log (md_d1p2) ReiserFS: md_d1p2: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem). Freeing unused kernel memory: 228k freed sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 3:0:0:0: Attached scsi generic sg3 type 0 sd 4:0:0:0: Attached scsi generic sg4 type 0 sd 5:0:0:0: Attached scsi generic sg5 type 0 sd 6:0:0:0: Attached scsi generic sg6 type 0 sd 7:0:0:0: Attached scsi generic sg7 type 0 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA ieee1394: Initialized config rom entry `ip1394' Initializing USB Mass Storage driver... scsi10 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning eth0: forcedeth.c: subsystem: 01462:7125 bound to 0000:00:0a.0 ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19 udev: renamed network interface eth0 to eth1 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000cbb4fa] input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (22 C) Capability LSM initialized Bridge firewalling registered 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller md: md0 stopped. md: bind md: bind md: bind md: bind md: bind md: raid1 personality registered for level 1 raid1: raid set md0 active with 5 out of 5 mirrors md0: bitmap initialized from disk: read 2/2 pages, set 0 bits, status: 0 created bitmap (17 pages) for device md0 md: md_d2 stopped. md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind raid5: automatically using best checksumming function: generic_sse generic_sse: 5237.000 MB/sec raid5: using function: generic_sse (5237.000 MB/sec) raid6: int64x1 2064 MB/s raid6: int64x2 2743 MB/s raid6: int64x4 2927 MB/s raid6: int64x8 1961 MB/s raid6: sse2x1 1974 MB/s raid6: sse2x2 2164 MB/s raid6: sse2x4 2533 MB/s raid6: using algorithm sse2x4 (2533 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: device sdg1 operational as raid disk 0 raid5: device sdh1 operational as raid disk 7 raid5: device sdd1 operational as raid disk 6 raid5: device sdf1 operational as raid disk 5 raid5: device sde1 operational as raid disk 4 raid5: device sda1 operational as raid disk 3 raid5: device sdb1 operational as raid disk 2 raid5: device sdc1 operational as raid disk 1 raid5: allocated 8462kB for md_d2 raid5: raid level 5 set md_d2 active with 8 out of 8 devices, algorithm 2 RAID5 conf printout: --- rd:8 wd:8 disk 0, o:1, dev:sdg1 disk 1, o:1, dev:sdc1 disk 2, o:1, dev:sdb1 disk 3, o:1, dev:sda1 disk 4, o:1, dev:sde1 disk 5, o:1, dev:sdf1 disk 6, o:1, dev:sdd1 disk 7, o:1, dev:sdh1 md_d2: bitmap initialized from disk: read 12/12 pages, set 0 bits, status: 0 created bitmap (187 pages) for device md_d2 md_d2: p1 device-mapper: snapshots: Snapshot is marked invalid. scsi 10:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 sd 10:0:0:0: Attached scsi removable disk sdi sd 10:0:0:0: Attached scsi generic sg8 type 0 scsi 10:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 sd 10:0:0:1: Attached scsi removable disk sdj sd 10:0:0:1: Attached scsi generic sg9 type 0 scsi 10:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 sd 10:0:0:2: Attached scsi removable disk sdk sd 10:0:0:2: Attached scsi generic sg10 type 0 scsi 10:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 10:0:0:3: Attached scsi removable disk sdl sd 10:0:0:3: Attached scsi generic sg11 type 0 usb-storage: device scan complete Buffer I/O error on device dm-8, logical block 78675952 Buffer I/O error on device dm-8, logical block 78675952 Buffer I/O error on device dm-8, logical block 78675966 Buffer I/O error on device dm-8, logical block 78675966 Buffer I/O error on device dm-8, logical block 0 Buffer I/O error on device dm-8, logical block 0 Buffer I/O error on device dm-8, logical block 0 Buffer I/O error on device dm-8, logical block 78675967 Buffer I/O error on device dm-8, logical block 78675967 Buffer I/O error on device dm-8, logical block 78675967 ReiserFS: md0: warning: read_super_block: found reiserfs format "3.6" with non-standard journal ReiserFS: md0: using ordered data mode ReiserFS: md0: journal params: device md0, size 512, journal first block 18, max trans len 256, max batch 225, max commit age 30, max trans age 30 ReiserFS: md0: checking transaction log (md0) ReiserFS: md0: Using r5 hash to sort names Adding 2097144k swap on /dev/md_d1p1. Priority:-1 extents:1 across:2097144k eth1.1: dev_set_promiscuity(master, 1) device eth1 entered promiscuous mode device eth1.1 entered promiscuous mode eth1.6: dev_set_promiscuity(master, 1) device eth1.6 entered promiscuous mode eth1.8: dev_set_promiscuity(master, 1) device eth1.8 entered promiscuous mode eth1.9: dev_set_promiscuity(master, 1) device eth1.9 entered promiscuous mode xenbr1: port 1(eth1.1) entering learning state xenbr1: topology change detected, propagating xenbr1: port 1(eth1.1) entering forwarding state xenbr6: port 1(eth1.6) entering learning state xenbr6: topology change detected, propagating xenbr6: port 1(eth1.6) entering forwarding state xenbr8: port 1(eth1.8) entering learning state xenbr8: topology change detected, propagating xenbr8: port 1(eth1.8) entering forwarding state xenbr9: port 1(eth1.9) entering learning state xenbr9: topology change detected, propagating xenbr9: port 1(eth1.9) entering forwarding state NET: Registered protocol family 17 device vif1.0 entered promiscuous mode xenbr9: port 2(vif1.0) entering learning state xenbr9: topology change detected, propagating xenbr9: port 2(vif1.0) entering forwarding state device vif2.0 entered promiscuous mode xenbr9: port 3(vif2.0) entering learning state xenbr9: topology change detected, propagating xenbr9: port 3(vif2.0) entering forwarding state blkback: ring-ref 8, event-channel 6, protocol 2 (x86_32-abi) xenbr9: port 3(vif2.0) entering disabled state device vif2.0 left promiscuous mode xenbr9: port 3(vif2.0) entering disabled state md: md_d2 stopped. md: unbind md: export_rdev(sdg1) md: unbind md: export_rdev(sdh1) md: unbind md: export_rdev(sdd1) md: unbind md: export_rdev(sdf1) md: unbind md: export_rdev(sde1) md: unbind md: export_rdev(sda1) md: unbind md: export_rdev(sdb1) md: unbind md: export_rdev(sdc1) md: md2 stopped. md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind raid5: device sdg1 operational as raid disk 0 raid5: device sdh1 operational as raid disk 7 raid5: device sdd1 operational as raid disk 6 raid5: device sdf1 operational as raid disk 5 raid5: device sde1 operational as raid disk 4 raid5: device sda1 operational as raid disk 3 raid5: device sdb1 operational as raid disk 2 raid5: device sdc1 operational as raid disk 1 raid5: allocated 8462kB for md2 raid5: raid level 5 set md2 active with 8 out of 8 devices, algorithm 2 RAID5 conf printout: --- rd:8 wd:8 disk 0, o:1, dev:sdg1 disk 1, o:1, dev:sdc1 disk 2, o:1, dev:sdb1 disk 3, o:1, dev:sda1 disk 4, o:1, dev:sde1 disk 5, o:1, dev:sdf1 disk 6, o:1, dev:sdd1 disk 7, o:1, dev:sdh1 md2: bitmap initialized from disk: read 12/12 pages, set 0 bits, status: 0 created bitmap (187 pages) for device md2 device vif3.0 entered promiscuous mode xenbr9: port 3(vif3.0) entering learning state xenbr9: topology change detected, propagating xenbr9: port 3(vif3.0) entering forwarding state blkback: ring-ref 8, event-channel 6, protocol 2 (x86_32-abi) blkback: ring-ref 9, event-channel 7, protocol 2 (x86_32-abi) ata5: EH in ADMA mode, notifier 0xFFFFFFF notifier_error 0x0 gen_ctl 0x1501000 status 0x1540 ata5: CPB 0: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 1: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 2: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 3: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 4: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 5: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 6: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 7: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 8: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 9: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 10: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 11: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 12: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 13: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 14: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 15: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 16: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 17: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 18: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 19: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 20: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 21: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 22: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 23: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 24: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 25: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 26: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 27: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 28: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 29: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 30: ctl_flags 0x1f, resp_flags 0x1 ata5: Resetting port ata5.00: exception Emask 0x0 SAct 0xfffffff SErr 0x0 action 0x2 frozen ata5.00: cmd 61/18:00:f7:c0:97/00:00:04:00:00/40 tag 0 cdb 0x0 data 12288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 61/18:08:17:c1:97/00:00:04:00:00/40 tag 1 cdb 0x0 data 12288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 61/18:10:37:c1:97/00:00:04:00:00/40 tag 2 cdb 0x0 data 12288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 61/10:18:57:c1:97/00:00:04:00:00/40 tag 3 cdb 0x0 data 8192 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 61/18:20:6f:c1:97/00:00:04:00:00/40 tag 4 cdb 0x0 data 12288 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 61/08:28:b7:c1:97/00:00:04:00:00/40 tag 5 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 61/08:30:bf:c1:97/00:00:04:00:00/40 tag 6 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 61/28:38:e7:c1:97/00:00:04:00:00/40 tag 7 cdb 0x0 data 20480 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 61/08:40:17:c2:97/00:00:04:00:00/40 tag 8 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/18:48:d7:c0:97/00:00:04:00:00/40 tag 9 cdb 0x0 data 12288 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/30:50:47:c0:97/00:00:04:00:00/40 tag 10 cdb 0x0 data 24576 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/20:58:e7:c2:97/00:00:04:00:00/40 tag 11 cdb 0x0 data 16384 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/18:60:07:c3:97/00:00:04:00:00/40 tag 12 cdb 0x0 data 12288 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/08:68:27:c3:97/00:00:04:00:00/40 tag 13 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/28:70:87:c0:97/00:00:04:00:00/40 tag 14 cdb 0x0 data 20480 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/08:78:77:c0:97/00:00:04:00:00/40 tag 15 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/08:80:af:c0:97/00:00:04:00:00/40 tag 16 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/10:88:bf:c0:97/00:00:04:00:00/40 tag 17 cdb 0x0 data 8192 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/08:90:cf:c0:97/00:00:04:00:00/40 tag 18 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/18:98:2f:c3:97/00:00:04:00:00/40 tag 19 cdb 0x0 data 12288 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 61/08:a0:4f:c2:97/00:00:04:00:00/40 tag 20 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 61/08:a8:8f:c2:97/00:00:04:00:00/40 tag 21 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 61/08:b0:c7:c2:97/00:00:04:00:00/40 tag 22 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/10:b8:47:c3:97/00:00:04:00:00/40 tag 23 cdb 0x0 data 8192 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/30:c0:5f:c3:97/00:00:04:00:00/40 tag 24 cdb 0x0 data 24576 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/38:c8:97:c3:97/00:00:04:00:00/40 tag 25 cdb 0x0 data 28672 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/30:d0:d7:c3:97/00:00:04:00:00/40 tag 26 cdb 0x0 data 24576 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/30:d8:0f:c4:97/00:00:04:00:00/40 tag 27 cdb 0x0 data 24576 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl 0x1501000 status 0x500 ata6: CPB 0: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 1: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 2: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 3: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 4: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 5: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 6: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 7: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 8: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 9: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 10: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 11: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 12: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 13: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 14: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 15: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 16: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 17: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 18: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 19: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 20: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 21: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 22: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 23: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 24: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 25: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 26: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 27: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 28: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 29: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 30: ctl_flags 0x1f, resp_flags 0x1 ata6: Resetting port sd 5:0:0:0: SCSI error: return code = 0x06000000 end_request: I/O error, dev sdf, sector 77054047 sd 5:0:0:0: SCSI error: return code = 0x06000000 end_request: I/O error, dev sdf, sector 77054111 sd 5:0:0:0: SCSI error: return code = 0x06000000 end_request: I/O error, dev sdf, sector 77054167 sd 5:0:0:0: SCSI error: return code = 0x06000000 end_request: I/O error, dev sdf, sector 77054223 sd 5:0:0:0: SCSI error: return code = 0x06000000 end_request: I/O error, dev sdf, sector 77054287 sd 5:0:0:0: SCSI error: return code = 0x06000000 end_request: I/O error, dev sdf, sector 77054343 sd 5:0:0:0: SCSI error: return code = 0x06000000 end_request: I/O error, dev sdf, sector 77054015 raid5: Disk failure on sdf1, disabling device. Operation continuing on 7 devices sd 5:0:0:0: SCSI error: return code = 0x06000000 end_request: I/O error, dev sdf, sector 77054199 sd 5:0:0:0: SCSI error: return code = 0x06000000 end_request: I/O error, dev sdf, sector 77054231 sd 5:0:0:0: SCSI error: return code = 0x06000000 end_request: I/O error, dev sdf, sector 77054263 sd 5:0:0:0: SCSI error: return code = 0x06000000 end_request: I/O error, dev sdf, sector 77054295 ata5: soft resetting port ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5.00: configured for UDMA/133 ata5: EH complete SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB) sde: Write Protect is off sde: Mode Sense: 00 3a 00 00 SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA RAID5 conf printout: --- rd:8 wd:7 disk 0, o:1, dev:sdg1 disk 1, o:1, dev:sdc1 disk 2, o:1, dev:sdb1 disk 3, o:1, dev:sda1 disk 4, o:1, dev:sde1 disk 5, o:0, dev:sdf1 disk 6, o:1, dev:sdd1 disk 7, o:1, dev:sdh1 RAID5 conf printout: --- rd:8 wd:7 disk 0, o:1, dev:sdg1 disk 1, o:1, dev:sdc1 disk 2, o:1, dev:sdb1 disk 3, o:1, dev:sda1 disk 4, o:1, dev:sde1 disk 6, o:1, dev:sdd1 disk 7, o:1, dev:sdh1 md: unbind md: export_rdev(sdf1) md: bind RAID5 conf printout: --- rd:8 wd:7 disk 0, o:1, dev:sdg1 disk 1, o:1, dev:sdc1 disk 2, o:1, dev:sdb1 disk 3, o:1, dev:sda1 disk 4, o:1, dev:sde1 disk 5, o:1, dev:sdf1 disk 6, o:1, dev:sdd1 disk 7, o:1, dev:sdh1 md: recovery of RAID array md2 md: minimum _guaranteed_ speed: 1000 KB/sec/disk. md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. md: using 128k window, over a total of 195358208 blocks. md: md2: recovery done. RAID5 conf printout: --- rd:8 wd:8 disk 0, o:1, dev:sdg1 disk 1, o:1, dev:sdc1 disk 2, o:1, dev:sdb1 disk 3, o:1, dev:sda1 disk 4, o:1, dev:sde1 disk 5, o:1, dev:sdf1 disk 6, o:1, dev:sdd1 disk 7, o:1, dev:sdh1 ata5: EH in ADMA mode, notifier 0xFF notifier_error 0x0 gen_ctl 0x1501000 status 0x1540 ata5: CPB 0: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 1: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 2: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 3: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 4: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 5: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 6: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 7: ctl_flags 0x1f, resp_flags 0x1 ata6: EH in ADMA mode, notifier 0x1FFFF notifier_error 0x0 gen_ctl 0x1501000 status 0x1540 ata6: CPB 0: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 1: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 2: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 3: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 4: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 5: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 6: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 7: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 8: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 9: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 10: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 11: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 12: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 13: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 14: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 15: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 16: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 17: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 18: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 19: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 20: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 21: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 22: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 23: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 24: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 25: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 26: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 27: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 28: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 29: ctl_flags 0x1f, resp_flags 0x1 ata6: CPB 30: ctl_flags 0x1f, resp_flags 0x1 ata6: Resetting port ata5: CPB 8: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 9: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 10: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 11: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 12: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 13: ctl_flags 0x1f, resp_flags 0x1 ata6.00: exception Emask 0x0 SAct 0x1ffff SErr 0x0 action 0x2 frozen ata6.00: cmd 60/08:00:ef:74:97/00:00:04:00:00/40 tag 0 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 60/08:08:7f:74:97/00:00:04:00:00/40 tag 1 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 60/08:10:b7:74:97/00:00:04:00:00/40 tag 2 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 60/08:18:2f:75:97/00:00:04:00:00/40 tag 3 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 60/08:20:67:75:97/00:00:04:00:00/40 tag 4 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 60/08:28:9f:75:97/00:00:04:00:00/40 tag 5 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 60/08:30:df:75:97/00:00:04:00:00/40 tag 6 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 60/08:38:17:76:97/00:00:04:00:00/40 tag 7 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 60/08:40:4f:76:97/00:00:04:00:00/40 tag 8 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 60/08:48:8f:76:97/00:00:04:00:00/40 tag 9 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 60/08:50:c7:76:97/00:00:04:00:00/40 tag 10 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 60/08:58:ff:76:97/00:00:04:00:00/40 tag 11 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 60/10:60:27:77:97/00:00:04:00:00/40 tag 12 cdb 0x0 data 8192 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 60/18:68:3f:77:97/00:00:04:00:00/40 tag 13 cdb 0x0 data 12288 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 60/08:70:77:77:97/00:00:04:00:00/40 tag 14 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 61/08:78:3f:74:97/00:00:04:00:00/40 tag 15 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata6.00: cmd 60/08:80:af:77:97/00:00:04:00:00/40 tag 16 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5: CPB 14: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 15: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 16: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 17: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 18: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 19: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 20: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 21: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 22: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 23: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 24: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 25: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 26: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 27: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 28: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 29: ctl_flags 0x1f, resp_flags 0x1 ata5: CPB 30: ctl_flags 0x1f, resp_flags 0x1 ata5: Resetting port ata5.00: exception Emask 0x0 SAct 0xff SErr 0x0 action 0x2 frozen ata5.00: cmd 60/08:00:cf:77:97/00:00:04:00:00/40 tag 0 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/08:08:07:78:97/00:00:04:00:00/40 tag 1 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/08:10:37:78:97/00:00:04:00:00/40 tag 2 cdb 0x0 data 4096 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 61/08:18:1f:77:97/00:00:04:00:00/40 tag 3 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/10:20:27:77:97/00:00:04:00:00/40 tag 4 cdb 0x0 data 8192 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 60/18:28:3f:77:97/00:00:04:00:00/40 tag 5 cdb 0x0 data 12288 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 61/08:30:57:77:97/00:00:04:00:00/40 tag 6 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5.00: cmd 61/08:38:8f:77:97/00:00:04:00:00/40 tag 7 cdb 0x0 data 4096 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata5: soft resetting port ata6: soft resetting port ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5.00: configured for UDMA/133 ata5: EH complete ata6.00: configured for UDMA/133 ata6: EH complete SCSI device sde: 398297088 512-byte hdwr sectors (203928 MB) sde: Write Protect is off sde: Mode Sense: 00 3a 00 00 SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdf: 398297088 512-byte hdwr sectors (203928 MB) sdf: Write Protect is off sdf: Mode Sense: 00 3a 00 00 SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA