| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 10 Jan 2008 23:54:45 -0800
From: Yinghai Lu <Yinghai.Lu@....COM>
To: Ingo Molnar <mingo@...e.hu>, Andi Kleen <ak@...e.de>,
Andrew Morton <akpm@...ux-foundation.org>,
Christoph Lameter <clameter@....com>, ebiederm@...ssion.com,
Thomas Gleixner <tglx@...utronix.de>
Cc: LKML <linux-kernel@...r.kernel.org>
Subject: [PATCH] x86-64: disable the GART early v2
please check the one that can be applied to x86.git -mm
YH
[PATCH] x86-64: disable the GART early v2
For K8 system: 4G RAM with memory hole remapping enabled, or more than 4G RAM
installed.
when try to use kexec second kernel, and the first doesn't include gart_shutdown.
the second kernel could have different aper position than the first kernel. and second
kernel could use that hole as RAM that is still used by GART set by the first kernel.
esp. when try to kexec 2.6.24 with sparse mem enable from previous kernel (from RHEL 5
or SLES 10). the new kernel will use aper by GART (set by first kernel) for vmemmap.
and after new kernel setting one new GART. the position will be real RAM. the _mapcount
set is lost.
Bad page state in process 'swapper'
page:ffffe2000e600020 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Pid: 0, comm: swapper Not tainted 2.6.24-rc7-smp-gcdf71a10-dirty #13
Call Trace:
[<ffffffff8026401f>] bad_page+0x63/0x8d
[<ffffffff80264169>] __free_pages_ok+0x7c/0x2a5
[<ffffffff80ba75d1>] free_all_bootmem_core+0xd0/0x198
[<ffffffff80ba3a42>] numa_free_all_bootmem+0x3b/0x76
[<ffffffff80ba3461>] mem_init+0x3b/0x152
[<ffffffff80b959d3>] start_kernel+0x236/0x2c2
[<ffffffff80b9511a>] _sinittext+0x11a/0x121
and
[ffffe2000e600000-ffffe2000e7fffff] PMD ->ffff81001c200000 on node 0
phys addr is : 0x1c200000
RHEL 5.1 kernel -53 said:
PCI-DMA: aperture base @ 1c000000 size 65536 KB
new kernel said:
Mapping aperture over 65536 KB of RAM @ 3c000000
So try to disable that GART as early as possible.
Signed-off-by: Yinghai Lu <yinghai.lu@....com>
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 52d2bea..6e7af45 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -218,6 +218,73 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp)
return 0;
}
+void __init early_gart_iommu_disable(void)
+{
+ /*
+ * disable it in case it is enabled before, esp for kexec/kdump,
+ * previous kernel already enable that. otherwise memset called
+ * by allocate_aperture/__alloc_bootmem_nopanic cause restart.
+ * or second kernel have different position for GART hole. and new
+ * kernel could use hole as RAM that is still used by GART set by
+ * first kernel
+ */
+ int fix, num;
+ u32 ctl;
+ u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0;
+ u64 aper_base, last_aper_base = 0;
+ int valid_agp = 0;
+
+ if (!early_pci_allowed())
+ return;
+
+ fix = 0;
+ for (num = 24; num < 32; num++) {
+ if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
+ continue;
+
+ aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7;
+ aper_size = (32 * 1024 * 1024) << aper_order;
+ aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff;
+ aper_base <<= 25;
+
+ if (!aperture_valid(aper_base, aper_size)) {
+ fix = 1;
+ break;
+ }
+
+ if ((last_aper_order && aper_order != last_aper_order) ||
+ (last_aper_base && aper_base != last_aper_base)) {
+ fix = 1;
+ break;
+ }
+ last_aper_order = aper_order;
+ last_aper_base = aper_base;
+ }
+
+ if (!fix)
+ return;
+
+ aper_alloc = search_agp_bridge(&aper_order, &valid_agp);
+
+ if (aper_alloc) {
+ /*
+ * could get aper later or before from the AGP bridge,
+ * so it is safe
+ */
+ return;
+ }
+
+ for (num = 24; num < 32; num++) {
+ if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
+ continue;
+
+ ctl = read_pci_config(0, num, 3, 0x90);
+ ctl &= ~1;
+ write_pci_config(0, num, 3, 0x90, ctl);
+ }
+
+}
+
void __init gart_iommu_hole_init(void)
{
u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0;
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index 998ce03..da82065 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -54,6 +54,7 @@
#include <video/edid.h>
#include <asm/e820.h>
#include <asm/dma.h>
+#include <asm/gart.h>
#include <asm/mpspec.h>
#include <asm/mmu_context.h>
#include <asm/proto.h>
@@ -358,6 +359,8 @@ void __init setup_arch(char **cmdline_p)
discover_ebda();
+ early_gart_iommu_disable();
+
init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT));
if (efi_enabled)
efi_init();
diff --git a/include/asm-x86/gart.h b/include/asm-x86/gart.h
index f704c50..2ca68c6 100644
--- a/include/asm-x86/gart.h
+++ b/include/asm-x86/gart.h
@@ -9,6 +9,7 @@ extern int iommu_detected;
extern void gart_iommu_init(void);
extern void gart_iommu_shutdown(void);
extern void __init gart_parse_options(char *);
+extern void early_gart_iommu_disable(void);
extern void gart_iommu_hole_init(void);
extern int fallback_aper_order;
extern int fallback_aper_force;
@@ -20,6 +21,10 @@ extern int fix_aperture;
#define gart_iommu_aperture 0
#define gart_iommu_aperture_allowed 0
+static inline void early_gart_iommu_disable(void)
+{
+}
+
static inline void gart_iommu_shutdown(void)
{
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists