linux-kernel - Re: Huawei EC321 CDMA PCCARD support broken

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1200150995.6525.14.camel@Cruella>
Date:	Sat, 12 Jan 2008 23:16:34 +0800
From:	张韡武 <zhangweiwu@...lss.com>
To:	Matthias Urlichs <smurf@...rf.noris.de>
Cc:	linux-kernel@...r.kernel.org, hugh@...mings.org
Subject: Re: Huawei EC321 CDMA PCCARD support broken


在 2008-01-08二的 07:27 +0100，Matthias Urlichs写道：
> Hi,
> > A lot of google searches reflect that, the latest kernel supporting
> > Huawei EC321 CDMA PCCARD is 2.6.17. My version (2.6.22-14 on Ubuntu)
> > doesn't work.
> > 
> This is probably because ...
> 
> > [ 3804.140000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
> 
> ... the card is in fact recognized by the pl2303 driver instead of the
> Option driver. This driver may do something stupid.

I am not sure if it's the case. I just managed to compile a kernel in
Ubuntu myself, and I used the config file of default Ubuntu kernel, only
with a slight twist:

# CONFIG_USB_SERIAL_PL2303 is not set

Using the new kernel, I got:

[  177.916000] ehci_hcd 0000:16:00.2: irq 20, io mem 0x50002000
[  178.016000] usb 6-1: new full speed USB device using ohci_hcd and address 2
[  178.016000] ehci_hcd 0000:16:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2
004
[  178.016000] usb usb8: configuration #1 chosen from 1 choice
[  178.016000] hub 8-0:1.0: USB hub found
[  178.016000] hub 8-0:1.0: 2 ports detected
[  178.888000] usb 6-1: new full speed USB device using ohci_hcd and address 3
[  180.120000] usb 6-1: new full speed USB device using ohci_hcd and address 4
[  180.388000] usb 6-1: configuration #1 chosen from 1 choice
[  180.392000] option 6-1:1.0: GSM modem (1-port) converter detected
[  180.392000] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB0
[  180.396000] option 6-1:1.1: GSM modem (1-port) converter detected
[  180.396000] usb 6-1: GSM modem (1-port) converter now attached to ttyUSB1

Also 'lsmod' told me the module 'pl2303' is not loaded. Do the dialing I
got the same problem:

[snip]
WvDial<*1>: Carrier detected.  Waiting for prompt.
WvDial<Err>: Connected, but carrier signal lost!  Retrying...

Later I will try a Ubuntu 6.04 live CD to see if the same hardware works
for 6.04 myself (previous i only read that it worked for 6.04).

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/