[ 0.000000] Linux version 2.6.24-rc7-git (root@strider) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP PREEMPT Mon Jan 14 13:31:01 EST 2008 [ 0.000000] Command line: root=UUID=f7f3edd7-7022-4b63-a1f2-d4cace42ac1a ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f692400 (usable) [ 0.000000] BIOS-e820: 000000003f692400 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 259730) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FBBF0, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 3F693E00, 005C (r1 DELL M08 27D7080F ASL 61) [ 0.000000] ACPI: FACP 3F693C9C, 00F4 (r4 DELL M08 27D7080F ASL 61) [ 0.000000] ACPI: DSDT 3F694400, 567C (r2 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 3F6A2C00, 0040 [ 0.000000] ACPI: HPET 3F693F00, 0038 (r1 DELL M08 1 ASL 61) [ 0.000000] ACPI: APIC 3F694000, 0068 (r1 DELL M08 27D7080F ASL 47) [ 0.000000] ACPI: MCFG 3F693FC0, 003E (r16 DELL M08 27D7080F ASL 61) [ 0.000000] ACPI: SLIC 3F69409C, 0024 (r1 DELL M08 27D7080F ASL 61) [ 0.000000] ACPI: BOOT 3F693BC0, 0028 (r1 DELL M08 27D7080F ASL 61) [ 0.000000] ACPI: SSDT 3F692682, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003f692000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 259730) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000003f692000 [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 259730 [ 0.000000] On node 0 totalpages: 259633 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1228 pages reserved [ 0.000000] DMA zone: 2715 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3494 pages used for memmap [ 0.000000] DMA32 zone: 252140 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b8000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 35128 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 254855 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=f7f3edd7-7022-4b63-a1f2-d4cace42ac1a ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 7.824213] Marking TSC unstable due to TSCs unsynchronized [ 7.824216] time.c: Detected 1496.253 MHz processor. [ 7.825881] Console: colour VGA+ 80x25 [ 7.825886] console [tty0] enabled [ 7.825906] Checking aperture... [ 7.825920] Calgary: detecting Calgary via BIOS EBDA area [ 7.825922] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 7.836700] Memory: 975024k/1038920k available (2535k kernel code, 63508k reserved, 1310k data, 340k init) [ 7.836743] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 7.896157] Calibrating delay using timer specific routine.. 2995.52 BogoMIPS (lpj=1497763) [ 7.896200] Security Framework initialized [ 7.896208] SELinux: Disabled at boot. [ 7.896213] Capability LSM initialized [ 7.896380] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 7.897111] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 7.897456] Mount-cache hash table entries: 256 [ 7.897620] CPU: L1 I cache: 32K, L1 D cache: 32K [ 7.897624] CPU: L2 cache: 2048K [ 7.897627] CPU 0/0 -> Node 0 [ 7.897629] using mwait in idle threads. [ 7.897631] CPU: Physical Processor ID: 0 [ 7.897632] CPU: Processor Core ID: 0 [ 7.897641] CPU0: Thermal monitoring enabled (TM2) [ 7.897656] SMP alternatives: switching to UP code [ 7.898376] ACPI: Core revision 20070126 [ 7.913673] Using local APIC timer interrupts. [ 7.980483] APIC timer calibration result 10390652 [ 7.980485] Detected 10.390 MHz APIC timer. [ 7.980629] SMP alternatives: switching to SMP code [ 7.981150] Booting processor 1/2 APIC 0x1 [ 7.991667] Initializing CPU#1 [ 8.051448] Calibrating delay using timer specific routine.. 2992.36 BogoMIPS (lpj=1496180) [ 8.051457] CPU: L1 I cache: 32K, L1 D cache: 32K [ 8.051459] CPU: L2 cache: 2048K [ 8.051461] CPU 1/1 -> Node 0 [ 8.051463] CPU: Physical Processor ID: 0 [ 8.051465] CPU: Processor Core ID: 1 [ 8.051472] CPU1: Thermal monitoring enabled (TM2) [ 8.051861] Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz stepping 0d [ 8.051975] Brought up 2 CPUs [ 8.052074] CPU0 attaching sched-domain: [ 8.052077] domain 0: span 03 [ 8.052079] groups: 01 02 [ 8.052083] domain 1: span 03 [ 8.052085] groups: 03 [ 8.052088] CPU1 attaching sched-domain: [ 8.052090] domain 0: span 03 [ 8.052092] groups: 02 01 [ 8.052095] domain 1: span 03 [ 8.052097] groups: 03 [ 8.052332] khelper used greatest stack depth: 6592 bytes left [ 8.052430] net_namespace: 120 bytes [ 8.052921] NET: Registered protocol family 16 [ 8.053246] ACPI: bus type pci registered [ 8.053334] khelper used greatest stack depth: 6088 bytes left [ 8.055344] PCI: Using MMCONFIG at f8000000 - fbffffff [ 8.066115] ACPI: EC: Look up EC in DSDT [ 8.127905] ACPI: Interpreter enabled [ 8.127910] ACPI: (supports S0 S3 S5) [ 8.127923] ACPI: Using IOAPIC for interrupt routing [ 8.154874] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 8.155696] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 8.155701] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 8.157209] PCI: Transparent bridge - 0000:00:1e.0 [ 8.157250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 8.157986] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 8.158217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 8.158395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 8.158566] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 8.158737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 8.175621] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 8.175779] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 8.175938] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 [ 8.176092] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) [ 8.176245] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 8.176402] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 8.176558] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 8.176698] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 8.176893] Linux Plug and Play Support v0.97 (c) Adam Belay [ 8.176937] pnp: PnP ACPI init [ 8.176947] ACPI: bus type pnp registered [ 8.229546] pnpacpi: exceeded the max number of mem resources: 12 [ 8.229606] pnpacpi: exceeded the max number of mem resources: 12 [ 8.229661] pnpacpi: exceeded the max number of mem resources: 12 [ 8.229716] pnpacpi: exceeded the max number of mem resources: 12 [ 8.229774] pnpacpi: exceeded the max number of mem resources: 12 [ 8.229829] pnpacpi: exceeded the max number of mem resources: 12 [ 8.229885] pnpacpi: exceeded the max number of mem resources: 12 [ 8.230216] pnp: PnP ACPI: found 12 devices [ 8.230219] ACPI: ACPI bus type pnp unregistered [ 8.230529] PCI: Using ACPI for IRQ routing [ 8.230532] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 8.233776] NET: Registered protocol family 8 [ 8.233778] NET: Registered protocol family 20 [ 8.233820] DMAR:No DMAR devices found [ 8.233832] PCI-GART: No AMD northbridge found. [ 8.233840] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 8.233845] hpet0: 3 64-bit timers, 14318180 Hz [ 8.234898] ACPI: RTC can wake from S4 [ 8.235338] Time: hpet clocksource has been installed. [ 8.235355] Switched to high resolution mode on CPU 0 [ 8.235770] Switched to high resolution mode on CPU 1 [ 8.239698] system 00:05: ioport range 0xc80-0xcff could not be reserved [ 8.239708] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 8.239714] system 00:09: ioport range 0x900-0x97f has been reserved [ 8.239718] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 8.239721] system 00:09: ioport range 0x1000-0x1005 has been reserved [ 8.239724] system 00:09: ioport range 0x1008-0x100f has been reserved [ 8.239731] system 00:0a: ioport range 0xf400-0xf4fe has been reserved [ 8.239734] system 00:0a: ioport range 0x1006-0x1007 has been reserved [ 8.239738] system 00:0a: ioport range 0x100a-0x1059 could not be reserved [ 8.239741] system 00:0a: ioport range 0x1060-0x107f has been reserved [ 8.239744] system 00:0a: ioport range 0x1080-0x10bf has been reserved [ 8.239747] system 00:0a: ioport range 0x10c0-0x10df has been reserved [ 8.239750] system 00:0a: ioport range 0x1010-0x102f has been reserved [ 8.239753] system 00:0a: ioport range 0x809-0x809 has been reserved [ 8.239760] system 00:0b: iomem range 0x0-0x9efff could not be reserved [ 8.239763] system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved [ 8.239766] system 00:0b: iomem range 0xc0000-0xcffff has been reserved [ 8.239769] system 00:0b: iomem range 0xe0000-0xfffff has been reserved [ 8.239773] system 00:0b: iomem range 0x100000-0x3f6923ff could not be reserved [ 8.239776] system 00:0b: iomem range 0x3f692400-0x3f6fffff could not be reserved [ 8.239779] system 00:0b: iomem range 0x3f700000-0x3f7fffff could not be reserved [ 8.239783] system 00:0b: iomem range 0x3f700000-0x3fefffff could not be reserved [ 8.239786] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved [ 8.239790] system 00:0b: iomem range 0xffa00000-0xffafffff has been reserved [ 8.239793] system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 8.239796] system 00:0b: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 8.240454] PCI: Bridge: 0000:00:1c.0 [ 8.240456] IO window: disabled. [ 8.240461] MEM window: disabled. [ 8.240465] PREFETCH window: disabled. [ 8.240471] PCI: Bridge: 0000:00:1c.1 [ 8.240472] IO window: disabled. [ 8.240477] MEM window: fe800000-fe8fffff [ 8.240482] PREFETCH window: disabled. [ 8.240486] PCI: Bridge: 0000:00:1c.3 [ 8.240490] IO window: d000-dfff [ 8.240495] MEM window: fe600000-fe7fffff [ 8.240499] PREFETCH window: f0000000-f01fffff [ 8.240504] PCI: Bridge: 0000:00:1c.5 [ 8.240506] IO window: disabled. [ 8.240511] MEM window: fe500000-fe5fffff [ 8.240515] PREFETCH window: disabled. [ 8.240520] PCI: Bridge: 0000:00:1e.0 [ 8.240522] IO window: disabled. [ 8.240527] MEM window: fe400000-fe4fffff [ 8.240531] PREFETCH window: disabled. [ 8.240558] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 8.240565] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 8.240586] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 8.240592] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 8.240612] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 8.240618] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 8.240645] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 8.240651] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 8.240662] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 8.240675] NET: Registered protocol family 2 [ 8.251754] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 8.252336] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 8.253440] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 8.254031] TCP: Hash tables configured (established 131072 bind 65536) [ 8.254034] TCP reno registered [ 8.256838] checking if image is initramfs... it is [ 14.259435] Freeing initrd memory: 44143k freed [ 14.287249] Simple Boot Flag at 0x79 set to 0x1 [ 14.288192] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk> [ 14.288642] audit: initializing netlink socket (disabled) [ 14.288657] audit(1200343337.400:1): initialized [ 14.288879] Total HugeTLB memory allocated, 0 [ 14.291640] VFS: Disk quotas dquot_6.5.1 [ 14.291734] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 14.292071] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 14.292075] io scheduler noop registered [ 14.292077] io scheduler anticipatory registered [ 14.292079] io scheduler deadline registered [ 14.292504] io scheduler cfq registered (default) [ 14.292517] Boot video device is 0000:00:02.0 [ 14.295231] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 14.295282] assign_interrupt_mode Found MSI capability [ 14.295322] Allocate Port Service[0000:00:1c.0:pcie00] [ 14.295372] Allocate Port Service[0000:00:1c.0:pcie02] [ 14.295418] Allocate Port Service[0000:00:1c.0:pcie03] [ 14.295519] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 14.295568] assign_interrupt_mode Found MSI capability [ 14.295606] Allocate Port Service[0000:00:1c.1:pcie00] [ 14.295654] Allocate Port Service[0000:00:1c.1:pcie02] [ 14.295698] Allocate Port Service[0000:00:1c.1:pcie03] [ 14.295802] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 14.295851] assign_interrupt_mode Found MSI capability [ 14.295888] Allocate Port Service[0000:00:1c.3:pcie00] [ 14.296005] Allocate Port Service[0000:00:1c.3:pcie02] [ 14.296051] Allocate Port Service[0000:00:1c.3:pcie03] [ 14.296157] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 14.296206] assign_interrupt_mode Found MSI capability [ 14.296244] Allocate Port Service[0000:00:1c.5:pcie00] [ 14.296289] Allocate Port Service[0000:00:1c.5:pcie02] [ 14.296333] Allocate Port Service[0000:00:1c.5:pcie03] [ 14.296639] ALI M7101 PMU not found. [ 14.325873] Real Time Clock Driver v1.12ac [ 14.326125] hpet_resources: 0xfed00000 is busy [ 14.326223] Linux agpgart interface v0.102 [ 14.326226] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 14.326228] Hangcheck: Using get_cycles(). [ 14.326233] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 14.327652] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 14.327730] input: Macintosh mouse button emulation as /class/input/input0 [ 14.327853] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 14.331229] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 14.331236] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 14.335221] mice: PS/2 mouse device common for all mice [ 14.335269] EDAC MC: Ver: 2.1.0 Jan 14 2008 [ 14.335510] cpuidle: using governor ladder [ 14.335512] cpuidle: using governor menu [ 14.335599] TCP cubic registered [ 14.335675] NET: Registered protocol family 1 [ 14.335886] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 14.335896] Freeing unused kernel memory: 340k freed [ 14.336849] Write protecting the kernel read-only data: 1036k [ 14.338400] input: AT Translated Set 2 keyboard as /class/input/input1 [ 14.338435] busybox used greatest stack depth: 5904 bytes left [ 14.346229] exe used greatest stack depth: 5768 bytes left [ 14.387964] all_generic_ide used greatest stack depth: 5632 bytes left [ 15.572462] fuse init (API version 7.9) [ 15.585331] mount used greatest stack depth: 5592 bytes left [ 15.596515] ACPI: SSDT 3F6931B8, 01C0 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 15.596789] ACPI: SSDT 3F692B4E, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 15.597555] Monitor-Mwait will be used to enter C-1 state [ 15.597559] Monitor-Mwait will be used to enter C-2 state [ 15.597561] Monitor-Mwait will be used to enter C-3 state [ 15.597735] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 15.597740] ACPI: Processor [CPU0] (supports 8 throttling states) [ 15.598035] ACPI: SSDT 3F693378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 15.598282] ACPI: SSDT 3F693133, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 15.599213] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 15.599220] ACPI: Processor [CPU1] (supports 8 throttling states) [ 15.606804] ACPI: Thermal Zone [THM] (47 C) [ 15.606947] modprobe used greatest stack depth: 5048 bytes left [ 16.199587] usbcore: registered new interface driver usbfs [ 16.199622] usbcore: registered new interface driver hub [ 16.199657] usbcore: registered new device driver usb [ 16.201480] USB Universal Host Controller Interface driver v3.0 [ 16.201546] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 16.201558] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 16.201562] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 16.201764] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 16.201801] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 16.201963] usb usb1: configuration #1 chosen from 1 choice [ 16.201993] hub 1-0:1.0: USB hub found [ 16.202000] hub 1-0:1.0: 2 ports detected [ 16.302497] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 16.302511] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 16.302515] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 16.302544] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 16.302578] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 16.302705] usb usb2: configuration #1 chosen from 1 choice [ 16.302735] hub 2-0:1.0: USB hub found [ 16.302742] hub 2-0:1.0: 2 ports detected [ 16.380439] SCSI subsystem initialized [ 16.402323] libata version 3.00 loaded. [ 16.403452] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 16.403464] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 16.403468] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 16.403496] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 16.403527] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 16.403659] usb usb3: configuration #1 chosen from 1 choice [ 16.403688] hub 3-0:1.0: USB hub found [ 16.403695] hub 3-0:1.0: 2 ports detected [ 16.479835] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 16.479853] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 16.479864] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 16.479893] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 16.479922] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 16.480050] usb usb4: configuration #1 chosen from 1 choice [ 16.480080] hub 4-0:1.0: USB hub found [ 16.480087] hub 4-0:1.0: 2 ports detected [ 16.488983] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 16.488997] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 16.489002] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 16.489041] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 16.489072] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 16.489198] usb usb5: configuration #1 chosen from 1 choice [ 16.489227] hub 5-0:1.0: USB hub found [ 16.489234] hub 5-0:1.0: 2 ports detected [ 16.498999] tg3.c:v3.86 (November 9, 2007) [ 16.499047] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 16.499064] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 16.554218] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1c:23:f7:5e:f5 [ 16.554227] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0] [ 16.554230] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 16.554299] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 16.554694] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 16.555294] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 16.555300] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 16.555362] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 16.559287] ehci_hcd 0000:00:1a.7: debug port 1 [ 16.559293] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 16.559300] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 16.568846] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 16.568967] usb usb6: configuration #1 chosen from 1 choice [ 16.568999] hub 6-0:1.0: USB hub found [ 16.569006] hub 6-0:1.0: 4 ports detected [ 16.607436] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fe4ff800-fe4fffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 16.616089] Clocksource tsc unstable (delta = -271064637 ns) [ 16.617234] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 16.617998] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 16.618005] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 16.618074] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 16.622001] ehci_hcd 0000:00:1d.7: debug port 1 [ 16.622007] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 16.622014] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 16.627579] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 16.627754] usb usb7: configuration #1 chosen from 1 choice [ 16.627797] hub 7-0:1.0: USB hub found [ 16.627812] hub 7-0:1.0: 6 ports detected [ 16.635794] ahci 0000:00:1f.2: version 3.0 [ 16.635826] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 16.636465] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x5) don't match, using nr_ports [ 16.636470] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7 [ 16.717633] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 16.717641] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 16.717649] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 16.718651] scsi0 : ahci [ 16.718740] scsi1 : ahci [ 16.718812] scsi2 : ahci [ 16.719162] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 507 [ 16.719167] ata2: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb980 irq 507 [ 16.719170] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 507 [ 16.725979] ieee1394: Host added: ID:BUS[0-00:1023] GUID[344fc000245b6d81] [ 16.758056] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 17.044354] ata1.00: ATA-8: WDC WD1200BEVS-75UST0, 01.01A01, max UDMA/133 [ 17.044361] ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 31/32) [ 17.045284] ata1.00: configured for UDMA/133 [ 17.063864] ata2: SATA link down (SStatus 0 SControl 0) [ 17.081003] ata3: SATA link down (SStatus 0 SControl 300) [ 17.081268] scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-7 01.0 PQ: 0 ANSI: 5 [ 17.081855] ata_piix 0000:00:1f.1: version 2.12 [ 17.081877] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 17.081921] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 17.081992] scsi3 : ata_piix [ 17.082130] modprobe used greatest stack depth: 4816 bytes left [ 17.082209] scsi4 : ata_piix [ 17.083092] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 17.083096] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 17.090576] Driver 'sd' needs updating - please use bus_type methods [ 17.092278] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 17.092302] sd 0:0:0:0: [sda] Write Protect is off [ 17.092307] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.092340] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.092402] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 17.092415] sd 0:0:0:0: [sda] Write Protect is off [ 17.092418] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 17.092439] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.092443] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 17.170977] sd 0:0:0:0: [sda] Attached SCSI disk [ 17.171118] modprobe used greatest stack depth: 4656 bytes left [ 17.175900] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 17.422398] ata4.00: ATAPI: PBDS DVD+/-RW DS-8W1P, BD1B, max UDMA/33 [ 17.507820] kjournald starting. Commit interval 5 seconds [ 17.507849] EXT3-fs: mounted filesystem with ordered data mode. [ 17.614174] ata4.00: configured for UDMA/33 [ 17.614275] ata5: port disabled. ignoring. [ 17.616879] scsi 3:0:0:0: CD-ROM PBDS DVD+-RW DS-8W1P BD1B PQ: 0 ANSI: 5 [ 17.617018] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 18.152323] runlevel used greatest stack depth: 4408 bytes left [ 18.212935] grep used greatest stack depth: 3904 bytes left [ 27.243168] agpgart: Detected an Intel 965GM Chipset. [ 27.244342] agpgart: Detected 7676K stolen memory. [ 27.257945] agpgart: AGP aperture is 256M @ 0xe0000000 [ 27.279262] ACPI: AC Adapter [AC] (on-line) [ 27.299264] input: Lid Switch as /class/input/input2 [ 27.302274] ACPI: Lid Switch [LID] [ 27.302334] input: Power Button (CM) as /class/input/input3 [ 27.313707] ACPI: Power Button (CM) [PBTN] [ 27.313766] input: Sleep Button (CM) as /class/input/input4 [ 27.325713] ACPI: Sleep Button (CM) [SBTN] [ 27.355967] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 27.417056] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 27.508022] ACPI: Battery Slot [BAT0] (battery present) [ 27.529669] input: Video Bus as /class/input/input5 [ 27.546644] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 27.558185] input: Video Bus as /class/input/input6 [ 27.569623] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 27.569814] input: Video Bus as /class/input/input7 [ 27.576603] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 28.152381] ricoh-mmc: Ricoh MMC Controller disabling driver [ 28.152385] ricoh-mmc: Copyright(c) Philip Langdale [ 28.152439] ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 12) [ 28.152451] ricoh-mmc: Controller is now disabled. [ 28.170979] iTCO_vendor_support: vendor-support=0 [ 28.184475] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 28.184601] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 28.184645] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 28.247165] sdhci: Secure Digital Host Controller Interface driver [ 28.247170] sdhci: Copyright(c) Pierre Ossman [ 28.247223] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22) [ 28.247246] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18 [ 28.247936] mmc0: SDHCI at 0xfe4ff400 irq 18 DMA [ 28.611551] input: PC Speaker as /class/input/input8 [ 28.840220] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17kds [ 28.840225] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 28.840386] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 28.840402] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 28.841019] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 28.966924] input: PS/2 Mouse as /class/input/input9 [ 29.021020] input: AlpsPS/2 ALPS GlidePoint as /class/input/input10 [ 29.042080] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 29.042862] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 29.142172] Driver 'sr' needs updating - please use bus_type methods [ 29.158827] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 29.158835] Uniform CD-ROM driver Revision: 3.20 [ 29.158939] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 29.513607] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 29.514264] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 29.538784] route used greatest stack depth: 3752 bytes left [ 30.217457] lp: driver loaded but no devices found [ 30.539855] NET: Registered protocol family 10 [ 30.540162] lo: Disabled Privacy Extensions [ 30.541214] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 30.648774] Adding 1293192k swap on /dev/sda5. Priority:-1 extents:1 across:1293192k [ 30.995342] eth1: Initial auth_alg=0 [ 30.995351] eth1: authenticate with AP 00:11:50:fa:d4:ba [ 30.997159] eth1: RX authentication from 00:11:50:fa:d4:ba (alg=0 transaction=2 status=0) [ 30.997165] eth1: authenticated [ 30.997169] eth1: associate with AP 00:11:50:fa:d4:ba [ 30.999817] eth1: RX AssocResp from 00:11:50:fa:d4:ba (capab=0x411 status=0 aid=2) [ 30.999821] eth1: associated [ 30.999827] eth1: switched to short barker preamble (BSSID=00:11:50:fa:d4:ba) [ 30.999866] eth1: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0 [ 30.999872] eth1: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0 [ 30.999877] eth1: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30 [ 30.999882] eth1: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15 [ 31.003501] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 31.265974] EXT3 FS on sda6, internal journal [ 31.542561] device-mapper: uevent: version 1.0.3 [ 31.542597] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 31.747747] WARNING: at net/mac80211/rx.c:1486 __ieee80211_rx() [ 31.747754] Pid: 4569, comm: tput Not tainted 2.6.24-rc7-git #1 [ 31.747757] [ 31.747757] Call Trace: [ 31.747759] <IRQ> [<ffffffff88236309>] :mac80211:__ieee80211_rx+0xc99/0xd60 [ 31.747808] [<ffffffff80473a26>] _spin_unlock_irqrestore+0x16/0x40 [ 31.747820] [<ffffffff8827530a>] :iwl3945:iwl_rx_queue_restock+0xca/0x170 [ 31.747826] [<ffffffff80473a26>] _spin_unlock_irqrestore+0x16/0x40 [ 31.747840] [<ffffffff88227228>] :mac80211:ieee80211_tasklet_handler+0xb8/0x120 [ 31.747851] [<ffffffff802466f1>] tasklet_action+0x51/0xc0 [ 31.747854] [<ffffffff80473964>] _spin_unlock+0x14/0x40 [ 31.747859] [<ffffffff802465f4>] __do_softirq+0x64/0xe0 [ 31.747866] [<ffffffff8020d57c>] call_softirq+0x1c/0x30 [ 31.747870] [<ffffffff8020ef0d>] do_softirq+0x3d/0x90 [ 31.747875] [<ffffffff80246508>] irq_exit+0x88/0xa0 [ 31.747878] [<ffffffff8020f025>] do_IRQ+0xc5/0x1b0 [ 31.747884] [<ffffffff8020c8d1>] ret_from_intr+0x0/0xa [ 31.747894] <EOI> [ 32.092513] kjournald starting. Commit interval 5 seconds [ 32.092875] EXT3 FS on sda3, internal journal [ 32.092882] EXT3-fs: mounted filesystem with ordered data mode. [ 32.889421] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 32.957043] No dock devices found. [ 34.855255] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 35.448284] ppdev: user-space parallel port driver [ 38.593563] [drm] Initialized drm 1.1.0 20060810 [ 38.629573] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 38.629655] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 39.729869] eth1: no IPv6 routers present [ 40.424673] cupsd used greatest stack depth: 3664 bytes left [ 45.533867] displayconfig-h used greatest stack depth: 3632 bytes left [ 48.531961] NET: Registered protocol family 17 [ 48.784812] device eth0 entered promiscuous mode [ 48.784981] audit(1200343376.214:2): dev=eth0 prom=256 old_prom=0 auid=4294967295 [ 50.763995] Bluetooth: Core ver 2.11 [ 50.764126] NET: Registered protocol family 31 [ 50.764128] Bluetooth: HCI device and connection manager initialized [ 50.764134] Bluetooth: HCI socket layer initialized [ 50.880241] Bluetooth: L2CAP ver 2.9 [ 50.880247] Bluetooth: L2CAP socket layer initialized [ 51.171853] Bluetooth: RFCOMM socket layer initialized [ 51.172039] Bluetooth: RFCOMM TTY layer initialized [ 51.172239] Bluetooth: RFCOMM ver 1.8 [ 202.023649] pidgin used greatest stack depth: 3592 bytes left