| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080122193719.GA3791@elf.ucw.cz>
Date: Tue, 22 Jan 2008 20:37:19 +0100
From: Pavel Machek <pavel@....cz>
To: "Rafael J. Wysocki" <rjw@...k.pl>,
kernel list <linux-kernel@...r.kernel.org>, mingo@...hat.com,
tglx@...utronix.de, hpa@...or.com
Subject: factor out common s2ram wakeup code
It seems to compile 32/64bit, and work 32bit... Now, video code should
be probably shared with kernel/boot; but that was rewritten to C and
I'm not sure if I know enough about linkers... basically the C code
should replace mode_set() and friends. Peter, can you help?
Pavel
---
Factor out common real-mode part of wakeup_{32,64}.S.
Signed-off-by: Pavel Machek <pavel@...e.cz>
---
commit 2fac1886274433c64e76611e6b1ba2318c5914a4
tree 2d6bdc7c2eda9845b57e1d7128b187df1b1fd2c9
parent 7a9546efcc4d90040a52c003eb9a303200c41f86
author Pavel <pavel@....ucw.cz> Tue, 22 Jan 2008 20:34:03 +0100
committer Pavel <pavel@....ucw.cz> Tue, 22 Jan 2008 20:34:03 +0100
arch/x86/kernel/acpi/wakeup.S | 111 ++++++++++++++++++++++++++++++++++
arch/x86/kernel/acpi/wakeup_32.S | 118 +-----------------------------------
arch/x86/kernel/acpi/wakeup_64.S | 125 +-------------------------------------
3 files changed, 116 insertions(+), 238 deletions(-)
diff --git a/arch/x86/kernel/acpi/wakeup.S b/arch/x86/kernel/acpi/wakeup.S
new file mode 100644
index 0000000..38205c8
--- /dev/null
+++ b/arch/x86/kernel/acpi/wakeup.S
@@ -0,0 +1,111 @@
+# Copyright 2003, 2008 Pavel Machek <pavel@...e.cz>, distribute under GPLv2
+
+#define BEEP \
+ inb $97, %al; \
+ outb %al, $0x80; \
+ movb $3, %al; \
+ outb %al, $97; \
+ outb %al, $0x80; \
+ movb $-74, %al; \
+ outb %al, $67; \
+ outb %al, $0x80; \
+ movb $-119, %al; \
+ outb %al, $66; \
+ outb %al, $0x80; \
+ movb $15, %al; \
+ outb %al, $66;
+
+ALIGN
+ .align 4096
+ENTRY(wakeup_start)
+wakeup_code:
+ wakeup_code_start = .
+ .code16
+
+ cli
+ cld
+
+ # setup data segment
+ movw %cs, %ax
+ movw %ax, %ds # Make ds:0 point to wakeup_start
+ movw %ax, %ss
+
+ testl $4, realmode_flags - wakeup_code
+ jz 1f
+ BEEP
+1:
+ mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board
+
+ pushl $0 # Kill any dangerous flags
+ popfl
+
+
+ movl real_magic - wakeup_code, %eax
+ cmpl $0x12345678, %eax
+ jne bogus_real_magic
+
+ testl $1, realmode_flags - wakeup_code
+ jz 1f
+ lcall $0xc000,$3
+ movw %cs, %ax
+ movw %ax, %ds # Bios might have played with that
+ movw %ax, %ss
+1:
+
+ testl $2, realmode_flags - wakeup_code
+ jz mode_done
+ mov video_mode - wakeup_code, %ax
+ call mode_set
+ jmp mode_done
+
+/* This code uses an extended set of video mode numbers. These include:
+ * Aliases for standard modes
+ * NORMAL_VGA (-1)
+ * EXTENDED_VGA (-2)
+ * ASK_VGA (-3)
+ * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
+ * of compatibility when extending the table. These are between 0x00 and 0xff.
+ */
+#define VIDEO_FIRST_MENU 0x0000
+
+/* Standard BIOS video modes (BIOS number + 0x0100) */
+#define VIDEO_FIRST_BIOS 0x0100
+
+/* VESA BIOS video modes (VESA number + 0x0200) */
+#define VIDEO_FIRST_VESA 0x0200
+
+/* Video7 special modes (BIOS number + 0x0900) */
+#define VIDEO_FIRST_V7 0x0900
+
+# Setting of user mode (AX=mode ID) => CF=success
+
+# For now, we only handle VESA modes (0x0200..0x03ff). To handle other
+# modes, we should probably compile in the video code from the boot
+# directory.
+.code16
+mode_set:
+ movw %ax, %bx
+ subb $VIDEO_FIRST_VESA>>8, %bh
+ cmpb $2, %bh
+ jb check_vesa
+
+setbad:
+ clc
+ ret
+
+check_vesa:
+ orw $0x4000, %bx # Use linear frame buffer
+ movw $0x4f02, %ax # VESA BIOS mode set call
+ int $0x10
+ cmpw $0x004f, %ax # AL=4f if implemented
+ jnz setbad # AH=0 if OK
+
+ stc
+ ret
+
+bogus_real_magic:
+ jmp bogus_real_magic
+
+real_magic: .quad 0
+video_mode: .quad 0
+realmode_flags: .quad 0
diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
index 1e931aa..9b26909 100644
--- a/arch/x86/kernel/acpi/wakeup_32.S
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -3,73 +3,11 @@ #include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/page.h>
-#
-# wakeup_code runs in real mode, and at unknown address (determined at run-time).
-# Therefore it must only use relative jumps/calls.
-#
-# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
-#
-# If physical address of wakeup_code is 0x12345, BIOS should call us with
-# cs = 0x1234, eip = 0x05
-#
-
-#define BEEP \
- inb $97, %al; \
- outb %al, $0x80; \
- movb $3, %al; \
- outb %al, $97; \
- outb %al, $0x80; \
- movb $-74, %al; \
- outb %al, $67; \
- outb %al, $0x80; \
- movb $-119, %al; \
- outb %al, $66; \
- outb %al, $0x80; \
- movb $15, %al; \
- outb %al, $66;
-
-ALIGN
- .align 4096
-ENTRY(wakeup_start)
-wakeup_code:
- wakeup_code_start = .
- .code16
-
- cli
- cld
-
- # setup data segment
- movw %cs, %ax
- movw %ax, %ds # Make ds:0 point to wakeup_start
- movw %ax, %ss
-
- testl $4, realmode_flags - wakeup_code
- jz 1f
- BEEP
-1:
- mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board
+# Copyright 2003, 2008 Pavel Machek <pavel@...e.cz>, distribute under GPLv2
- pushl $0 # Kill any dangerous flags
- popfl
-
- movl real_magic - wakeup_code, %eax
- cmpl $0x12345678, %eax
- jne bogus_real_magic
-
- testl $1, realmode_flags - wakeup_code
- jz 1f
- lcall $0xc000,$3
- movw %cs, %ax
- movw %ax, %ds # Bios might have played with that
- movw %ax, %ss
-1:
-
- testl $2, realmode_flags - wakeup_code
- jz 1f
- mov video_mode - wakeup_code, %ax
- call mode_set
-1:
+#include "wakeup.S"
+mode_done:
# set up page table
movl $swsusp_pg_dir-__PAGE_OFFSET, %eax
movl %eax, %cr3
@@ -109,60 +47,10 @@ real_save_gdt: .word 0
real_save_cr0: .long 0
real_save_cr3: .long 0
real_save_cr4: .long 0
-real_magic: .long 0
-video_mode: .long 0
-realmode_flags: .long 0
real_efer_save_restore: .long 0
real_save_efer_edx: .long 0
real_save_efer_eax: .long 0
-bogus_real_magic:
- jmp bogus_real_magic
-
-/* This code uses an extended set of video mode numbers. These include:
- * Aliases for standard modes
- * NORMAL_VGA (-1)
- * EXTENDED_VGA (-2)
- * ASK_VGA (-3)
- * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
- * of compatibility when extending the table. These are between 0x00 and 0xff.
- */
-#define VIDEO_FIRST_MENU 0x0000
-
-/* Standard BIOS video modes (BIOS number + 0x0100) */
-#define VIDEO_FIRST_BIOS 0x0100
-
-/* VESA BIOS video modes (VESA number + 0x0200) */
-#define VIDEO_FIRST_VESA 0x0200
-
-/* Video7 special modes (BIOS number + 0x0900) */
-#define VIDEO_FIRST_V7 0x0900
-
-# Setting of user mode (AX=mode ID) => CF=success
-
-# For now, we only handle VESA modes (0x0200..0x03ff). To handle other
-# modes, we should probably compile in the video code from the boot
-# directory.
-mode_set:
- movw %ax, %bx
- subb $VIDEO_FIRST_VESA>>8, %bh
- cmpb $2, %bh
- jb check_vesa
-
-setbad:
- clc
- ret
-
-check_vesa:
- orw $0x4000, %bx # Use linear frame buffer
- movw $0x4f02, %ax # VESA BIOS mode set call
- int $0x10
- cmpw $0x004f, %ax # AL=4f if implemented
- jnz setbad # AH=0 if OK
-
- stc
- ret
-
.code32
ALIGN
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
index 5ed3bc5..b02d97f 100644
--- a/arch/x86/kernel/acpi/wakeup_64.S
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -7,78 +7,10 @@ #include <asm/msr.h>
#include <asm/asm-offsets.h>
# Copyright 2003 Pavel Machek <pavel@...e.cz>, distribute under GPLv2
-#
-# wakeup_code runs in real mode, and at unknown address (determined at run-time).
-# Therefore it must only use relative jumps/calls.
-#
-# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
-#
-# If physical address of wakeup_code is 0x12345, BIOS should call us with
-# cs = 0x1234, eip = 0x05
-#
-
-#define BEEP \
- inb $97, %al; \
- outb %al, $0x80; \
- movb $3, %al; \
- outb %al, $97; \
- outb %al, $0x80; \
- movb $-74, %al; \
- outb %al, $67; \
- outb %al, $0x80; \
- movb $-119, %al; \
- outb %al, $66; \
- outb %al, $0x80; \
- movb $15, %al; \
- outb %al, $66;
-
-
-ALIGN
- .align 16
-ENTRY(wakeup_start)
-wakeup_code:
- wakeup_code_start = .
- .code16
-
-# Running in *copy* of this code, somewhere in low 1MB.
-
- cli
- cld
- # setup data segment
- movw %cs, %ax
- movw %ax, %ds # Make ds:0 point to wakeup_start
- movw %ax, %ss
-
- # Data segment must be set up before we can see whether to beep.
- testl $4, realmode_flags - wakeup_code
- jz 1f
- BEEP
-1:
-
- # Private stack is needed for ASUS board
- mov $(wakeup_stack - wakeup_code), %sp
-
- pushl $0 # Kill any dangerous flags
- popfl
- movl real_magic - wakeup_code, %eax
- cmpl $0x12345678, %eax
- jne bogus_real_magic
-
- testl $1, realmode_flags - wakeup_code
- jz 1f
- lcall $0xc000,$3
- movw %cs, %ax
- movw %ax, %ds # Bios might have played with that
- movw %ax, %ss
-1:
-
- testl $2, realmode_flags - wakeup_code
- jz 1f
- mov video_mode - wakeup_code, %ax
- call mode_set
-1:
+#include "wakeup.S"
+mode_done:
mov %ds, %ax # Find 32bit wakeup_code addr
movzx %ax, %esi # (Convert %ds:gdt to a liner ptr)
shll $4, %esi
@@ -227,64 +159,11 @@ gdt_48a:
.word 0x800 # gdt limit=2048,
# 256 GDT entries
.long gdta - wakeup_code # gdt base (relocated in later)
-
-real_magic: .quad 0
-video_mode: .quad 0
-realmode_flags: .quad 0
-
-.code16
-bogus_real_magic:
- jmp bogus_real_magic
.code64
bogus_64_magic:
jmp bogus_64_magic
-/* This code uses an extended set of video mode numbers. These include:
- * Aliases for standard modes
- * NORMAL_VGA (-1)
- * EXTENDED_VGA (-2)
- * ASK_VGA (-3)
- * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
- * of compatibility when extending the table. These are between 0x00 and 0xff.
- */
-#define VIDEO_FIRST_MENU 0x0000
-
-/* Standard BIOS video modes (BIOS number + 0x0100) */
-#define VIDEO_FIRST_BIOS 0x0100
-
-/* VESA BIOS video modes (VESA number + 0x0200) */
-#define VIDEO_FIRST_VESA 0x0200
-
-/* Video7 special modes (BIOS number + 0x0900) */
-#define VIDEO_FIRST_V7 0x0900
-
-# Setting of user mode (AX=mode ID) => CF=success
-
-# For now, we only handle VESA modes (0x0200..0x03ff). To handle other
-# modes, we should probably compile in the video code from the boot
-# directory.
-.code16
-mode_set:
- movw %ax, %bx
- subb $VIDEO_FIRST_VESA>>8, %bh
- cmpb $2, %bh
- jb check_vesa
-
-setbad:
- clc
- ret
-
-check_vesa:
- orw $0x4000, %bx # Use linear frame buffer
- movw $0x4f02, %ax # VESA BIOS mode set call
- int $0x10
- cmpw $0x004f, %ax # AL=4f if implemented
- jnz setbad # AH=0 if OK
-
- stc
- ret
-
wakeup_stack_begin: # Stack grows down
.org 0xff0
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists