Linux version 2.6.23-default (root@crystal) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #4 SMP Tue Jan 22 14:11:12 EET 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. found SMP MP-table at 000f4f00 Entering add_active_range(0, 0, 131056) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 131056 HighMem 131056 -> 131056 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 131056 On node 0 totalpages: 131056 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 991 pages used for memmap Normal zone: 125969 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap DMI 2.2 present. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 15:2 APIC version 17 WARNING: maxcpus limit of 0 reached. Processor ignored. I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs SMP mptable: no processors registered! BIOS bug, MP table errors detected!... ... disabling SMP support. (tell your hw vendor) Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Built 1 zonelists in Zone order. Total pages: 130033 Kernel command line: auto BOOT_IMAGE=Linux ro root=302 selinux=0 resume=/dev/hda1 splash=silent showopts apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3 Found and enabled local APIC! mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (0140d000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1996.682 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 514096k/524224k available (2053k kernel code, 9620k reserved, 804k data, 256k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) .init : 0xc03d2000 - 0xc0412000 ( 256 kB) .data : 0xc030178f - 0xc03ca87c ( 804 kB) .text : 0xc0100000 - 0xc030178f (2053 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 3997.35 BogoMIPS (lpj=7994704) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 128K CPU: Hyper-Threading is disabled CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed CPU0: Intel(R) Celeron(R) CPU 2.00GHz stepping 09 SMP motherboard not detected. Brought up 1 CPUs Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0 PCI: setting IRQ 11 as level-triggered PCI: Found IRQ 11 for device 0000:00:1f.1 PCI: Sharing IRQ 11 with 0000:00:1f.2 PCI: Sharing IRQ 11 with 0000:02:06.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: f8000000-f9ffffff PREFETCH window: f0000000-f7ffffff PCI: Bridge: 0000:00:1e.0 IO window: 9000-afff MEM window: fa000000-fbffffff PREFETCH window: 30000000-300fffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 Time: tsc clocksource has been installed. IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 196608 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1562k freed Machine check exception polling timer started. audit: initializing netlink socket (disabled) audit(1201038661.496:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 Real Time Clock Driver v1.12ac Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. PCI: setting IRQ 10 as level-triggered PCI: Found IRQ 10 for device 0000:02:07.0 e1000: 0000:02:07.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:81:5d:e4 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) 8139cp 0000:02:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp 0000:02:0a.0: Try the "8139too" driver instead. PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 input: PC Speaker as /class/input/input1 TCP cubic registered NET: Registered protocol family 1 Using IPI Shortcut mode Freeing unused kernel memory: 256k freed Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem initialized ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Found IRQ 11 for device 0000:00:1f.1 PCI: Sharing IRQ 11 with 0000:00:1f.2 PCI: Sharing IRQ 11 with 0000:02:06.0 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: QUANTUM FIREBALLP AS40.0, ATA DISK drive hda: selected mode 0x45 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 Probing IDE interface ide1... hdc: WDC WD5000AAJB-00YRA0, ATA DISK drive hdc: selected mode 0x45 ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 512KiB hdc: 976773168 sectors (500107 MB) w/8192KiB Cache, CHS=60801/255/63, UDMA(100) hdc: cache flushes supported hdc: hdc1 libata version 2.21 loaded. ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] PCI: Found IRQ 11 for device 0000:00:1f.2 PCI: Sharing IRQ 11 with 0000:00:1f.1 PCI: Sharing IRQ 11 with 0000:02:06.0 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x0001c000 ctl 0x0001c402 bmdma 0x0001d000 irq 11 ata2: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001cc02 bmdma 0x0001d008 irq 11 ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 thermal: Unknown symbol acpi_processor_set_thermal_limit kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. md: md0 stopped. md: Autodetecting RAID arrays. md: autorun ... md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: adding hdc1 ... md: created md0 md: bind md: bind md: bind md: running: xor: automatically using best checksumming function: pIII_sse pIII_sse : 2545.000 MB/sec xor: using function: pIII_sse (2545.000 MB/sec) async_tx: api initialized (sync-only) raid6: int32x1 520 MB/s raid6: int32x2 518 MB/s raid6: int32x4 510 MB/s raid6: int32x8 369 MB/s raid6: mmxx1 1528 MB/s raid6: mmxx2 1685 MB/s raid6: sse1x1 874 MB/s raid6: sse1x2 1781 MB/s raid6: sse2x1 1867 MB/s raid6: sse2x2 2179 MB/s raid6: using algorithm sse2x2 (2179 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: reshape will continue raid5: device sdb1 operational as raid disk 0 raid5: device sda1 operational as raid disk 2 raid5: device hdc1 operational as raid disk 1 raid5: not enough operational devices for md0 (2/5 failed) RAID5 conf printout: --- rd:5 wd:3 disk 0, o:1, dev:sdb1 disk 1, o:1, dev:hdc1 disk 2, o:1, dev:sda1 raid5: failed to run raid set md0 md: pers->run() failed ... md: do_md_run() returned -5 md: md0 stopped. md: unbind md: export_rdev(sdb1) md: unbind md: export_rdev(sda1) md: unbind md: export_rdev(hdc1) md: ... autorun DONE. Adding 530104k swap on /dev/hda1. Priority:-1 extents:1 across:530104k device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com net eth2: device_rename: sysfs_create_symlink failed (-17) e1000: eth2: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth2: no IPv6 routers present sata_sil 0000:02:06.0: version 2.3 PCI: Found IRQ 11 for device 0000:02:06.0 PCI: Sharing IRQ 11 with 0000:00:1f.1 PCI: Sharing IRQ 11 with 0000:00:1f.2 scsi2 : sata_sil scsi3 : sata_sil ata3: SATA max UDMA/100 cmd 0xe087c080 ctl 0xe087c08a bmdma 0xe087c000 irq 11 ata4: SATA max UDMA/100 cmd 0xe087c0c0 ctl 0xe087c0ca bmdma 0xe087c008 irq 11 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7 ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/100 ata4: SATA link down (SStatus 0 SControl 310) scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 2:0:0:0: [sdc] Attached SCSI disk sd 2:0:0:0: Attached scsi generic sg2 type 0 md: md0 stopped. md: bind md: bind md: bind md: bind raid5: reshape will continue raid5: device sdb1 operational as raid disk 0 raid5: device sdc1 operational as raid disk 4 raid5: device sda1 operational as raid disk 2 raid5: device hdc1 operational as raid disk 1 raid5: allocated 5252kB for md0 raid5: raid level 5 set md0 active with 4 out of 5 devices, algorithm 2 RAID5 conf printout: --- rd:5 wd:4 disk 0, o:1, dev:sdb1 disk 1, o:1, dev:hdc1 disk 2, o:1, dev:sda1 disk 4, o:1, dev:sdc1 ...ok start reshape thread md: reshape of RAID array md0 md: minimum _guaranteed_ speed: 500000 KB/sec/disk. md: using maximum available idle IO bandwidth (but not more than 1000000 KB/sec) for reshape. md: using 128k window, over a total of 488383936 blocks. ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:5c:03/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:80:3f:5e:03/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata3.00: cmd 35/00:80:bf:75:03/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 40/00:80:3f:5e:03/00:00:00:00:00/e0 Emask 0x4 (timeout) ata3: port is slow to respond, please be patient (Status 0xd1) ata3: device not ready (errno=-16), forcing hardreset ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:8d:03/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:60:df:8e:03/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata3.00: cmd 35/00:80:bf:9d:03/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 40/00:60:df:8e:03/00:00:00:00:00/e0 Emask 0x4 (timeout) ata3: port is slow to respond, please be patient (Status 0xd1) ata3: device not ready (errno=-16), forcing hardreset ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:00:3f:ca:03/00:02:00:00:00/e0 tag 0 cdb 0x0 data 262144 out res 51/04:a0:9f:ca:03/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd ca/00:00:3f:d2:03/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 out res 51/04:b0:8f:d2:03/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:00:c7:d9:03/00:02:00:00:00/e0 tag 0 cdb 0x0 data 262144 out res 51/04:30:97:da:03/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:dd:03/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:60:df:dd:03/00:02:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:00:3f:f2:03/00:02:00:00:00/e0 tag 0 cdb 0x0 data 262144 out res 51/04:e0:5f:f2:03/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x86c2001 ata3.00: cmd 35/00:80:bf:0f:04/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:00:3e:11:04/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:13:04/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:b0:0f:14:04/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:00:bf:27:04/00:02:00:00:00/e0 tag 0 cdb 0x0 data 262144 out res 51/04:80:3f:28:04/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/100 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: limiting speed to UDMA/66:PIO4 ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:44:04/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:b0:8f:45:04/00:01:00:00:00/e0 Emask 0x1 (device error) ata3: soft resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/66 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:00:3f:55:04/00:02:00:00:00/e0 tag 0 cdb 0x0 data 262144 out res 51/04:f0:4f:55:04/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/66 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:59:04/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:60:df:5a:04/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/66 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:63:04/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:80:bf:64:04/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/66 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:73:04/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:e0:5f:74:04/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/66 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:00:bf:86:04/00:02:00:00:00/e0 tag 0 cdb 0x0 data 262144 out res 51/04:40:7f:87:04/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/66 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata3.00: cmd 35/00:80:3f:8b:04/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 40/00:40:7f:87:04/00:01:00:00:00/e0 Emask 0x4 (timeout) ata3: port is slow to respond, please be patient (Status 0xd1) ata3: device not ready (errno=-16), forcing hardreset ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/66 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:94:04/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:4f:f0:94:04/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/66 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:99:04/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:60:5f:99:04/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/66 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:c1:04/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:91:ae:c2:04/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/66 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:c9:04/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:d0:6f:cb:04/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/66 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:00:bf:d9:04/00:02:00:00:00/e0 tag 0 cdb 0x0 data 262144 out res 51/04:d0:ef:d9:04/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/66 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: limiting speed to UDMA/33:PIO4 ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:f0:04/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:90:af:f1:04/00:01:00:00:00/e0 Emask 0x1 (device error) ata3: soft resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:00:3f:f9:04/00:02:00:00:00/e0 tag 0 cdb 0x0 data 262144 out res 51/04:40:ff:fa:04/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata3.00: cmd 35/00:80:3f:32:05/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 40/00:40:ff:fa:04/00:00:00:00:00/e0 Emask 0x4 (timeout) ata3: port is slow to respond, please be patient (Status 0xd1) ata3: device not ready (errno=-16), forcing hardreset ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata3.00: cmd 35/00:80:3f:47:05/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 40/00:40:ff:fa:04/00:00:00:00:00/e0 Emask 0x4 (timeout) ata3: port is slow to respond, please be patient (Status 0xd1) ata3: device not ready (errno=-16), forcing hardreset ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:70:05/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:c0:7f:71:05/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:7b:05/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:90:2f:7c:05/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:88:05/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:40:7f:89:05/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:97:05/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:90:af:98:05/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:ae:05/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:70:cf:ae:05/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:b8:05/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:a0:9f:b9:05/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x86c2001 ata3.00: cmd 35/00:80:bf:bc:05/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:00:3e:bf:05/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:c7:05/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:c0:7f:c9:05/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:cd:05/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:80:bf:ce:05/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:de:05/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:f1:ce:df:05/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:e6:05/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:90:2f:e7:05/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata3.00: cmd ca/00:00:3f:f4:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 out res 40/00:90:2f:e7:05/00:01:00:00:00/e0 Emask 0x4 (timeout) ata3: port is slow to respond, please be patient (Status 0xd1) ata3: device not ready (errno=-16), forcing hardreset ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:05:06/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:b0:8f:07:06/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:10:06/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:f0:cf:11:06/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:14:06/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:91:2e:15:06/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:29:06/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:f0:4f:2b:06/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:34:06/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:d0:6f:36:06/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:56:06/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:60:5f:56:06/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:5c:06/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:a0:1f:5d:06/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata3.00: cmd 35/00:00:bf:6c:06/00:02:00:00:00/e0 tag 0 cdb 0x0 data 262144 out res 40/00:a0:1f:5d:06/00:00:00:00:00/e0 Emask 0x4 (timeout) ata3: port is slow to respond, please be patient (Status 0xd1) ata3: device not ready (errno=-16), forcing hardreset ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:78:06/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:a0:9f:7a:06/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:08:3f:80:06/00:01:00:00:00/e0 tag 0 cdb 0x0 data 135168 out res 51/04:d8:6f:80:06/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:95:06/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:6f:50:95:06/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:a7:06/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:d0:6f:a8:06/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:ad:06/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:20:1f:ae:06/00:02:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:b8:06/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:10:2f:bb:06/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd ca/00:00:3f:d8:06/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 out res 51/04:60:df:d8:06/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:00:3f:da:06/00:04:00:00:00/e0 tag 0 cdb 0x0 data 524288 out res 51/04:e0:5f:dd:06/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:00:3f:e0:06/00:02:00:00:00/e0 tag 0 cdb 0x0 data 262144 out res 51/04:70:cf:e0:06/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:ee:06/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:3f:80:f0:06/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:05:07/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:b0:8f:06:07/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:45:07/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:31:0e:47:07/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:49:07/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:e0:5f:4a:07/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata3.00: cmd ca/00:00:3f:51:07/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 out res 40/00:e0:5f:4a:07/00:01:00:00:00/e0 Emask 0x4 (timeout) ata3: port is slow to respond, please be patient (Status 0xd1) ata3: device not ready (errno=-16), forcing hardreset ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:88:47:58:07/00:02:00:00:00/e0 tag 0 cdb 0x0 data 331776 out res 51/04:e8:e7:59:07/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:00:3f:61:07/00:02:00:00:00/e0 tag 0 cdb 0x0 data 262144 out res 51/04:d0:6f:61:07/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd ca/00:00:3f:6c:07/00:00:00:00:00/e0 tag 0 cdb 0x0 data 131072 out res 51/04:61:de:6c:07/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:80:07/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:b0:0f:82:07/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:00:3f:86:07/00:02:00:00:00/e0 tag 0 cdb 0x0 data 262144 out res 51/04:90:af:87:07/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:9c:07/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:4f:f0:9c:07/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata3.00: cmd 35/00:80:bf:a7:07/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 40/00:4f:f0:9c:07/00:01:00:00:00/e0 Emask 0x4 (timeout) ata3: port is slow to respond, please be patient (Status 0xd1) ata3: device not ready (errno=-16), forcing hardreset ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:b2:07/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:e0:df:b3:07/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:c4:07/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:00:bf:c5:07/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:00:bf:d6:07/00:02:00:00:00/e0 tag 0 cdb 0x0 data 262144 out res 51/04:e0:df:d6:07/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:e0:07/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:70:cf:e0:07/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata3.00: cmd 35/00:78:c7:e4:07/00:01:00:00:00/e0 tag 0 cdb 0x0 data 192512 out res 40/00:70:cf:e0:07/00:01:00:00:00/e0 Emask 0x4 (timeout) ata3: port is slow to respond, please be patient (Status 0xd1) ata3: device not ready (errno=-16), forcing hardreset ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:00:3f:ee:07/00:02:00:00:00/e0 tag 0 cdb 0x0 data 262144 out res 51/04:81:be:ee:07/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:f4:07/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:50:6f:f5:07/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:08:08/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:31:8e:08:08/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:0e:08/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:60:5f:0e:08/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:34:08/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:00:3f:36:08/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata3.00: cmd 35/00:80:3f:3f:08/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 40/00:00:3f:36:08/00:01:00:00:00/e0 Emask 0x4 (timeout) ata3: port is slow to respond, please be patient (Status 0xd1) ata3: device not ready (errno=-16), forcing hardreset ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:bf:4e:08/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:8f:b0:4f:08/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:66:08/00:01:00:00:00/e0 tag 0 cdb 0x0 data 196608 out res 51/04:70:4f:66:08/00:01:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x0 ata3.00: BMDMA2 stat 0x8652001 ata3.00: cmd 35/00:80:3f:85:08/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 51/04:d1:ee:86:08/00:00:00:00:00/e0 Emask 0x1 (device error) ata3.00: configured for UDMA/33 ata3: EH complete sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x2400000 action 0x2 frozen ata3.00: cmd 35/00:80:3f:9a:08/00:02:00:00:00/e0 tag 0 cdb 0x0 data 327680 out res 40/00:d1:ee:86:08/00:00:00:00:00/e0 Emask 0x4 (timeout) ata3: port is slow to respond, please be patient (Status 0xd1) raid5: Disk failure on sdc1, disabling device. Operation continuing on 3 devices ata3: device not ready (errno=-16), forcing hardreset ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/33 ata3: EH complete md: md0: reshape done. sd 2:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA EXT3-fs: can't read group descriptor 47 md: cannot remove active disk sdc1 from md0 ... md: cannot remove active disk sdc1 from md0 ... md: cannot remove active disk sdc1 from md0 ... md: cannot remove active disk sdc1 from md0 ... md: md0 stopped. md: unbind md: export_rdev(sdb1) md: unbind md: export_rdev(sdc1) md: unbind md: export_rdev(sda1) md: unbind md: export_rdev(hdc1)