[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20080124154804.GA22178@localhost.localdomain>
Date: Thu, 24 Jan 2008 18:48:04 +0300
From: Anton Vorontsov <avorontsov@...mvista.com>
To: Poonam_Aggrwal-b10812 <b10812@...escale.com>
Cc: kumar.gala@...escale.com, akpm@...ux-foundation.org,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
rubini@...ion.unipv.it, linuxppc-dev@...abs.org,
michael.barkowski@...escale.com, rich.cutler@...escale.com,
ashish.kalra@...escale.com, timur@...escale.com
Subject: Re: [PATCH UCC TDM 1/3 Updated] Platform changes for UCC TDM driver for MPC8323eRDB. Also includes related QE changes and dts entries.
Hello Poonam,
On Thu, Jan 24, 2008 at 04:00:06PM +0530, Poonam_Aggrwal-b10812 wrote:
> Thanks Stephen for your comments, incorporated them.
> From: Poonam Aggrwal <b10812@...escale.com>
>
> This patch makes necessary changes in the QE and UCC framework to support
> TDM. It also adds support to configure the BRG properly through device
> tree entries. Includes the device tree changes for UCC TDM driver as well.
> It also includes device tree entries for UCC TDM driver.
>
> Tested on MPC8323ERDB platform.
>
> Signed-off-by: Poonam Aggrwal <b10812@...escale.com>
> Signed-off-by: Ashish Kalra <ashish.kalra@...escale.com>
> Signed-off-by: Kim Phillips <Kim.Phillips@...escale.com>
> Signed-off-by: Michael Barkowski <michael.barkowski@...escale.com>
> ---
> arch/powerpc/boot/dts/mpc832x_rdb.dts | 58 +++++++
> arch/powerpc/sysdev/qe_lib/qe.c | 184 +++++++++++++++++++++--
> arch/powerpc/sysdev/qe_lib/ucc.c | 265 +++++++++++++++++++++++++++++++++
> arch/powerpc/sysdev/qe_lib/ucc_fast.c | 37 +++++
> include/asm-powerpc/qe.h | 8 +
> include/asm-powerpc/ucc.h | 4 +
> include/asm-powerpc/ucc_fast.h | 4 +
> 7 files changed, 548 insertions(+), 12 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
> index 388c8a7..c0e6283 100644
> --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
> +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
> @@ -105,6 +105,17 @@
> device_type = "par_io";
> num-ports = <7>;
>
> + ucc1pio:ucc_pin@01 {
> + pio-map = <
> + /* port pin dir open_drain assignment has_irq */
> + 0 e 2 0 1 0 /* CLK11 */
> + 3 16 1 0 2 0 /* BRG9 */
> + 3 1b 1 0 2 0 /* BRG3 */
> + 0 0 3 0 2 0 /* TDMATxD0 */
> + 0 4 3 0 2 0 /* TDMARxD0 */
> + 3 1b 2 0 1 0>; /* CLK1 */
> + };
> +
Can we not introduce new pio-maps in the device trees? There
were debates regarding this, and if I understood everything
correctly, pio-maps considered as a bad taste. Better
do bunch of par_io_config_pin() in the board file. Better
yet fixup the firmware (u-boot) to set up dedicated pins
correctly.
Thanks,
--
Anton Vorontsov
email: cbou@...l.ru
backup email: ya-cbou@...dex.ru
irc://irc.freenode.net/bd2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists