| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 25 Jan 2008 18:16:17 -0500
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-ide@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] libata updates
Honestly, this is the least interesting merge push I've had in a while.
We're all doing debugging and such, so nothing major is below.
I have some queued stuff (notably a sata_mv update) still to come, but
this is the stuff that's been pending and in -mm for a while.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/Kconfig | 9 +
drivers/ata/Makefile | 1 +
drivers/ata/ahci.c | 72 ++--
drivers/ata/ata_generic.c | 51 ++-
drivers/ata/ata_piix.c | 393 ++++++++++++++----
drivers/ata/libata-acpi.c | 117 ++++--
drivers/ata/libata-core.c | 805 ++++++++++++++++------------------
drivers/ata/libata-eh.c | 299 ++++++++++---
drivers/ata/libata-scsi.c | 40 ++-
drivers/ata/libata-sff.c | 199 +++++----
drivers/ata/libata.h | 6 +-
drivers/ata/pata_acpi.c | 67 +---
drivers/ata/pata_ali.c | 2 +-
drivers/ata/pata_amd.c | 128 ++++--
drivers/ata/pata_bf54x.c | 41 +-
drivers/ata/pata_cs5520.c | 2 +-
drivers/ata/pata_hpt37x.c | 7 +-
drivers/ata/pata_icside.c | 3 +-
drivers/ata/pata_it821x.c | 35 ++-
drivers/ata/pata_ixp4xx_cf.c | 26 +-
drivers/ata/pata_legacy.c | 912 +++++++++++++++++++++++++++++++--------
drivers/ata/pata_mpc52xx.c | 2 +-
drivers/ata/pata_ninja32.c | 214 +++++++++
drivers/ata/pata_pcmcia.c | 101 ++++-
drivers/ata/pata_pdc2027x.c | 2 +-
drivers/ata/pata_pdc202xx_old.c | 5 +-
drivers/ata/pata_qdi.c | 30 +-
drivers/ata/pata_scc.c | 30 +-
drivers/ata/pata_serverworks.c | 9 +-
drivers/ata/pata_via.c | 3 +-
drivers/ata/pata_winbond.c | 30 +-
drivers/ata/pdc_adma.c | 5 +-
drivers/ata/sata_fsl.c | 5 +-
drivers/ata/sata_inic162x.c | 2 +-
drivers/ata/sata_mv.c | 3 +-
drivers/ata/sata_nv.c | 25 +-
drivers/ata/sata_promise.c | 98 ++---
drivers/ata/sata_promise.h | 2 +-
drivers/ata/sata_qstor.c | 15 +-
drivers/ata/sata_sil.c | 10 +-
drivers/ata/sata_sil24.c | 30 +-
drivers/ata/sata_sx4.c | 15 +-
drivers/scsi/ipr.c | 9 +-
drivers/scsi/libsas/sas_ata.c | 14 +-
include/linux/ata.h | 110 ++++-
include/linux/cdrom.h | 3 +
include/linux/libata.h | 184 +++++---
include/linux/pci_ids.h | 3 +
48 files changed, 2851 insertions(+), 1323 deletions(-)
create mode 100644 drivers/ata/pata_ninja32.c
Al Viro (1):
libata annotations and fixes
Alan Cox (13):
libata: Disable ATA8-ACS proposed Trusted Computing features by default
libata: IORDY handling
libata-sff: tf_load
pata_ninja32: Cardbus ATA initial support
pata_pcmcia: Add support for dumb 8bit IDE emulations
libata/pata_it821x: Improve handling of poorly compatible emulations
pata_pcmcia: Minor cleanups and support for dual channel cards
pata_legacy: resychronize with upstream changes and resubmit
pata_mpc52xx: remove un-needed assignment
pata_serverworks: Fix cable types and cosmetics
pata_winbond: error return
ata_generic: Cenatek support
pata_legacy: Merge winbond support
Albert Lee (1):
libata: zero xfer length on ATAPI data xfer IRQ is HSM violation
Andrew Morton (4):
drivers/ata/libata-eh.c: fix printk warning
pata_hpt37x: checkpatch fixes
[libata] pata_winbond: update for new ->data_xfer hook
[libata] pata_legacy: typo fix
James Bottomley (1):
[libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof()
Jeff Garzik (3):
libata: checkpatch fixes
[libata] Build fix WRT ata_is_xxx() new API introduction
libata: make ata_port_queue_task() an internal function
Peter Schwenke (1):
ata_piix: Add Toshiba Satellite R20 and Tecra M6 to broken suspend list.
Shaohua Li (1):
libata-acpi: add ACPI _PSx method
Tejun Heo (40):
ahci: update PCS programming
libata: rearrange ATA_DFLAG_*
libata: implement protocol tests
libata: factor out ata_eh_schedule_probe()
libata: move ata_set_mode() to libata-eh.c
libata: clean up EH speed down implementation
libata: adjust speed down rules
libata: implement ATA_DFLAG_DUBIOUS_XFER
libata: implement fast speed down for unverified data transfer mode
ata_generic: unindent loop in generic_set_mode()
libata: export xfermode / PATA timing related functions
libata: clean up xfermode / PATA timing related stuff
libata: kill ata_id_to_dma_mode()
libata: xfer_mask is unsigned long not unsigned int
libata: add ATA_CBL_PATA_IGN
sata_promise: make pdc_atapi_pkt() use values from qc->tf
ata_piix: separate controller IDs into separate enum
libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes()
libata: fix ata_acpi_gtm_xfermask()
libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi
libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask()
pata_amd: update mode selection for NV PATAs
libata: convert NCQ test in ata_qc_issue() to ata_is_ncq()
libata: make atapi_request_sense() use sg
cdrom: add more GPCMD_* constants
libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_*
libata: add ATAPI_* cmd types and implement atapi_cmd_type()
libata: update ->data_xfer hook for ATAPI
libata: kill non-sg DMA interface
libata: change ATA_QCFLAG_DMAMAP semantics
libata: convert to chained sg
libata: make qc->nbytes include extra buffers
ata_piix: kill unused constants and flags
libata: use dev_driver_string() instead of "libata" in libata-sff.c
pata_pcmcia: convert to new data_xfer prototype
libata: factor out ata_pci_activate_sff_host() from ata_pci_one()
ata_piix: convert to prepare - activate initialization
ata_piix: implement SIDPR SCR access
ahci: factor out AHCI enabling and enable AHCI before reading CAP
libata: fix off-by-one in error categorization
akpm@...ux-foundation.org (2):
[libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof()
fix drivers/ata/sata_fsl.c double-decl
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ba63619..2478cca 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -459,6 +459,15 @@ config PATA_NETCELL
If unsure, say N.
+config PATA_NINJA32
+ tristate "Ninja32/Delkin Cardbus ATA support (Experimental)"
+ depends on PCI && EXPERIMENTAL
+ help
+ This option enables support for the Ninja32, Delkin and
+ possibly other brands of Cardbus ATA adapter
+
+ If unsure, say N.
+
config PATA_NS87410
tristate "Nat Semi NS87410 PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index b13feb2..82550c1 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_PATA_IT821X) += pata_it821x.o
obj-$(CONFIG_PATA_IT8213) += pata_it8213.o
obj-$(CONFIG_PATA_JMICRON) += pata_jmicron.o
obj-$(CONFIG_PATA_NETCELL) += pata_netcell.o
+obj-$(CONFIG_PATA_NINJA32) += pata_ninja32.o
obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o
obj-$(CONFIG_PATA_NS87415) += pata_ns87415.o
obj-$(CONFIG_PATA_OPTI) += pata_opti.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 54f38c2..6f089b8 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -198,18 +198,18 @@ enum {
};
struct ahci_cmd_hdr {
- u32 opts;
- u32 status;
- u32 tbl_addr;
- u32 tbl_addr_hi;
- u32 reserved[4];
+ __le32 opts;
+ __le32 status;
+ __le32 tbl_addr;
+ __le32 tbl_addr_hi;
+ __le32 reserved[4];
};
struct ahci_sg {
- u32 addr;
- u32 addr_hi;
- u32 reserved;
- u32 flags_size;
+ __le32 addr;
+ __le32 addr_hi;
+ __le32 reserved;
+ __le32 flags_size;
};
struct ahci_host_priv {
@@ -597,6 +597,20 @@ static inline void __iomem *ahci_port_base(struct ata_port *ap)
return __ahci_port_base(ap->host, ap->port_no);
}
+static void ahci_enable_ahci(void __iomem *mmio)
+{
+ u32 tmp;
+
+ /* turn on AHCI_EN */
+ tmp = readl(mmio + HOST_CTL);
+ if (!(tmp & HOST_AHCI_EN)) {
+ tmp |= HOST_AHCI_EN;
+ writel(tmp, mmio + HOST_CTL);
+ tmp = readl(mmio + HOST_CTL); /* flush && sanity check */
+ WARN_ON(!(tmp & HOST_AHCI_EN));
+ }
+}
+
/**
* ahci_save_initial_config - Save and fixup initial config values
* @pdev: target PCI device
@@ -619,6 +633,9 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
u32 cap, port_map;
int i;
+ /* make sure AHCI mode is enabled before accessing CAP */
+ ahci_enable_ahci(mmio);
+
/* Values prefixed with saved_ are written back to host after
* reset. Values without are used for driver operation.
*/
@@ -1036,19 +1053,17 @@ static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
static int ahci_reset_controller(struct ata_host *host)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
+ struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
u32 tmp;
/* we must be in AHCI mode, before using anything
* AHCI-specific, such as HOST_RESET.
*/
- tmp = readl(mmio + HOST_CTL);
- if (!(tmp & HOST_AHCI_EN)) {
- tmp |= HOST_AHCI_EN;
- writel(tmp, mmio + HOST_CTL);
- }
+ ahci_enable_ahci(mmio);
/* global controller reset */
+ tmp = readl(mmio + HOST_CTL);
if ((tmp & HOST_RESET) == 0) {
writel(tmp | HOST_RESET, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
@@ -1067,8 +1082,7 @@ static int ahci_reset_controller(struct ata_host *host)
}
/* turn on AHCI mode */
- writel(HOST_AHCI_EN, mmio + HOST_CTL);
- (void) readl(mmio + HOST_CTL); /* flush */
+ ahci_enable_ahci(mmio);
/* some registers might be cleared on reset. restore initial values */
ahci_restore_initial_config(host);
@@ -1078,8 +1092,10 @@ static int ahci_reset_controller(struct ata_host *host)
/* configure PCS */
pci_read_config_word(pdev, 0x92, &tmp16);
- tmp16 |= 0xf;
- pci_write_config_word(pdev, 0x92, tmp16);
+ if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
+ tmp16 |= hpriv->port_map;
+ pci_write_config_word(pdev, 0x92, tmp16);
+ }
}
return 0;
@@ -1480,35 +1496,31 @@ static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
{
struct scatterlist *sg;
- struct ahci_sg *ahci_sg;
- unsigned int n_sg = 0;
+ struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
+ unsigned int si;
VPRINTK("ENTER\n");
/*
* Next, the S/G list.
*/
- ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
dma_addr_t addr = sg_dma_address(sg);
u32 sg_len = sg_dma_len(sg);
- ahci_sg->addr = cpu_to_le32(addr & 0xffffffff);
- ahci_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
- ahci_sg->flags_size = cpu_to_le32(sg_len - 1);
-
- ahci_sg++;
- n_sg++;
+ ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
+ ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
+ ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
}
- return n_sg;
+ return si;
}
static void ahci_qc_prep(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ahci_port_priv *pp = ap->private_data;
- int is_atapi = is_atapi_taskfile(&qc->tf);
+ int is_atapi = ata_is_atapi(qc->tf.protocol);
void *cmd_tbl;
u32 opts;
const u32 cmd_fis_len = 5; /* five dwords */
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 9032998..2053420 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -26,7 +26,7 @@
#include <linux/libata.h>
#define DRV_NAME "ata_generic"
-#define DRV_VERSION "0.2.13"
+#define DRV_VERSION "0.2.15"
/*
* A generic parallel ATA driver using libata
@@ -48,27 +48,47 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
struct ata_port *ap = link->ap;
int dma_enabled = 0;
struct ata_device *dev;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
/* Bits 5 and 6 indicate if DMA is active on master/slave */
if (ap->ioaddr.bmdma_addr)
dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ if (pdev->vendor == PCI_VENDOR_ID_CENATEK)
+ dma_enabled = 0xFF;
+
ata_link_for_each_dev(dev, link) {
- if (ata_dev_enabled(dev)) {
- /* We don't really care */
- dev->pio_mode = XFER_PIO_0;
- dev->dma_mode = XFER_MW_DMA_0;
- /* We do need the right mode information for DMA or PIO
- and this comes from the current configuration flags */
- if (dma_enabled & (1 << (5 + dev->devno))) {
- ata_id_to_dma_mode(dev, XFER_MW_DMA_0);
- dev->flags &= ~ATA_DFLAG_PIO;
- } else {
- ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
- dev->xfer_mode = XFER_PIO_0;
- dev->xfer_shift = ATA_SHIFT_PIO;
- dev->flags |= ATA_DFLAG_PIO;
+ if (!ata_dev_enabled(dev))
+ continue;
+
+ /* We don't really care */
+ dev->pio_mode = XFER_PIO_0;
+ dev->dma_mode = XFER_MW_DMA_0;
+ /* We do need the right mode information for DMA or PIO
+ and this comes from the current configuration flags */
+ if (dma_enabled & (1 << (5 + dev->devno))) {
+ unsigned int xfer_mask = ata_id_xfermask(dev->id);
+ const char *name;
+
+ if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA))
+ name = ata_mode_string(xfer_mask);
+ else {
+ /* SWDMA perhaps? */
+ name = "DMA";
+ xfer_mask |= ata_xfer_mode2mask(XFER_MW_DMA_0);
}
+
+ ata_dev_printk(dev, KERN_INFO, "configured for %s\n",
+ name);
+
+ dev->xfer_mode = ata_xfer_mask2mode(xfer_mask);
+ dev->xfer_shift = ata_xfer_mode2shift(dev->xfer_mode);
+ dev->flags &= ~ATA_DFLAG_PIO;
+ } else {
+ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
+ dev->xfer_mode = XFER_PIO_0;
+ dev->xfer_shift = ATA_SHIFT_PIO;
+ dev->flags |= ATA_DFLAG_PIO;
}
}
return 0;
@@ -185,6 +205,7 @@ static struct pci_device_id ata_generic[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C561), },
{ PCI_DEVICE(PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C558), },
+ { PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), },
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), },
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), },
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index b406b39..a65c8ae 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -101,39 +101,21 @@ enum {
ICH5_PMR = 0x90, /* port mapping register */
ICH5_PCS = 0x92, /* port control and status */
PIIX_SCC = 0x0A, /* sub-class code register */
+ PIIX_SIDPR_BAR = 5,
+ PIIX_SIDPR_LEN = 16,
+ PIIX_SIDPR_IDX = 0,
+ PIIX_SIDPR_DATA = 4,
- PIIX_FLAG_SCR = (1 << 26), /* SCR available */
PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */
PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */
+ PIIX_FLAG_SIDPR = (1 << 29), /* SATA idx/data pair regs */
PIIX_PATA_FLAGS = ATA_FLAG_SLAVE_POSS,
PIIX_SATA_FLAGS = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR,
- /* combined mode. if set, PATA is channel 0.
- * if clear, PATA is channel 1.
- */
- PIIX_PORT_ENABLED = (1 << 0),
- PIIX_PORT_PRESENT = (1 << 4),
-
PIIX_80C_PRI = (1 << 5) | (1 << 4),
PIIX_80C_SEC = (1 << 7) | (1 << 6),
- /* controller IDs */
- piix_pata_mwdma = 0, /* PIIX3 MWDMA only */
- piix_pata_33, /* PIIX4 at 33Mhz */
- ich_pata_33, /* ICH up to UDMA 33 only */
- ich_pata_66, /* ICH up to 66 Mhz */
- ich_pata_100, /* ICH up to UDMA 100 */
- ich5_sata,
- ich6_sata,
- ich6_sata_ahci,
- ich6m_sata_ahci,
- ich8_sata_ahci,
- ich8_2port_sata,
- ich8m_apple_sata_ahci, /* locks up on second port enable */
- tolapai_sata_ahci,
- piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */
-
/* constants for mapping table */
P0 = 0, /* port 0 */
P1 = 1, /* port 1 */
@@ -149,6 +131,24 @@ enum {
PIIX_HOST_BROKEN_SUSPEND = (1 << 24),
};
+enum piix_controller_ids {
+ /* controller IDs */
+ piix_pata_mwdma, /* PIIX3 MWDMA only */
+ piix_pata_33, /* PIIX4 at 33Mhz */
+ ich_pata_33, /* ICH up to UDMA 33 only */
+ ich_pata_66, /* ICH up to 66 Mhz */
+ ich_pata_100, /* ICH up to UDMA 100 */
+ ich5_sata,
+ ich6_sata,
+ ich6_sata_ahci,
+ ich6m_sata_ahci,
+ ich8_sata_ahci,
+ ich8_2port_sata,
+ ich8m_apple_sata_ahci, /* locks up on second port enable */
+ tolapai_sata_ahci,
+ piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */
+};
+
struct piix_map_db {
const u32 mask;
const u16 port_enable;
@@ -157,6 +157,7 @@ struct piix_map_db {
struct piix_host_priv {
const int *map;
+ void __iomem *sidpr;
};
static int piix_init_one(struct pci_dev *pdev,
@@ -167,6 +168,9 @@ static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static int ich_pata_cable_detect(struct ata_port *ap);
static u8 piix_vmw_bmdma_status(struct ata_port *ap);
+static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val);
+static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val);
+static void piix_sidpr_error_handler(struct ata_port *ap);
#ifdef CONFIG_PM
static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int piix_pci_device_resume(struct pci_dev *pdev);
@@ -321,7 +325,6 @@ static const struct ata_port_operations piix_pata_ops = {
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
@@ -353,7 +356,6 @@ static const struct ata_port_operations ich_pata_ops = {
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ich_pata_cable_detect,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
@@ -380,7 +382,6 @@ static const struct ata_port_operations piix_sata_ops = {
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
@@ -419,6 +420,35 @@ static const struct ata_port_operations piix_vmw_ops = {
.port_start = ata_port_start,
};
+static const struct ata_port_operations piix_sidpr_sata_ops = {
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .data_xfer = ata_data_xfer,
+
+ .scr_read = piix_sidpr_scr_read,
+ .scr_write = piix_sidpr_scr_write,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = piix_sidpr_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+
+ .port_start = ata_port_start,
+};
+
static const struct piix_map_db ich5_map_db = {
.mask = 0x7,
.port_enable = 0x3,
@@ -526,7 +556,6 @@ static const struct piix_map_db *piix_map_db_table[] = {
static struct ata_port_info piix_port_info[] = {
[piix_pata_mwdma] = /* PIIX3 MWDMA only */
{
- .sht = &piix_sht,
.flags = PIIX_PATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
@@ -535,7 +564,6 @@ static struct ata_port_info piix_port_info[] = {
[piix_pata_33] = /* PIIX4 at 33MHz */
{
- .sht = &piix_sht,
.flags = PIIX_PATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
@@ -545,7 +573,6 @@ static struct ata_port_info piix_port_info[] = {
[ich_pata_33] = /* ICH0 - ICH at 33Mhz*/
{
- .sht = &piix_sht,
.flags = PIIX_PATA_FLAGS,
.pio_mask = 0x1f, /* pio 0-4 */
.mwdma_mask = 0x06, /* Check: maybe 0x07 */
@@ -555,7 +582,6 @@ static struct ata_port_info piix_port_info[] = {
[ich_pata_66] = /* ICH controllers up to 66MHz */
{
- .sht = &piix_sht,
.flags = PIIX_PATA_FLAGS,
.pio_mask = 0x1f, /* pio 0-4 */
.mwdma_mask = 0x06, /* MWDMA0 is broken on chip */
@@ -565,7 +591,6 @@ static struct ata_port_info piix_port_info[] = {
[ich_pata_100] =
{
- .sht = &piix_sht,
.flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x06, /* mwdma1-2 */
@@ -575,7 +600,6 @@ static struct ata_port_info piix_port_info[] = {
[ich5_sata] =
{
- .sht = &piix_sht,
.flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -585,8 +609,7 @@ static struct ata_port_info piix_port_info[] = {
[ich6_sata] =
{
- .sht = &piix_sht,
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR,
+ .flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
@@ -595,9 +618,7 @@ static struct ata_port_info piix_port_info[] = {
[ich6_sata_ahci] =
{
- .sht = &piix_sht,
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
- PIIX_FLAG_AHCI,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
@@ -606,9 +627,7 @@ static struct ata_port_info piix_port_info[] = {
[ich6m_sata_ahci] =
{
- .sht = &piix_sht,
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
- PIIX_FLAG_AHCI,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
@@ -617,9 +636,8 @@ static struct ata_port_info piix_port_info[] = {
[ich8_sata_ahci] =
{
- .sht = &piix_sht,
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
- PIIX_FLAG_AHCI,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI |
+ PIIX_FLAG_SIDPR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
@@ -628,9 +646,8 @@ static struct ata_port_info piix_port_info[] = {
[ich8_2port_sata] =
{
- .sht = &piix_sht,
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
- PIIX_FLAG_AHCI,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI |
+ PIIX_FLAG_SIDPR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
@@ -639,9 +656,7 @@ static struct ata_port_info piix_port_info[] = {
[tolapai_sata_ahci] =
{
- .sht = &piix_sht,
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
- PIIX_FLAG_AHCI,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
@@ -650,9 +665,8 @@ static struct ata_port_info piix_port_info[] = {
[ich8m_apple_sata_ahci] =
{
- .sht = &piix_sht,
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR |
- PIIX_FLAG_AHCI,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI |
+ PIIX_FLAG_SIDPR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
@@ -1001,6 +1015,180 @@ static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev)
do_pata_set_dmamode(ap, adev, 1);
}
+/*
+ * Serial ATA Index/Data Pair Superset Registers access
+ *
+ * Beginning from ICH8, there's a sane way to access SCRs using index
+ * and data register pair located at BAR5. This creates an
+ * interesting problem of mapping two SCRs to one port.
+ *
+ * Although they have separate SCRs, the master and slave aren't
+ * independent enough to be treated as separate links - e.g. softreset
+ * resets both. Also, there's no protocol defined for hard resetting
+ * singled device sharing the virtual port (no defined way to acquire
+ * device signature). This is worked around by merging the SCR values
+ * into one sensible value and requesting follow-up SRST after
+ * hardreset.
+ *
+ * SCR merging is perfomed in nibbles which is the unit contents in
+ * SCRs are organized. If two values are equal, the value is used.
+ * When they differ, merge table which lists precedence of possible
+ * values is consulted and the first match or the last entry when
+ * nothing matches is used. When there's no merge table for the
+ * specific nibble, value from the first port is used.
+ */
+static const int piix_sidx_map[] = {
+ [SCR_STATUS] = 0,
+ [SCR_ERROR] = 2,
+ [SCR_CONTROL] = 1,
+};
+
+static void piix_sidpr_sel(struct ata_device *dev, unsigned int reg)
+{
+ struct ata_port *ap = dev->link->ap;
+ struct piix_host_priv *hpriv = ap->host->private_data;
+
+ iowrite32(((ap->port_no * 2 + dev->devno) << 8) | piix_sidx_map[reg],
+ hpriv->sidpr + PIIX_SIDPR_IDX);
+}
+
+static int piix_sidpr_read(struct ata_device *dev, unsigned int reg)
+{
+ struct piix_host_priv *hpriv = dev->link->ap->host->private_data;
+
+ piix_sidpr_sel(dev, reg);
+ return ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
+}
+
+static void piix_sidpr_write(struct ata_device *dev, unsigned int reg, u32 val)
+{
+ struct piix_host_priv *hpriv = dev->link->ap->host->private_data;
+
+ piix_sidpr_sel(dev, reg);
+ iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
+}
+
+u32 piix_merge_scr(u32 val0, u32 val1, const int * const *merge_tbl)
+{
+ u32 val = 0;
+ int i, mi;
+
+ for (i = 0, mi = 0; i < 32 / 4; i++) {
+ u8 c0 = (val0 >> (i * 4)) & 0xf;
+ u8 c1 = (val1 >> (i * 4)) & 0xf;
+ u8 merged = c0;
+ const int *cur;
+
+ /* if no merge preference, assume the first value */
+ cur = merge_tbl[mi];
+ if (!cur)
+ goto done;
+ mi++;
+
+ /* if two values equal, use it */
+ if (c0 == c1)
+ goto done;
+
+ /* choose the first match or the last from the merge table */
+ while (*cur != -1) {
+ if (c0 == *cur || c1 == *cur)
+ break;
+ cur++;
+ }
+ if (*cur == -1)
+ cur--;
+ merged = *cur;
+ done:
+ val |= merged << (i * 4);
+ }
+
+ return val;
+}
+
+static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val)
+{
+ const int * const sstatus_merge_tbl[] = {
+ /* DET */ (const int []){ 1, 3, 0, 4, 3, -1 },
+ /* SPD */ (const int []){ 2, 1, 0, -1 },
+ /* IPM */ (const int []){ 6, 2, 1, 0, -1 },
+ NULL,
+ };
+ const int * const scontrol_merge_tbl[] = {
+ /* DET */ (const int []){ 1, 0, 4, 0, -1 },
+ /* SPD */ (const int []){ 0, 2, 1, 0, -1 },
+ /* IPM */ (const int []){ 0, 1, 2, 3, 0, -1 },
+ NULL,
+ };
+ u32 v0, v1;
+
+ if (reg >= ARRAY_SIZE(piix_sidx_map))
+ return -EINVAL;
+
+ if (!(ap->flags & ATA_FLAG_SLAVE_POSS)) {
+ *val = piix_sidpr_read(&ap->link.device[0], reg);
+ return 0;
+ }
+
+ v0 = piix_sidpr_read(&ap->link.device[0], reg);
+ v1 = piix_sidpr_read(&ap->link.device[1], reg);
+
+ switch (reg) {
+ case SCR_STATUS:
+ *val = piix_merge_scr(v0, v1, sstatus_merge_tbl);
+ break;
+ case SCR_ERROR:
+ *val = v0 | v1;
+ break;
+ case SCR_CONTROL:
+ *val = piix_merge_scr(v0, v1, scontrol_merge_tbl);
+ break;
+ }
+
+ return 0;
+}
+
+static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val)
+{
+ if (reg >= ARRAY_SIZE(piix_sidx_map))
+ return -EINVAL;
+
+ piix_sidpr_write(&ap->link.device[0], reg, val);
+
+ if (ap->flags & ATA_FLAG_SLAVE_POSS)
+ piix_sidpr_write(&ap->link.device[1], reg, val);
+
+ return 0;
+}
+
+static int piix_sidpr_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+ int rc;
+
+ /* do hardreset */
+ rc = sata_link_hardreset(link, timing, deadline);
+ if (rc) {
+ ata_link_printk(link, KERN_ERR,
+ "COMRESET failed (errno=%d)\n", rc);
+ return rc;
+ }
+
+ /* TODO: phy layer with polling, timeouts, etc. */
+ if (ata_link_offline(link)) {
+ *class = ATA_DEV_NONE;
+ return 0;
+ }
+
+ return -EAGAIN;
+}
+
+static void piix_sidpr_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
+ piix_sidpr_hardreset, ata_std_postreset);
+}
+
#ifdef CONFIG_PM
static int piix_broken_suspend(void)
{
@@ -1034,6 +1222,13 @@ static int piix_broken_suspend(void)
},
},
{
+ .ident = "TECRA M6",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M6"),
+ },
+ },
+ {
.ident = "TECRA M7",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
@@ -1048,6 +1243,13 @@ static int piix_broken_suspend(void)
},
},
{
+ .ident = "Satellite R20",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite R20"),
+ },
+ },
+ {
.ident = "Satellite R25",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
@@ -1253,10 +1455,10 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
return no_piix_dma;
}
-static void __devinit piix_init_pcs(struct pci_dev *pdev,
- struct ata_port_info *pinfo,
+static void __devinit piix_init_pcs(struct ata_host *host,
const struct piix_map_db *map_db)
{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
u16 pcs, new_pcs;
pci_read_config_word(pdev, ICH5_PCS, &pcs);
@@ -1270,11 +1472,10 @@ static void __devinit piix_init_pcs(struct pci_dev *pdev,
}
}
-static void __devinit piix_init_sata_map(struct pci_dev *pdev,
- struct ata_port_info *pinfo,
- const struct piix_map_db *map_db)
+static const int *__devinit piix_init_sata_map(struct pci_dev *pdev,
+ struct ata_port_info *pinfo,
+ const struct piix_map_db *map_db)
{
- struct piix_host_priv *hpriv = pinfo[0].private_data;
const int *map;
int i, invalid_map = 0;
u8 map_value;
@@ -1298,7 +1499,6 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev,
case IDE:
WARN_ON((i & 1) || map[i + 1] != IDE);
pinfo[i / 2] = piix_port_info[ich_pata_100];
- pinfo[i / 2].private_data = hpriv;
i++;
printk(" IDE IDE");
break;
@@ -1316,7 +1516,33 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev,
dev_printk(KERN_ERR, &pdev->dev,
"invalid MAP value %u\n", map_value);
- hpriv->map = map;
+ return map;
+}
+
+static void __devinit piix_init_sidpr(struct ata_host *host)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+ struct piix_host_priv *hpriv = host->private_data;
+ int i;
+
+ /* check for availability */
+ for (i = 0; i < 4; i++)
+ if (hpriv->map[i] == IDE)
+ return;
+
+ if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR))
+ return;
+
+ if (pci_resource_start(pdev, PIIX_SIDPR_BAR) == 0 ||
+ pci_resource_len(pdev, PIIX_SIDPR_BAR) != PIIX_SIDPR_LEN)
+ return;
+
+ if (pcim_iomap_regions(pdev, 1 << PIIX_SIDPR_BAR, DRV_NAME))
+ return;
+
+ hpriv->sidpr = pcim_iomap_table(pdev)[PIIX_SIDPR_BAR];
+ host->ports[0]->ops = &piix_sidpr_sata_ops;
+ host->ports[1]->ops = &piix_sidpr_sata_ops;
}
static void piix_iocfg_bit18_quirk(struct pci_dev *pdev)
@@ -1375,8 +1601,10 @@ static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
struct device *dev = &pdev->dev;
struct ata_port_info port_info[2];
const struct ata_port_info *ppi[] = { &port_info[0], &port_info[1] };
- struct piix_host_priv *hpriv;
unsigned long port_flags;
+ struct ata_host *host;
+ struct piix_host_priv *hpriv;
+ int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
@@ -1386,17 +1614,31 @@ static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (!in_module_init)
return -ENODEV;
+ port_info[0] = piix_port_info[ent->driver_data];
+ port_info[1] = piix_port_info[ent->driver_data];
+
+ port_flags = port_info[0].flags;
+
+ /* enable device and prepare host */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ /* SATA map init can change port_info, do it before prepping host */
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
return -ENOMEM;
- port_info[0] = piix_port_info[ent->driver_data];
- port_info[1] = piix_port_info[ent->driver_data];
- port_info[0].private_data = hpriv;
- port_info[1].private_data = hpriv;
+ if (port_flags & ATA_FLAG_SATA)
+ hpriv->map = piix_init_sata_map(pdev, port_info,
+ piix_map_db_table[ent->driver_data]);
- port_flags = port_info[0].flags;
+ rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+ if (rc)
+ return rc;
+ host->private_data = hpriv;
+ /* initialize controller */
if (port_flags & PIIX_FLAG_AHCI) {
u8 tmp;
pci_read_config_byte(pdev, PIIX_SCC, &tmp);
@@ -1407,12 +1649,9 @@ static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
}
}
- /* Initialize SATA map */
if (port_flags & ATA_FLAG_SATA) {
- piix_init_sata_map(pdev, port_info,
- piix_map_db_table[ent->driver_data]);
- piix_init_pcs(pdev, port_info,
- piix_map_db_table[ent->driver_data]);
+ piix_init_pcs(host, piix_map_db_table[ent->driver_data]);
+ piix_init_sidpr(host);
}
/* apply IOCFG bit18 quirk */
@@ -1431,12 +1670,14 @@ static int piix_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* This writes into the master table but it does not
really matter for this errata as we will apply it to
all the PIIX devices on the board */
- port_info[0].mwdma_mask = 0;
- port_info[0].udma_mask = 0;
- port_info[1].mwdma_mask = 0;
- port_info[1].udma_mask = 0;
+ host->ports[0]->mwdma_mask = 0;
+ host->ports[0]->udma_mask = 0;
+ host->ports[1]->mwdma_mask = 0;
+ host->ports[1]->udma_mask = 0;
}
- return ata_pci_init_one(pdev, ppi);
+
+ pci_set_master(pdev);
+ return ata_pci_activate_sff_host(host, ata_interrupt, &piix_sht);
}
static int __init piix_init(void)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 7bf4bef..9e8ec19 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -442,40 +442,77 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf)
}
/**
+ * ata_acpi_gtm_xfermode - determine xfermode from GTM parameter
+ * @dev: target device
+ * @gtm: GTM parameter to use
+ *
+ * Determine xfermask for @dev from @gtm.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * Determined xfermask.
+ */
+unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev,
+ const struct ata_acpi_gtm *gtm)
+{
+ unsigned long xfer_mask = 0;
+ unsigned int type;
+ int unit;
+ u8 mode;
+
+ /* we always use the 0 slot for crap hardware */
+ unit = dev->devno;
+ if (!(gtm->flags & 0x10))
+ unit = 0;
+
+ /* PIO */
+ mode = ata_timing_cycle2mode(ATA_SHIFT_PIO, gtm->drive[unit].pio);
+ xfer_mask |= ata_xfer_mode2mask(mode);
+
+ /* See if we have MWDMA or UDMA data. We don't bother with
+ * MWDMA if UDMA is available as this means the BIOS set UDMA
+ * and our error changedown if it works is UDMA to PIO anyway.
+ */
+ if (!(gtm->flags & (1 << (2 * unit))))
+ type = ATA_SHIFT_MWDMA;
+ else
+ type = ATA_SHIFT_UDMA;
+
+ mode = ata_timing_cycle2mode(type, gtm->drive[unit].dma);
+ xfer_mask |= ata_xfer_mode2mask(mode);
+
+ return xfer_mask;
+}
+EXPORT_SYMBOL_GPL(ata_acpi_gtm_xfermask);
+
+/**
* ata_acpi_cbl_80wire - Check for 80 wire cable
* @ap: Port to check
+ * @gtm: GTM data to use
*
- * Return 1 if the ACPI mode data for this port indicates the BIOS selected
- * an 80wire mode.
+ * Return 1 if the @gtm indicates the BIOS selected an 80wire mode.
*/
-
-int ata_acpi_cbl_80wire(struct ata_port *ap)
+int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm)
{
- const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
- int valid = 0;
+ struct ata_device *dev;
- if (!gtm)
- return 0;
+ ata_link_for_each_dev(dev, &ap->link) {
+ unsigned long xfer_mask, udma_mask;
+
+ if (!ata_dev_enabled(dev))
+ continue;
+
+ xfer_mask = ata_acpi_gtm_xfermask(dev, gtm);
+ ata_unpack_xfermask(xfer_mask, NULL, NULL, &udma_mask);
+
+ if (udma_mask & ~ATA_UDMA_MASK_40C)
+ return 1;
+ }
- /* Split timing, DMA enabled */
- if ((gtm->flags & 0x11) == 0x11 && gtm->drive[0].dma < 55)
- valid |= 1;
- if ((gtm->flags & 0x14) == 0x14 && gtm->drive[1].dma < 55)
- valid |= 2;
- /* Shared timing, DMA enabled */
- if ((gtm->flags & 0x11) == 0x01 && gtm->drive[0].dma < 55)
- valid |= 1;
- if ((gtm->flags & 0x14) == 0x04 && gtm->drive[0].dma < 55)
- valid |= 2;
-
- /* Drive check */
- if ((valid & 1) && ata_dev_enabled(&ap->link.device[0]))
- return 1;
- if ((valid & 2) && ata_dev_enabled(&ap->link.device[1]))
- return 1;
return 0;
}
-
EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire);
static void ata_acpi_gtf_to_tf(struct ata_device *dev,
@@ -776,6 +813,36 @@ void ata_acpi_on_resume(struct ata_port *ap)
}
/**
+ * ata_acpi_set_state - set the port power state
+ * @ap: target ATA port
+ * @state: state, on/off
+ *
+ * This function executes the _PS0/_PS3 ACPI method to set the power state.
+ * ACPI spec requires _PS0 when IDE power on and _PS3 when power off
+ */
+void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
+{
+ struct ata_device *dev;
+
+ if (!ap->acpi_handle || (ap->flags & ATA_FLAG_ACPI_SATA))
+ return;
+
+ /* channel first and then drives for power on and vica versa
+ for power off */
+ if (state.event == PM_EVENT_ON)
+ acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0);
+
+ ata_link_for_each_dev(dev, &ap->link) {
+ if (dev->acpi_handle && ata_dev_enabled(dev))
+ acpi_bus_set_power(dev->acpi_handle,
+ state.event == PM_EVENT_ON ?
+ ACPI_STATE_D0 : ACPI_STATE_D3);
+ }
+ if (state.event != PM_EVENT_ON)
+ acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D3);
+}
+
+/**
* ata_acpi_on_devcfg - ATA ACPI hook called on device donfiguration
* @dev: target ATA device
*
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 6380726..ce803d1 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -119,6 +119,10 @@ int libata_noacpi = 0;
module_param_named(noacpi, libata_noacpi, int, 0444);
MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in probe/suspend/resume when set");
+int libata_allow_tpm = 0;
+module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
+MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands");
+
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
@@ -450,9 +454,9 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
* RETURNS:
* Packed xfer_mask.
*/
-static unsigned int ata_pack_xfermask(unsigned int pio_mask,
- unsigned int mwdma_mask,
- unsigned int udma_mask)
+unsigned long ata_pack_xfermask(unsigned long pio_mask,
+ unsigned long mwdma_mask,
+ unsigned long udma_mask)
{
return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) |
((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) |
@@ -469,10 +473,8 @@ static unsigned int ata_pack_xfermask(unsigned int pio_mask,
* Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask.
* Any NULL distination masks will be ignored.
*/
-static void ata_unpack_xfermask(unsigned int xfer_mask,
- unsigned int *pio_mask,
- unsigned int *mwdma_mask,
- unsigned int *udma_mask)
+void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask,
+ unsigned long *mwdma_mask, unsigned long *udma_mask)
{
if (pio_mask)
*pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO;
@@ -486,9 +488,9 @@ static const struct ata_xfer_ent {
int shift, bits;
u8 base;
} ata_xfer_tbl[] = {
- { ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 },
- { ATA_SHIFT_MWDMA, ATA_BITS_MWDMA, XFER_MW_DMA_0 },
- { ATA_SHIFT_UDMA, ATA_BITS_UDMA, XFER_UDMA_0 },
+ { ATA_SHIFT_PIO, ATA_NR_PIO_MODES, XFER_PIO_0 },
+ { ATA_SHIFT_MWDMA, ATA_NR_MWDMA_MODES, XFER_MW_DMA_0 },
+ { ATA_SHIFT_UDMA, ATA_NR_UDMA_MODES, XFER_UDMA_0 },
{ -1, },
};
@@ -503,9 +505,9 @@ static const struct ata_xfer_ent {
* None.
*
* RETURNS:
- * Matching XFER_* value, 0 if no match found.
+ * Matching XFER_* value, 0xff if no match found.
*/
-static u8 ata_xfer_mask2mode(unsigned int xfer_mask)
+u8 ata_xfer_mask2mode(unsigned long xfer_mask)
{
int highbit = fls(xfer_mask) - 1;
const struct ata_xfer_ent *ent;
@@ -513,7 +515,7 @@ static u8 ata_xfer_mask2mode(unsigned int xfer_mask)
for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
if (highbit >= ent->shift && highbit < ent->shift + ent->bits)
return ent->base + highbit - ent->shift;
- return 0;
+ return 0xff;
}
/**
@@ -528,13 +530,14 @@ static u8 ata_xfer_mask2mode(unsigned int xfer_mask)
* RETURNS:
* Matching xfer_mask, 0 if no match found.
*/
-static unsigned int ata_xfer_mode2mask(u8 xfer_mode)
+unsigned long ata_xfer_mode2mask(u8 xfer_mode)
{
const struct ata_xfer_ent *ent;
for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits)
- return 1 << (ent->shift + xfer_mode - ent->base);
+ return ((2 << (ent->shift + xfer_mode - ent->base)) - 1)
+ & ~((1 << ent->shift) - 1);
return 0;
}
@@ -550,7 +553,7 @@ static unsigned int ata_xfer_mode2mask(u8 xfer_mode)
* RETURNS:
* Matching xfer_shift, -1 if no match found.
*/
-static int ata_xfer_mode2shift(unsigned int xfer_mode)
+int ata_xfer_mode2shift(unsigned long xfer_mode)
{
const struct ata_xfer_ent *ent;
@@ -574,7 +577,7 @@ static int ata_xfer_mode2shift(unsigned int xfer_mode)
* Constant C string representing highest speed listed in
* @mode_mask, or the constant C string "<n/a>".
*/
-static const char *ata_mode_string(unsigned int xfer_mask)
+const char *ata_mode_string(unsigned long xfer_mask)
{
static const char * const xfer_mode_str[] = {
"PIO0",
@@ -947,8 +950,8 @@ unsigned int ata_dev_try_classify(struct ata_device *dev, int present,
if (r_err)
*r_err = err;
- /* see if device passed diags: if master then continue and warn later */
- if (err == 0 && dev->devno == 0)
+ /* see if device passed diags: continue and warn later */
+ if (err == 0)
/* diagnostic fail : do nothing _YET_ */
dev->horkage |= ATA_HORKAGE_DIAGNOSTIC;
else if (err == 1)
@@ -1286,48 +1289,6 @@ static int ata_hpa_resize(struct ata_device *dev)
}
/**
- * ata_id_to_dma_mode - Identify DMA mode from id block
- * @dev: device to identify
- * @unknown: mode to assume if we cannot tell
- *
- * Set up the timing values for the device based upon the identify
- * reported values for the DMA mode. This function is used by drivers
- * which rely upon firmware configured modes, but wish to report the
- * mode correctly when possible.
- *
- * In addition we emit similarly formatted messages to the default
- * ata_dev_set_mode handler, in order to provide consistency of
- * presentation.
- */
-
-void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown)
-{
- unsigned int mask;
- u8 mode;
-
- /* Pack the DMA modes */
- mask = ((dev->id[63] >> 8) << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA;
- if (dev->id[53] & 0x04)
- mask |= ((dev->id[88] >> 8) << ATA_SHIFT_UDMA) & ATA_MASK_UDMA;
-
- /* Select the mode in use */
- mode = ata_xfer_mask2mode(mask);
-
- if (mode != 0) {
- ata_dev_printk(dev, KERN_INFO, "configured for %s\n",
- ata_mode_string(mask));
- } else {
- /* SWDMA perhaps ? */
- mode = unknown;
- ata_dev_printk(dev, KERN_INFO, "configured for DMA\n");
- }
-
- /* Configure the device reporting */
- dev->xfer_mode = mode;
- dev->xfer_shift = ata_xfer_mode2shift(mode);
-}
-
-/**
* ata_noop_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
* @device: ATA device (numbered from zero) to select
@@ -1464,9 +1425,9 @@ static inline void ata_dump_id(const u16 *id)
* RETURNS:
* Computed xfermask
*/
-static unsigned int ata_id_xfermask(const u16 *id)
+unsigned long ata_id_xfermask(const u16 *id)
{
- unsigned int pio_mask, mwdma_mask, udma_mask;
+ unsigned long pio_mask, mwdma_mask, udma_mask;
/* Usual case. Word 53 indicates word 64 is valid */
if (id[ATA_ID_FIELD_VALID] & (1 << 1)) {
@@ -1519,7 +1480,7 @@ static unsigned int ata_id_xfermask(const u16 *id)
}
/**
- * ata_port_queue_task - Queue port_task
+ * ata_pio_queue_task - Queue port_task
* @ap: The ata_port to queue port_task for
* @fn: workqueue function to be scheduled
* @data: data for @fn to use
@@ -1531,16 +1492,15 @@ static unsigned int ata_id_xfermask(const u16 *id)
* one task is active at any given time.
*
* libata core layer takes care of synchronization between
- * port_task and EH. ata_port_queue_task() may be ignored for EH
+ * port_task and EH. ata_pio_queue_task() may be ignored for EH
* synchronization.
*
* LOCKING:
* Inherited from caller.
*/
-void ata_port_queue_task(struct ata_port *ap, work_func_t fn, void *data,
- unsigned long delay)
+static void ata_pio_queue_task(struct ata_port *ap, void *data,
+ unsigned long delay)
{
- PREPARE_DELAYED_WORK(&ap->port_task, fn);
ap->port_task_data = data;
/* may fail if ata_port_flush_task() in progress */
@@ -2090,7 +2050,7 @@ int ata_dev_configure(struct ata_device *dev)
struct ata_eh_context *ehc = &dev->link->eh_context;
int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
const u16 *id = dev->id;
- unsigned int xfer_mask;
+ unsigned long xfer_mask;
char revbuf[7]; /* XYZ-99\0 */
char fwrevbuf[ATA_ID_FW_REV_LEN+1];
char modelbuf[ATA_ID_PROD_LEN+1];
@@ -2161,8 +2121,14 @@ int ata_dev_configure(struct ata_device *dev)
"supports DRM functions and may "
"not be fully accessable.\n");
snprintf(revbuf, 7, "CFA");
- } else
+ } else {
snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id));
+ /* Warn the user if the device has TPM extensions */
+ if (ata_id_has_tpm(id))
+ ata_dev_printk(dev, KERN_WARNING,
+ "supports DRM functions and may "
+ "not be fully accessable.\n");
+ }
dev->n_sectors = ata_id_n_sectors(id);
@@ -2295,19 +2261,8 @@ int ata_dev_configure(struct ata_device *dev)
dev->flags |= ATA_DFLAG_DIPM;
}
- if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) {
- /* Let the user know. We don't want to disallow opens for
- rescue purposes, or in case the vendor is just a blithering
- idiot */
- if (print_info) {
- ata_dev_printk(dev, KERN_WARNING,
-"Drive reports diagnostics failure. This may indicate a drive\n");
- ata_dev_printk(dev, KERN_WARNING,
-"fault or invalid emulation. Contact drive vendor for information.\n");
- }
- }
-
- /* limit bridge transfers to udma5, 200 sectors */
+ /* Limit PATA drive on SATA cable bridge transfers to udma5,
+ 200 sectors */
if (ata_dev_knobble(dev)) {
if (ata_msg_drv(ap) && print_info)
ata_dev_printk(dev, KERN_INFO,
@@ -2336,6 +2291,21 @@ int ata_dev_configure(struct ata_device *dev)
if (ap->ops->dev_config)
ap->ops->dev_config(dev);
+ if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) {
+ /* Let the user know. We don't want to disallow opens for
+ rescue purposes, or in case the vendor is just a blithering
+ idiot. Do this after the dev_config call as some controllers
+ with buggy firmware may want to avoid reporting false device
+ bugs */
+
+ if (print_info) {
+ ata_dev_printk(dev, KERN_WARNING,
+"Drive reports diagnostics failure. This may indicate a drive\n");
+ ata_dev_printk(dev, KERN_WARNING,
+"fault or invalid emulation. Contact drive vendor for information.\n");
+ }
+ }
+
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n",
__FUNCTION__, ata_chk_status(ap));
@@ -2387,6 +2357,18 @@ int ata_cable_unknown(struct ata_port *ap)
}
/**
+ * ata_cable_ignore - return ignored PATA cable.
+ * @ap: port
+ *
+ * Helper method for drivers which don't use cable type to limit
+ * transfer mode.
+ */
+int ata_cable_ignore(struct ata_port *ap)
+{
+ return ATA_CBL_PATA_IGN;
+}
+
+/**
* ata_cable_sata - return SATA cable type
* @ap: port
*
@@ -2781,38 +2763,33 @@ int sata_set_spd(struct ata_link *link)
*/
static const struct ata_timing ata_timing[] = {
+/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */
+ { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
+ { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
+ { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
+ { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
+ { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
+ { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 },
+ { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 },
- { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
- { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
- { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
- { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
+ { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
+ { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
+ { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
- { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 },
+ { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
+ { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
+ { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
{ XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 },
- { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
- { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
- { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
+ { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 },
/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */
-
- { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
- { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
- { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
-
- { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
- { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
- { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
-
- { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 },
- { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 },
- { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
- { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
-
- { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
- { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
- { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
-
-/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */
+ { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
+ { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
+ { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
+ { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
+ { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
+ { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
+ { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
{ 0xFF }
};
@@ -2845,14 +2822,16 @@ void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma);
}
-static const struct ata_timing *ata_timing_find_mode(unsigned short speed)
+const struct ata_timing *ata_timing_find_mode(u8 xfer_mode)
{
- const struct ata_timing *t;
+ const struct ata_timing *t = ata_timing;
+
+ while (xfer_mode > t->mode)
+ t++;
- for (t = ata_timing; t->mode != speed; t++)
- if (t->mode == 0xFF)
- return NULL;
- return t;
+ if (xfer_mode == t->mode)
+ return t;
+ return NULL;
}
int ata_timing_compute(struct ata_device *adev, unsigned short speed,
@@ -2927,6 +2906,57 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
}
/**
+ * ata_timing_cycle2mode - find xfer mode for the specified cycle duration
+ * @xfer_shift: ATA_SHIFT_* value for transfer type to examine.
+ * @cycle: cycle duration in ns
+ *
+ * Return matching xfer mode for @cycle. The returned mode is of
+ * the transfer type specified by @xfer_shift. If @cycle is too
+ * slow for @xfer_shift, 0xff is returned. If @cycle is faster
+ * than the fastest known mode, the fasted mode is returned.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * Matching xfer_mode, 0xff if no match found.
+ */
+u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle)
+{
+ u8 base_mode = 0xff, last_mode = 0xff;
+ const struct ata_xfer_ent *ent;
+ const struct ata_timing *t;
+
+ for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
+ if (ent->shift == xfer_shift)
+ base_mode = ent->base;
+
+ for (t = ata_timing_find_mode(base_mode);
+ t && ata_xfer_mode2shift(t->mode) == xfer_shift; t++) {
+ unsigned short this_cycle;
+
+ switch (xfer_shift) {
+ case ATA_SHIFT_PIO:
+ case ATA_SHIFT_MWDMA:
+ this_cycle = t->cycle;
+ break;
+ case ATA_SHIFT_UDMA:
+ this_cycle = t->udma;
+ break;
+ default:
+ return 0xff;
+ }
+
+ if (cycle > this_cycle)
+ break;
+
+ last_mode = t->mode;
+ }
+
+ return last_mode;
+}
+
+/**
* ata_down_xfermask_limit - adjust dev xfer masks downward
* @dev: Device to adjust xfer masks
* @sel: ATA_DNXFER_* selector
@@ -2944,8 +2974,8 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel)
{
char buf[32];
- unsigned int orig_mask, xfer_mask;
- unsigned int pio_mask, mwdma_mask, udma_mask;
+ unsigned long orig_mask, xfer_mask;
+ unsigned long pio_mask, mwdma_mask, udma_mask;
int quiet, highbit;
quiet = !!(sel & ATA_DNXFER_QUIET);
@@ -3039,7 +3069,7 @@ static int ata_dev_set_mode(struct ata_device *dev)
/* Early MWDMA devices do DMA but don't allow DMA mode setting.
Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */
- if (dev->xfer_shift == ATA_SHIFT_MWDMA &&
+ if (dev->xfer_shift == ATA_SHIFT_MWDMA &&
dev->dma_mode == XFER_MW_DMA_0 &&
(dev->id[63] >> 8) & 1)
err_mask &= ~AC_ERR_DEV;
@@ -3089,7 +3119,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
/* step 1: calculate xfer_mask */
ata_link_for_each_dev(dev, link) {
- unsigned int pio_mask, dma_mask;
+ unsigned long pio_mask, dma_mask;
unsigned int mode_mask;
if (!ata_dev_enabled(dev))
@@ -3115,7 +3145,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
dev->dma_mode = ata_xfer_mask2mode(dma_mask);
found = 1;
- if (dev->dma_mode)
+ if (dev->dma_mode != 0xff)
used_dma = 1;
}
if (!found)
@@ -3126,7 +3156,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
if (!ata_dev_enabled(dev))
continue;
- if (!dev->pio_mode) {
+ if (dev->pio_mode == 0xff) {
ata_dev_printk(dev, KERN_WARNING, "no PIO support\n");
rc = -EINVAL;
goto out;
@@ -3140,7 +3170,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
/* step 3: set host DMA timings */
ata_link_for_each_dev(dev, link) {
- if (!ata_dev_enabled(dev) || !dev->dma_mode)
+ if (!ata_dev_enabled(dev) || dev->dma_mode == 0xff)
continue;
dev->xfer_mode = dev->dma_mode;
@@ -3173,31 +3203,6 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
}
/**
- * ata_set_mode - Program timings and issue SET FEATURES - XFER
- * @link: link on which timings will be programmed
- * @r_failed_dev: out paramter for failed device
- *
- * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If
- * ata_set_mode() fails, pointer to the failing device is
- * returned in @r_failed_dev.
- *
- * LOCKING:
- * PCI/etc. bus probe sem.
- *
- * RETURNS:
- * 0 on success, negative errno otherwise
- */
-int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
-{
- struct ata_port *ap = link->ap;
-
- /* has private set_mode? */
- if (ap->ops->set_mode)
- return ap->ops->set_mode(link, r_failed_dev);
- return ata_do_set_mode(link, r_failed_dev);
-}
-
-/**
* ata_tf_to_host - issue ATA taskfile to host controller
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
@@ -4363,7 +4368,14 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev)
tf.feature = SETFEATURES_XFER;
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_POLLING;
tf.protocol = ATA_PROT_NODATA;
- tf.nsect = dev->xfer_mode;
+ /* If we are using IORDY we must send the mode setting command */
+ if (ata_pio_need_iordy(dev))
+ tf.nsect = dev->xfer_mode;
+ /* If the device has IORDY and the controller does not - turn it off */
+ else if (ata_id_has_iordy(dev->id))
+ tf.nsect = 0x01;
+ else /* In the ancient relic department - skip all of this */
+ return 0;
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
@@ -4462,17 +4474,13 @@ static unsigned int ata_dev_init_params(struct ata_device *dev,
void ata_sg_clean(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- struct scatterlist *sg = qc->__sg;
+ struct scatterlist *sg = qc->sg;
int dir = qc->dma_dir;
void *pad_buf = NULL;
- WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP));
WARN_ON(sg == NULL);
- if (qc->flags & ATA_QCFLAG_SINGLE)
- WARN_ON(qc->n_elem > 1);
-
- VPRINTK("unmapping %u sg elements\n", qc->n_elem);
+ VPRINTK("unmapping %u sg elements\n", qc->mapped_n_elem);
/* if we padded the buffer out to 32-bit bound, and data
* xfer direction is from-device, we must copy from the
@@ -4481,31 +4489,20 @@ void ata_sg_clean(struct ata_queued_cmd *qc)
if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE))
pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
- if (qc->flags & ATA_QCFLAG_SG) {
- if (qc->n_elem)
- dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
- /* restore last sg */
- sg_last(sg, qc->orig_n_elem)->length += qc->pad_len;
- if (pad_buf) {
- struct scatterlist *psg = &qc->pad_sgent;
- void *addr = kmap_atomic(sg_page(psg), KM_IRQ0);
- memcpy(addr + psg->offset, pad_buf, qc->pad_len);
- kunmap_atomic(addr, KM_IRQ0);
- }
- } else {
- if (qc->n_elem)
- dma_unmap_single(ap->dev,
- sg_dma_address(&sg[0]), sg_dma_len(&sg[0]),
- dir);
- /* restore sg */
- sg->length += qc->pad_len;
- if (pad_buf)
- memcpy(qc->buf_virt + sg->length - qc->pad_len,
- pad_buf, qc->pad_len);
+ if (qc->mapped_n_elem)
+ dma_unmap_sg(ap->dev, sg, qc->mapped_n_elem, dir);
+ /* restore last sg */
+ if (qc->last_sg)
+ *qc->last_sg = qc->saved_last_sg;
+ if (pad_buf) {
+ struct scatterlist *psg = &qc->extra_sg[1];
+ void *addr = kmap_atomic(sg_page(psg), KM_IRQ0);
+ memcpy(addr + psg->offset, pad_buf, qc->pad_len);
+ kunmap_atomic(addr, KM_IRQ0);
}
qc->flags &= ~ATA_QCFLAG_DMAMAP;
- qc->__sg = NULL;
+ qc->sg = NULL;
}
/**
@@ -4523,13 +4520,10 @@ static void ata_fill_sg(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct scatterlist *sg;
- unsigned int idx;
+ unsigned int si, pi;
- WARN_ON(qc->__sg == NULL);
- WARN_ON(qc->n_elem == 0 && qc->pad_len == 0);
-
- idx = 0;
- ata_for_each_sg(sg, qc) {
+ pi = 0;
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
u32 addr, offset;
u32 sg_len, len;
@@ -4546,18 +4540,17 @@ static void ata_fill_sg(struct ata_queued_cmd *qc)
if ((offset + sg_len) > 0x10000)
len = 0x10000 - offset;
- ap->prd[idx].addr = cpu_to_le32(addr);
- ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff);
- VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
+ ap->prd[pi].addr = cpu_to_le32(addr);
+ ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
- idx++;
+ pi++;
sg_len -= len;
addr += len;
}
}
- if (idx)
- ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+ ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
}
/**
@@ -4577,13 +4570,10 @@ static void ata_fill_sg_dumb(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct scatterlist *sg;
- unsigned int idx;
-
- WARN_ON(qc->__sg == NULL);
- WARN_ON(qc->n_elem == 0 && qc->pad_len == 0);
+ unsigned int si, pi;
- idx = 0;
- ata_for_each_sg(sg, qc) {
+ pi = 0;
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
u32 addr, offset;
u32 sg_len, len, blen;
@@ -4601,25 +4591,24 @@ static void ata_fill_sg_dumb(struct ata_queued_cmd *qc)
len = 0x10000 - offset;
blen = len & 0xffff;
- ap->prd[idx].addr = cpu_to_le32(addr);
+ ap->prd[pi].addr = cpu_to_le32(addr);
if (blen == 0) {
/* Some PATA chipsets like the CS5530 can't
cope with 0x0000 meaning 64K as the spec says */
- ap->prd[idx].flags_len = cpu_to_le32(0x8000);
+ ap->prd[pi].flags_len = cpu_to_le32(0x8000);
blen = 0x8000;
- ap->prd[++idx].addr = cpu_to_le32(addr + 0x8000);
+ ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000);
}
- ap->prd[idx].flags_len = cpu_to_le32(blen);
- VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
+ ap->prd[pi].flags_len = cpu_to_le32(blen);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
- idx++;
+ pi++;
sg_len -= len;
addr += len;
}
}
- if (idx)
- ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+ ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
}
/**
@@ -4669,8 +4658,8 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc)
*/
static int atapi_qc_may_overflow(struct ata_queued_cmd *qc)
{
- if (qc->tf.protocol != ATA_PROT_ATAPI &&
- qc->tf.protocol != ATA_PROT_ATAPI_DMA)
+ if (qc->tf.protocol != ATAPI_PROT_PIO &&
+ qc->tf.protocol != ATAPI_PROT_DMA)
return 0;
if (qc->tf.flags & ATA_TFLAG_WRITE)
@@ -4756,33 +4745,6 @@ void ata_dumb_qc_prep(struct ata_queued_cmd *qc)
void ata_noop_qc_prep(struct ata_queued_cmd *qc) { }
/**
- * ata_sg_init_one - Associate command with memory buffer
- * @qc: Command to be associated
- * @buf: Memory buffer
- * @buflen: Length of memory buffer, in bytes.
- *
- * Initialize the data-related elements of queued_cmd @qc
- * to point to a single memory buffer, @buf of byte length @buflen.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-
-void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
-{
- qc->flags |= ATA_QCFLAG_SINGLE;
-
- qc->__sg = &qc->sgent;
- qc->n_elem = 1;
- qc->orig_n_elem = 1;
- qc->buf_virt = buf;
- qc->nbytes = buflen;
- qc->cursg = qc->__sg;
-
- sg_init_one(&qc->sgent, buf, buflen);
-}
-
-/**
* ata_sg_init - Associate command with scatter-gather table.
* @qc: Command to be associated
* @sg: Scatter-gather table.
@@ -4795,84 +4757,103 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
* LOCKING:
* spin_lock_irqsave(host lock)
*/
-
void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem)
{
- qc->flags |= ATA_QCFLAG_SG;
- qc->__sg = sg;
+ qc->sg = sg;
qc->n_elem = n_elem;
- qc->orig_n_elem = n_elem;
- qc->cursg = qc->__sg;
+ qc->cursg = qc->sg;
}
-/**
- * ata_sg_setup_one - DMA-map the memory buffer associated with a command.
- * @qc: Command with memory buffer to be mapped.
- *
- * DMA-map the memory buffer associated with queued_cmd @qc.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- *
- * RETURNS:
- * Zero on success, negative on error.
- */
-
-static int ata_sg_setup_one(struct ata_queued_cmd *qc)
+static unsigned int ata_sg_setup_extra(struct ata_queued_cmd *qc,
+ unsigned int *n_elem_extra,
+ unsigned int *nbytes_extra)
{
struct ata_port *ap = qc->ap;
- int dir = qc->dma_dir;
- struct scatterlist *sg = qc->__sg;
- dma_addr_t dma_address;
- int trim_sg = 0;
+ unsigned int n_elem = qc->n_elem;
+ struct scatterlist *lsg, *copy_lsg = NULL, *tsg = NULL, *esg = NULL;
+
+ *n_elem_extra = 0;
+ *nbytes_extra = 0;
+
+ /* needs padding? */
+ qc->pad_len = qc->nbytes & 3;
+
+ if (likely(!qc->pad_len))
+ return n_elem;
+
+ /* locate last sg and save it */
+ lsg = sg_last(qc->sg, n_elem);
+ qc->last_sg = lsg;
+ qc->saved_last_sg = *lsg;
+
+ sg_init_table(qc->extra_sg, ARRAY_SIZE(qc->extra_sg));
- /* we must lengthen transfers to end on a 32-bit boundary */
- qc->pad_len = sg->length & 3;
if (qc->pad_len) {
+ struct scatterlist *psg = &qc->extra_sg[1];
void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
- struct scatterlist *psg = &qc->pad_sgent;
+ unsigned int offset;
WARN_ON(qc->dev->class != ATA_DEV_ATAPI);
memset(pad_buf, 0, ATA_DMA_PAD_SZ);
- if (qc->tf.flags & ATA_TFLAG_WRITE)
- memcpy(pad_buf, qc->buf_virt + sg->length - qc->pad_len,
- qc->pad_len);
+ /* psg->page/offset are used to copy to-be-written
+ * data in this function or read data in ata_sg_clean.
+ */
+ offset = lsg->offset + lsg->length - qc->pad_len;
+ sg_set_page(psg, nth_page(sg_page(lsg), offset >> PAGE_SHIFT),
+ qc->pad_len, offset_in_page(offset));
+
+ if (qc->tf.flags & ATA_TFLAG_WRITE) {
+ void *addr = kmap_atomic(sg_page(psg), KM_IRQ0);
+ memcpy(pad_buf, addr + psg->offset, qc->pad_len);
+ kunmap_atomic(addr, KM_IRQ0);
+ }
sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ);
sg_dma_len(psg) = ATA_DMA_PAD_SZ;
- /* trim sg */
- sg->length -= qc->pad_len;
- if (sg->length == 0)
- trim_sg = 1;
- DPRINTK("padding done, sg->length=%u pad_len=%u\n",
- sg->length, qc->pad_len);
- }
+ /* Trim the last sg entry and chain the original and
+ * padding sg lists.
+ *
+ * Because chaining consumes one sg entry, one extra
+ * sg entry is allocated and the last sg entry is
+ * copied to it if the length isn't zero after padded
+ * amount is removed.
+ *
+ * If the last sg entry is completely replaced by
+ * padding sg entry, the first sg entry is skipped
+ * while chaining.
+ */
+ lsg->length -= qc->pad_len;
+ if (lsg->length) {
+ copy_lsg = &qc->extra_sg[0];
+ tsg = &qc->extra_sg[0];
+ } else {
+ n_elem--;
+ tsg = &qc->extra_sg[1];
+ }
- if (trim_sg) {
- qc->n_elem--;
- goto skip_map;
- }
+ esg = &qc->extra_sg[1];
- dma_address = dma_map_single(ap->dev, qc->buf_virt,
- sg->length, dir);
- if (dma_mapping_error(dma_address)) {
- /* restore sg */
- sg->length += qc->pad_len;
- return -1;
+ (*n_elem_extra)++;
+ (*nbytes_extra) += 4 - qc->pad_len;
}
- sg_dma_address(sg) = dma_address;
- sg_dma_len(sg) = sg->length;
+ if (copy_lsg)
+ sg_set_page(copy_lsg, sg_page(lsg), lsg->length, lsg->offset);
-skip_map:
- DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg),
- qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
+ sg_chain(lsg, 1, tsg);
+ sg_mark_end(esg);
- return 0;
+ /* sglist can't start with chaining sg entry, fast forward */
+ if (qc->sg == lsg) {
+ qc->sg = tsg;
+ qc->cursg = tsg;
+ }
+
+ return n_elem;
}
/**
@@ -4888,75 +4869,30 @@ skip_map:
* Zero on success, negative on error.
*
*/
-
static int ata_sg_setup(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- struct scatterlist *sg = qc->__sg;
- struct scatterlist *lsg = sg_last(qc->__sg, qc->n_elem);
- int n_elem, pre_n_elem, dir, trim_sg = 0;
+ unsigned int n_elem, n_elem_extra, nbytes_extra;
VPRINTK("ENTER, ata%u\n", ap->print_id);
- WARN_ON(!(qc->flags & ATA_QCFLAG_SG));
- /* we must lengthen transfers to end on a 32-bit boundary */
- qc->pad_len = lsg->length & 3;
- if (qc->pad_len) {
- void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
- struct scatterlist *psg = &qc->pad_sgent;
- unsigned int offset;
-
- WARN_ON(qc->dev->class != ATA_DEV_ATAPI);
+ n_elem = ata_sg_setup_extra(qc, &n_elem_extra, &nbytes_extra);
- memset(pad_buf, 0, ATA_DMA_PAD_SZ);
-
- /*
- * psg->page/offset are used to copy to-be-written
- * data in this function or read data in ata_sg_clean.
- */
- offset = lsg->offset + lsg->length - qc->pad_len;
- sg_init_table(psg, 1);
- sg_set_page(psg, nth_page(sg_page(lsg), offset >> PAGE_SHIFT),
- qc->pad_len, offset_in_page(offset));
-
- if (qc->tf.flags & ATA_TFLAG_WRITE) {
- void *addr = kmap_atomic(sg_page(psg), KM_IRQ0);
- memcpy(pad_buf, addr + psg->offset, qc->pad_len);
- kunmap_atomic(addr, KM_IRQ0);
+ if (n_elem) {
+ n_elem = dma_map_sg(ap->dev, qc->sg, n_elem, qc->dma_dir);
+ if (n_elem < 1) {
+ /* restore last sg */
+ if (qc->last_sg)
+ *qc->last_sg = qc->saved_last_sg;
+ return -1;
}
-
- sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ);
- sg_dma_len(psg) = ATA_DMA_PAD_SZ;
- /* trim last sg */
- lsg->length -= qc->pad_len;
- if (lsg->length == 0)
- trim_sg = 1;
-
- DPRINTK("padding done, sg[%d].length=%u pad_len=%u\n",
- qc->n_elem - 1, lsg->length, qc->pad_len);
- }
-
- pre_n_elem = qc->n_elem;
- if (trim_sg && pre_n_elem)
- pre_n_elem--;
-
- if (!pre_n_elem) {
- n_elem = 0;
- goto skip_map;
- }
-
- dir = qc->dma_dir;
- n_elem = dma_map_sg(ap->dev, sg, pre_n_elem, dir);
- if (n_elem < 1) {
- /* restore last sg */
- lsg->length += qc->pad_len;
- return -1;
+ DPRINTK("%d sg elements mapped\n", n_elem);
}
- DPRINTK("%d sg elements mapped\n", n_elem);
-
-skip_map:
- qc->n_elem = n_elem;
+ qc->n_elem = qc->mapped_n_elem = n_elem;
+ qc->n_elem += n_elem_extra;
+ qc->nbytes += nbytes_extra;
+ qc->flags |= ATA_QCFLAG_DMAMAP;
return 0;
}
@@ -4985,7 +4921,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
/**
* ata_data_xfer - Transfer data by PIO
- * @adev: device to target
+ * @dev: device to target
* @buf: data buffer
* @buflen: buffer length
* @write_data: read/write
@@ -4994,37 +4930,44 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
*
* LOCKING:
* Inherited from caller.
+ *
+ * RETURNS:
+ * Bytes consumed.
*/
-void ata_data_xfer(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
+unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf,
+ unsigned int buflen, int rw)
{
- struct ata_port *ap = adev->link->ap;
+ struct ata_port *ap = dev->link->ap;
+ void __iomem *data_addr = ap->ioaddr.data_addr;
unsigned int words = buflen >> 1;
/* Transfer multiple of 2 bytes */
- if (write_data)
- iowrite16_rep(ap->ioaddr.data_addr, buf, words);
+ if (rw == READ)
+ ioread16_rep(data_addr, buf, words);
else
- ioread16_rep(ap->ioaddr.data_addr, buf, words);
+ iowrite16_rep(data_addr, buf, words);
/* Transfer trailing 1 byte, if any. */
if (unlikely(buflen & 0x01)) {
- u16 align_buf[1] = { 0 };
+ __le16 align_buf[1] = { 0 };
unsigned char *trailing_buf = buf + buflen - 1;
- if (write_data) {
- memcpy(align_buf, trailing_buf, 1);
- iowrite16(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr);
- } else {
- align_buf[0] = cpu_to_le16(ioread16(ap->ioaddr.data_addr));
+ if (rw == READ) {
+ align_buf[0] = cpu_to_le16(ioread16(data_addr));
memcpy(trailing_buf, align_buf, 1);
+ } else {
+ memcpy(align_buf, trailing_buf, 1);
+ iowrite16(le16_to_cpu(align_buf[0]), data_addr);
}
+ words++;
}
+
+ return words << 1;
}
/**
* ata_data_xfer_noirq - Transfer data by PIO
- * @adev: device to target
+ * @dev: device to target
* @buf: data buffer
* @buflen: buffer length
* @write_data: read/write
@@ -5034,14 +4977,21 @@ void ata_data_xfer(struct ata_device *adev, unsigned char *buf,
*
* LOCKING:
* Inherited from caller.
+ *
+ * RETURNS:
+ * Bytes consumed.
*/
-void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
+unsigned int ata_data_xfer_noirq(struct ata_device *dev, unsigned char *buf,
+ unsigned int buflen, int rw)
{
unsigned long flags;
+ unsigned int consumed;
+
local_irq_save(flags);
- ata_data_xfer(adev, buf, buflen, write_data);
+ consumed = ata_data_xfer(dev, buf, buflen, rw);
local_irq_restore(flags);
+
+ return consumed;
}
@@ -5152,13 +5102,13 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
ata_altstatus(ap); /* flush */
switch (qc->tf.protocol) {
- case ATA_PROT_ATAPI:
+ case ATAPI_PROT_PIO:
ap->hsm_task_state = HSM_ST;
break;
- case ATA_PROT_ATAPI_NODATA:
+ case ATAPI_PROT_NODATA:
ap->hsm_task_state = HSM_ST_LAST;
break;
- case ATA_PROT_ATAPI_DMA:
+ case ATAPI_PROT_DMA:
ap->hsm_task_state = HSM_ST_LAST;
/* initiate bmdma */
ap->ops->bmdma_start(qc);
@@ -5300,12 +5250,15 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc)
bytes = (bc_hi << 8) | bc_lo;
/* shall be cleared to zero, indicating xfer of data */
- if (ireason & (1 << 0))
+ if (unlikely(ireason & (1 << 0)))
goto err_out;
/* make sure transfer direction matches expected */
i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0;
- if (do_write != i_write)
+ if (unlikely(do_write != i_write))
+ goto err_out;
+
+ if (unlikely(!bytes))
goto err_out;
VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes);
@@ -5341,7 +5294,7 @@ static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *q
(qc->tf.flags & ATA_TFLAG_WRITE))
return 1;
- if (is_atapi_taskfile(&qc->tf) &&
+ if (ata_is_atapi(qc->tf.protocol) &&
!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
return 1;
}
@@ -5506,7 +5459,7 @@ fsm_start:
case HSM_ST:
/* complete command or read/write the data register */
- if (qc->tf.protocol == ATA_PROT_ATAPI) {
+ if (qc->tf.protocol == ATAPI_PROT_PIO) {
/* ATAPI PIO protocol */
if ((status & ATA_DRQ) == 0) {
/* No more data to transfer or device error.
@@ -5664,7 +5617,7 @@ fsm_start:
msleep(2);
status = ata_busy_wait(ap, ATA_BUSY, 10);
if (status & ATA_BUSY) {
- ata_port_queue_task(ap, ata_pio_task, qc, ATA_SHORT_PAUSE);
+ ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE);
return;
}
}
@@ -5805,6 +5758,22 @@ static void fill_result_tf(struct ata_queued_cmd *qc)
ap->ops->tf_read(ap, &qc->result_tf);
}
+static void ata_verify_xfer(struct ata_queued_cmd *qc)
+{
+ struct ata_device *dev = qc->dev;
+
+ if (ata_tag_internal(qc->tag))
+ return;
+
+ if (ata_is_nodata(qc->tf.protocol))
+ return;
+
+ if ((dev->mwdma_mask || dev->udma_mask) && ata_is_pio(qc->tf.protocol))
+ return;
+
+ dev->flags &= ~ATA_DFLAG_DUBIOUS_XFER;
+}
+
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
@@ -5876,6 +5845,9 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
break;
}
+ if (unlikely(dev->flags & ATA_DFLAG_DUBIOUS_XFER))
+ ata_verify_xfer(qc);
+
__ata_qc_complete(qc);
} else {
if (qc->flags & ATA_QCFLAG_EH_SCHEDULED)
@@ -5938,30 +5910,6 @@ int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active,
return nr_done;
}
-static inline int ata_should_dma_map(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
-
- switch (qc->tf.protocol) {
- case ATA_PROT_NCQ:
- case ATA_PROT_DMA:
- case ATA_PROT_ATAPI_DMA:
- return 1;
-
- case ATA_PROT_ATAPI:
- case ATA_PROT_PIO:
- if (ap->flags & ATA_FLAG_PIO_DMA)
- return 1;
-
- /* fall through */
-
- default:
- return 0;
- }
-
- /* never reached */
-}
-
/**
* ata_qc_issue - issue taskfile to device
* @qc: command to issue to device
@@ -5978,6 +5926,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_link *link = qc->dev->link;
+ u8 prot = qc->tf.protocol;
/* Make sure only one non-NCQ command is outstanding. The
* check is skipped for old EH because it reuses active qc to
@@ -5985,7 +5934,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
*/
WARN_ON(ap->ops->error_handler && ata_tag_valid(link->active_tag));
- if (qc->tf.protocol == ATA_PROT_NCQ) {
+ if (ata_is_ncq(prot)) {
WARN_ON(link->sactive & (1 << qc->tag));
if (!link->sactive)
@@ -6001,17 +5950,18 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
qc->flags |= ATA_QCFLAG_ACTIVE;
ap->qc_active |= 1 << qc->tag;
- if (ata_should_dma_map(qc)) {
- if (qc->flags & ATA_QCFLAG_SG) {
- if (ata_sg_setup(qc))
- goto sg_err;
- } else if (qc->flags & ATA_QCFLAG_SINGLE) {
- if (ata_sg_setup_one(qc))
- goto sg_err;
- }
- } else {
- qc->flags &= ~ATA_QCFLAG_DMAMAP;
- }
+ /* We guarantee to LLDs that they will have at least one
+ * non-zero sg if the command is a data command.
+ */
+ BUG_ON(ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes));
+
+ /* ata_sg_setup() may update nbytes */
+ qc->raw_nbytes = qc->nbytes;
+
+ if (ata_is_dma(prot) || (ata_is_pio(prot) &&
+ (ap->flags & ATA_FLAG_PIO_DMA)))
+ if (ata_sg_setup(qc))
+ goto sg_err;
/* if device is sleeping, schedule softreset and abort the link */
if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) {
@@ -6029,7 +5979,6 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
return;
sg_err:
- qc->flags &= ~ATA_QCFLAG_DMAMAP;
qc->err_mask |= AC_ERR_SYSTEM;
err:
ata_qc_complete(qc);
@@ -6064,11 +6013,11 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
switch (qc->tf.protocol) {
case ATA_PROT_PIO:
case ATA_PROT_NODATA:
- case ATA_PROT_ATAPI:
- case ATA_PROT_ATAPI_NODATA:
+ case ATAPI_PROT_PIO:
+ case ATAPI_PROT_NODATA:
qc->tf.flags |= ATA_TFLAG_POLLING;
break;
- case ATA_PROT_ATAPI_DMA:
+ case ATAPI_PROT_DMA:
if (qc->dev->flags & ATA_DFLAG_CDB_INTR)
/* see ata_dma_blacklisted() */
BUG();
@@ -6091,7 +6040,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
ap->hsm_task_state = HSM_ST_LAST;
if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_port_queue_task(ap, ata_pio_task, qc, 0);
+ ata_pio_queue_task(ap, qc, 0);
break;
@@ -6113,7 +6062,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
if (qc->tf.flags & ATA_TFLAG_WRITE) {
/* PIO data out protocol */
ap->hsm_task_state = HSM_ST_FIRST;
- ata_port_queue_task(ap, ata_pio_task, qc, 0);
+ ata_pio_queue_task(ap, qc, 0);
/* always send first data block using
* the ata_pio_task() codepath.
@@ -6123,7 +6072,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
ap->hsm_task_state = HSM_ST;
if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_port_queue_task(ap, ata_pio_task, qc, 0);
+ ata_pio_queue_task(ap, qc, 0);
/* if polling, ata_pio_task() handles the rest.
* otherwise, interrupt handler takes over from here.
@@ -6132,8 +6081,8 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
break;
- case ATA_PROT_ATAPI:
- case ATA_PROT_ATAPI_NODATA:
+ case ATAPI_PROT_PIO:
+ case ATAPI_PROT_NODATA:
if (qc->tf.flags & ATA_TFLAG_POLLING)
ata_qc_set_polling(qc);
@@ -6144,10 +6093,10 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
/* send cdb by polling if no cdb interrupt */
if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
(qc->tf.flags & ATA_TFLAG_POLLING))
- ata_port_queue_task(ap, ata_pio_task, qc, 0);
+ ata_pio_queue_task(ap, qc, 0);
break;
- case ATA_PROT_ATAPI_DMA:
+ case ATAPI_PROT_DMA:
WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
@@ -6156,7 +6105,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
/* send cdb by polling if no cdb interrupt */
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
- ata_port_queue_task(ap, ata_pio_task, qc, 0);
+ ata_pio_queue_task(ap, qc, 0);
break;
default:
@@ -6200,15 +6149,15 @@ inline unsigned int ata_host_intr(struct ata_port *ap,
*/
/* Check the ATA_DFLAG_CDB_INTR flag is enough here.
- * The flag was turned on only for atapi devices.
- * No need to check is_atapi_taskfile(&qc->tf) again.
+ * The flag was turned on only for atapi devices. No
+ * need to check ata_is_atapi(qc->tf.protocol) again.
*/
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
goto idle_irq;
break;
case HSM_ST_LAST:
if (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
+ qc->tf.protocol == ATAPI_PROT_DMA) {
/* check status of DMA engine */
host_stat = ap->ops->bmdma_status(ap);
VPRINTK("ata%u: host_stat 0x%X\n",
@@ -6250,7 +6199,7 @@ inline unsigned int ata_host_intr(struct ata_port *ap,
ata_hsm_move(ap, qc, status, 0);
if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATA_PROT_ATAPI_DMA))
+ qc->tf.protocol == ATAPI_PROT_DMA))
ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
return 1; /* irq handled */
@@ -6772,7 +6721,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host)
ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN;
#endif
- INIT_DELAYED_WORK(&ap->port_task, NULL);
+ INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
INIT_LIST_HEAD(&ap->eh_done_q);
@@ -7589,7 +7538,6 @@ EXPORT_SYMBOL_GPL(ata_host_register);
EXPORT_SYMBOL_GPL(ata_host_activate);
EXPORT_SYMBOL_GPL(ata_host_detach);
EXPORT_SYMBOL_GPL(ata_sg_init);
-EXPORT_SYMBOL_GPL(ata_sg_init_one);
EXPORT_SYMBOL_GPL(ata_hsm_move);
EXPORT_SYMBOL_GPL(ata_qc_complete);
EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
@@ -7601,6 +7549,13 @@ EXPORT_SYMBOL_GPL(ata_std_dev_select);
EXPORT_SYMBOL_GPL(sata_print_link_status);
EXPORT_SYMBOL_GPL(ata_tf_to_fis);
EXPORT_SYMBOL_GPL(ata_tf_from_fis);
+EXPORT_SYMBOL_GPL(ata_pack_xfermask);
+EXPORT_SYMBOL_GPL(ata_unpack_xfermask);
+EXPORT_SYMBOL_GPL(ata_xfer_mask2mode);
+EXPORT_SYMBOL_GPL(ata_xfer_mode2mask);
+EXPORT_SYMBOL_GPL(ata_xfer_mode2shift);
+EXPORT_SYMBOL_GPL(ata_mode_string);
+EXPORT_SYMBOL_GPL(ata_id_xfermask);
EXPORT_SYMBOL_GPL(ata_check_status);
EXPORT_SYMBOL_GPL(ata_altstatus);
EXPORT_SYMBOL_GPL(ata_exec_command);
@@ -7643,7 +7598,6 @@ EXPORT_SYMBOL_GPL(ata_wait_register);
EXPORT_SYMBOL_GPL(ata_busy_sleep);
EXPORT_SYMBOL_GPL(ata_wait_after_reset);
EXPORT_SYMBOL_GPL(ata_wait_ready);
-EXPORT_SYMBOL_GPL(ata_port_queue_task);
EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
@@ -7662,18 +7616,20 @@ EXPORT_SYMBOL_GPL(ata_host_resume);
#endif /* CONFIG_PM */
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
-EXPORT_SYMBOL_GPL(ata_id_to_dma_mode);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
+EXPORT_SYMBOL_GPL(ata_timing_find_mode);
EXPORT_SYMBOL_GPL(ata_timing_compute);
EXPORT_SYMBOL_GPL(ata_timing_merge);
+EXPORT_SYMBOL_GPL(ata_timing_cycle2mode);
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(pci_test_config_bits);
EXPORT_SYMBOL_GPL(ata_pci_init_sff_host);
EXPORT_SYMBOL_GPL(ata_pci_init_bmdma);
EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host);
+EXPORT_SYMBOL_GPL(ata_pci_activate_sff_host);
EXPORT_SYMBOL_GPL(ata_pci_init_one);
EXPORT_SYMBOL_GPL(ata_pci_remove_one);
#ifdef CONFIG_PM
@@ -7715,4 +7671,5 @@ EXPORT_SYMBOL_GPL(ata_dev_try_classify);
EXPORT_SYMBOL_GPL(ata_cable_40wire);
EXPORT_SYMBOL_GPL(ata_cable_80wire);
EXPORT_SYMBOL_GPL(ata_cable_unknown);
+EXPORT_SYMBOL_GPL(ata_cable_ignore);
EXPORT_SYMBOL_GPL(ata_cable_sata);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 21a81cd..4e31071 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -46,9 +46,26 @@
#include "libata.h"
enum {
+ /* speed down verdicts */
ATA_EH_SPDN_NCQ_OFF = (1 << 0),
ATA_EH_SPDN_SPEED_DOWN = (1 << 1),
ATA_EH_SPDN_FALLBACK_TO_PIO = (1 << 2),
+ ATA_EH_SPDN_KEEP_ERRORS = (1 << 3),
+
+ /* error flags */
+ ATA_EFLAG_IS_IO = (1 << 0),
+ ATA_EFLAG_DUBIOUS_XFER = (1 << 1),
+
+ /* error categories */
+ ATA_ECAT_NONE = 0,
+ ATA_ECAT_ATA_BUS = 1,
+ ATA_ECAT_TOUT_HSM = 2,
+ ATA_ECAT_UNK_DEV = 3,
+ ATA_ECAT_DUBIOUS_NONE = 4,
+ ATA_ECAT_DUBIOUS_ATA_BUS = 5,
+ ATA_ECAT_DUBIOUS_TOUT_HSM = 6,
+ ATA_ECAT_DUBIOUS_UNK_DEV = 7,
+ ATA_ECAT_NR = 8,
};
/* Waiting in ->prereset can never be reliable. It's sometimes nice
@@ -213,12 +230,13 @@ void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
if (offset < 0)
ata_port_desc(ap, "%s %s%llu@...llx", name, type, len, start);
else
- ata_port_desc(ap, "%s 0x%llx", name, start + offset);
+ ata_port_desc(ap, "%s 0x%llx", name,
+ start + (unsigned long long)offset);
}
#endif /* CONFIG_PCI */
-static void ata_ering_record(struct ata_ering *ering, int is_io,
+static void ata_ering_record(struct ata_ering *ering, unsigned int eflags,
unsigned int err_mask)
{
struct ata_ering_entry *ent;
@@ -229,11 +247,20 @@ static void ata_ering_record(struct ata_ering *ering, int is_io,
ering->cursor %= ATA_ERING_SIZE;
ent = &ering->ring[ering->cursor];
- ent->is_io = is_io;
+ ent->eflags = eflags;
ent->err_mask = err_mask;
ent->timestamp = get_jiffies_64();
}
+static struct ata_ering_entry *ata_ering_top(struct ata_ering *ering)
+{
+ struct ata_ering_entry *ent = &ering->ring[ering->cursor];
+
+ if (ent->err_mask)
+ return ent;
+ return NULL;
+}
+
static void ata_ering_clear(struct ata_ering *ering)
{
memset(ering, 0, sizeof(*ering));
@@ -445,9 +472,20 @@ void ata_scsi_error(struct Scsi_Host *host)
spin_lock_irqsave(ap->lock, flags);
__ata_port_for_each_link(link, ap) {
+ struct ata_eh_context *ehc = &link->eh_context;
+ struct ata_device *dev;
+
memset(&link->eh_context, 0, sizeof(link->eh_context));
link->eh_context.i = link->eh_info;
memset(&link->eh_info, 0, sizeof(link->eh_info));
+
+ ata_link_for_each_dev(dev, link) {
+ int devno = dev->devno;
+
+ ehc->saved_xfer_mode[devno] = dev->xfer_mode;
+ if (ata_ncq_enabled(dev))
+ ehc->saved_ncq_enabled |= 1 << devno;
+ }
}
ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS;
@@ -1260,10 +1298,10 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc)
/* is it pointless to prefer PIO for "safety reasons"? */
if (ap->flags & ATA_FLAG_PIO_DMA) {
- tf.protocol = ATA_PROT_ATAPI_DMA;
+ tf.protocol = ATAPI_PROT_DMA;
tf.feature |= ATAPI_PKT_DMA;
} else {
- tf.protocol = ATA_PROT_ATAPI;
+ tf.protocol = ATAPI_PROT_PIO;
tf.lbam = SCSI_SENSE_BUFFERSIZE;
tf.lbah = 0;
}
@@ -1451,20 +1489,29 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
return action;
}
-static int ata_eh_categorize_error(int is_io, unsigned int err_mask)
+static int ata_eh_categorize_error(unsigned int eflags, unsigned int err_mask,
+ int *xfer_ok)
{
+ int base = 0;
+
+ if (!(eflags & ATA_EFLAG_DUBIOUS_XFER))
+ *xfer_ok = 1;
+
+ if (!*xfer_ok)
+ base = ATA_ECAT_DUBIOUS_NONE;
+
if (err_mask & AC_ERR_ATA_BUS)
- return 1;
+ return base + ATA_ECAT_ATA_BUS;
if (err_mask & AC_ERR_TIMEOUT)
- return 2;
+ return base + ATA_ECAT_TOUT_HSM;
- if (is_io) {
+ if (eflags & ATA_EFLAG_IS_IO) {
if (err_mask & AC_ERR_HSM)
- return 2;
+ return base + ATA_ECAT_TOUT_HSM;
if ((err_mask &
(AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV)
- return 3;
+ return base + ATA_ECAT_UNK_DEV;
}
return 0;
@@ -1472,18 +1519,22 @@ static int ata_eh_categorize_error(int is_io, unsigned int err_mask)
struct speed_down_verdict_arg {
u64 since;
- int nr_errors[4];
+ int xfer_ok;
+ int nr_errors[ATA_ECAT_NR];
};
static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg)
{
struct speed_down_verdict_arg *arg = void_arg;
- int cat = ata_eh_categorize_error(ent->is_io, ent->err_mask);
+ int cat;
if (ent->timestamp < arg->since)
return -1;
+ cat = ata_eh_categorize_error(ent->eflags, ent->err_mask,
+ &arg->xfer_ok);
arg->nr_errors[cat]++;
+
return 0;
}
@@ -1495,22 +1546,48 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg)
* whether NCQ needs to be turned off, transfer speed should be
* stepped down, or falling back to PIO is necessary.
*
- * Cat-1 is ATA_BUS error for any command.
+ * ECAT_ATA_BUS : ATA_BUS error for any command
+ *
+ * ECAT_TOUT_HSM : TIMEOUT for any command or HSM violation for
+ * IO commands
+ *
+ * ECAT_UNK_DEV : Unknown DEV error for IO commands
+ *
+ * ECAT_DUBIOUS_* : Identical to above three but occurred while
+ * data transfer hasn't been verified.
+ *
+ * Verdicts are
+ *
+ * NCQ_OFF : Turn off NCQ.
+ *
+ * SPEED_DOWN : Speed down transfer speed but don't fall back
+ * to PIO.
+ *
+ * FALLBACK_TO_PIO : Fall back to PIO.
+ *
+ * Even if multiple verdicts are returned, only one action is
+ * taken per error. An action triggered by non-DUBIOUS errors
+ * clears ering, while one triggered by DUBIOUS_* errors doesn't.
+ * This is to expedite speed down decisions right after device is
+ * initially configured.
*
- * Cat-2 is TIMEOUT for any command or HSM violation for known
- * supported commands.
+ * The followings are speed down rules. #1 and #2 deal with
+ * DUBIOUS errors.
*
- * Cat-3 is is unclassified DEV error for known supported
- * command.
+ * 1. If more than one DUBIOUS_ATA_BUS or DUBIOUS_TOUT_HSM errors
+ * occurred during last 5 mins, SPEED_DOWN and FALLBACK_TO_PIO.
*
- * NCQ needs to be turned off if there have been more than 3
- * Cat-2 + Cat-3 errors during last 10 minutes.
+ * 2. If more than one DUBIOUS_TOUT_HSM or DUBIOUS_UNK_DEV errors
+ * occurred during last 5 mins, NCQ_OFF.
*
- * Speed down is necessary if there have been more than 3 Cat-1 +
- * Cat-2 errors or 10 Cat-3 errors during last 10 minutes.
+ * 3. If more than 8 ATA_BUS, TOUT_HSM or UNK_DEV errors
+ * ocurred during last 5 mins, FALLBACK_TO_PIO
*
- * Falling back to PIO mode is necessary if there have been more
- * than 10 Cat-1 + Cat-2 + Cat-3 errors during last 5 minutes.
+ * 4. If more than 3 TOUT_HSM or UNK_DEV errors occurred
+ * during last 10 mins, NCQ_OFF.
+ *
+ * 5. If more than 3 ATA_BUS or TOUT_HSM errors, or more than 6
+ * UNK_DEV errors occurred during last 10 mins, SPEED_DOWN.
*
* LOCKING:
* Inherited from caller.
@@ -1525,23 +1602,38 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev)
struct speed_down_verdict_arg arg;
unsigned int verdict = 0;
- /* scan past 10 mins of error history */
+ /* scan past 5 mins of error history */
memset(&arg, 0, sizeof(arg));
- arg.since = j64 - min(j64, j10mins);
+ arg.since = j64 - min(j64, j5mins);
ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg);
- if (arg.nr_errors[2] + arg.nr_errors[3] > 3)
- verdict |= ATA_EH_SPDN_NCQ_OFF;
- if (arg.nr_errors[1] + arg.nr_errors[2] > 3 || arg.nr_errors[3] > 10)
- verdict |= ATA_EH_SPDN_SPEED_DOWN;
+ if (arg.nr_errors[ATA_ECAT_DUBIOUS_ATA_BUS] +
+ arg.nr_errors[ATA_ECAT_DUBIOUS_TOUT_HSM] > 1)
+ verdict |= ATA_EH_SPDN_SPEED_DOWN |
+ ATA_EH_SPDN_FALLBACK_TO_PIO | ATA_EH_SPDN_KEEP_ERRORS;
- /* scan past 3 mins of error history */
+ if (arg.nr_errors[ATA_ECAT_DUBIOUS_TOUT_HSM] +
+ arg.nr_errors[ATA_ECAT_DUBIOUS_UNK_DEV] > 1)
+ verdict |= ATA_EH_SPDN_NCQ_OFF | ATA_EH_SPDN_KEEP_ERRORS;
+
+ if (arg.nr_errors[ATA_ECAT_ATA_BUS] +
+ arg.nr_errors[ATA_ECAT_TOUT_HSM] +
+ arg.nr_errors[ATA_ECAT_UNK_DEV] > 6)
+ verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO;
+
+ /* scan past 10 mins of error history */
memset(&arg, 0, sizeof(arg));
- arg.since = j64 - min(j64, j5mins);
+ arg.since = j64 - min(j64, j10mins);
ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg);
- if (arg.nr_errors[1] + arg.nr_errors[2] + arg.nr_errors[3] > 10)
- verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO;
+ if (arg.nr_errors[ATA_ECAT_TOUT_HSM] +
+ arg.nr_errors[ATA_ECAT_UNK_DEV] > 3)
+ verdict |= ATA_EH_SPDN_NCQ_OFF;
+
+ if (arg.nr_errors[ATA_ECAT_ATA_BUS] +
+ arg.nr_errors[ATA_ECAT_TOUT_HSM] > 3 ||
+ arg.nr_errors[ATA_ECAT_UNK_DEV] > 6)
+ verdict |= ATA_EH_SPDN_SPEED_DOWN;
return verdict;
}
@@ -1549,7 +1641,7 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev)
/**
* ata_eh_speed_down - record error and speed down if necessary
* @dev: Failed device
- * @is_io: Did the device fail during normal IO?
+ * @eflags: mask of ATA_EFLAG_* flags
* @err_mask: err_mask of the error
*
* Record error and examine error history to determine whether
@@ -1563,18 +1655,20 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev)
* RETURNS:
* Determined recovery action.
*/
-static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io,
- unsigned int err_mask)
+static unsigned int ata_eh_speed_down(struct ata_device *dev,
+ unsigned int eflags, unsigned int err_mask)
{
+ struct ata_link *link = dev->link;
+ int xfer_ok = 0;
unsigned int verdict;
unsigned int action = 0;
/* don't bother if Cat-0 error */
- if (ata_eh_categorize_error(is_io, err_mask) == 0)
+ if (ata_eh_categorize_error(eflags, err_mask, &xfer_ok) == 0)
return 0;
/* record error and determine whether speed down is necessary */
- ata_ering_record(&dev->ering, is_io, err_mask);
+ ata_ering_record(&dev->ering, eflags, err_mask);
verdict = ata_eh_speed_down_verdict(dev);
/* turn off NCQ? */
@@ -1590,7 +1684,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io,
/* speed down? */
if (verdict & ATA_EH_SPDN_SPEED_DOWN) {
/* speed down SATA link speed if possible */
- if (sata_down_spd_limit(dev->link) == 0) {
+ if (sata_down_spd_limit(link) == 0) {
action |= ATA_EH_HARDRESET;
goto done;
}
@@ -1618,10 +1712,10 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io,
}
/* Fall back to PIO? Slowing down to PIO is meaningless for
- * SATA. Consider it only for PATA.
+ * SATA ATA devices. Consider it only for PATA and SATAPI.
*/
if ((verdict & ATA_EH_SPDN_FALLBACK_TO_PIO) && (dev->spdn_cnt >= 2) &&
- (dev->link->ap->cbl != ATA_CBL_SATA) &&
+ (link->ap->cbl != ATA_CBL_SATA || dev->class == ATA_DEV_ATAPI) &&
(dev->xfer_shift != ATA_SHIFT_PIO)) {
if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) {
dev->spdn_cnt = 0;
@@ -1633,7 +1727,8 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, int is_io,
return 0;
done:
/* device has been slowed down, blow error history */
- ata_ering_clear(&dev->ering);
+ if (!(verdict & ATA_EH_SPDN_KEEP_ERRORS))
+ ata_ering_clear(&dev->ering);
return action;
}
@@ -1653,8 +1748,8 @@ static void ata_eh_link_autopsy(struct ata_link *link)
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
struct ata_device *dev;
- unsigned int all_err_mask = 0;
- int tag, is_io = 0;
+ unsigned int all_err_mask = 0, eflags = 0;
+ int tag;
u32 serror;
int rc;
@@ -1713,15 +1808,15 @@ static void ata_eh_link_autopsy(struct ata_link *link)
ehc->i.dev = qc->dev;
all_err_mask |= qc->err_mask;
if (qc->flags & ATA_QCFLAG_IO)
- is_io = 1;
+ eflags |= ATA_EFLAG_IS_IO;
}
/* enforce default EH actions */
if (ap->pflags & ATA_PFLAG_FROZEN ||
all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT))
ehc->i.action |= ATA_EH_SOFTRESET;
- else if ((is_io && all_err_mask) ||
- (!is_io && (all_err_mask & ~AC_ERR_DEV)))
+ else if (((eflags & ATA_EFLAG_IS_IO) && all_err_mask) ||
+ (!(eflags & ATA_EFLAG_IS_IO) && (all_err_mask & ~AC_ERR_DEV)))
ehc->i.action |= ATA_EH_REVALIDATE;
/* If we have offending qcs and the associated failed device,
@@ -1743,8 +1838,11 @@ static void ata_eh_link_autopsy(struct ata_link *link)
ata_dev_enabled(link->device))))
dev = link->device;
- if (dev)
- ehc->i.action |= ata_eh_speed_down(dev, is_io, all_err_mask);
+ if (dev) {
+ if (dev->flags & ATA_DFLAG_DUBIOUS_XFER)
+ eflags |= ATA_EFLAG_DUBIOUS_XFER;
+ ehc->i.action |= ata_eh_speed_down(dev, eflags, all_err_mask);
+ }
DPRINTK("EXIT\n");
}
@@ -1880,8 +1978,8 @@ static void ata_eh_link_report(struct ata_link *link)
[ATA_PROT_PIO] = "pio",
[ATA_PROT_DMA] = "dma",
[ATA_PROT_NCQ] = "ncq",
- [ATA_PROT_ATAPI] = "pio",
- [ATA_PROT_ATAPI_DMA] = "dma",
+ [ATAPI_PROT_PIO] = "pio",
+ [ATAPI_PROT_DMA] = "dma",
};
snprintf(data_buf, sizeof(data_buf), " %s %u %s",
@@ -1889,7 +1987,7 @@ static void ata_eh_link_report(struct ata_link *link)
dma_str[qc->dma_dir]);
}
- if (is_atapi_taskfile(&qc->tf))
+ if (ata_is_atapi(qc->tf.protocol))
snprintf(cdb_buf, sizeof(cdb_buf),
"cdb %02x %02x %02x %02x %02x %02x %02x %02x "
"%02x %02x %02x %02x %02x %02x %02x %02x\n ",
@@ -2329,6 +2427,58 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
return rc;
}
+/**
+ * ata_set_mode - Program timings and issue SET FEATURES - XFER
+ * @link: link on which timings will be programmed
+ * @r_failed_dev: out paramter for failed device
+ *
+ * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If
+ * ata_set_mode() fails, pointer to the failing device is
+ * returned in @r_failed_dev.
+ *
+ * LOCKING:
+ * PCI/etc. bus probe sem.
+ *
+ * RETURNS:
+ * 0 on success, negative errno otherwise
+ */
+int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
+{
+ struct ata_port *ap = link->ap;
+ struct ata_device *dev;
+ int rc;
+
+ /* if data transfer is verified, clear DUBIOUS_XFER on ering top */
+ ata_link_for_each_dev(dev, link) {
+ if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) {
+ struct ata_ering_entry *ent;
+
+ ent = ata_ering_top(&dev->ering);
+ if (ent)
+ ent->eflags &= ~ATA_EFLAG_DUBIOUS_XFER;
+ }
+ }
+
+ /* has private set_mode? */
+ if (ap->ops->set_mode)
+ rc = ap->ops->set_mode(link, r_failed_dev);
+ else
+ rc = ata_do_set_mode(link, r_failed_dev);
+
+ /* if transfer mode has changed, set DUBIOUS_XFER on device */
+ ata_link_for_each_dev(dev, link) {
+ struct ata_eh_context *ehc = &link->eh_context;
+ u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno];
+ u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno));
+
+ if (dev->xfer_mode != saved_xfer_mode ||
+ ata_ncq_enabled(dev) != saved_ncq)
+ dev->flags |= ATA_DFLAG_DUBIOUS_XFER;
+ }
+
+ return rc;
+}
+
static int ata_link_nr_enabled(struct ata_link *link)
{
struct ata_device *dev;
@@ -2375,6 +2525,24 @@ static int ata_eh_skip_recovery(struct ata_link *link)
return 1;
}
+static int ata_eh_schedule_probe(struct ata_device *dev)
+{
+ struct ata_eh_context *ehc = &dev->link->eh_context;
+
+ if (!(ehc->i.probe_mask & (1 << dev->devno)) ||
+ (ehc->did_probe_mask & (1 << dev->devno)))
+ return 0;
+
+ ata_eh_detach_dev(dev);
+ ata_dev_init(dev);
+ ehc->did_probe_mask |= (1 << dev->devno);
+ ehc->i.action |= ATA_EH_SOFTRESET;
+ ehc->saved_xfer_mode[dev->devno] = 0;
+ ehc->saved_ncq_enabled &= ~(1 << dev->devno);
+
+ return 1;
+}
+
static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
{
struct ata_eh_context *ehc = &dev->link->eh_context;
@@ -2406,16 +2574,9 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
if (ata_link_offline(dev->link))
ata_eh_detach_dev(dev);
- /* probe if requested */
- if ((ehc->i.probe_mask & (1 << dev->devno)) &&
- !(ehc->did_probe_mask & (1 << dev->devno))) {
- ata_eh_detach_dev(dev);
- ata_dev_init(dev);
-
+ /* schedule probe if necessary */
+ if (ata_eh_schedule_probe(dev))
ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
- ehc->did_probe_mask |= (1 << dev->devno);
- ehc->i.action |= ATA_EH_SOFTRESET;
- }
return 1;
} else {
@@ -2492,14 +2653,9 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
if (dev->flags & ATA_DFLAG_DETACH)
ata_eh_detach_dev(dev);
- if (!ata_dev_enabled(dev) &&
- ((ehc->i.probe_mask & (1 << dev->devno)) &&
- !(ehc->did_probe_mask & (1 << dev->devno)))) {
- ata_eh_detach_dev(dev);
- ata_dev_init(dev);
- ehc->did_probe_mask |= (1 << dev->devno);
- ehc->i.action |= ATA_EH_SOFTRESET;
- }
+ /* schedule probe if necessary */
+ if (!ata_dev_enabled(dev))
+ ata_eh_schedule_probe(dev);
}
}
@@ -2747,6 +2903,7 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
if (ap->ops->port_suspend)
rc = ap->ops->port_suspend(ap, ap->pm_mesg);
+ ata_acpi_set_state(ap, PMSG_SUSPEND);
out:
/* report result */
spin_lock_irqsave(ap->lock, flags);
@@ -2792,6 +2949,8 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
+ ata_acpi_set_state(ap, PMSG_ON);
+
if (ap->ops->port_resume)
rc = ap->ops->port_resume(ap);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 14daf48..3fd0820 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -517,7 +517,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
qc->scsicmd = cmd;
qc->scsidone = done;
- qc->__sg = scsi_sglist(cmd);
+ qc->sg = scsi_sglist(cmd);
qc->n_elem = scsi_sg_count(cmd);
} else {
cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1);
@@ -2210,7 +2210,7 @@ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf,
/* sector size */
ATA_SCSI_RBUF_SET(6, ATA_SECT_SIZE >> 8);
- ATA_SCSI_RBUF_SET(7, ATA_SECT_SIZE);
+ ATA_SCSI_RBUF_SET(7, ATA_SECT_SIZE & 0xff);
} else {
/* sector count, 64-bit */
ATA_SCSI_RBUF_SET(0, last_lba >> (8 * 7));
@@ -2224,7 +2224,7 @@ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf,
/* sector size */
ATA_SCSI_RBUF_SET(10, ATA_SECT_SIZE >> 8);
- ATA_SCSI_RBUF_SET(11, ATA_SECT_SIZE);
+ ATA_SCSI_RBUF_SET(11, ATA_SECT_SIZE & 0xff);
}
return 0;
@@ -2331,7 +2331,7 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
DPRINTK("ATAPI request sense\n");
/* FIXME: is this needed? */
- memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
+ memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
ap->ops->tf_read(ap, &qc->tf);
@@ -2341,7 +2341,9 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
ata_qc_reinit(qc);
- ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
+ /* setup sg table and init transfer direction */
+ sg_init_one(&qc->sgent, cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
+ ata_sg_init(qc, &qc->sgent, 1);
qc->dma_dir = DMA_FROM_DEVICE;
memset(&qc->cdb, 0, qc->dev->cdb_len);
@@ -2352,10 +2354,10 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
qc->tf.command = ATA_CMD_PACKET;
if (ata_pio_use_silly(ap)) {
- qc->tf.protocol = ATA_PROT_ATAPI_DMA;
+ qc->tf.protocol = ATAPI_PROT_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
} else {
- qc->tf.protocol = ATA_PROT_ATAPI;
+ qc->tf.protocol = ATAPI_PROT_PIO;
qc->tf.lbam = SCSI_SENSE_BUFFERSIZE;
qc->tf.lbah = 0;
}
@@ -2526,12 +2528,12 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
if (using_pio || nodata) {
/* no data, or PIO data xfer */
if (nodata)
- qc->tf.protocol = ATA_PROT_ATAPI_NODATA;
+ qc->tf.protocol = ATAPI_PROT_NODATA;
else
- qc->tf.protocol = ATA_PROT_ATAPI;
+ qc->tf.protocol = ATAPI_PROT_PIO;
} else {
/* DMA data xfer */
- qc->tf.protocol = ATA_PROT_ATAPI_DMA;
+ qc->tf.protocol = ATAPI_PROT_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
if (atapi_dmadir && (scmd->sc_data_direction != DMA_TO_DEVICE))
@@ -2690,6 +2692,24 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN)
goto invalid_fld;
+ /*
+ * Filter TPM commands by default. These provide an
+ * essentially uncontrolled encrypted "back door" between
+ * applications and the disk. Set libata.allow_tpm=1 if you
+ * have a real reason for wanting to use them. This ensures
+ * that installed software cannot easily mess stuff up without
+ * user intent. DVR type users will probably ship with this enabled
+ * for movie content management.
+ *
+ * Note that for ATA8 we can issue a DCS change and DCS freeze lock
+ * for this and should do in future but that it is not sufficient as
+ * DCS is an optional feature set. Thus we also do the software filter
+ * so that we comply with the TC consortium stated goal that the user
+ * can turn off TC features of their system.
+ */
+ if (tf->command >= 0x5C && tf->command <= 0x5F && !libata_allow_tpm)
+ goto invalid_fld;
+
/* We may not issue DMA commands if no DMA mode is set */
if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0)
goto invalid_fld;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index b7ac80b..60cd4b1 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -147,7 +147,9 @@ void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
* @tf: ATA taskfile register set for storing input
*
* Reads ATA taskfile registers for currently-selected device
- * into @tf.
+ * into @tf. Assumes the device has a fully SFF compliant task file
+ * layout and behaviour. If you device does not (eg has a different
+ * status method) then you will need to provide a replacement tf_read
*
* LOCKING:
* Inherited from caller.
@@ -156,7 +158,7 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- tf->command = ata_chk_status(ap);
+ tf->command = ata_check_status(ap);
tf->feature = ioread8(ioaddr->error_addr);
tf->nsect = ioread8(ioaddr->nsect_addr);
tf->lbal = ioread8(ioaddr->lbal_addr);
@@ -415,7 +417,7 @@ void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
ap->hsm_task_state = HSM_ST_IDLE;
if (qc && (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATA_PROT_ATAPI_DMA)) {
+ qc->tf.protocol == ATAPI_PROT_DMA)) {
u8 host_stat;
host_stat = ap->ops->bmdma_status(ap);
@@ -549,7 +551,7 @@ int ata_pci_init_bmdma(struct ata_host *host)
return rc;
/* request and iomap DMA region */
- rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME);
+ rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev));
if (rc) {
dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n");
return -ENOMEM;
@@ -619,7 +621,8 @@ int ata_pci_init_sff_host(struct ata_host *host)
continue;
}
- rc = pcim_iomap_regions(pdev, 0x3 << base, DRV_NAME);
+ rc = pcim_iomap_regions(pdev, 0x3 << base,
+ dev_driver_string(gdev));
if (rc) {
dev_printk(KERN_WARNING, gdev,
"failed to request/iomap BARs for port %d "
@@ -711,6 +714,99 @@ int ata_pci_prepare_sff_host(struct pci_dev *pdev,
}
/**
+ * ata_pci_activate_sff_host - start SFF host, request IRQ and register it
+ * @host: target SFF ATA host
+ * @irq_handler: irq_handler used when requesting IRQ(s)
+ * @sht: scsi_host_template to use when registering the host
+ *
+ * This is the counterpart of ata_host_activate() for SFF ATA
+ * hosts. This separate helper is necessary because SFF hosts
+ * use two separate interrupts in legacy mode.
+ *
+ * LOCKING:
+ * Inherited from calling layer (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_pci_activate_sff_host(struct ata_host *host,
+ irq_handler_t irq_handler,
+ struct scsi_host_template *sht)
+{
+ struct device *dev = host->dev;
+ struct pci_dev *pdev = to_pci_dev(dev);
+ const char *drv_name = dev_driver_string(host->dev);
+ int legacy_mode = 0, rc;
+
+ rc = ata_host_start(host);
+ if (rc)
+ return rc;
+
+ if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
+ u8 tmp8, mask;
+
+ /* TODO: What if one channel is in native mode ... */
+ pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
+ mask = (1 << 2) | (1 << 0);
+ if ((tmp8 & mask) != mask)
+ legacy_mode = 1;
+#if defined(CONFIG_NO_ATA_LEGACY)
+ /* Some platforms with PCI limits cannot address compat
+ port space. In that case we punt if their firmware has
+ left a device in compatibility mode */
+ if (legacy_mode) {
+ printk(KERN_ERR "ata: Compatibility mode ATA is not supported on this platform, skipping.\n");
+ return -EOPNOTSUPP;
+ }
+#endif
+ }
+
+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
+ return -ENOMEM;
+
+ if (!legacy_mode && pdev->irq) {
+ rc = devm_request_irq(dev, pdev->irq, irq_handler,
+ IRQF_SHARED, drv_name, host);
+ if (rc)
+ goto out;
+
+ ata_port_desc(host->ports[0], "irq %d", pdev->irq);
+ ata_port_desc(host->ports[1], "irq %d", pdev->irq);
+ } else if (legacy_mode) {
+ if (!ata_port_is_dummy(host->ports[0])) {
+ rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev),
+ irq_handler, IRQF_SHARED,
+ drv_name, host);
+ if (rc)
+ goto out;
+
+ ata_port_desc(host->ports[0], "irq %d",
+ ATA_PRIMARY_IRQ(pdev));
+ }
+
+ if (!ata_port_is_dummy(host->ports[1])) {
+ rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev),
+ irq_handler, IRQF_SHARED,
+ drv_name, host);
+ if (rc)
+ goto out;
+
+ ata_port_desc(host->ports[1], "irq %d",
+ ATA_SECONDARY_IRQ(pdev));
+ }
+ }
+
+ rc = ata_host_register(host, sht);
+ out:
+ if (rc == 0)
+ devres_remove_group(dev, NULL);
+ else
+ devres_release_group(dev, NULL);
+
+ return rc;
+}
+
+/**
* ata_pci_init_one - Initialize/register PCI IDE host controller
* @pdev: Controller to be initialized
* @ppi: array of port_info, must be enough for two ports
@@ -739,8 +835,6 @@ int ata_pci_init_one(struct pci_dev *pdev,
struct device *dev = &pdev->dev;
const struct ata_port_info *pi = NULL;
struct ata_host *host = NULL;
- u8 mask;
- int legacy_mode = 0;
int i, rc;
DPRINTK("ENTER\n");
@@ -762,95 +856,24 @@ int ata_pci_init_one(struct pci_dev *pdev,
if (!devres_open_group(dev, NULL, GFP_KERNEL))
return -ENOMEM;
- /* FIXME: Really for ATA it isn't safe because the device may be
- multi-purpose and we want to leave it alone if it was already
- enabled. Secondly for shared use as Arjan says we want refcounting
-
- Checking dev->is_enabled is insufficient as this is not set at
- boot for the primary video which is BIOS enabled
- */
-
rc = pcim_enable_device(pdev);
if (rc)
- goto err_out;
+ goto out;
- if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
- u8 tmp8;
-
- /* TODO: What if one channel is in native mode ... */
- pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
- mask = (1 << 2) | (1 << 0);
- if ((tmp8 & mask) != mask)
- legacy_mode = 1;
-#if defined(CONFIG_NO_ATA_LEGACY)
- /* Some platforms with PCI limits cannot address compat
- port space. In that case we punt if their firmware has
- left a device in compatibility mode */
- if (legacy_mode) {
- printk(KERN_ERR "ata: Compatibility mode ATA is not supported on this platform, skipping.\n");
- rc = -EOPNOTSUPP;
- goto err_out;
- }
-#endif
- }
-
- /* prepare host */
+ /* prepare and activate SFF host */
rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
if (rc)
- goto err_out;
+ goto out;
pci_set_master(pdev);
+ rc = ata_pci_activate_sff_host(host, pi->port_ops->irq_handler,
+ pi->sht);
+ out:
+ if (rc == 0)
+ devres_remove_group(&pdev->dev, NULL);
+ else
+ devres_release_group(&pdev->dev, NULL);
- /* start host and request IRQ */
- rc = ata_host_start(host);
- if (rc)
- goto err_out;
-
- if (!legacy_mode && pdev->irq) {
- /* We may have no IRQ assigned in which case we can poll. This
- shouldn't happen on a sane system but robustness is cheap
- in this case */
- rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler,
- IRQF_SHARED, DRV_NAME, host);
- if (rc)
- goto err_out;
-
- ata_port_desc(host->ports[0], "irq %d", pdev->irq);
- ata_port_desc(host->ports[1], "irq %d", pdev->irq);
- } else if (legacy_mode) {
- if (!ata_port_is_dummy(host->ports[0])) {
- rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev),
- pi->port_ops->irq_handler,
- IRQF_SHARED, DRV_NAME, host);
- if (rc)
- goto err_out;
-
- ata_port_desc(host->ports[0], "irq %d",
- ATA_PRIMARY_IRQ(pdev));
- }
-
- if (!ata_port_is_dummy(host->ports[1])) {
- rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev),
- pi->port_ops->irq_handler,
- IRQF_SHARED, DRV_NAME, host);
- if (rc)
- goto err_out;
-
- ata_port_desc(host->ports[1], "irq %d",
- ATA_SECONDARY_IRQ(pdev));
- }
- }
-
- /* register */
- rc = ata_host_register(host, pi->sht);
- if (rc)
- goto err_out;
-
- devres_remove_group(dev, NULL);
- return 0;
-
-err_out:
- devres_release_group(dev, NULL);
return rc;
}
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index bbe59c2..409ffb9 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -60,6 +60,7 @@ extern int atapi_dmadir;
extern int atapi_passthru16;
extern int libata_fua;
extern int libata_noacpi;
+extern int libata_allow_tpm;
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
@@ -85,7 +86,6 @@ extern int ata_dev_configure(struct ata_device *dev);
extern int sata_down_spd_limit(struct ata_link *link);
extern int sata_set_spd_needed(struct ata_link *link);
extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
-extern int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
extern void ata_sg_clean(struct ata_queued_cmd *qc);
extern void ata_qc_free(struct ata_queued_cmd *qc);
extern void ata_qc_issue(struct ata_queued_cmd *qc);
@@ -113,6 +113,7 @@ extern int ata_acpi_on_suspend(struct ata_port *ap);
extern void ata_acpi_on_resume(struct ata_port *ap);
extern int ata_acpi_on_devcfg(struct ata_device *dev);
extern void ata_acpi_on_disable(struct ata_device *dev);
+extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state);
#else
static inline void ata_acpi_associate_sata_port(struct ata_port *ap) { }
static inline void ata_acpi_associate(struct ata_host *host) { }
@@ -121,6 +122,8 @@ static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
static inline void ata_acpi_on_resume(struct ata_port *ap) { }
static inline int ata_acpi_on_devcfg(struct ata_device *dev) { return 0; }
static inline void ata_acpi_on_disable(struct ata_device *dev) { }
+static inline void ata_acpi_set_state(struct ata_port *ap,
+ pm_message_t state) { }
#endif
/* libata-scsi.c */
@@ -183,6 +186,7 @@ extern void ata_eh_report(struct ata_port *ap);
extern int ata_eh_reset(struct ata_link *link, int classify,
ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
ata_reset_fn_t hardreset, ata_postreset_fn_t postreset);
+extern int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
extern int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset,
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index e4542ab..244098a 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -81,17 +81,6 @@ static void pacpi_error_handler(struct ata_port *ap)
NULL, ata_std_postreset);
}
-/* Welcome to ACPI, bring a bucket */
-static const unsigned int pio_cycle[7] = {
- 600, 383, 240, 180, 120, 100, 80
-};
-static const unsigned int mwdma_cycle[5] = {
- 480, 150, 120, 100, 80
-};
-static const unsigned int udma_cycle[7] = {
- 120, 80, 60, 45, 30, 20, 15
-};
-
/**
* pacpi_discover_modes - filter non ACPI modes
* @adev: ATA device
@@ -103,56 +92,20 @@ static const unsigned int udma_cycle[7] = {
static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device *adev)
{
- int unit = adev->devno;
struct pata_acpi *acpi = ap->private_data;
- int i;
- u32 t;
- unsigned long mask = (0x7f << ATA_SHIFT_UDMA) | (0x7 << ATA_SHIFT_MWDMA) | (0x1F << ATA_SHIFT_PIO);
-
struct ata_acpi_gtm probe;
+ unsigned int xfer_mask;
probe = acpi->gtm;
- /* We always use the 0 slot for crap hardware */
- if (!(probe.flags & 0x10))
- unit = 0;
-
ata_acpi_gtm(ap, &probe);
- /* Start by scanning for PIO modes */
- for (i = 0; i < 7; i++) {
- t = probe.drive[unit].pio;
- if (t <= pio_cycle[i]) {
- mask |= (2 << (ATA_SHIFT_PIO + i)) - 1;
- break;
- }
- }
+ xfer_mask = ata_acpi_gtm_xfermask(adev, &probe);
- /* See if we have MWDMA or UDMA data. We don't bother with MWDMA
- if UDMA is availabe as this means the BIOS set UDMA and our
- error changedown if it works is UDMA to PIO anyway */
- if (probe.flags & (1 << (2 * unit))) {
- /* MWDMA */
- for (i = 0; i < 5; i++) {
- t = probe.drive[unit].dma;
- if (t <= mwdma_cycle[i]) {
- mask |= (2 << (ATA_SHIFT_MWDMA + i)) - 1;
- break;
- }
- }
- } else {
- /* UDMA */
- for (i = 0; i < 7; i++) {
- t = probe.drive[unit].dma;
- if (t <= udma_cycle[i]) {
- mask |= (2 << (ATA_SHIFT_UDMA + i)) - 1;
- break;
- }
- }
- }
- if (mask & (0xF8 << ATA_SHIFT_UDMA))
+ if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
ap->cbl = ATA_CBL_PATA80;
- return mask;
+
+ return xfer_mask;
}
/**
@@ -180,12 +133,14 @@ static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
int unit = adev->devno;
struct pata_acpi *acpi = ap->private_data;
+ const struct ata_timing *t;
if (!(acpi->gtm.flags & 0x10))
unit = 0;
/* Now stuff the nS values into the structure */
- acpi->gtm.drive[unit].pio = pio_cycle[adev->pio_mode - XFER_PIO_0];
+ t = ata_timing_find_mode(adev->pio_mode);
+ acpi->gtm.drive[unit].pio = t->cycle;
ata_acpi_stm(ap, &acpi->gtm);
/* See what mode we actually got */
ata_acpi_gtm(ap, &acpi->gtm);
@@ -201,16 +156,18 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
int unit = adev->devno;
struct pata_acpi *acpi = ap->private_data;
+ const struct ata_timing *t;
if (!(acpi->gtm.flags & 0x10))
unit = 0;
/* Now stuff the nS values into the structure */
+ t = ata_timing_find_mode(adev->dma_mode);
if (adev->dma_mode >= XFER_UDMA_0) {
- acpi->gtm.drive[unit].dma = udma_cycle[adev->dma_mode - XFER_UDMA_0];
+ acpi->gtm.drive[unit].dma = t->udma;
acpi->gtm.flags |= (1 << (2 * unit));
} else {
- acpi->gtm.drive[unit].dma = mwdma_cycle[adev->dma_mode - XFER_MW_DMA_0];
+ acpi->gtm.drive[unit].dma = t->cycle;
acpi->gtm.flags &= ~(1 << (2 * unit));
}
ata_acpi_stm(ap, &acpi->gtm);
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 8caf9af..7e68edf 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -64,7 +64,7 @@ static int ali_cable_override(struct pci_dev *pdev)
if (pdev->subsystem_vendor == 0x10CF && pdev->subsystem_device == 0x10AF)
return 1;
/* Mitac 8317 (Winbook-A) and relatives */
- if (pdev->subsystem_vendor == 0x1071 && pdev->subsystem_device == 0x8317)
+ if (pdev->subsystem_vendor == 0x1071 && pdev->subsystem_device == 0x8317)
return 1;
/* Systems by DMI */
if (dmi_check_system(cable_dmi_table))
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 3cc27b5..761a666 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -220,6 +220,62 @@ static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev)
timing_setup(ap, adev, 0x40, adev->dma_mode, 4);
}
+/* Both host-side and drive-side detection results are worthless on NV
+ * PATAs. Ignore them and just follow what BIOS configured. Both the
+ * current configuration in PCI config reg and ACPI GTM result are
+ * cached during driver attach and are consulted to select transfer
+ * mode.
+ */
+static unsigned long nv_mode_filter(struct ata_device *dev,
+ unsigned long xfer_mask)
+{
+ static const unsigned int udma_mask_map[] =
+ { ATA_UDMA2, ATA_UDMA1, ATA_UDMA0, 0,
+ ATA_UDMA3, ATA_UDMA4, ATA_UDMA5, ATA_UDMA6 };
+ struct ata_port *ap = dev->link->ap;
+ char acpi_str[32] = "";
+ u32 saved_udma, udma;
+ const struct ata_acpi_gtm *gtm;
+ unsigned long bios_limit = 0, acpi_limit = 0, limit;
+
+ /* find out what BIOS configured */
+ udma = saved_udma = (unsigned long)ap->host->private_data;
+
+ if (ap->port_no == 0)
+ udma >>= 16;
+ if (dev->devno == 0)
+ udma >>= 8;
+
+ if ((udma & 0xc0) == 0xc0)
+ bios_limit = ata_pack_xfermask(0, 0, udma_mask_map[udma & 0x7]);
+
+ /* consult ACPI GTM too */
+ gtm = ata_acpi_init_gtm(ap);
+ if (gtm) {
+ acpi_limit = ata_acpi_gtm_xfermask(dev, gtm);
+
+ snprintf(acpi_str, sizeof(acpi_str), " (%u:%u:0x%x)",
+ gtm->drive[0].dma, gtm->drive[1].dma, gtm->flags);
+ }
+
+ /* be optimistic, EH can take care of things if something goes wrong */
+ limit = bios_limit | acpi_limit;
+
+ /* If PIO or DMA isn't configured at all, don't limit. Let EH
+ * handle it.
+ */
+ if (!(limit & ATA_MASK_PIO))
+ limit |= ATA_MASK_PIO;
+ if (!(limit & (ATA_MASK_MWDMA | ATA_MASK_UDMA)))
+ limit |= ATA_MASK_MWDMA | ATA_MASK_UDMA;
+
+ ata_port_printk(ap, KERN_DEBUG, "nv_mode_filter: 0x%lx&0x%lx->0x%lx, "
+ "BIOS=0x%lx (0x%x) ACPI=0x%lx%s\n",
+ xfer_mask, limit, xfer_mask & limit, bios_limit,
+ saved_udma, acpi_limit, acpi_str);
+
+ return xfer_mask & limit;
+}
/**
* nv_probe_init - cable detection
@@ -252,31 +308,6 @@ static void nv_error_handler(struct ata_port *ap)
ata_std_postreset);
}
-static int nv_cable_detect(struct ata_port *ap)
-{
- static const u8 bitmask[2] = {0x03, 0x0C};
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- u8 ata66;
- u16 udma;
- int cbl;
-
- pci_read_config_byte(pdev, 0x52, &ata66);
- if (ata66 & bitmask[ap->port_no])
- cbl = ATA_CBL_PATA80;
- else
- cbl = ATA_CBL_PATA40;
-
- /* We now have to double check because the Nvidia boxes BIOS
- doesn't always set the cable bits but does set mode bits */
- pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma);
- if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
- cbl = ATA_CBL_PATA80;
- /* And a triple check across suspend/resume with ACPI around */
- if (ata_acpi_cbl_80wire(ap))
- cbl = ATA_CBL_PATA80;
- return cbl;
-}
-
/**
* nv100_set_piomode - set initial PIO mode data
* @ap: ATA interface
@@ -314,6 +345,14 @@ static void nv133_set_dmamode(struct ata_port *ap, struct ata_device *adev)
timing_setup(ap, adev, 0x50, adev->dma_mode, 4);
}
+static void nv_host_stop(struct ata_host *host)
+{
+ u32 udma = (unsigned long)host->private_data;
+
+ /* restore PCI config register 0x60 */
+ pci_write_config_dword(to_pci_dev(host->dev), 0x60, udma);
+}
+
static struct scsi_host_template amd_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
@@ -478,7 +517,8 @@ static struct ata_port_operations nv100_port_ops = {
.thaw = ata_bmdma_thaw,
.error_handler = nv_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = nv_cable_detect,
+ .cable_detect = ata_cable_ignore,
+ .mode_filter = nv_mode_filter,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -495,6 +535,7 @@ static struct ata_port_operations nv100_port_ops = {
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
+ .host_stop = nv_host_stop,
};
static struct ata_port_operations nv133_port_ops = {
@@ -511,7 +552,8 @@ static struct ata_port_operations nv133_port_ops = {
.thaw = ata_bmdma_thaw,
.error_handler = nv_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = nv_cable_detect,
+ .cable_detect = ata_cable_ignore,
+ .mode_filter = nv_mode_filter,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -528,6 +570,7 @@ static struct ata_port_operations nv133_port_ops = {
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
+ .host_stop = nv_host_stop,
};
static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -614,7 +657,8 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &amd100_port_ops
}
};
- const struct ata_port_info *ppi[] = { NULL, NULL };
+ struct ata_port_info pi;
+ const struct ata_port_info *ppi[] = { &pi, NULL };
static int printed_version;
int type = id->driver_data;
u8 fifo;
@@ -628,6 +672,19 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
if (type == 1 && pdev->revision > 0x7)
type = 2;
+ /* Serenade ? */
+ if (type == 5 && pdev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
+ pdev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
+ type = 6; /* UDMA 100 only */
+
+ /*
+ * Okay, type is determined now. Apply type-specific workarounds.
+ */
+ pi = info[type];
+
+ if (type < 3)
+ ata_pci_clear_simplex(pdev);
+
/* Check for AMD7411 */
if (type == 3)
/* FIFO is broken */
@@ -635,16 +692,17 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
else
pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
- /* Serenade ? */
- if (type == 5 && pdev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
- pdev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
- type = 6; /* UDMA 100 only */
+ /* Cable detection on Nvidia chips doesn't work too well,
+ * cache BIOS programmed UDMA mode.
+ */
+ if (type == 7 || type == 8) {
+ u32 udma;
- if (type < 3)
- ata_pci_clear_simplex(pdev);
+ pci_read_config_dword(pdev, 0x60, &udma);
+ pi.private_data = (void *)(unsigned long)udma;
+ }
/* And fire it up */
- ppi[0] = &info[type];
return ata_pci_init_one(pdev, ppi);
}
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 7842cc4..a32e3c4 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -832,6 +832,7 @@ static void bfin_bmdma_setup(struct ata_queued_cmd *qc)
{
unsigned short config = WDSIZE_16;
struct scatterlist *sg;
+ unsigned int si;
pr_debug("in atapi dma setup\n");
/* Program the ATA_CTRL register with dir */
@@ -839,7 +840,7 @@ static void bfin_bmdma_setup(struct ata_queued_cmd *qc)
/* fill the ATAPI DMA controller */
set_dma_config(CH_ATAPI_TX, config);
set_dma_x_modify(CH_ATAPI_TX, 2);
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
set_dma_start_addr(CH_ATAPI_TX, sg_dma_address(sg));
set_dma_x_count(CH_ATAPI_TX, sg_dma_len(sg) >> 1);
}
@@ -848,7 +849,7 @@ static void bfin_bmdma_setup(struct ata_queued_cmd *qc)
/* fill the ATAPI DMA controller */
set_dma_config(CH_ATAPI_RX, config);
set_dma_x_modify(CH_ATAPI_RX, 2);
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
set_dma_start_addr(CH_ATAPI_RX, sg_dma_address(sg));
set_dma_x_count(CH_ATAPI_RX, sg_dma_len(sg) >> 1);
}
@@ -867,6 +868,7 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc)
struct ata_port *ap = qc->ap;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
struct scatterlist *sg;
+ unsigned int si;
pr_debug("in atapi dma start\n");
if (!(ap->udma_mask || ap->mwdma_mask))
@@ -881,7 +883,7 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc)
* data cache is enabled. Otherwise, this loop
* is an empty loop and optimized out.
*/
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
flush_dcache_range(sg_dma_address(sg),
sg_dma_address(sg) + sg_dma_len(sg));
}
@@ -910,7 +912,7 @@ static void bfin_bmdma_start(struct ata_queued_cmd *qc)
ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | TFRCNT_RST);
/* Set transfer length to buffer len */
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
ATAPI_SET_XFER_LEN(base, (sg_dma_len(sg) >> 1));
}
@@ -932,6 +934,7 @@ static void bfin_bmdma_stop(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct scatterlist *sg;
+ unsigned int si;
pr_debug("in atapi dma stop\n");
if (!(ap->udma_mask || ap->mwdma_mask))
@@ -950,7 +953,7 @@ static void bfin_bmdma_stop(struct ata_queued_cmd *qc)
* data cache is enabled. Otherwise, this loop
* is an empty loop and optimized out.
*/
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
invalidate_dcache_range(
sg_dma_address(sg),
sg_dma_address(sg)
@@ -1167,34 +1170,36 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap)
* Note: Original code is ata_data_xfer().
*/
-static void bfin_data_xfer(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
+static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf,
+ unsigned int buflen, int rw)
{
- struct ata_port *ap = adev->link->ap;
- unsigned int words = buflen >> 1;
- unsigned short *buf16 = (u16 *) buf;
+ struct ata_port *ap = dev->link->ap;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
+ unsigned int words = buflen >> 1;
+ unsigned short *buf16 = (u16 *)buf;
/* Transfer multiple of 2 bytes */
- if (write_data) {
- write_atapi_data(base, words, buf16);
- } else {
+ if (rw == READ)
read_atapi_data(base, words, buf16);
- }
+ else
+ write_atapi_data(base, words, buf16);
/* Transfer trailing 1 byte, if any. */
if (unlikely(buflen & 0x01)) {
unsigned short align_buf[1] = { 0 };
unsigned char *trailing_buf = buf + buflen - 1;
- if (write_data) {
- memcpy(align_buf, trailing_buf, 1);
- write_atapi_data(base, 1, align_buf);
- } else {
+ if (rw == READ) {
read_atapi_data(base, 1, align_buf);
memcpy(trailing_buf, align_buf, 1);
+ } else {
+ memcpy(align_buf, trailing_buf, 1);
+ write_atapi_data(base, 1, align_buf);
}
+ words++;
}
+
+ return words << 1;
}
/**
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 33f7f08..d4590f5 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -198,7 +198,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
};
const struct ata_port_info *ppi[2];
u8 pcicfg;
- void *iomap[5];
+ void __iomem *iomap[5];
struct ata_host *host;
struct ata_ioports *ioaddr;
int i, rc;
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index c79f066..68eb349 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -847,15 +847,16 @@ static u32 hpt374_read_freq(struct pci_dev *pdev)
u32 freq;
unsigned long io_base = pci_resource_start(pdev, 4);
if (PCI_FUNC(pdev->devfn) & 1) {
- struct pci_dev *pdev_0 = pci_get_slot(pdev->bus, pdev->devfn - 1);
+ struct pci_dev *pdev_0;
+
+ pdev_0 = pci_get_slot(pdev->bus, pdev->devfn - 1);
/* Someone hot plugged the controller on us ? */
if (pdev_0 == NULL)
return 0;
io_base = pci_resource_start(pdev_0, 4);
freq = inl(io_base + 0x90);
pci_dev_put(pdev_0);
- }
- else
+ } else
freq = inl(io_base + 0x90);
return freq;
}
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index 842fe08..5b8586d 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -224,6 +224,7 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc)
struct pata_icside_state *state = ap->host->private_data;
struct scatterlist *sg, *rsg = state->sg;
unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE;
+ unsigned int si;
/*
* We are simplex; BUG if we try to fiddle with DMA
@@ -234,7 +235,7 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc)
/*
* Copy ATAs scattered sg list into a contiguous array of sg
*/
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
memcpy(rsg, sg, sizeof(*sg));
rsg++;
}
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index ca9aae0..109ddd4 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -430,7 +430,7 @@ static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc)
return ata_qc_issue_prot(qc);
}
printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command);
- return AC_ERR_INVALID;
+ return AC_ERR_DEV;
}
/**
@@ -516,6 +516,37 @@ static void it821x_dev_config(struct ata_device *adev)
printk("(%dK stripe)", adev->id[146]);
printk(".\n");
}
+ /* This is a controller firmware triggered funny, don't
+ report the drive faulty! */
+ adev->horkage &= ~ATA_HORKAGE_DIAGNOSTIC;
+}
+
+/**
+ * it821x_ident_hack - Hack identify data up
+ * @ap: Port
+ *
+ * Walk the devices on this firmware driven port and slightly
+ * mash the identify data to stop us and common tools trying to
+ * use features not firmware supported. The firmware itself does
+ * some masking (eg SMART) but not enough.
+ *
+ * This is a bit of an abuse of the cable method, but it is the
+ * only method called at the right time. We could modify the libata
+ * core specifically for ident hacking but while we have one offender
+ * it seems better to keep the fallout localised.
+ */
+
+static int it821x_ident_hack(struct ata_port *ap)
+{
+ struct ata_device *adev;
+ ata_link_for_each_dev(adev, &ap->link) {
+ if (ata_dev_enabled(adev)) {
+ adev->id[84] &= ~(1 << 6); /* No FUA */
+ adev->id[85] &= ~(1 << 10); /* No HPA */
+ adev->id[76] = 0; /* No NCQ/AN etc */
+ }
+ }
+ return ata_cable_unknown(ap);
}
@@ -634,7 +665,7 @@ static struct ata_port_operations it821x_smart_port_ops = {
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_unknown,
+ .cable_detect = it821x_ident_hack,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 120b5bf..030878f 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -42,13 +42,13 @@ static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
return 0;
}
-static void ixp4xx_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
+static unsigned int ixp4xx_mmio_data_xfer(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw)
{
unsigned int i;
unsigned int words = buflen >> 1;
u16 *buf16 = (u16 *) buf;
- struct ata_port *ap = adev->link->ap;
+ struct ata_port *ap = dev->link->ap;
void __iomem *mmio = ap->ioaddr.data_addr;
struct ixp4xx_pata_data *data = ap->host->dev->platform_data;
@@ -59,30 +59,32 @@ static void ixp4xx_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
udelay(100);
/* Transfer multiple of 2 bytes */
- if (write_data) {
- for (i = 0; i < words; i++)
- writew(buf16[i], mmio);
- } else {
+ if (rw == READ)
for (i = 0; i < words; i++)
buf16[i] = readw(mmio);
- }
+ else
+ for (i = 0; i < words; i++)
+ writew(buf16[i], mmio);
/* Transfer trailing 1 byte, if any. */
if (unlikely(buflen & 0x01)) {
u16 align_buf[1] = { 0 };
unsigned char *trailing_buf = buf + buflen - 1;
- if (write_data) {
- memcpy(align_buf, trailing_buf, 1);
- writew(align_buf[0], mmio);
- } else {
+ if (rw == READ) {
align_buf[0] = readw(mmio);
memcpy(trailing_buf, align_buf, 1);
+ } else {
+ memcpy(align_buf, trailing_buf, 1);
+ writew(align_buf[0], mmio);
}
+ words++;
}
udelay(100);
*data->cs0_cfg |= 0x01;
+
+ return words << 1;
}
static struct scsi_host_template ixp4xx_sht = {
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 17159b5..333dc15 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -28,7 +28,6 @@
*
* Unsupported but docs exist:
* Appian/Adaptec AIC25VL01/Cirrus Logic PD7220
- * Winbond W83759A
*
* This driver handles legacy (that is "ISA/VLB side") IDE ports found
* on PC class systems. There are three hybrid devices that are exceptions
@@ -36,7 +35,7 @@
* the MPIIX where the tuning is PCI side but the IDE is "ISA side".
*
* Specific support is included for the ht6560a/ht6560b/opti82c611a/
- * opti82c465mv/promise 20230c/20630
+ * opti82c465mv/promise 20230c/20630/winbond83759A
*
* Use the autospeed and pio_mask options with:
* Appian ADI/2 aka CLPD7220 or AIC25VL01.
@@ -47,9 +46,6 @@
* For now use autospeed and pio_mask as above with the W83759A. This may
* change.
*
- * TODO
- * Merge existing pata_qdi driver
- *
*/
#include <linux/kernel.h>
@@ -64,12 +60,13 @@
#include <linux/platform_device.h>
#define DRV_NAME "pata_legacy"
-#define DRV_VERSION "0.5.5"
+#define DRV_VERSION "0.6.5"
#define NR_HOST 6
-static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
-static int legacy_irq[NR_HOST] = { 14, 15, 11, 10, 8, 12 };
+static int all;
+module_param(all, int, 0444);
+MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)");
struct legacy_data {
unsigned long timing;
@@ -80,21 +77,107 @@ struct legacy_data {
};
+enum controller {
+ BIOS = 0,
+ SNOOP = 1,
+ PDC20230 = 2,
+ HT6560A = 3,
+ HT6560B = 4,
+ OPTI611A = 5,
+ OPTI46X = 6,
+ QDI6500 = 7,
+ QDI6580 = 8,
+ QDI6580DP = 9, /* Dual channel mode is different */
+ W83759A = 10,
+
+ UNKNOWN = -1
+};
+
+
+struct legacy_probe {
+ unsigned char *name;
+ unsigned long port;
+ unsigned int irq;
+ unsigned int slot;
+ enum controller type;
+ unsigned long private;
+};
+
+struct legacy_controller {
+ const char *name;
+ struct ata_port_operations *ops;
+ unsigned int pio_mask;
+ unsigned int flags;
+ int (*setup)(struct platform_device *, struct legacy_probe *probe,
+ struct legacy_data *data);
+};
+
+static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
+
+static struct legacy_probe probe_list[NR_HOST];
static struct legacy_data legacy_data[NR_HOST];
static struct ata_host *legacy_host[NR_HOST];
static int nr_legacy_host;
-static int probe_all; /* Set to check all ISA port ranges */
-static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */
-static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */
-static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */
-static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */
-static int autospeed; /* Chip present which snoops speed changes */
-static int pio_mask = 0x1F; /* PIO range for autospeed devices */
+static int probe_all; /* Set to check all ISA port ranges */
+static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */
+static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */
+static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */
+static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */
+static int qdi; /* Set to probe QDI controllers */
+static int winbond; /* Set to probe Winbond controllers,
+ give I/O port if non stdanard */
+static int autospeed; /* Chip present which snoops speed changes */
+static int pio_mask = 0x1F; /* PIO range for autospeed devices */
static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
/**
+ * legacy_probe_add - Add interface to probe list
+ * @port: Controller port
+ * @irq: IRQ number
+ * @type: Controller type
+ * @private: Controller specific info
+ *
+ * Add an entry into the probe list for ATA controllers. This is used
+ * to add the default ISA slots and then to build up the table
+ * further according to other ISA/VLB/Weird device scans
+ *
+ * An I/O port list is used to keep ordering stable and sane, as we
+ * don't have any good way to talk about ordering otherwise
+ */
+
+static int legacy_probe_add(unsigned long port, unsigned int irq,
+ enum controller type, unsigned long private)
+{
+ struct legacy_probe *lp = &probe_list[0];
+ int i;
+ struct legacy_probe *free = NULL;
+
+ for (i = 0; i < NR_HOST; i++) {
+ if (lp->port == 0 && free == NULL)
+ free = lp;
+ /* Matching port, or the correct slot for ordering */
+ if (lp->port == port || legacy_port[i] == port) {
+ free = lp;
+ break;
+ }
+ lp++;
+ }
+ if (free == NULL) {
+ printk(KERN_ERR "pata_legacy: Too many interfaces.\n");
+ return -1;
+ }
+ /* Fill in the entry for later probing */
+ free->port = port;
+ free->irq = irq;
+ free->type = type;
+ free->private = private;
+ return 0;
+}
+
+
+/**
* legacy_set_mode - mode setting
* @link: IDE link
* @unused: Device that failed when error is returned
@@ -113,7 +196,8 @@ static int legacy_set_mode(struct ata_link *link, struct ata_device **unused)
ata_link_for_each_dev(dev, link) {
if (ata_dev_enabled(dev)) {
- ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
+ ata_dev_printk(dev, KERN_INFO,
+ "configured for PIO\n");
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
@@ -171,7 +255,7 @@ static struct ata_port_operations simple_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
static struct ata_port_operations legacy_port_ops = {
@@ -198,15 +282,16 @@ static struct ata_port_operations legacy_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
/*
* Promise 20230C and 20620 support
*
- * This controller supports PIO0 to PIO2. We set PIO timings conservatively to
- * allow for 50MHz Vesa Local Bus. The 20620 DMA support is weird being DMA to
- * controller and PIO'd to the host and not supported.
+ * This controller supports PIO0 to PIO2. We set PIO timings
+ * conservatively to allow for 50MHz Vesa Local Bus. The 20620 DMA
+ * support is weird being DMA to controller and PIO'd to the host
+ * and not supported.
*/
static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -221,8 +306,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
local_irq_save(flags);
/* Unlock the control interface */
- do
- {
+ do {
inb(0x1F5);
outb(inb(0x1F2) | 0x80, 0x1F2);
inb(0x1F2);
@@ -231,7 +315,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
inb(0x1F2);
inb(0x1F2);
}
- while((inb(0x1F2) & 0x80) && --tries);
+ while ((inb(0x1F2) & 0x80) && --tries);
local_irq_restore(flags);
@@ -249,13 +333,14 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
-static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data)
+static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw)
{
- struct ata_port *ap = adev->link->ap;
- int slop = buflen & 3;
- unsigned long flags;
+ if (ata_id_has_dword_io(dev->id)) {
+ struct ata_port *ap = dev->link->ap;
+ int slop = buflen & 3;
+ unsigned long flags;
- if (ata_id_has_dword_io(adev->id)) {
local_irq_save(flags);
/* Perform the 32bit I/O synchronization sequence */
@@ -264,26 +349,27 @@ static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsig
ioread8(ap->ioaddr.nsect_addr);
/* Now the data */
-
- if (write_data)
- iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
- else
+ if (rw == READ)
ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
+ else
+ iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
if (unlikely(slop)) {
- __le32 pad = 0;
- if (write_data) {
- memcpy(&pad, buf + buflen - slop, slop);
- iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
- } else {
+ u32 pad;
+ if (rw == READ) {
pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
memcpy(buf + buflen - slop, &pad, slop);
+ } else {
+ memcpy(&pad, buf + buflen - slop, slop);
+ iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
}
+ buflen += 4 - slop;
}
local_irq_restore(flags);
- }
- else
- ata_data_xfer_noirq(adev, buf, buflen, write_data);
+ } else
+ buflen = ata_data_xfer_noirq(dev, buf, buflen, rw);
+
+ return buflen;
}
static struct ata_port_operations pdc20230_port_ops = {
@@ -310,14 +396,14 @@ static struct ata_port_operations pdc20230_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
/*
* Holtek 6560A support
*
- * This controller supports PIO0 to PIO2 (no IORDY even though higher timings
- * can be loaded).
+ * This controller supports PIO0 to PIO2 (no IORDY even though higher
+ * timings can be loaded).
*/
static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -364,14 +450,14 @@ static struct ata_port_operations ht6560a_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
/*
* Holtek 6560B support
*
- * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO setting
- * unless we see an ATAPI device in which case we force it off.
+ * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO
+ * setting unless we see an ATAPI device in which case we force it off.
*
* FIXME: need to implement 2nd channel support.
*/
@@ -398,7 +484,7 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev)
if (adev->class != ATA_DEV_ATA) {
u8 rconf = inb(0x3E6);
if (rconf & 0x24) {
- rconf &= ~ 0x24;
+ rconf &= ~0x24;
outb(rconf, 0x3E6);
}
}
@@ -423,13 +509,13 @@ static struct ata_port_operations ht6560b_port_ops = {
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */
+ .data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
/*
@@ -462,7 +548,8 @@ static u8 opti_syscfg(u8 reg)
* This controller supports PIO0 to PIO3.
*/
-static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev)
+static void opti82c611a_set_piomode(struct ata_port *ap,
+ struct ata_device *adev)
{
u8 active, recover, setup;
struct ata_timing t;
@@ -549,7 +636,7 @@ static struct ata_port_operations opti82c611a_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
/*
@@ -681,77 +768,398 @@ static struct ata_port_operations opti82c46x_port_ops = {
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .port_start = ata_sff_port_start,
};
+static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_timing t;
+ struct legacy_data *qdi = ap->host->private_data;
+ int active, recovery;
+ u8 timing;
+
+ /* Get the timing data in cycles */
+ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+ if (qdi->fast) {
+ active = 8 - FIT(t.active, 1, 8);
+ recovery = 18 - FIT(t.recover, 3, 18);
+ } else {
+ active = 9 - FIT(t.active, 2, 9);
+ recovery = 15 - FIT(t.recover, 0, 15);
+ }
+ timing = (recovery << 4) | active | 0x08;
+
+ qdi->clock[adev->devno] = timing;
+
+ outb(timing, qdi->timing);
+}
/**
- * legacy_init_one - attach a legacy interface
- * @port: port number
- * @io: I/O port start
- * @ctrl: control port
+ * qdi6580dp_set_piomode - PIO setup for dual channel
+ * @ap: Port
+ * @adev: Device
* @irq: interrupt line
*
- * Register an ISA bus IDE interface. Such interfaces are PIO and we
- * assume do not support IRQ sharing.
+ * In dual channel mode the 6580 has one clock per channel and we have
+ * to software clockswitch in qc_issue_prot.
*/
-static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq)
+static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
- struct legacy_data *ld = &legacy_data[nr_legacy_host];
- struct ata_host *host;
- struct ata_port *ap;
- struct platform_device *pdev;
- struct ata_port_operations *ops = &legacy_port_ops;
- void __iomem *io_addr, *ctrl_addr;
- int pio_modes = pio_mask;
- u32 mask = (1 << port);
- u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY;
- int ret;
+ struct ata_timing t;
+ struct legacy_data *qdi = ap->host->private_data;
+ int active, recovery;
+ u8 timing;
- pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
+ /* Get the timing data in cycles */
+ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+ if (qdi->fast) {
+ active = 8 - FIT(t.active, 1, 8);
+ recovery = 18 - FIT(t.recover, 3, 18);
+ } else {
+ active = 9 - FIT(t.active, 2, 9);
+ recovery = 15 - FIT(t.recover, 0, 15);
+ }
+ timing = (recovery << 4) | active | 0x08;
- ret = -EBUSY;
- if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL ||
- devm_request_region(&pdev->dev, ctrl, 1, "pata_legacy") == NULL)
- goto fail;
+ qdi->clock[adev->devno] = timing;
- ret = -ENOMEM;
- io_addr = devm_ioport_map(&pdev->dev, io, 8);
- ctrl_addr = devm_ioport_map(&pdev->dev, ctrl, 1);
- if (!io_addr || !ctrl_addr)
- goto fail;
+ outb(timing, qdi->timing + 2 * ap->port_no);
+ /* Clear the FIFO */
+ if (adev->class != ATA_DEV_ATA)
+ outb(0x5F, qdi->timing + 3);
+}
- if (ht6560a & mask) {
- ops = &ht6560a_port_ops;
- pio_modes = 0x07;
- iordy = ATA_FLAG_NO_IORDY;
- }
- if (ht6560b & mask) {
- ops = &ht6560b_port_ops;
- pio_modes = 0x1F;
- }
- if (opti82c611a & mask) {
- ops = &opti82c611a_port_ops;
- pio_modes = 0x0F;
+/**
+ * qdi6580_set_piomode - PIO setup for single channel
+ * @ap: Port
+ * @adev: Device
+ *
+ * In single channel mode the 6580 has one clock per device and we can
+ * avoid the requirement to clock switch. We also have to load the timing
+ * into the right clock according to whether we are master or slave.
+ */
+
+static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_timing t;
+ struct legacy_data *qdi = ap->host->private_data;
+ int active, recovery;
+ u8 timing;
+
+ /* Get the timing data in cycles */
+ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+ if (qdi->fast) {
+ active = 8 - FIT(t.active, 1, 8);
+ recovery = 18 - FIT(t.recover, 3, 18);
+ } else {
+ active = 9 - FIT(t.active, 2, 9);
+ recovery = 15 - FIT(t.recover, 0, 15);
}
- if (opti82c46x & mask) {
- ops = &opti82c46x_port_ops;
- pio_modes = 0x0F;
+ timing = (recovery << 4) | active | 0x08;
+ qdi->clock[adev->devno] = timing;
+ outb(timing, qdi->timing + 2 * adev->devno);
+ /* Clear the FIFO */
+ if (adev->class != ATA_DEV_ATA)
+ outb(0x5F, qdi->timing + 3);
+}
+
+/**
+ * qdi_qc_issue_prot - command issue
+ * @qc: command pending
+ *
+ * Called when the libata layer is about to issue a command. We wrap
+ * this interface so that we can load the correct ATA timings.
+ */
+
+static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+ struct legacy_data *qdi = ap->host->private_data;
+
+ if (qdi->clock[adev->devno] != qdi->last) {
+ if (adev->pio_mode) {
+ qdi->last = qdi->clock[adev->devno];
+ outb(qdi->clock[adev->devno], qdi->timing +
+ 2 * ap->port_no);
+ }
}
+ return ata_qc_issue_prot(qc);
+}
- /* Probe for automatically detectable controllers */
+static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
+ unsigned int buflen, int rw)
+{
+ struct ata_port *ap = adev->link->ap;
+ int slop = buflen & 3;
- if (io == 0x1F0 && ops == &legacy_port_ops) {
- unsigned long flags;
+ if (ata_id_has_dword_io(adev->id)) {
+ if (rw == WRITE)
+ iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
+ else
+ ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
- local_irq_save(flags);
+ if (unlikely(slop)) {
+ u32 pad;
+ if (rw == WRITE) {
+ memcpy(&pad, buf + buflen - slop, slop);
+ pad = le32_to_cpu(pad);
+ iowrite32(pad, ap->ioaddr.data_addr);
+ } else {
+ pad = ioread32(ap->ioaddr.data_addr);
+ pad = cpu_to_le32(pad);
+ memcpy(buf + buflen - slop, &pad, slop);
+ }
+ }
+ return (buflen + 3) & ~3;
+ } else
+ return ata_data_xfer(adev, buf, buflen, rw);
+}
+
+static int qdi_port(struct platform_device *dev,
+ struct legacy_probe *lp, struct legacy_data *ld)
+{
+ if (devm_request_region(&dev->dev, lp->private, 4, "qdi") == NULL)
+ return -EBUSY;
+ ld->timing = lp->private;
+ return 0;
+}
+
+static struct ata_port_operations qdi6500_port_ops = {
+ .set_piomode = qdi6500_set_piomode,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = qdi_qc_issue_prot,
+
+ .data_xfer = vlb32_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+
+ .port_start = ata_sff_port_start,
+};
+
+static struct ata_port_operations qdi6580_port_ops = {
+ .set_piomode = qdi6580_set_piomode,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .data_xfer = vlb32_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+
+ .port_start = ata_sff_port_start,
+};
+
+static struct ata_port_operations qdi6580dp_port_ops = {
+ .set_piomode = qdi6580dp_set_piomode,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = qdi_qc_issue_prot,
+
+ .data_xfer = vlb32_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+
+ .port_start = ata_sff_port_start,
+};
+
+static DEFINE_SPINLOCK(winbond_lock);
+
+static void winbond_writecfg(unsigned long port, u8 reg, u8 val)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&winbond_lock, flags);
+ outb(reg, port + 0x01);
+ outb(val, port + 0x02);
+ spin_unlock_irqrestore(&winbond_lock, flags);
+}
+
+static u8 winbond_readcfg(unsigned long port, u8 reg)
+{
+ u8 val;
+
+ unsigned long flags;
+ spin_lock_irqsave(&winbond_lock, flags);
+ outb(reg, port + 0x01);
+ val = inb(port + 0x02);
+ spin_unlock_irqrestore(&winbond_lock, flags);
+
+ return val;
+}
+
+static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_timing t;
+ struct legacy_data *winbond = ap->host->private_data;
+ int active, recovery;
+ u8 reg;
+ int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2);
+
+ reg = winbond_readcfg(winbond->timing, 0x81);
+
+ /* Get the timing data in cycles */
+ if (reg & 0x40) /* Fast VLB bus, assume 50MHz */
+ ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
+ else
+ ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+
+ active = (FIT(t.active, 3, 17) - 1) & 0x0F;
+ recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
+ timing = (active << 4) | recovery;
+ winbond_writecfg(winbond->timing, timing, reg);
+
+ /* Load the setup timing */
+
+ reg = 0x35;
+ if (adev->class != ATA_DEV_ATA)
+ reg |= 0x08; /* FIFO off */
+ if (!ata_pio_need_iordy(adev))
+ reg |= 0x02; /* IORDY off */
+ reg |= (FIT(t.setup, 0, 3) << 6);
+ winbond_writecfg(winbond->timing, timing + 1, reg);
+}
+
+static int winbond_port(struct platform_device *dev,
+ struct legacy_probe *lp, struct legacy_data *ld)
+{
+ if (devm_request_region(&dev->dev, lp->private, 4, "winbond") == NULL)
+ return -EBUSY;
+ ld->timing = lp->private;
+ return 0;
+}
+
+static struct ata_port_operations winbond_port_ops = {
+ .set_piomode = winbond_set_piomode,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .data_xfer = vlb32_data_xfer,
+
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+ .port_start = ata_sff_port_start,
+};
+
+static struct legacy_controller controllers[] = {
+ {"BIOS", &legacy_port_ops, 0x1F,
+ ATA_FLAG_NO_IORDY, NULL },
+ {"Snooping", &simple_port_ops, 0x1F,
+ 0 , NULL },
+ {"PDC20230", &pdc20230_port_ops, 0x7,
+ ATA_FLAG_NO_IORDY, NULL },
+ {"HT6560A", &ht6560a_port_ops, 0x07,
+ ATA_FLAG_NO_IORDY, NULL },
+ {"HT6560B", &ht6560b_port_ops, 0x1F,
+ ATA_FLAG_NO_IORDY, NULL },
+ {"OPTI82C611A", &opti82c611a_port_ops, 0x0F,
+ 0 , NULL },
+ {"OPTI82C46X", &opti82c46x_port_ops, 0x0F,
+ 0 , NULL },
+ {"QDI6500", &qdi6500_port_ops, 0x07,
+ ATA_FLAG_NO_IORDY, qdi_port },
+ {"QDI6580", &qdi6580_port_ops, 0x1F,
+ 0 , qdi_port },
+ {"QDI6580DP", &qdi6580dp_port_ops, 0x1F,
+ 0 , qdi_port },
+ {"W83759A", &winbond_port_ops, 0x1F,
+ 0 , winbond_port }
+};
+
+/**
+ * probe_chip_type - Discover controller
+ * @probe: Probe entry to check
+ *
+ * Probe an ATA port and identify the type of controller. We don't
+ * check if the controller appears to be driveless at this point.
+ */
+
+static __init int probe_chip_type(struct legacy_probe *probe)
+{
+ int mask = 1 << probe->slot;
+
+ if (winbond && (probe->port == 0x1F0 || probe->port == 0x170)) {
+ u8 reg = winbond_readcfg(winbond, 0x81);
+ reg |= 0x80; /* jumpered mode off */
+ winbond_writecfg(winbond, 0x81, reg);
+ reg = winbond_readcfg(winbond, 0x83);
+ reg |= 0xF0; /* local control */
+ winbond_writecfg(winbond, 0x83, reg);
+ reg = winbond_readcfg(winbond, 0x85);
+ reg |= 0xF0; /* programmable timing */
+ winbond_writecfg(winbond, 0x85, reg);
+
+ reg = winbond_readcfg(winbond, 0x81);
+
+ if (reg & mask)
+ return W83759A;
+ }
+ if (probe->port == 0x1F0) {
+ unsigned long flags;
+ local_irq_save(flags);
/* Probes */
- inb(0x1F5);
outb(inb(0x1F2) | 0x80, 0x1F2);
+ inb(0x1F5);
inb(0x1F2);
inb(0x3F6);
inb(0x3F6);
@@ -760,29 +1168,83 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl
if ((inb(0x1F2) & 0x80) == 0) {
/* PDC20230c or 20630 ? */
- printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n");
- pio_modes = 0x07;
- ops = &pdc20230_port_ops;
- iordy = ATA_FLAG_NO_IORDY;
+ printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller"
+ " detected.\n");
udelay(100);
inb(0x1F5);
+ local_irq_restore(flags);
+ return PDC20230;
} else {
outb(0x55, 0x1F2);
inb(0x1F2);
inb(0x1F2);
- if (inb(0x1F2) == 0x00) {
- printk(KERN_INFO "PDC20230-B VLB ATA controller detected.\n");
- }
+ if (inb(0x1F2) == 0x00)
+ printk(KERN_INFO "PDC20230-B VLB ATA "
+ "controller detected.\n");
+ local_irq_restore(flags);
+ return BIOS;
}
local_irq_restore(flags);
}
+ if (ht6560a & mask)
+ return HT6560A;
+ if (ht6560b & mask)
+ return HT6560B;
+ if (opti82c611a & mask)
+ return OPTI611A;
+ if (opti82c46x & mask)
+ return OPTI46X;
+ if (autospeed & mask)
+ return SNOOP;
+ return BIOS;
+}
+
+
+/**
+ * legacy_init_one - attach a legacy interface
+ * @pl: probe record
+ *
+ * Register an ISA bus IDE interface. Such interfaces are PIO and we
+ * assume do not support IRQ sharing.
+ */
+
+static __init int legacy_init_one(struct legacy_probe *probe)
+{
+ struct legacy_controller *controller = &controllers[probe->type];
+ int pio_modes = controller->pio_mask;
+ unsigned long io = probe->port;
+ u32 mask = (1 << probe->slot);
+ struct ata_port_operations *ops = controller->ops;
+ struct legacy_data *ld = &legacy_data[probe->slot];
+ struct ata_host *host = NULL;
+ struct ata_port *ap;
+ struct platform_device *pdev;
+ struct ata_device *dev;
+ void __iomem *io_addr, *ctrl_addr;
+ u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY;
+ int ret;
- /* Chip does mode setting by command snooping */
- if (ops == &legacy_port_ops && (autospeed & mask))
- ops = &simple_port_ops;
+ iordy |= controller->flags;
+
+ pdev = platform_device_register_simple(DRV_NAME, probe->slot, NULL, 0);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ ret = -EBUSY;
+ if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL ||
+ devm_request_region(&pdev->dev, io + 0x0206, 1,
+ "pata_legacy") == NULL)
+ goto fail;
ret = -ENOMEM;
+ io_addr = devm_ioport_map(&pdev->dev, io, 8);
+ ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1);
+ if (!io_addr || !ctrl_addr)
+ goto fail;
+ if (controller->setup)
+ if (controller->setup(pdev, probe, ld) < 0)
+ goto fail;
host = ata_host_alloc(&pdev->dev, 1);
if (!host)
goto fail;
@@ -795,19 +1257,29 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl
ap->ioaddr.altstatus_addr = ctrl_addr;
ap->ioaddr.ctl_addr = ctrl_addr;
ata_std_ports(&ap->ioaddr);
- ap->private_data = ld;
+ ap->host->private_data = ld;
- ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, ctrl);
+ ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206);
- ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht);
+ ret = ata_host_activate(host, probe->irq, ata_interrupt, 0,
+ &legacy_sht);
if (ret)
goto fail;
-
- legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev);
ld->platform_dev = pdev;
- return 0;
+ /* Nothing found means we drop the port as its probably not there */
+
+ ret = -ENODEV;
+ ata_link_for_each_dev(dev, &ap->link) {
+ if (!ata_dev_absent(dev)) {
+ legacy_host[probe->slot] = host;
+ ld->platform_dev = pdev;
+ return 0;
+ }
+ }
fail:
+ if (host)
+ ata_host_detach(host);
platform_device_unregister(pdev);
return ret;
}
@@ -818,13 +1290,15 @@ fail:
* @master: set this if we find an ATA master
* @master: set this if we find an ATA secondary
*
- * A small number of vendors implemented early PCI ATA interfaces on bridge logic
- * without the ATA interface being PCI visible. Where we have a matching PCI driver
- * we must skip the relevant device here. If we don't know about it then the legacy
- * driver is the right driver anyway.
+ * A small number of vendors implemented early PCI ATA interfaces
+ * on bridge logic without the ATA interface being PCI visible.
+ * Where we have a matching PCI driver we must skip the relevant
+ * device here. If we don't know about it then the legacy driver
+ * is the right driver anyway.
*/
-static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary)
+static void __init legacy_check_special_cases(struct pci_dev *p, int *primary,
+ int *secondary)
{
/* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */
if (p->vendor == 0x1078 && p->device == 0x0000) {
@@ -840,7 +1314,8 @@ static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *sec
if (p->vendor == 0x8086 && p->device == 0x1234) {
u16 r;
pci_read_config_word(p, 0x6C, &r);
- if (r & 0x8000) { /* ATA port enabled */
+ if (r & 0x8000) {
+ /* ATA port enabled */
if (r & 0x4000)
*secondary = 1;
else
@@ -850,6 +1325,114 @@ static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *sec
}
}
+static __init void probe_opti_vlb(void)
+{
+ /* If an OPTI 82C46X is present find out where the channels are */
+ static const char *optis[4] = {
+ "3/463MV", "5MV",
+ "5MVA", "5MVB"
+ };
+ u8 chans = 1;
+ u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6;
+
+ opti82c46x = 3; /* Assume master and slave first */
+ printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n",
+ optis[ctrl]);
+ if (ctrl == 3)
+ chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1;
+ ctrl = opti_syscfg(0xAC);
+ /* Check enabled and this port is the 465MV port. On the
+ MVB we may have two channels */
+ if (ctrl & 8) {
+ if (chans == 2) {
+ legacy_probe_add(0x1F0, 14, OPTI46X, 0);
+ legacy_probe_add(0x170, 15, OPTI46X, 0);
+ }
+ if (ctrl & 4)
+ legacy_probe_add(0x170, 15, OPTI46X, 0);
+ else
+ legacy_probe_add(0x1F0, 14, OPTI46X, 0);
+ } else
+ legacy_probe_add(0x1F0, 14, OPTI46X, 0);
+}
+
+static __init void qdi65_identify_port(u8 r, u8 res, unsigned long port)
+{
+ static const unsigned long ide_port[2] = { 0x170, 0x1F0 };
+ /* Check card type */
+ if ((r & 0xF0) == 0xC0) {
+ /* QD6500: single channel */
+ if (r & 8)
+ /* Disabled ? */
+ return;
+ legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01),
+ QDI6500, port);
+ }
+ if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) {
+ /* QD6580: dual channel */
+ if (!request_region(port + 2 , 2, "pata_qdi")) {
+ release_region(port, 2);
+ return;
+ }
+ res = inb(port + 3);
+ /* Single channel mode ? */
+ if (res & 1)
+ legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01),
+ QDI6580, port);
+ else { /* Dual channel mode */
+ legacy_probe_add(0x1F0, 14, QDI6580DP, port);
+ /* port + 0x02, r & 0x04 */
+ legacy_probe_add(0x170, 15, QDI6580DP, port + 2);
+ }
+ release_region(port + 2, 2);
+ }
+}
+
+static __init void probe_qdi_vlb(void)
+{
+ unsigned long flags;
+ static const unsigned long qd_port[2] = { 0x30, 0xB0 };
+ int i;
+
+ /*
+ * Check each possible QD65xx base address
+ */
+
+ for (i = 0; i < 2; i++) {
+ unsigned long port = qd_port[i];
+ u8 r, res;
+
+
+ if (request_region(port, 2, "pata_qdi")) {
+ /* Check for a card */
+ local_irq_save(flags);
+ /* I have no h/w that needs this delay but it
+ is present in the historic code */
+ r = inb(port);
+ udelay(1);
+ outb(0x19, port);
+ udelay(1);
+ res = inb(port);
+ udelay(1);
+ outb(r, port);
+ udelay(1);
+ local_irq_restore(flags);
+
+ /* Fail */
+ if (res == 0x19) {
+ release_region(port, 2);
+ continue;
+ }
+ /* Passes the presence test */
+ r = inb(port + 1);
+ udelay(1);
+ /* Check port agrees with port set */
+ if ((r & 2) >> 1 == i)
+ qdi65_identify_port(r, res, port);
+ release_region(port, 2);
+ }
+ }
+}
/**
* legacy_init - attach legacy interfaces
@@ -867,15 +1450,17 @@ static __init int legacy_init(void)
int ct = 0;
int primary = 0;
int secondary = 0;
- int last_port = NR_HOST;
+ int pci_present = 0;
+ struct legacy_probe *pl = &probe_list[0];
+ int slot = 0;
struct pci_dev *p = NULL;
for_each_pci_dev(p) {
int r;
- /* Check for any overlap of the system ATA mappings. Native mode controllers
- stuck on these addresses or some devices in 'raid' mode won't be found by
- the storage class test */
+ /* Check for any overlap of the system ATA mappings. Native
+ mode controllers stuck on these addresses or some devices
+ in 'raid' mode won't be found by the storage class test */
for (r = 0; r < 6; r++) {
if (pci_resource_start(p, r) == 0x1f0)
primary = 1;
@@ -885,49 +1470,39 @@ static __init int legacy_init(void)
/* Check for special cases */
legacy_check_special_cases(p, &primary, &secondary);
- /* If PCI bus is present then don't probe for tertiary legacy ports */
- if (probe_all == 0)
- last_port = 2;
+ /* If PCI bus is present then don't probe for tertiary
+ legacy ports */
+ pci_present = 1;
}
- /* If an OPTI 82C46X is present find out where the channels are */
- if (opti82c46x) {
- static const char *optis[4] = {
- "3/463MV", "5MV",
- "5MVA", "5MVB"
- };
- u8 chans = 1;
- u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6;
-
- opti82c46x = 3; /* Assume master and slave first */
- printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]);
- if (ctrl == 3)
- chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1;
- ctrl = opti_syscfg(0xAC);
- /* Check enabled and this port is the 465MV port. On the
- MVB we may have two channels */
- if (ctrl & 8) {
- if (ctrl & 4)
- opti82c46x = 2; /* Slave */
- else
- opti82c46x = 1; /* Master */
- if (chans == 2)
- opti82c46x = 3; /* Master and Slave */
- } /* Slave only */
- else if (chans == 1)
- opti82c46x = 1;
+ if (winbond == 1)
+ winbond = 0x130; /* Default port, alt is 1B0 */
+
+ if (primary == 0 || all)
+ legacy_probe_add(0x1F0, 14, UNKNOWN, 0);
+ if (secondary == 0 || all)
+ legacy_probe_add(0x170, 15, UNKNOWN, 0);
+
+ if (probe_all || !pci_present) {
+ /* ISA/VLB extra ports */
+ legacy_probe_add(0x1E8, 11, UNKNOWN, 0);
+ legacy_probe_add(0x168, 10, UNKNOWN, 0);
+ legacy_probe_add(0x1E0, 8, UNKNOWN, 0);
+ legacy_probe_add(0x160, 12, UNKNOWN, 0);
}
- for (i = 0; i < last_port; i++) {
- /* Skip primary if we have seen a PCI one */
- if (i == 0 && primary == 1)
- continue;
- /* Skip secondary if we have seen a PCI one */
- if (i == 1 && secondary == 1)
+ if (opti82c46x)
+ probe_opti_vlb();
+ if (qdi)
+ probe_qdi_vlb();
+
+ for (i = 0; i < NR_HOST; i++, pl++) {
+ if (pl->port == 0)
continue;
- if (legacy_init_one(i, legacy_port[i],
- legacy_port[i] + 0x0206,
- legacy_irq[i]) == 0)
+ if (pl->type == UNKNOWN)
+ pl->type = probe_chip_type(pl);
+ pl->slot = slot++;
+ if (legacy_init_one(pl) == 0)
ct++;
}
if (ct != 0)
@@ -941,11 +1516,8 @@ static __exit void legacy_exit(void)
for (i = 0; i < nr_legacy_host; i++) {
struct legacy_data *ld = &legacy_data[i];
-
ata_host_detach(legacy_host[i]);
platform_device_unregister(ld->platform_dev);
- if (ld->timing)
- release_region(ld->timing, 2);
}
}
@@ -960,9 +1532,9 @@ module_param(ht6560a, int, 0);
module_param(ht6560b, int, 0);
module_param(opti82c611a, int, 0);
module_param(opti82c46x, int, 0);
+module_param(qdi, int, 0);
module_param(pio_mask, int, 0);
module_param(iordy_mask, int, 0);
module_init(legacy_init);
module_exit(legacy_exit);
-
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 50c56e2..dc40162 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -364,7 +364,7 @@ mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match)
{
unsigned int ipb_freq;
struct resource res_mem;
- int ata_irq = NO_IRQ;
+ int ata_irq;
struct mpc52xx_ata __iomem *ata_regs;
struct mpc52xx_ata_priv *priv;
int rv;
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
new file mode 100644
index 0000000..1c1b835
--- /dev/null
+++ b/drivers/ata/pata_ninja32.c
@@ -0,0 +1,214 @@
+/*
+ * pata_ninja32.c - Ninja32 PATA for new ATA layer
+ * (C) 2007 Red Hat Inc
+ * Alan Cox <alan@...hat.com>
+ *
+ * Note: The controller like many controllers has shared timings for
+ * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back
+ * in the dma_stop function. Thus we actually don't need a set_dmamode
+ * method as the PIO method is always called and will set the right PIO
+ * timing parameters.
+ *
+ * The Ninja32 Cardbus is not a generic SFF controller. Instead it is
+ * laid out as follows off BAR 0. This is based upon Mark Lord's delkin
+ * driver and the extensive analysis done by the BSD developers, notably
+ * ITOH Yasufumi.
+ *
+ * Base + 0x00 IRQ Status
+ * Base + 0x01 IRQ control
+ * Base + 0x02 Chipset control
+ * Base + 0x04 VDMA and reset control + wait bits
+ * Base + 0x08 BMIMBA
+ * Base + 0x0C DMA Length
+ * Base + 0x10 Taskfile
+ * Base + 0x18 BMDMA Status ?
+ * Base + 0x1C
+ * Base + 0x1D Bus master control
+ * bit 0 = enable
+ * bit 1 = 0 write/1 read
+ * bit 2 = 1 sgtable
+ * bit 3 = go
+ * bit 4-6 wait bits
+ * bit 7 = done
+ * Base + 0x1E AltStatus
+ * Base + 0x1F timing register
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_ninja32"
+#define DRV_VERSION "0.0.1"
+
+
+/**
+ * ninja32_set_piomode - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Called to do the PIO mode setup. Our timing registers are shared
+ * but we want to set the PIO timing by default.
+ */
+
+static void ninja32_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ static u16 pio_timing[5] = {
+ 0xd6, 0x85, 0x44, 0x33, 0x13
+ };
+ iowrite8(pio_timing[adev->pio_mode - XFER_PIO_0],
+ ap->ioaddr.bmdma_addr + 0x1f);
+ ap->private_data = adev;
+}
+
+
+static void ninja32_dev_select(struct ata_port *ap, unsigned int device)
+{
+ struct ata_device *adev = &ap->link.device[device];
+ if (ap->private_data != adev) {
+ iowrite8(0xd6, ap->ioaddr.bmdma_addr + 0x1f);
+ ata_std_dev_select(ap, device);
+ ninja32_set_piomode(ap, adev);
+ }
+}
+
+static struct scsi_host_template ninja32_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct ata_port_operations ninja32_port_ops = {
+ .set_piomode = ninja32_set_piomode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ninja32_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .data_xfer = ata_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+
+ .port_start = ata_sff_port_start,
+};
+
+static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ struct ata_host *host;
+ struct ata_port *ap;
+ void __iomem *base;
+ int rc;
+
+ host = ata_host_alloc(&dev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+ ap = host->ports[0];
+
+ /* Set up the PCI device */
+ rc = pcim_enable_device(dev);
+ if (rc)
+ return rc;
+ rc = pcim_iomap_regions(dev, 1 << 0, DRV_NAME);
+ if (rc == -EBUSY)
+ pcim_pin_device(dev);
+ if (rc)
+ return rc;
+
+ host->iomap = pcim_iomap_table(dev);
+ rc = pci_set_dma_mask(dev, ATA_DMA_MASK);
+ if (rc)
+ return rc;
+ rc = pci_set_consistent_dma_mask(dev, ATA_DMA_MASK);
+ if (rc)
+ return rc;
+ pci_set_master(dev);
+
+ /* Set up the register mappings */
+ base = host->iomap[0];
+ if (!base)
+ return -ENOMEM;
+ ap->ops = &ninja32_port_ops;
+ ap->pio_mask = 0x1F;
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
+
+ ap->ioaddr.cmd_addr = base + 0x10;
+ ap->ioaddr.ctl_addr = base + 0x1E;
+ ap->ioaddr.altstatus_addr = base + 0x1E;
+ ap->ioaddr.bmdma_addr = base;
+ ata_std_ports(&ap->ioaddr);
+
+ iowrite8(0x05, base + 0x01); /* Enable interrupt lines */
+ iowrite8(0xB3, base + 0x02); /* Burst, ?? setup */
+ iowrite8(0x00, base + 0x04); /* WAIT0 ? */
+ /* FIXME: Should we disable them at remove ? */
+ return ata_host_activate(host, dev->irq, ata_interrupt,
+ IRQF_SHARED, &ninja32_sht);
+}
+
+static const struct pci_device_id ninja32[] = {
+ { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { },
+};
+
+static struct pci_driver ninja32_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = ninja32,
+ .probe = ninja32_init_one,
+ .remove = ata_pci_remove_one
+};
+
+static int __init ninja32_init(void)
+{
+ return pci_register_driver(&ninja32_pci_driver);
+}
+
+static void __exit ninja32_exit(void)
+{
+ pci_unregister_driver(&ninja32_pci_driver);
+}
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for Ninja32 ATA");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, ninja32);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(ninja32_init);
+module_exit(ninja32_exit);
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index fd36099..3e7f6a9 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -42,7 +42,7 @@
#define DRV_NAME "pata_pcmcia"
-#define DRV_VERSION "0.3.2"
+#define DRV_VERSION "0.3.3"
/*
* Private data structure to glue stuff together
@@ -86,6 +86,47 @@ static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_d
return ata_do_set_mode(link, r_failed_dev);
}
+/**
+ * pcmcia_set_mode_8bit - PCMCIA specific mode setup
+ * @link: link
+ * @r_failed_dev: Return pointer for failed device
+ *
+ * For the simple emulated 8bit stuff the less we do the better.
+ */
+
+static int pcmcia_set_mode_8bit(struct ata_link *link,
+ struct ata_device **r_failed_dev)
+{
+ return 0;
+}
+
+/**
+ * ata_data_xfer_8bit - Transfer data by 8bit PIO
+ * @dev: device to target
+ * @buf: data buffer
+ * @buflen: buffer length
+ * @rw: read/write
+ *
+ * Transfer data from/to the device data register by 8 bit PIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw)
+{
+ struct ata_port *ap = dev->link->ap;
+
+ if (rw == READ)
+ ioread8_rep(ap->ioaddr.data_addr, buf, buflen);
+ else
+ iowrite8_rep(ap->ioaddr.data_addr, buf, buflen);
+
+ return buflen;
+}
+
+
static struct scsi_host_template pcmcia_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
@@ -129,6 +170,31 @@ static struct ata_port_operations pcmcia_port_ops = {
.port_start = ata_sff_port_start,
};
+static struct ata_port_operations pcmcia_8bit_port_ops = {
+ .set_mode = pcmcia_set_mode_8bit,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .data_xfer = ata_data_xfer_8bit,
+
+ .irq_clear = ata_bmdma_irq_clear,
+ .irq_on = ata_irq_on,
+
+ .port_start = ata_sff_port_start,
+};
+
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
@@ -153,9 +219,12 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
cistpl_cftable_entry_t dflt;
} *stk = NULL;
cistpl_cftable_entry_t *cfg;
- int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM;
+ int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
unsigned long io_base, ctl_base;
void __iomem *io_addr, *ctl_addr;
+ int n_ports = 1;
+
+ struct ata_port_operations *ops = &pcmcia_port_ops;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (info == NULL)
@@ -282,27 +351,32 @@ next_entry:
/* FIXME: Could be more ports at base + 0x10 but we only deal with
one right now */
if (pdev->io.NumPorts1 >= 0x20)
- printk(KERN_WARNING DRV_NAME ": second channel not yet supported.\n");
+ n_ports = 2;
+ if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620)
+ ops = &pcmcia_8bit_port_ops;
/*
* Having done the PCMCIA plumbing the ATA side is relatively
* sane.
*/
ret = -ENOMEM;
- host = ata_host_alloc(&pdev->dev, 1);
+ host = ata_host_alloc(&pdev->dev, n_ports);
if (!host)
goto failed;
- ap = host->ports[0];
- ap->ops = &pcmcia_port_ops;
- ap->pio_mask = 1; /* ISA so PIO 0 cycles */
- ap->flags |= ATA_FLAG_SLAVE_POSS;
- ap->ioaddr.cmd_addr = io_addr;
- ap->ioaddr.altstatus_addr = ctl_addr;
- ap->ioaddr.ctl_addr = ctl_addr;
- ata_std_ports(&ap->ioaddr);
+ for (p = 0; p < n_ports; p++) {
+ ap = host->ports[p];
- ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
+ ap->ops = ops;
+ ap->pio_mask = 1; /* ISA so PIO 0 cycles */
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
+ ap->ioaddr.cmd_addr = io_addr + 0x10 * p;
+ ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p;
+ ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p;
+ ata_std_ports(&ap->ioaddr);
+
+ ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
+ }
/* activate */
ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt,
@@ -360,6 +434,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 2622577..028af5d 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -348,7 +348,7 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long
ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
ATA_ID_PROD_LEN + 1);
/* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */
- if (strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6)
+ if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6)
mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
return ata_pci_default_filter(adev, mask);
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 6c9689b..3ed8667 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -168,8 +168,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
pdc202xx_set_dmamode(ap, qc->dev);
/* Cases the state machine will not complete correctly without help */
- if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATA_PROT_ATAPI_DMA)
- {
+ if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATAPI_PROT_DMA) {
len = qc->nbytes / 2;
if (tf->flags & ATA_TFLAG_WRITE)
@@ -208,7 +207,7 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
void __iomem *atapi_reg = master + 0x20 + (4 * ap->port_no);
/* Cases the state machine will not complete correctly */
- if (tf->protocol == ATA_PROT_ATAPI_DMA || ( tf->flags & ATA_TFLAG_LBA48)) {
+ if (tf->protocol == ATAPI_PROT_DMA || (tf->flags & ATA_TFLAG_LBA48)) {
iowrite32(0, atapi_reg);
iowrite8(ioread8(clock) & ~sel66, clock);
}
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index a4c0e50..9f308ed 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -124,29 +124,33 @@ static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
return ata_qc_issue_prot(qc);
}
-static void qdi_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data)
+static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf,
+ unsigned int buflen, int rw)
{
- struct ata_port *ap = adev->link->ap;
- int slop = buflen & 3;
+ if (ata_id_has_dword_io(dev->id)) {
+ struct ata_port *ap = dev->link->ap;
+ int slop = buflen & 3;
- if (ata_id_has_dword_io(adev->id)) {
- if (write_data)
- iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
- else
+ if (rw == READ)
ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
+ else
+ iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
if (unlikely(slop)) {
- __le32 pad = 0;
- if (write_data) {
- memcpy(&pad, buf + buflen - slop, slop);
- iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
- } else {
+ u32 pad;
+ if (rw == READ) {
pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
memcpy(buf + buflen - slop, &pad, slop);
+ } else {
+ memcpy(&pad, buf + buflen - slop, slop);
+ iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
}
+ buflen += 4 - slop;
}
} else
- ata_data_xfer(adev, buf, buflen, write_data);
+ buflen = ata_data_xfer(dev, buf, buflen, rw);
+
+ return buflen;
}
static struct scsi_host_template qdi_sht = {
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index ea2ef9f..55055b2 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -768,45 +768,47 @@ static u8 scc_bmdma_status (struct ata_port *ap)
/**
* scc_data_xfer - Transfer data by PIO
- * @adev: device for this I/O
+ * @dev: device for this I/O
* @buf: data buffer
* @buflen: buffer length
- * @write_data: read/write
+ * @rw: read/write
*
* Note: Original code is ata_data_xfer().
*/
-static void scc_data_xfer (struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data)
+static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
+ unsigned int buflen, int rw)
{
- struct ata_port *ap = adev->link->ap;
+ struct ata_port *ap = dev->link->ap;
unsigned int words = buflen >> 1;
unsigned int i;
u16 *buf16 = (u16 *) buf;
void __iomem *mmio = ap->ioaddr.data_addr;
/* Transfer multiple of 2 bytes */
- if (write_data) {
- for (i = 0; i < words; i++)
- out_be32(mmio, cpu_to_le16(buf16[i]));
- } else {
+ if (rw == READ)
for (i = 0; i < words; i++)
buf16[i] = le16_to_cpu(in_be32(mmio));
- }
+ else
+ for (i = 0; i < words; i++)
+ out_be32(mmio, cpu_to_le16(buf16[i]));
/* Transfer trailing 1 byte, if any. */
if (unlikely(buflen & 0x01)) {
u16 align_buf[1] = { 0 };
unsigned char *trailing_buf = buf + buflen - 1;
- if (write_data) {
- memcpy(align_buf, trailing_buf, 1);
- out_be32(mmio, cpu_to_le16(align_buf[0]));
- } else {
+ if (rw == READ) {
align_buf[0] = le16_to_cpu(in_be32(mmio));
memcpy(trailing_buf, align_buf, 1);
+ } else {
+ memcpy(align_buf, trailing_buf, 1);
+ out_be32(mmio, cpu_to_le16(align_buf[0]));
}
+ words++;
}
+
+ return words << 1;
}
/**
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 8bed888..9c523fb 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -41,7 +41,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_serverworks"
-#define DRV_VERSION "0.4.2"
+#define DRV_VERSION "0.4.3"
#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
@@ -102,7 +102,7 @@ static int osb4_cable(struct ata_port *ap) {
}
/**
- * csb4_cable - CSB5/6 cable detect
+ * csb_cable - CSB5/6 cable detect
* @ap: ATA port to check
*
* Serverworks default arrangement is to use the drive side detection
@@ -110,7 +110,7 @@ static int osb4_cable(struct ata_port *ap) {
*/
static int csb_cable(struct ata_port *ap) {
- return ATA_CBL_PATA80;
+ return ATA_CBL_PATA_UNK;
}
struct sv_cable_table {
@@ -231,7 +231,6 @@ static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned lo
return ata_pci_default_filter(adev, mask);
}
-
/**
* serverworks_set_piomode - set initial PIO mode data
* @ap: ATA interface
@@ -243,7 +242,7 @@ static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned lo
static void serverworks_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
static const u8 pio_mode[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
- int offset = 1 + (2 * ap->port_no) - adev->devno;
+ int offset = 1 + 2 * ap->port_no - adev->devno;
int devbits = (2 * ap->port_no + adev->devno) * 4;
u16 csb5_pio;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 453d72b..39627ab 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -185,7 +185,8 @@ static int via_cable_detect(struct ata_port *ap) {
if (ata66 & (0x10100000 >> (16 * ap->port_no)))
return ATA_CBL_PATA80;
/* Check with ACPI so we can spot BIOS reported SATA bridges */
- if (ata_acpi_cbl_80wire(ap))
+ if (ata_acpi_init_gtm(ap) &&
+ ata_acpi_cbl_80wire(ap, ata_acpi_init_gtm(ap)))
return ATA_CBL_PATA80;
return ATA_CBL_PATA40;
}
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 7116a9e..99c92ed 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -92,29 +92,33 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
-static void winbond_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data)
+static unsigned int winbond_data_xfer(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw)
{
- struct ata_port *ap = adev->link->ap;
+ struct ata_port *ap = dev->link->ap;
int slop = buflen & 3;
- if (ata_id_has_dword_io(adev->id)) {
- if (write_data)
- iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
- else
+ if (ata_id_has_dword_io(dev->id)) {
+ if (rw == READ)
ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
+ else
+ iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
if (unlikely(slop)) {
- __le32 pad = 0;
- if (write_data) {
- memcpy(&pad, buf + buflen - slop, slop);
- iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
- } else {
+ u32 pad;
+ if (rw == READ) {
pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
memcpy(buf + buflen - slop, &pad, slop);
+ } else {
+ memcpy(&pad, buf + buflen - slop, slop);
+ iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
}
+ buflen += 4 - slop;
}
} else
- ata_data_xfer(adev, buf, buflen, write_data);
+ buflen = ata_data_xfer(dev, buf, buflen, rw);
+
+ return buflen;
}
static struct scsi_host_template winbond_sht = {
@@ -191,7 +195,7 @@ static __init int winbond_init_one(unsigned long port)
reg = winbond_readcfg(port, 0x81);
if (!(reg & 0x03)) /* Disabled */
- return 0;
+ return -ENODEV;
for (i = 0; i < 2 ; i ++) {
unsigned long cmd_port = 0x1F0 - (0x80 * i);
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index bd4c2a3..8e1b7e9 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -321,8 +321,9 @@ static int adma_fill_sg(struct ata_queued_cmd *qc)
u8 *buf = pp->pkt, *last_buf = NULL;
int i = (2 + buf[3]) * 8;
u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0);
+ unsigned int si;
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
u32 addr;
u32 len;
@@ -455,7 +456,7 @@ static unsigned int adma_qc_issue(struct ata_queued_cmd *qc)
adma_packet_start(qc);
return 0;
- case ATA_PROT_ATAPI_DMA:
+ case ATAPI_PROT_DMA:
BUG();
break;
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index d015b4a..922d7b2 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -333,13 +333,14 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc,
struct prde *prd_ptr_to_indirect_ext = NULL;
unsigned indirect_ext_segment_sz = 0;
dma_addr_t indirect_ext_segment_paddr;
+ unsigned int si;
VPRINTK("SATA FSL : cd = 0x%x, prd = 0x%x\n", cmd_desc, prd);
indirect_ext_segment_paddr = cmd_desc_paddr +
SATA_FSL_CMD_DESC_OFFSET_TO_PRDT + SATA_FSL_MAX_PRD_DIRECT * 16;
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
dma_addr_t sg_addr = sg_dma_address(sg);
u32 sg_len = sg_dma_len(sg);
@@ -417,7 +418,7 @@ static void sata_fsl_qc_prep(struct ata_queued_cmd *qc)
}
/* setup "ACMD - atapi command" in cmd. desc. if this is ATAPI cmd */
- if (is_atapi_taskfile(&qc->tf)) {
+ if (ata_is_atapi(qc->tf.protocol)) {
desc_info |= ATAPI_CMD;
memset((void *)&cd->acmd, 0, 32);
memcpy((void *)&cd->acmd, qc->cdb, qc->dev->cdb_len);
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 323c087..96e614a 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -585,7 +585,7 @@ static struct ata_port_operations inic_port_ops = {
};
static struct ata_port_info inic_port_info = {
- /* For some reason, ATA_PROT_ATAPI is broken on this
+ /* For some reason, ATAPI_PROT_PIO is broken on this
* controller, and no, PIO_POLLING does't fix it. It somehow
* manages to report the wrong ireason and ignoring ireason
* results in machine lock up. Tell libata to always prefer
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 37b850a..7e72463 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1136,9 +1136,10 @@ static void mv_fill_sg(struct ata_queued_cmd *qc)
struct mv_port_priv *pp = qc->ap->private_data;
struct scatterlist *sg;
struct mv_sg *mv_sg, *last_sg = NULL;
+ unsigned int si;
mv_sg = pp->sg_tbl;
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
dma_addr_t addr = sg_dma_address(sg);
u32 sg_len = sg_dma_len(sg);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index ed5dc7c..a0f98fd 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1336,21 +1336,18 @@ static void nv_adma_fill_aprd(struct ata_queued_cmd *qc,
static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb)
{
struct nv_adma_port_priv *pp = qc->ap->private_data;
- unsigned int idx;
struct nv_adma_prd *aprd;
struct scatterlist *sg;
+ unsigned int si;
VPRINTK("ENTER\n");
- idx = 0;
-
- ata_for_each_sg(sg, qc) {
- aprd = (idx < 5) ? &cpb->aprd[idx] :
- &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (idx-5)];
- nv_adma_fill_aprd(qc, sg, idx, aprd);
- idx++;
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ aprd = (si < 5) ? &cpb->aprd[si] :
+ &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (si-5)];
+ nv_adma_fill_aprd(qc, sg, si, aprd);
}
- if (idx > 5)
+ if (si > 5)
cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->tag)));
else
cpb->next_aprd = cpu_to_le64(0);
@@ -1995,17 +1992,14 @@ static void nv_swncq_fill_sg(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct scatterlist *sg;
- unsigned int idx;
struct nv_swncq_port_priv *pp = ap->private_data;
struct ata_prd *prd;
-
- WARN_ON(qc->__sg == NULL);
- WARN_ON(qc->n_elem == 0 && qc->pad_len == 0);
+ unsigned int si, idx;
prd = pp->prd + ATA_MAX_PRD * qc->tag;
idx = 0;
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
u32 addr, offset;
u32 sg_len, len;
@@ -2027,8 +2021,7 @@ static void nv_swncq_fill_sg(struct ata_queued_cmd *qc)
}
}
- if (idx)
- prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+ prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
}
static unsigned int nv_swncq_issue_atacmd(struct ata_port *ap,
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 7914def..a07d319 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -450,19 +450,19 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc)
struct pdc_port_priv *pp = ap->private_data;
u8 *buf = pp->pkt;
u32 *buf32 = (u32 *) buf;
- unsigned int dev_sel, feature, nbytes;
+ unsigned int dev_sel, feature;
/* set control bits (byte 0), zero delay seq id (byte 3),
* and seq id (byte 2)
*/
switch (qc->tf.protocol) {
- case ATA_PROT_ATAPI_DMA:
+ case ATAPI_PROT_DMA:
if (!(qc->tf.flags & ATA_TFLAG_WRITE))
buf32[0] = cpu_to_le32(PDC_PKT_READ);
else
buf32[0] = 0;
break;
- case ATA_PROT_ATAPI_NODATA:
+ case ATAPI_PROT_NODATA:
buf32[0] = cpu_to_le32(PDC_PKT_NODATA);
break;
default:
@@ -473,45 +473,37 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc)
buf32[2] = 0; /* no next-packet */
/* select drive */
- if (sata_scr_valid(&ap->link)) {
+ if (sata_scr_valid(&ap->link))
dev_sel = PDC_DEVICE_SATA;
- } else {
- dev_sel = ATA_DEVICE_OBS;
- if (qc->dev->devno != 0)
- dev_sel |= ATA_DEV1;
- }
+ else
+ dev_sel = qc->tf.device;
+
buf[12] = (1 << 5) | ATA_REG_DEVICE;
buf[13] = dev_sel;
buf[14] = (1 << 5) | ATA_REG_DEVICE | PDC_PKT_CLEAR_BSY;
buf[15] = dev_sel; /* once more, waiting for BSY to clear */
buf[16] = (1 << 5) | ATA_REG_NSECT;
- buf[17] = 0x00;
+ buf[17] = qc->tf.nsect;
buf[18] = (1 << 5) | ATA_REG_LBAL;
- buf[19] = 0x00;
+ buf[19] = qc->tf.lbal;
/* set feature and byte counter registers */
- if (qc->tf.protocol != ATA_PROT_ATAPI_DMA) {
+ if (qc->tf.protocol != ATAPI_PROT_DMA)
feature = PDC_FEATURE_ATAPI_PIO;
- /* set byte counter register to real transfer byte count */
- nbytes = qc->nbytes;
- if (nbytes > 0xffff)
- nbytes = 0xffff;
- } else {
+ else
feature = PDC_FEATURE_ATAPI_DMA;
- /* set byte counter register to 0 */
- nbytes = 0;
- }
+
buf[20] = (1 << 5) | ATA_REG_FEATURE;
buf[21] = feature;
buf[22] = (1 << 5) | ATA_REG_BYTEL;
- buf[23] = nbytes & 0xFF;
+ buf[23] = qc->tf.lbam;
buf[24] = (1 << 5) | ATA_REG_BYTEH;
- buf[25] = (nbytes >> 8) & 0xFF;
+ buf[25] = qc->tf.lbah;
/* send ATAPI packet command 0xA0 */
buf[26] = (1 << 5) | ATA_REG_CMD;
- buf[27] = ATA_CMD_PACKET;
+ buf[27] = qc->tf.command;
/* select drive and check DRQ */
buf[28] = (1 << 5) | ATA_REG_DEVICE | PDC_PKT_WAIT_DRDY;
@@ -541,17 +533,15 @@ static void pdc_fill_sg(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct scatterlist *sg;
- unsigned int idx;
const u32 SG_COUNT_ASIC_BUG = 41*4;
+ unsigned int si, idx;
+ u32 len;
if (!(qc->flags & ATA_QCFLAG_DMAMAP))
return;
- WARN_ON(qc->__sg == NULL);
- WARN_ON(qc->n_elem == 0 && qc->pad_len == 0);
-
idx = 0;
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
u32 addr, offset;
u32 sg_len, len;
@@ -578,29 +568,27 @@ static void pdc_fill_sg(struct ata_queued_cmd *qc)
}
}
- if (idx) {
- u32 len = le32_to_cpu(ap->prd[idx - 1].flags_len);
+ len = le32_to_cpu(ap->prd[idx - 1].flags_len);
- if (len > SG_COUNT_ASIC_BUG) {
- u32 addr;
+ if (len > SG_COUNT_ASIC_BUG) {
+ u32 addr;
- VPRINTK("Splitting last PRD.\n");
+ VPRINTK("Splitting last PRD.\n");
- addr = le32_to_cpu(ap->prd[idx - 1].addr);
- ap->prd[idx - 1].flags_len = cpu_to_le32(len - SG_COUNT_ASIC_BUG);
- VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx - 1, addr, SG_COUNT_ASIC_BUG);
+ addr = le32_to_cpu(ap->prd[idx - 1].addr);
+ ap->prd[idx - 1].flags_len = cpu_to_le32(len - SG_COUNT_ASIC_BUG);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx - 1, addr, SG_COUNT_ASIC_BUG);
- addr = addr + len - SG_COUNT_ASIC_BUG;
- len = SG_COUNT_ASIC_BUG;
- ap->prd[idx].addr = cpu_to_le32(addr);
- ap->prd[idx].flags_len = cpu_to_le32(len);
- VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
+ addr = addr + len - SG_COUNT_ASIC_BUG;
+ len = SG_COUNT_ASIC_BUG;
+ ap->prd[idx].addr = cpu_to_le32(addr);
+ ap->prd[idx].flags_len = cpu_to_le32(len);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
- idx++;
- }
-
- ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+ idx++;
}
+
+ ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
}
static void pdc_qc_prep(struct ata_queued_cmd *qc)
@@ -627,14 +615,14 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc)
pdc_pkt_footer(&qc->tf, pp->pkt, i);
break;
- case ATA_PROT_ATAPI:
+ case ATAPI_PROT_PIO:
pdc_fill_sg(qc);
break;
- case ATA_PROT_ATAPI_DMA:
+ case ATAPI_PROT_DMA:
pdc_fill_sg(qc);
/*FALLTHROUGH*/
- case ATA_PROT_ATAPI_NODATA:
+ case ATAPI_PROT_NODATA:
pdc_atapi_pkt(qc);
break;
@@ -754,8 +742,8 @@ static inline unsigned int pdc_host_intr(struct ata_port *ap,
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
- case ATA_PROT_ATAPI_DMA:
- case ATA_PROT_ATAPI_NODATA:
+ case ATAPI_PROT_DMA:
+ case ATAPI_PROT_NODATA:
qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
ata_qc_complete(qc);
handled = 1;
@@ -900,7 +888,7 @@ static inline void pdc_packet_start(struct ata_queued_cmd *qc)
static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
{
switch (qc->tf.protocol) {
- case ATA_PROT_ATAPI_NODATA:
+ case ATAPI_PROT_NODATA:
if (qc->dev->flags & ATA_DFLAG_CDB_INTR)
break;
/*FALLTHROUGH*/
@@ -908,7 +896,7 @@ static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
if (qc->tf.flags & ATA_TFLAG_POLLING)
break;
/*FALLTHROUGH*/
- case ATA_PROT_ATAPI_DMA:
+ case ATAPI_PROT_DMA:
case ATA_PROT_DMA:
pdc_packet_start(qc);
return 0;
@@ -922,16 +910,14 @@ static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
- WARN_ON(tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_ATAPI_DMA);
+ WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA);
ata_tf_load(ap, tf);
}
static void pdc_exec_command_mmio(struct ata_port *ap,
const struct ata_taskfile *tf)
{
- WARN_ON(tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_ATAPI_DMA);
+ WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA);
ata_exec_command(ap, tf);
}
diff --git a/drivers/ata/sata_promise.h b/drivers/ata/sata_promise.h
index 6ee5e19..00d6000 100644
--- a/drivers/ata/sata_promise.h
+++ b/drivers/ata/sata_promise.h
@@ -46,7 +46,7 @@ static inline unsigned int pdc_pkt_header(struct ata_taskfile *tf,
unsigned int devno, u8 *buf)
{
u8 dev_reg;
- u32 *buf32 = (u32 *) buf;
+ __le32 *buf32 = (__le32 *) buf;
/* set control bits (byte 0), zero delay seq id (byte 3),
* and seq id (byte 2)
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index c68b241..91cc12c 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -287,14 +287,10 @@ static unsigned int qs_fill_sg(struct ata_queued_cmd *qc)
struct scatterlist *sg;
struct ata_port *ap = qc->ap;
struct qs_port_priv *pp = ap->private_data;
- unsigned int nelem;
u8 *prd = pp->pkt + QS_CPB_BYTES;
+ unsigned int si;
- WARN_ON(qc->__sg == NULL);
- WARN_ON(qc->n_elem == 0 && qc->pad_len == 0);
-
- nelem = 0;
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
u64 addr;
u32 len;
@@ -306,12 +302,11 @@ static unsigned int qs_fill_sg(struct ata_queued_cmd *qc)
*(__le32 *)prd = cpu_to_le32(len);
prd += sizeof(u64);
- VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", nelem,
+ VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", si,
(unsigned long long)addr, len);
- nelem++;
}
- return nelem;
+ return si;
}
static void qs_qc_prep(struct ata_queued_cmd *qc)
@@ -376,7 +371,7 @@ static unsigned int qs_qc_issue(struct ata_queued_cmd *qc)
qs_packet_start(qc);
return 0;
- case ATA_PROT_ATAPI_DMA:
+ case ATAPI_PROT_DMA:
BUG();
break;
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index f5119bf..0b8191b 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -416,15 +416,14 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
*/
/* Check the ATA_DFLAG_CDB_INTR flag is enough here.
- * The flag was turned on only for atapi devices.
- * No need to check is_atapi_taskfile(&qc->tf) again.
+ * The flag was turned on only for atapi devices. No
+ * need to check ata_is_atapi(qc->tf.protocol) again.
*/
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
goto err_hsm;
break;
case HSM_ST_LAST:
- if (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATA_PROT_ATAPI_DMA) {
+ if (ata_is_dma(qc->tf.protocol)) {
/* clear DMA-Start bit */
ap->ops->bmdma_stop(qc);
@@ -451,8 +450,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
/* kick HSM in the ass */
ata_hsm_move(ap, qc, status, 0);
- if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATA_PROT_ATAPI_DMA))
+ if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol))
ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2);
return;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 864c1c1..b4b1f91 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -813,8 +813,9 @@ static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
{
struct scatterlist *sg;
struct sil24_sge *last_sge = NULL;
+ unsigned int si;
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
sge->addr = cpu_to_le64(sg_dma_address(sg));
sge->cnt = cpu_to_le32(sg_dma_len(sg));
sge->flags = 0;
@@ -823,8 +824,7 @@ static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
sge++;
}
- if (likely(last_sge))
- last_sge->flags = cpu_to_le32(SGE_TRM);
+ last_sge->flags = cpu_to_le32(SGE_TRM);
}
static int sil24_qc_defer(struct ata_queued_cmd *qc)
@@ -852,9 +852,7 @@ static int sil24_qc_defer(struct ata_queued_cmd *qc)
* set.
*
*/
- int is_excl = (prot == ATA_PROT_ATAPI ||
- prot == ATA_PROT_ATAPI_NODATA ||
- prot == ATA_PROT_ATAPI_DMA ||
+ int is_excl = (ata_is_atapi(prot) ||
(qc->flags & ATA_QCFLAG_RESULT_TF));
if (unlikely(ap->excl_link)) {
@@ -885,35 +883,21 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
cb = &pp->cmd_block[sil24_tag(qc->tag)];
- switch (qc->tf.protocol) {
- case ATA_PROT_PIO:
- case ATA_PROT_DMA:
- case ATA_PROT_NCQ:
- case ATA_PROT_NODATA:
+ if (!ata_is_atapi(qc->tf.protocol)) {
prb = &cb->ata.prb;
sge = cb->ata.sge;
- break;
-
- case ATA_PROT_ATAPI:
- case ATA_PROT_ATAPI_DMA:
- case ATA_PROT_ATAPI_NODATA:
+ } else {
prb = &cb->atapi.prb;
sge = cb->atapi.sge;
memset(cb->atapi.cdb, 0, 32);
memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
- if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
+ if (ata_is_data(qc->tf.protocol)) {
if (qc->tf.flags & ATA_TFLAG_WRITE)
ctrl = PRB_CTRL_PACKET_WRITE;
else
ctrl = PRB_CTRL_PACKET_READ;
}
- break;
-
- default:
- prb = NULL; /* shut up, gcc */
- sge = NULL;
- BUG();
}
prb->ctrl = cpu_to_le16(ctrl);
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 4d85718..e3d56bc 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -334,7 +334,7 @@ static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf,
{
u32 addr;
unsigned int dw = PDC_DIMM_APKT_PRD >> 2;
- u32 *buf32 = (u32 *) buf;
+ __le32 *buf32 = (__le32 *) buf;
/* output ATA packet S/G table */
addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA +
@@ -356,7 +356,7 @@ static inline void pdc20621_host_sg(struct ata_taskfile *tf, u8 *buf,
{
u32 addr;
unsigned int dw = PDC_DIMM_HPKT_PRD >> 2;
- u32 *buf32 = (u32 *) buf;
+ __le32 *buf32 = (__le32 *) buf;
/* output Host DMA packet S/G table */
addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA +
@@ -377,7 +377,7 @@ static inline unsigned int pdc20621_ata_pkt(struct ata_taskfile *tf,
unsigned int portno)
{
unsigned int i, dw;
- u32 *buf32 = (u32 *) buf;
+ __le32 *buf32 = (__le32 *) buf;
u8 dev_reg;
unsigned int dimm_sg = PDC_20621_DIMM_BASE +
@@ -429,7 +429,8 @@ static inline void pdc20621_host_pkt(struct ata_taskfile *tf, u8 *buf,
unsigned int portno)
{
unsigned int dw;
- u32 tmp, *buf32 = (u32 *) buf;
+ u32 tmp;
+ __le32 *buf32 = (__le32 *) buf;
unsigned int host_sg = PDC_20621_DIMM_BASE +
(PDC_DIMM_WINDOW_STEP * portno) +
@@ -473,7 +474,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc)
void __iomem *mmio = ap->host->iomap[PDC_MMIO_BAR];
void __iomem *dimm_mmio = ap->host->iomap[PDC_DIMM_BAR];
unsigned int portno = ap->port_no;
- unsigned int i, idx, total_len = 0, sgt_len;
+ unsigned int i, si, idx, total_len = 0, sgt_len;
u32 *buf = (u32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ];
WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP));
@@ -487,7 +488,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc)
* Build S/G table
*/
idx = 0;
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
buf[idx++] = cpu_to_le32(sg_dma_address(sg));
buf[idx++] = cpu_to_le32(sg_dma_len(sg));
total_len += sg_dma_len(sg);
@@ -700,7 +701,7 @@ static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc)
pdc20621_packet_start(qc);
return 0;
- case ATA_PROT_ATAPI_DMA:
+ case ATAPI_PROT_DMA:
BUG();
break;
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 0841df0..aa0df0a 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -5142,6 +5142,7 @@ static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd,
struct ipr_ioadl_desc *last_ioadl = NULL;
int len = qc->nbytes + qc->pad_len;
struct scatterlist *sg;
+ unsigned int si;
if (len == 0)
return;
@@ -5159,7 +5160,7 @@ static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd,
cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg);
}
- ata_for_each_sg(sg, qc) {
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
ioadl->flags_and_data_len = cpu_to_be32(ioadl_flags | sg_dma_len(sg));
ioadl->address = cpu_to_be32(sg_dma_address(sg));
@@ -5222,12 +5223,12 @@ static unsigned int ipr_qc_issue(struct ata_queued_cmd *qc)
regs->flags |= IPR_ATA_FLAG_XFER_TYPE_DMA;
break;
- case ATA_PROT_ATAPI:
- case ATA_PROT_ATAPI_NODATA:
+ case ATAPI_PROT_PIO:
+ case ATAPI_PROT_NODATA:
regs->flags |= IPR_ATA_FLAG_PACKET_CMD;
break;
- case ATA_PROT_ATAPI_DMA:
+ case ATAPI_PROT_DMA:
regs->flags |= IPR_ATA_FLAG_PACKET_CMD;
regs->flags |= IPR_ATA_FLAG_XFER_TYPE_DMA;
break;
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 0829b55..827cfb1 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -158,8 +158,8 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
struct Scsi_Host *host = sas_ha->core.shost;
struct sas_internal *i = to_sas_internal(host->transportt);
struct scatterlist *sg;
- unsigned int num = 0;
unsigned int xfer = 0;
+ unsigned int si;
task = sas_alloc_task(GFP_ATOMIC);
if (!task)
@@ -176,22 +176,20 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
ata_tf_to_fis(&qc->tf, 1, 0, (u8*)&task->ata_task.fis);
task->uldd_task = qc;
- if (is_atapi_taskfile(&qc->tf)) {
+ if (ata_is_atapi(qc->tf.protocol)) {
memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);
task->total_xfer_len = qc->nbytes + qc->pad_len;
task->num_scatter = qc->pad_len ? qc->n_elem + 1 : qc->n_elem;
} else {
- ata_for_each_sg(sg, qc) {
- num++;
+ for_each_sg(qc->sg, sg, qc->n_elem, si)
xfer += sg->length;
- }
task->total_xfer_len = xfer;
- task->num_scatter = num;
+ task->num_scatter = si;
}
task->data_dir = qc->dma_dir;
- task->scatter = qc->__sg;
+ task->scatter = qc->sg;
task->ata_task.retry_count = 1;
task->task_state_flags = SAS_TASK_STATE_PENDING;
qc->lldd_task = task;
@@ -200,7 +198,7 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
case ATA_PROT_NCQ:
task->ata_task.use_ncq = 1;
/* fall through */
- case ATA_PROT_ATAPI_DMA:
+ case ATAPI_PROT_DMA:
case ATA_PROT_DMA:
task->ata_task.dma_xfer = 1;
break;
diff --git a/include/linux/ata.h b/include/linux/ata.h
index e672e80..78bbaca 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -286,9 +286,10 @@ enum {
ATA_CBL_NONE = 0,
ATA_CBL_PATA40 = 1,
ATA_CBL_PATA80 = 2,
- ATA_CBL_PATA40_SHORT = 3, /* 40 wire cable to high UDMA spec */
- ATA_CBL_PATA_UNK = 4,
- ATA_CBL_SATA = 5,
+ ATA_CBL_PATA40_SHORT = 3, /* 40 wire cable to high UDMA spec */
+ ATA_CBL_PATA_UNK = 4, /* don't know, maybe 80c? */
+ ATA_CBL_PATA_IGN = 5, /* don't know, ignore cable handling */
+ ATA_CBL_SATA = 6,
/* SATA Status and Control Registers */
SCR_STATUS = 0,
@@ -324,6 +325,13 @@ enum {
ATA_TFLAG_LBA = (1 << 4), /* enable LBA */
ATA_TFLAG_FUA = (1 << 5), /* enable FUA */
ATA_TFLAG_POLLING = (1 << 6), /* set nIEN to 1 and use polling */
+
+ /* protocol flags */
+ ATA_PROT_FLAG_PIO = (1 << 0), /* is PIO */
+ ATA_PROT_FLAG_DMA = (1 << 1), /* is DMA */
+ ATA_PROT_FLAG_DATA = ATA_PROT_FLAG_PIO | ATA_PROT_FLAG_DMA,
+ ATA_PROT_FLAG_NCQ = (1 << 2), /* is NCQ */
+ ATA_PROT_FLAG_ATAPI = (1 << 3), /* is ATAPI */
};
enum ata_tf_protocols {
@@ -333,9 +341,9 @@ enum ata_tf_protocols {
ATA_PROT_PIO, /* PIO data xfer */
ATA_PROT_DMA, /* DMA */
ATA_PROT_NCQ, /* NCQ */
- ATA_PROT_ATAPI, /* packet command, PIO data xfer*/
- ATA_PROT_ATAPI_NODATA, /* packet command, no data */
- ATA_PROT_ATAPI_DMA, /* packet command with special DMA sauce */
+ ATAPI_PROT_NODATA, /* packet command, no data */
+ ATAPI_PROT_PIO, /* packet command, PIO data xfer*/
+ ATAPI_PROT_DMA, /* packet command with special DMA sauce */
};
enum ata_ioctls {
@@ -346,8 +354,8 @@ enum ata_ioctls {
/* core structures */
struct ata_prd {
- u32 addr;
- u32 flags_len;
+ __le32 addr;
+ __le32 flags_len;
};
struct ata_taskfile {
@@ -373,13 +381,69 @@ struct ata_taskfile {
u8 command; /* IO operation */
};
+/*
+ * protocol tests
+ */
+static inline unsigned int ata_prot_flags(u8 prot)
+{
+ switch (prot) {
+ case ATA_PROT_NODATA:
+ return 0;
+ case ATA_PROT_PIO:
+ return ATA_PROT_FLAG_PIO;
+ case ATA_PROT_DMA:
+ return ATA_PROT_FLAG_DMA;
+ case ATA_PROT_NCQ:
+ return ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ;
+ case ATAPI_PROT_NODATA:
+ return ATA_PROT_FLAG_ATAPI;
+ case ATAPI_PROT_PIO:
+ return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO;
+ case ATAPI_PROT_DMA:
+ return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA;
+ }
+ return 0;
+}
+
+static inline int ata_is_atapi(u8 prot)
+{
+ return ata_prot_flags(prot) & ATA_PROT_FLAG_ATAPI;
+}
+
+static inline int ata_is_nodata(u8 prot)
+{
+ return !(ata_prot_flags(prot) & ATA_PROT_FLAG_DATA);
+}
+
+static inline int ata_is_pio(u8 prot)
+{
+ return ata_prot_flags(prot) & ATA_PROT_FLAG_PIO;
+}
+
+static inline int ata_is_dma(u8 prot)
+{
+ return ata_prot_flags(prot) & ATA_PROT_FLAG_DMA;
+}
+
+static inline int ata_is_ncq(u8 prot)
+{
+ return ata_prot_flags(prot) & ATA_PROT_FLAG_NCQ;
+}
+
+static inline int ata_is_data(u8 prot)
+{
+ return ata_prot_flags(prot) & ATA_PROT_FLAG_DATA;
+}
+
+/*
+ * id tests
+ */
#define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0)
#define ata_id_has_lba(id) ((id)[49] & (1 << 9))
#define ata_id_has_dma(id) ((id)[49] & (1 << 8))
#define ata_id_has_ncq(id) ((id)[76] & (1 << 8))
#define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1)
#define ata_id_removeable(id) ((id)[0] & (1 << 7))
-#define ata_id_has_dword_io(id) ((id)[48] & (1 << 0))
#define ata_id_has_atapi_AN(id) \
( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
((id)[78] & (1 << 5)) )
@@ -415,6 +479,7 @@ static inline bool ata_id_has_dipm(const u16 *id)
return val & (1 << 3);
}
+
static inline int ata_id_has_fua(const u16 *id)
{
if ((id[84] & 0xC000) != 0x4000)
@@ -519,6 +584,26 @@ static inline int ata_id_is_sata(const u16 *id)
return ata_id_major_version(id) >= 5 && id[93] == 0;
}
+static inline int ata_id_has_tpm(const u16 *id)
+{
+ /* The TPM bits are only valid on ATA8 */
+ if (ata_id_major_version(id) < 8)
+ return 0;
+ if ((id[48] & 0xC000) != 0x4000)
+ return 0;
+ return id[48] & (1 << 0);
+}
+
+static inline int ata_id_has_dword_io(const u16 *id)
+{
+ /* ATA 8 reuses this flag for "trusted" computing */
+ if (ata_id_major_version(id) > 7)
+ return 0;
+ if (id[48] & (1 << 0))
+ return 1;
+ return 0;
+}
+
static inline int ata_id_current_chs_valid(const u16 *id)
{
/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
@@ -574,13 +659,6 @@ static inline int atapi_command_packet_set(const u16 *dev_id)
return (dev_id[0] >> 8) & 0x1f;
}
-static inline int is_atapi_taskfile(const struct ata_taskfile *tf)
-{
- return (tf->protocol == ATA_PROT_ATAPI) ||
- (tf->protocol == ATA_PROT_ATAPI_NODATA) ||
- (tf->protocol == ATA_PROT_ATAPI_DMA);
-}
-
static inline int is_multi_taskfile(struct ata_taskfile *tf)
{
return (tf->command == ATA_CMD_READ_MULTI) ||
diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h
index c6d3e22..fcdc11b 100644
--- a/include/linux/cdrom.h
+++ b/include/linux/cdrom.h
@@ -451,6 +451,7 @@ struct cdrom_generic_command
#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
#define GPCMD_READ_10 0x28
#define GPCMD_READ_12 0xa8
+#define GPCMD_READ_BUFFER 0x3c
#define GPCMD_READ_BUFFER_CAPACITY 0x5c
#define GPCMD_READ_CDVD_CAPACITY 0x25
#define GPCMD_READ_CD 0xbe
@@ -480,7 +481,9 @@ struct cdrom_generic_command
#define GPCMD_TEST_UNIT_READY 0x00
#define GPCMD_VERIFY_10 0x2f
#define GPCMD_WRITE_10 0x2a
+#define GPCMD_WRITE_12 0xaa
#define GPCMD_WRITE_AND_VERIFY_10 0x2e
+#define GPCMD_WRITE_BUFFER 0x3b
/* This is listed as optional in ATAPI 2.6, but is (curiously)
* missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
* Table 377 as an MMC command for SCSi devices though... Most ATAPI
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 124033c..4374c42 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -35,6 +35,7 @@
#include <linux/workqueue.h>
#include <scsi/scsi_host.h>
#include <linux/acpi.h>
+#include <linux/cdrom.h>
/*
* Define if arch has non-standard setup. This is a _PCI_ standard
@@ -143,10 +144,11 @@ enum {
ATA_DFLAG_NCQ_OFF = (1 << 13), /* device limited to non-NCQ mode */
ATA_DFLAG_SPUNDOWN = (1 << 14), /* XXX: for spindown_compat */
ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */
- ATA_DFLAG_INIT_MASK = (1 << 16) - 1,
+ ATA_DFLAG_DUBIOUS_XFER = (1 << 16), /* data transfer not verified */
+ ATA_DFLAG_INIT_MASK = (1 << 24) - 1,
- ATA_DFLAG_DETACH = (1 << 16),
- ATA_DFLAG_DETACHED = (1 << 17),
+ ATA_DFLAG_DETACH = (1 << 24),
+ ATA_DFLAG_DETACHED = (1 << 25),
ATA_DEV_UNKNOWN = 0, /* unknown device */
ATA_DEV_ATA = 1, /* ATA device */
@@ -217,9 +219,7 @@ enum {
/* struct ata_queued_cmd flags */
ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */
- ATA_QCFLAG_SG = (1 << 1), /* have s/g table? */
- ATA_QCFLAG_SINGLE = (1 << 2), /* no s/g, just a single buffer */
- ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE,
+ ATA_QCFLAG_DMAMAP = (1 << 1), /* SG table is DMA mapped */
ATA_QCFLAG_IO = (1 << 3), /* standard IO command */
ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */
ATA_QCFLAG_CLEAR_EXCL = (1 << 5), /* clear excl_link on completion */
@@ -266,19 +266,15 @@ enum {
PORT_DISABLED = 2,
/* encoding various smaller bitmaps into a single
- * unsigned int bitmap
+ * unsigned long bitmap
*/
- ATA_BITS_PIO = 7,
- ATA_BITS_MWDMA = 5,
- ATA_BITS_UDMA = 8,
+ ATA_NR_PIO_MODES = 7,
+ ATA_NR_MWDMA_MODES = 5,
+ ATA_NR_UDMA_MODES = 8,
ATA_SHIFT_PIO = 0,
- ATA_SHIFT_MWDMA = ATA_SHIFT_PIO + ATA_BITS_PIO,
- ATA_SHIFT_UDMA = ATA_SHIFT_MWDMA + ATA_BITS_MWDMA,
-
- ATA_MASK_PIO = ((1 << ATA_BITS_PIO) - 1) << ATA_SHIFT_PIO,
- ATA_MASK_MWDMA = ((1 << ATA_BITS_MWDMA) - 1) << ATA_SHIFT_MWDMA,
- ATA_MASK_UDMA = ((1 << ATA_BITS_UDMA) - 1) << ATA_SHIFT_UDMA,
+ ATA_SHIFT_MWDMA = ATA_SHIFT_PIO + ATA_NR_PIO_MODES,
+ ATA_SHIFT_UDMA = ATA_SHIFT_MWDMA + ATA_NR_MWDMA_MODES,
/* size of buffer to pad xfers ending on unaligned boundaries */
ATA_DMA_PAD_SZ = 4,
@@ -349,6 +345,21 @@ enum {
ATA_DMA_MASK_ATA = (1 << 0), /* DMA on ATA Disk */
ATA_DMA_MASK_ATAPI = (1 << 1), /* DMA on ATAPI */
ATA_DMA_MASK_CFA = (1 << 2), /* DMA on CF Card */
+
+ /* ATAPI command types */
+ ATAPI_READ = 0, /* READs */
+ ATAPI_WRITE = 1, /* WRITEs */
+ ATAPI_READ_CD = 2, /* READ CD [MSF] */
+ ATAPI_MISC = 3, /* the rest */
+};
+
+enum ata_xfer_mask {
+ ATA_MASK_PIO = ((1LU << ATA_NR_PIO_MODES) - 1)
+ << ATA_SHIFT_PIO,
+ ATA_MASK_MWDMA = ((1LU << ATA_NR_MWDMA_MODES) - 1)
+ << ATA_SHIFT_MWDMA,
+ ATA_MASK_UDMA = ((1LU << ATA_NR_UDMA_MODES) - 1)
+ << ATA_SHIFT_UDMA,
};
enum hsm_task_states {
@@ -447,7 +458,7 @@ struct ata_queued_cmd {
unsigned int tag;
unsigned int n_elem;
unsigned int n_iter;
- unsigned int orig_n_elem;
+ unsigned int mapped_n_elem;
int dma_dir;
@@ -455,17 +466,18 @@ struct ata_queued_cmd {
unsigned int sect_size;
unsigned int nbytes;
+ unsigned int raw_nbytes;
unsigned int curbytes;
struct scatterlist *cursg;
unsigned int cursg_ofs;
+ struct scatterlist *last_sg;
+ struct scatterlist saved_last_sg;
struct scatterlist sgent;
- struct scatterlist pad_sgent;
- void *buf_virt;
+ struct scatterlist extra_sg[2];
- /* DO NOT iterate over __sg manually, use ata_for_each_sg() */
- struct scatterlist *__sg;
+ struct scatterlist *sg;
unsigned int err_mask;
struct ata_taskfile result_tf;
@@ -482,7 +494,7 @@ struct ata_port_stats {
};
struct ata_ering_entry {
- int is_io;
+ unsigned int eflags;
unsigned int err_mask;
u64 timestamp;
};
@@ -522,9 +534,9 @@ struct ata_device {
unsigned int cdb_len;
/* per-dev xfer mask */
- unsigned int pio_mask;
- unsigned int mwdma_mask;
- unsigned int udma_mask;
+ unsigned long pio_mask;
+ unsigned long mwdma_mask;
+ unsigned long udma_mask;
/* for CHS addressing */
u16 cylinders; /* Number of cylinders */
@@ -560,6 +572,8 @@ struct ata_eh_context {
int tries[ATA_MAX_DEVICES];
unsigned int classes[ATA_MAX_DEVICES];
unsigned int did_probe_mask;
+ unsigned int saved_ncq_enabled;
+ u8 saved_xfer_mode[ATA_MAX_DEVICES];
};
struct ata_acpi_drive
@@ -686,7 +700,8 @@ struct ata_port_operations {
void (*bmdma_setup) (struct ata_queued_cmd *qc);
void (*bmdma_start) (struct ata_queued_cmd *qc);
- void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+ unsigned int (*data_xfer) (struct ata_device *dev, unsigned char *buf,
+ unsigned int buflen, int rw);
int (*qc_defer) (struct ata_queued_cmd *qc);
void (*qc_prep) (struct ata_queued_cmd *qc);
@@ -832,8 +847,6 @@ extern int ata_busy_sleep(struct ata_port *ap,
unsigned long timeout_pat, unsigned long timeout);
extern void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline);
extern int ata_wait_ready(struct ata_port *ap, unsigned long deadline);
-extern void ata_port_queue_task(struct ata_port *ap, work_func_t fn,
- void *data, unsigned long delay);
extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
unsigned long interval_msec,
unsigned long timeout_msec);
@@ -848,6 +861,16 @@ extern void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
extern void ata_tf_to_fis(const struct ata_taskfile *tf,
u8 pmp, int is_cmd, u8 *fis);
extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
+extern unsigned long ata_pack_xfermask(unsigned long pio_mask,
+ unsigned long mwdma_mask, unsigned long udma_mask);
+extern void ata_unpack_xfermask(unsigned long xfer_mask,
+ unsigned long *pio_mask, unsigned long *mwdma_mask,
+ unsigned long *udma_mask);
+extern u8 ata_xfer_mask2mode(unsigned long xfer_mask);
+extern unsigned long ata_xfer_mode2mask(u8 xfer_mode);
+extern int ata_xfer_mode2shift(unsigned long xfer_mode);
+extern const char *ata_mode_string(unsigned long xfer_mask);
+extern unsigned long ata_id_xfermask(const u16 *id);
extern void ata_noop_dev_select(struct ata_port *ap, unsigned int device);
extern void ata_std_dev_select(struct ata_port *ap, unsigned int device);
extern u8 ata_check_status(struct ata_port *ap);
@@ -856,17 +879,15 @@ extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
extern int ata_port_start(struct ata_port *ap);
extern int ata_sff_port_start(struct ata_port *ap);
extern irqreturn_t ata_interrupt(int irq, void *dev_instance);
-extern void ata_data_xfer(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data);
-extern void ata_data_xfer_noirq(struct ata_device *adev, unsigned char *buf,
- unsigned int buflen, int write_data);
+extern unsigned int ata_data_xfer(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw);
+extern unsigned int ata_data_xfer_noirq(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw);
extern int ata_std_qc_defer(struct ata_queued_cmd *qc);
extern void ata_dumb_qc_prep(struct ata_queued_cmd *qc);
extern void ata_qc_prep(struct ata_queued_cmd *qc);
extern void ata_noop_qc_prep(struct ata_queued_cmd *qc);
extern unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc);
-extern void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf,
- unsigned int buflen);
extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem);
extern unsigned int ata_dev_classify(const struct ata_taskfile *tf);
@@ -875,7 +896,6 @@ extern void ata_id_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
extern void ata_id_c_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
-extern void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown);
extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
extern void ata_bmdma_start(struct ata_queued_cmd *qc);
extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
@@ -910,6 +930,7 @@ extern u8 ata_irq_on(struct ata_port *ap);
extern int ata_cable_40wire(struct ata_port *ap);
extern int ata_cable_80wire(struct ata_port *ap);
extern int ata_cable_sata(struct ata_port *ap);
+extern int ata_cable_ignore(struct ata_port *ap);
extern int ata_cable_unknown(struct ata_port *ap);
/*
@@ -917,11 +938,13 @@ extern int ata_cable_unknown(struct ata_port *ap);
*/
extern unsigned int ata_pio_need_iordy(const struct ata_device *);
+extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode);
extern int ata_timing_compute(struct ata_device *, unsigned short,
struct ata_timing *, int, int);
extern void ata_timing_merge(const struct ata_timing *,
const struct ata_timing *, struct ata_timing *,
unsigned int);
+extern u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle);
enum {
ATA_TIMING_SETUP = (1 << 0),
@@ -948,15 +971,40 @@ static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
return &ap->__acpi_init_gtm;
return NULL;
}
-extern int ata_acpi_cbl_80wire(struct ata_port *ap);
int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm);
int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm);
+unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev,
+ const struct ata_acpi_gtm *gtm);
+int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm);
#else
static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
{
return NULL;
}
-static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; }
+
+static inline int ata_acpi_stm(const struct ata_port *ap,
+ struct ata_acpi_gtm *stm)
+{
+ return -ENOSYS;
+}
+
+static inline int ata_acpi_gtm(const struct ata_port *ap,
+ struct ata_acpi_gtm *stm)
+{
+ return -ENOSYS;
+}
+
+static inline unsigned int ata_acpi_gtm_xfermask(struct ata_device *dev,
+ const struct ata_acpi_gtm *gtm)
+{
+ return 0;
+}
+
+static inline int ata_acpi_cbl_80wire(struct ata_port *ap,
+ const struct ata_acpi_gtm *gtm)
+{
+ return 0;
+}
#endif
#ifdef CONFIG_PCI
@@ -985,8 +1033,12 @@ extern int ata_pci_init_bmdma(struct ata_host *host);
extern int ata_pci_prepare_sff_host(struct pci_dev *pdev,
const struct ata_port_info * const * ppi,
struct ata_host **r_host);
+extern int ata_pci_activate_sff_host(struct ata_host *host,
+ irq_handler_t irq_handler,
+ struct scsi_host_template *sht);
extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
-extern unsigned long ata_pci_default_filter(struct ata_device *, unsigned long);
+extern unsigned long ata_pci_default_filter(struct ata_device *dev,
+ unsigned long xfer_mask);
#endif /* CONFIG_PCI */
/*
@@ -1074,35 +1126,6 @@ extern void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
const char *name);
#endif
-/*
- * qc helpers
- */
-static inline struct scatterlist *
-ata_qc_first_sg(struct ata_queued_cmd *qc)
-{
- qc->n_iter = 0;
- if (qc->n_elem)
- return qc->__sg;
- if (qc->pad_len)
- return &qc->pad_sgent;
- return NULL;
-}
-
-static inline struct scatterlist *
-ata_qc_next_sg(struct scatterlist *sg, struct ata_queued_cmd *qc)
-{
- if (sg == &qc->pad_sgent)
- return NULL;
- if (++qc->n_iter < qc->n_elem)
- return sg_next(sg);
- if (qc->pad_len)
- return &qc->pad_sgent;
- return NULL;
-}
-
-#define ata_for_each_sg(sg, qc) \
- for (sg = ata_qc_first_sg(qc); sg; sg = ata_qc_next_sg(sg, qc))
-
static inline unsigned int ata_tag_valid(unsigned int tag)
{
return (tag < ATA_MAX_QUEUE) ? 1 : 0;
@@ -1337,15 +1360,17 @@ static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf)
static inline void ata_qc_reinit(struct ata_queued_cmd *qc)
{
qc->dma_dir = DMA_NONE;
- qc->__sg = NULL;
+ qc->sg = NULL;
qc->flags = 0;
qc->cursg = NULL;
qc->cursg_ofs = 0;
- qc->nbytes = qc->curbytes = 0;
+ qc->nbytes = qc->raw_nbytes = qc->curbytes = 0;
qc->n_elem = 0;
+ qc->mapped_n_elem = 0;
qc->n_iter = 0;
qc->err_mask = 0;
qc->pad_len = 0;
+ qc->last_sg = NULL;
qc->sect_size = ATA_SECT_SIZE;
ata_tf_init(qc->dev, &qc->tf);
@@ -1362,6 +1387,27 @@ static inline int ata_try_flush_cache(const struct ata_device *dev)
ata_id_has_flush_ext(dev->id);
}
+static inline int atapi_cmd_type(u8 opcode)
+{
+ switch (opcode) {
+ case GPCMD_READ_10:
+ case GPCMD_READ_12:
+ return ATAPI_READ;
+
+ case GPCMD_WRITE_10:
+ case GPCMD_WRITE_12:
+ case GPCMD_WRITE_AND_VERIFY_10:
+ return ATAPI_WRITE;
+
+ case GPCMD_READ_CD:
+ case GPCMD_READ_CD_MSF:
+ return ATAPI_READ_CD;
+
+ default:
+ return ATAPI_MISC;
+ }
+}
+
static inline unsigned int ac_err_mask(u8 status)
{
if (status & (ATA_BUSY | ATA_DRQ))
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 7f22151..1fbd025 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2066,6 +2066,9 @@
#define PCI_VENDOR_ID_NETCELL 0x169c
#define PCI_DEVICE_ID_REVOLUTION 0x0044
+#define PCI_VENDOR_ID_CENATEK 0x16CA
+#define PCI_DEVICE_ID_CENATEK_IDE 0x0001
+
#define PCI_VENDOR_ID_VITESSE 0x1725
#define PCI_DEVICE_ID_VITESSE_VSC7174 0x7174
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists