| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <386072610801280921q3e96bfc1v40ad09660c0f7ad8@mail.gmail.com>
Date: Tue, 29 Jan 2008 01:21:15 +0800
From: "Bryan Wu" <cooloney.lkml@...il.com>
To: "Jochen Friedrich" <jochen@...am.de>
Cc: "Scott Wood" <scottwood@...escale.com>,
"Jean Delvare" <khali@...ux-fr.org>,
"Kumar Gala" <galak@...nel.crashing.org>,
"Vitaly Bordug" <vitb@...nel.crashing.org>,
"Kernel, Linux" <linux-kernel@...r.kernel.org>,
"linuxppc-dev list" <linuxppc-dev@...abs.org>,
"Linux I2C" <i2c@...sensors.org>
Subject: Re: [PATCHv3 2.6.25] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers
On Jan 26, 2008 1:11 AM, Jochen Friedrich <jochen@...am.de> wrote:
> Using the port of 2.4 code from Vitaly Bordug <vitb@...nel.crashing.org>
> and the actual algorithm used by the i2c driver of the DBox code on
> cvs.tuxboc.org from Tmbinc, Gillem (htoa@....net). Renamed i2c-rpx.c and
> i2c-algo-8xx.c to i2c-cpm.c and converted the driver to an
> of_platform_driver.
>
> Signed-off-by: Jochen Friedrich <jochen@...am.de>
> ---
> arch/powerpc/boot/dts/mpc8272ads.dts | 10 +
> arch/powerpc/boot/dts/mpc866ads.dts | 10 +
> arch/powerpc/boot/dts/mpc885ads.dts | 10 +
> arch/powerpc/platforms/8xx/mpc885ads_setup.c | 5 +
> drivers/i2c/busses/Kconfig | 10 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-cpm.c | 759 ++++++++++++++++++++++++++
> 7 files changed, 805 insertions(+), 0 deletions(-)
> create mode 100644 drivers/i2c/busses/i2c-cpm.c
>
> diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
> index 7285ca1..7273996 100644
> --- a/arch/powerpc/boot/dts/mpc8272ads.dts
> +++ b/arch/powerpc/boot/dts/mpc8272ads.dts
> @@ -215,6 +215,16 @@
> linux,network-index = <1>;
> fsl,cpm-command = <16200300>;
> };
> +
> + i2c@...60 {
> + compatible = "fsl,mpc8248-i2c",
> + "fsl,cpm2-i2c",
> + "fsl,cpm-i2c";
> + reg = <11860 20 8afc 2>;
> + interrupts = <1 8>;
> + interrupt-parent = <&PIC>;
> + fsl,cpm-command = <29600000>;
> + };
> };
>
> PIC: interrupt-controller@...00 {
> diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
> index daf9433..80c08bf 100644
> --- a/arch/powerpc/boot/dts/mpc866ads.dts
> +++ b/arch/powerpc/boot/dts/mpc866ads.dts
> @@ -169,6 +169,16 @@
> fsl,cpm-command = <0000>;
> linux,network-index = <1>;
> };
> +
> + i2c@860 {
> + compatible = "fsl,mpc866-i2c",
> + "fsl,cpm1-i2c",
> + "fsl,cpm-i2c";
> + reg = <860 20 3c80 30>;
> + interrupts = <10 3>;
> + interrupt-parent = <&Cpm_pic>;
> + fsl,cpm-command = <0010>;
> + };
> };
> };
>
> diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
> index 8848e63..fd9c9d7 100644
> --- a/arch/powerpc/boot/dts/mpc885ads.dts
> +++ b/arch/powerpc/boot/dts/mpc885ads.dts
> @@ -213,6 +213,16 @@
> fsl,cpm-command = <0080>;
> linux,network-index = <2>;
> };
> +
> + i2c@860 {
> + compatible = "fsl,mpc885-i2c",
> + "fsl,cpm1-i2c",
> + "fsl,cpm-i2c";
> + reg = <860 20 3c80 30>;
> + interrupts = <10>;
> + interrupt-parent = <&CPM_PIC>;
> + fsl,cpm-command = <0010>;
> + };
> };
> };
>
> diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
> index f39447b..1e7d056 100644
> --- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
> +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
> @@ -157,6 +157,11 @@ static struct cpm_pin mpc885ads_pins[] = {
> {CPM_PORTE, 28, CPM_PIN_OUTPUT},
> {CPM_PORTE, 29, CPM_PIN_OUTPUT},
> #endif
> + /* I2C */
> +#ifdef CONFIG_I2C_8XX
> + {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
> + {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
> +#endif
> };
>
> static void __init init_ioports(void)
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index c466c6c..5950172 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -114,6 +114,16 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
> help
> The unit of the TWI clock is kHz.
>
> +config I2C_CPM
> + tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
> + depends on (CPM1 || CPM2) && I2C && PPC_OF
> + help
> + This supports the use of the I2C interface on Freescale
> + processors with CPM1 or CPM2.
> +
> + This driver can also be built as a module. If so, the module
> + will be called i2c-cpm.
> +
> config I2C_DAVINCI
> tristate "DaVinci I2C driver"
> depends on ARCH_DAVINCI
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 81d43c2..a395555 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o
> obj-$(CONFIG_I2C_AT91) += i2c-at91.o
> obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
> obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
> +obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
> obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
> obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
> obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
> diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
> new file mode 100644
> index 0000000..7191427
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-cpm.c
> @@ -0,0 +1,759 @@
> +/*
> + * Freescale CPM1/CPM2 I2C interface.
> + * Copyright (c) 1999 Dan Malek (dmalek@....net).
> + *
[!snip!]
> +
> + /* register new adapter to i2c module... */
> +
> + result = i2c_add_adapter(&cpm->adap);
As I was pointed before, please use the new style i2c driver interface:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=991dee591a99d035796a8c194eb1796cc020e142
-Bryan Wu
[!snip!]
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists