| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <200801281404.12937.gene.heskett@gmail.com>
Date: Mon, 28 Jan 2008 14:04:12 -0500
From: Gene Heskett <gene.heskett@...il.com>
To: Mark Lord <liml@....ca>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: Problem with ata layer in 2.6.24
On Monday 28 January 2008, Mark Lord wrote:
>Gene Heskett wrote:
>> Greeting;
>>
>> I had to reboot early this morning due to a freezeup, and I had a
>> bunch of these in the messages log:
>> ==============
>> Jan 27 19:42:11 coyote kernel: [42461.915961] ata1.00: exception Emask 0x0
>> SAct 0x0 SErr 0x0 action 0x2 frozen Jan 27 19:42:11 coyote kernel:
>> [42461.915973] ata1.00: cmd ca/00:08:b1:66:46/00:00:00:00:00/e8 tag 0 dma
>> 4096 out Jan 27 19:42:11 coyote kernel: [42461.915974] res
>> 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Jan 27 19:42:11
>> coyote kernel: [42461.915978] ata1.00: status: { DRDY } Jan 27 19:42:11
>> coyote kernel: [42461.916005] ata1: soft resetting link Jan 27 19:42:12
>> coyote kernel: [42462.078216] ata1.00: configured for UDMA/100 Jan 27
>> 19:42:12 coyote kernel: [42462.078232] ata1: EH complete
>> Jan 27 19:42:12 coyote kernel: [42462.090700] sd 0:0:0:0: [sda] 390721968
>> 512-byte hardware sectors (200050 MB) Jan 27 19:42:12 coyote kernel:
>> [42462.114230] sd 0:0:0:0: [sda] Write Protect is off Jan 27 19:42:12
>> coyote kernel: [42462.115079] sd 0:0:0:0: [sda] Write cache: enabled, read
>> cache: enabled, doesn't support DPO or FUA
>> ===============
>> That one showed up about 2 hours ago, so I expect I'll be locked
>> up again before I've managed a 24 hour uptime. This drive passed
>> a 'smartctl -t long /dev/sda' with flying colors after the reboot
>> this morning.
>>
>> Two instances were logged after I had rebooted to 2.6.24 from 2.6.24-rc8:
>>
>> Jan 24 20:46:33 coyote kernel: [ 0.000000] Linux version 2.6.24
>> (root@...ote.coyote.den) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33))
>> #1 SMP Thu Jan 24 20:17:55 EST 2008
>> ----
>> Jan 27 02:28:29 coyote kernel: [193207.445158] ata1.00: exception Emask
>> 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Jan 27 02:28:29 coyote kernel:
>> [193207.445170] ata1.00: cmd 35/00:08:f9:24:0a/00:00:17:00:00/e0 tag 0 dma
>> 4096 out Jan 27 02:28:29 coyote kernel: [193207.445172] res
>> 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Jan 27 02:28:29
>> coyote kernel: [193207.445175] ata1.00: status: { DRDY } Jan 27 02:28:29
>> coyote kernel: [193207.445202] ata1: soft resetting link Jan 27 02:28:29
>> coyote kernel: [193207.607384] ata1.00: configured for UDMA/100 Jan 27
>> 02:28:29 coyote kernel: [193207.607399] ata1: EH complete
>> Jan 27 02:28:29 coyote kernel: [193207.609681] sd 0:0:0:0: [sda] 390721968
>> 512-byte hardware sectors (200050 MB) Jan 27 02:28:29 coyote kernel:
>> [193207.619277] sd 0:0:0:0: [sda] Write Protect is off Jan 27 02:28:29
>> coyote kernel: [193207.649041] sd 0:0:0:0: [sda] Write cache: enabled,
>> read cache: enabled, doesn't support DPO or FUA
>> Jan 27 02:30:06 coyote kernel: [193304.336929] ata1.00: exception Emask
>> 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Jan 27 02:30:06 coyote kernel:
>> [193304.336940] ata1.00: cmd ca/00:20:69:22:a6/00:00:00:00:00/e7 tag 0 dma
>> 16384 out Jan 27 02:30:06 coyote kernel: [193304.336942] res
>> 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Jan 27 02:30:06
>> coyote kernel: [193304.336945] ata1.00: status: { DRDY } Jan 27 02:30:06
>> coyote kernel: [193304.336972] ata1: soft resetting link Jan 27 02:30:06
>> coyote kernel: [193304.499210] ata1.00: configured for UDMA/100 Jan 27
>> 02:30:06 coyote kernel: [193304.499226] ata1: EH complete
>> Jan 27 02:30:06 coyote kernel: [193304.499714] sd 0:0:0:0: [sda] 390721968
>> 512-byte hardware sectors (200050 MB) Jan 27 02:30:06 coyote kernel:
>> [193304.499857] sd 0:0:0:0: [sda] Write Protect is off Jan 27 02:30:06
>> coyote kernel: [193304.502315] sd 0:0:0:0: [sda] Write cache: enabled,
>> read cache: enabled, doesn't support DPO or FUA
>>
>> None were logged during the time I was running an -rc7 or -rc8.
>>
>> The previous hits on this resulted in the udma speed being downgraded
>> till it was actually running in pio just before the freeze that
>> required the hardware reset button.
>>
>> I'll reboot to -rc8 right now and resume. If its the drive, I should see
>> it. If not, then 2.6.24 is where I'll point the finger.
>
>..
>
>The only libata change I can see that could possibly affect your setup,
>is this one here, which went in sometime between -rc7 and -final:
>
>--- linux-2.6.24-rc7/drivers/ata/libata-eh.c 2008-01-06
> 16:45:38.000000000 -0500 +++ linux-2.6.24/drivers/ata/libata-eh.c
> 2008-01-24 17:58:37.000000000 -0500 @@ -1733,11 +1733,15 @@
> ehc->i.action &= ~ATA_EH_PERDEV_MASK;
> }
>
>- /* consider speeding down */
>+ /* propagate timeout to host link */
>+ if ((all_err_mask & AC_ERR_TIMEOUT) && !ata_is_host_link(link))
>+ ap->link.eh_context.i.err_mask |= AC_ERR_TIMEOUT;
>+
>
>It looks pretty innocent to me, though.
>If you want to try reverting just that change
>(comment out the two lines and rebuild),
>then that might provide useful information here.
>
>If -final is still b0rked even with those two lines changed back,
>then I suspect you're just "getting lucky" when switching between
>the -rc7/-rc8 kernel and the -final kernel.
>
>"Lucky" in a bad way, that is.
>
>The real test would be to rebuild the kernel without libata,
>and *with* the old IDE driver instead, and see if the problems persist.
I can do that, but going to this was pretty painfull, probably 5 or 6 reboots
to get it right.
And so far no one has tried to comment on those 2 dmesg lines I've quoted a
couple of times now, here's another:
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
what the heck is that trying to tell me to do, in some sort of broken english?
>If you need help with that, then perhaps someone familiar with Fedora
>might be able to assist.
>
>Cheers
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
I used to be disgusted, now I find I'm just amused.
-- Elvis Costello
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists