| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080128233334.GA14326@dis.manty.net> Date: Tue, 29 Jan 2008 00:33:34 +0100 From: Santiago Garcia Mantinan <manty@...ty.net> To: linux-kernel@...r.kernel.org Subject: Re: dl2k stopped working on 2.6.24 > I've been playing with ethtools and got it to work at 100FD by setting it > manually, but if afterwards I set it to auto it again goes 1000 HD and thus > not working again. I have changed my gigabit switch for a 100Mb wrt and the dl2k sets the link right at 100FD and works much better than when using it at the forced 100FD on the gigabit switch, in this last configuration the card was strugling a lot, with tranfers under the megabyte/s. I don't believe this is anything on my side as the e1000 cards and Nforce4 forcedeth I have all work ok at 1000FD with 2.4.24. Besides, the dl2k works ok on the same environment with 2.4.23. If there is a better list or anybody to contact about the dl2k so that I can send this info please let me know. As I said on my previous mail, if any other info is needed or testing any special stuff, don't hesitate to ask. Regards... -- Manty/BestiaTester -> http://manty.net -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists