[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1201683148-23931-6-git-send-email-bryan.wu@analog.com>
Date: Wed, 30 Jan 2008 16:52:25 +0800
From: Bryan Wu <bryan.wu@...log.com>
To: jeff@...zik.org, netdev@...r.kernel.org
Cc: linux-kernel@...r.kernel.org,
Michael Hennerich <michael.hennerich@...log.com>,
Bryan Wu <bryan.wu@...log.com>
Subject: [PATCH 5/8] [Blackfin] EMAC driver: ADSP-BF52x arch/mach support
From: Michael Hennerich <michael.hennerich@...log.com>
Signed-off-by: Michael Hennerich <michael.hennerich@...log.com>
Signed-off-by: Bryan Wu <bryan.wu@...log.com>
---
drivers/net/Kconfig | 9 +++++----
drivers/net/bfin_mac.c | 6 +++---
2 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5a2d1dd..ca2552b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -814,8 +814,8 @@ config ULTRA32
will be called smc-ultra32.
config BFIN_MAC
- tristate "Blackfin 536/537 on-chip mac support"
- depends on NET_ETHERNET && (BF537 || BF536) && (!BF537_PORT_H)
+ tristate "Blackfin 527/536/537 on-chip mac support"
+ depends on NET_ETHERNET && (BF527 || BF537 || BF536) && (!BF537_PORT_H)
select CRC32
select MII
select PHYLIB
@@ -828,7 +828,7 @@ config BFIN_MAC
config BFIN_MAC_USE_L1
bool "Use L1 memory for rx/tx packets"
- depends on BFIN_MAC && BF537
+ depends on BFIN_MAC && (BF527 || BF537)
default y
help
To get maximum network performance, you should use L1 memory as rx/tx buffers.
@@ -855,7 +855,8 @@ config BFIN_RX_DESC_NUM
config BFIN_MAC_RMII
bool "RMII PHY Interface (EXPERIMENTAL)"
depends on BFIN_MAC && EXPERIMENTAL
- default n
+ default y if BFIN527_EZKIT
+ default n if BFIN537_STAMP
help
Use Reduced PHY MII Interface
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index ed935e1..e9bd059 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -42,7 +42,7 @@
#define DRV_NAME "bfin_mac"
#define DRV_VERSION "1.1"
#define DRV_AUTHOR "Bryan Wu, Luke Yang"
-#define DRV_DESC "Blackfin BF53[67] on-chip Ethernet MAC driver"
+#define DRV_DESC "Blackfin BF53[67] BF527 on-chip Ethernet MAC driver"
MODULE_AUTHOR(DRV_AUTHOR);
MODULE_LICENSE("GPL");
@@ -752,7 +752,7 @@ static void bf537mac_enable(void)
#if defined(CONFIG_BFIN_MAC_RMII)
opmode |= RMII; /* For Now only 100MBit are supported */
-#ifdef CONFIG_BF_REV_0_2
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) && CONFIG_BF_REV_0_2
opmode |= TE;
#endif
#endif
@@ -994,7 +994,7 @@ static int __init bf537mac_probe(struct net_device *dev)
/* register irq handler */
if (request_irq
(IRQ_MAC_RX, bf537mac_interrupt, IRQF_DISABLED | IRQF_SHARED,
- "BFIN537_MAC_RX", dev)) {
+ "EMAC_RX", dev)) {
printk(KERN_WARNING DRV_NAME
": Unable to attach BlackFin MAC RX interrupt\n");
return -EBUSY;
--
1.5.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists