linux-kernel - Re: intel ahci problem

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-id: <47A117C6.2080205@shaw.ca>
Date:	Wed, 30 Jan 2008 18:35:18 -0600
From:	Robert Hancock <hancockr@...w.ca>
To:	Evgen L <evgen@....ru>
Cc:	linux-kernel@...r.kernel.org
Subject: Re: intel ahci problem

Evgen L wrote:
> Hi all
> 
> I have a problem with my Intel SR1550 server (S5000PAL motheboard, 
> SATA/SAS controller, 5 SATA HDD Seagate ST9120822AS ).
> The four drivers are in two md raid1, which striping by lvm and one 
> drive used separately. I have problem like below with two different 
> drives (ata3 or ata4) and ata5. I look problem like this with RedHat  
> 2.6.18-53 kernel, 2.6.24-rc8, and today 2.6.24-git5. I reading about any 
> problems like this in lkml.org. There can be this message will help to 
> fix this issue.
> The complete dmesg in attachment.
> 
> md: bind<sdd1>
> RAID1 conf printout:
> --- wd:1 rd:2
> disk 0, wo:0, o:1, dev:sdc1
> disk 1, wo:1, o:1, dev:sdd1
> md: recovery of RAID array md2
> md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
> md: using maximum available idle IO bandwidth (but not more than 200000 
> KB/sec) for recovery.
> md: using 128k window, over a total of 117218176 blocks.
> ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata4.00: cmd e7/00:00:00:00:00/00:00:00:00:00/a0 tag 0
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
> ata4.00: status: { DRDY }
> ata4: hard resetting link
> ata4: port is slow to respond, please be patient (Status 0x80)
> ata4: softreset failed (device not ready)
> ata4: hard resetting link
> ata4: port is slow to respond, please be patient (Status 0x80)
> ata4: softreset failed (device not ready)
> ata4: hard resetting link
> ata4: port is slow to respond, please be patient (Status 0x80)
> ata4: softreset failed (device not ready)
> ata4: limiting SATA link speed to 1.5 Gbps
> ata4: hard resetting link
> ata4: softreset failed (device not ready)
> ata4: reset failed, giving up
> ata4.00: disabled

Are you sure this is not a hardware problem (bad disk, cable, etc?) Is 
it always ata4 that fails?
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/