linux-kernel - RE: Mostly revert "e1000/e1000e: Move PCI-Express device IDs over to e1000e"

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <36D9DB17C6DE9E40B059440DB8D95F52044F8B6A@orsmsx418.amr.corp.intel.com>
Date:	Wed, 30 Jan 2008 20:59:40 -0800
From:	"Brandeburg, Jesse" <jesse.brandeburg@...el.com>
To:	"Frans Pop" <elendil@...net.nl>, "Adrian Bunk" <bunk@...nel.org>
Cc:	<akpm@...ux-foundation.org>,
	"Kok, Auke-jan H" <auke-jan.h.kok@...el.com>,
	<davem@...emloft.net>, <jeff@...zik.org>,
	<linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>,
	<randy.dunlap@...cle.com>, <torvalds@...ux-foundation.org>
Subject: RE: Mostly revert "e1000/e1000e: Move PCI-Express device IDs over       to e1000e"

Frans Pop wrote:
> There is one thing I don't understand, but that may well be just me...
> 
> From Linus' original patch:
>> +++ b/drivers/net/e1000/e1000_main.c
>> +     INTEL_E1000_ETHERNET_DEVICE(0x108C),
> 
> So, apparently support for 8086:108c was removed from the e1000
> driver. 

When it was enabled to be supported by e1000e.
 
> From my lspci:
> $ lspci -nn | grep Ether
> 01:00.0 Ethernet controller [0200]: Intel Corporation 82573E Gigabit
> Ethernet Controller (Copper) [8086:108c] (rev 03) 
> 
> But when I look at where that card is sitting:
> $ readlink pci/devices/0000\:01\:00.0/driver
> ../../../../bus/pci/drivers/e1000
> 
> So, it's on the PCI bus, not on the PCI-Express bus (which I also
> have, but 
> which has no devices on it).

82573E/L are PCIe devices only, don't let the use of "PCI configuration
space" confuse you.  All PCIe devices support PCI configuration space.
This allows systems with PCIe to work right (or mostly right) with all
the PCI supporting software like Linux.
 
> Or does the e1000e driver also support cards on the PCI bus?

E1000e is targeted at the PCIe devices only.
 
> If that's the case then the original changelog entry "Move PCI-Express
> device IDs over to e1000e" is misleading as it's not only PCI-Express
> devices...

Unfortunate bit of confusion over terminology.
 
> Hmmm. Or does which driver is loaded decide on which bus the device
> ends up? 

Hope this helped,
  Jesse
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/