| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200802010734.m117Yt5a022614@goober>
Date: Fri, 1 Feb 2008 17:34:55 +1000
From: Greg Ungerer <gerg@...pgear.com>
To: torvalds@...ux-foundation.org
Cc: gerg@...inux.org, linux-kernel@...r.kernel.org
Subject: [M68KNOMMU]: platform setup for 5307 ColdFire parts
Switch to platform style configuration for 5307 ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.
Signed-off-by: Greg Ungerer <gerg@...inux.org>
---
diff -Naurp linux-2.6.24/arch/m68knommu/platform/5307/config.c linux-2.6.24-uc0/arch/m68knommu/platform/5307/config.c
--- linux-2.6.24/arch/m68knommu/platform/5307/config.c 2008-01-25 08:58:37.000000000 +1000
+++ linux-2.6.24-uc0/arch/m68knommu/platform/5307/config.c 2008-01-11 13:37:38.000000000 +1000
@@ -13,11 +13,11 @@
#include <linux/param.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <asm/dma.h>
+#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
+#include <asm/mcfuart.h>
#include <asm/mcfwdebug.h>
/***************************************************************************/
@@ -38,17 +38,51 @@ unsigned char ledbank = 0xff;
/***************************************************************************/
-/*
- * DMA channel base address table.
- */
-unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
- MCF_MBAR + MCFDMA_BASE0,
- MCF_MBAR + MCFDMA_BASE1,
- MCF_MBAR + MCFDMA_BASE2,
- MCF_MBAR + MCFDMA_BASE3,
+static struct mcf_platform_uart m5307_uart_platform[] = {
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE1,
+ .irq = 73,
+ },
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE2,
+ .irq = 74,
+ },
+ { },
+};
+
+static struct platform_device m5307_uart = {
+ .name = "mcfuart",
+ .id = 0,
+ .dev.platform_data = m5307_uart_platform,
};
-unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+static struct platform_device *m5307_devices[] __initdata = {
+ &m5307_uart,
+};
+
+/***************************************************************************/
+
+static void __init m5307_uart_init_line(int line, int irq)
+{
+ if (line == 0) {
+ writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
+ writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
+ mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
+ } else if (line == 1) {
+ writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
+ writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
+ mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
+ }
+}
+
+static void __init m5307_uarts_init(void)
+{
+ const int nrlines = ARRAY_SIZE(m5307_uart_platform);
+ int line;
+
+ for (line = 0; (line < nrlines); line++)
+ m5307_uart_init_line(line, m5307_uart_platform[line].irq);
+}
/***************************************************************************/
@@ -99,7 +133,7 @@ int mcf_timerirqpending(int timer)
/***************************************************************************/
-void config_BSP(char *commandp, int size)
+void __init config_BSP(char *commandp, int size)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
@@ -117,7 +151,7 @@ void config_BSP(char *commandp, int size
mach_reset = coldfire_reset;
-#ifdef MCF_BDM_DISABLE
+#ifdef CONFIG_BDM_DISABLE
/*
* Disable the BDM clocking. This also turns off most of the rest of
* the BDM device. This is good for EMC reasons. This option is not
@@ -128,3 +162,14 @@ void config_BSP(char *commandp, int size
}
/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+ m5307_uarts_init();
+ platform_add_devices(m5307_devices, ARRAY_SIZE(m5307_devices));
+ return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists