| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200802010734.m117YeZV022603@goober>
Date: Fri, 1 Feb 2008 17:34:40 +1000
From: Greg Ungerer <gerg@...pgear.com>
To: torvalds@...ux-foundation.org
Cc: gerg@...inux.org, linux-kernel@...r.kernel.org
Subject: [M68KNOMMU]: platform setup for 527x ColdFire parts
Switch to platform style configuration for 527x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.
Signed-off-by: Greg Ungerer <gerg@...inux.org>
---
diff -Naurp linux-2.6.24/arch/m68knommu/platform/527x/config.c linux-2.6.24-uc0/arch/m68knommu/platform/527x/config.c
--- linux-2.6.24/arch/m68knommu/platform/527x/config.c 2008-01-25 08:58:37.000000000 +1000
+++ linux-2.6.24-uc0/arch/m68knommu/platform/527x/config.c 2007-11-30 11:03:11.000000000 +1000
@@ -16,11 +16,11 @@
#include <linux/param.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <asm/dma.h>
+#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include <asm/mcfdma.h>
+#include <asm/mcfuart.h>
/***************************************************************************/
@@ -28,14 +28,72 @@ void coldfire_reset(void);
/***************************************************************************/
-/*
- * DMA channel base address table.
- */
-unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
- MCF_MBAR + MCFDMA_BASE0,
+static struct mcf_platform_uart m527x_uart_platform[] = {
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE1,
+ .irq = MCFINT_VECBASE + MCFINT_UART0,
+ },
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE2,
+ .irq = MCFINT_VECBASE + MCFINT_UART1,
+ },
+ {
+ .mapbase = MCF_MBAR + MCFUART_BASE3,
+ .irq = MCFINT_VECBASE + MCFINT_UART2,
+ },
+ { },
};
-unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+static struct platform_device m527x_uart = {
+ .name = "mcfuart",
+ .id = 0,
+ .dev.platform_data = m527x_uart_platform,
+};
+
+static struct platform_device *m527x_devices[] __initdata = {
+ &m527x_uart,
+};
+
+/***************************************************************************/
+
+#define INTC0 (MCF_MBAR + MCFICM_INTC0)
+
+static void __init m527x_uart_init_line(int line, int irq)
+{
+ u16 sepmask;
+ u32 imr;
+
+ if ((line < 0) || (line > 2))
+ return;
+
+ /* level 6, line based priority */
+ writeb(0x30+line, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
+
+ imr = readl(INTC0 + MCFINTC_IMRL);
+ imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
+ writel(imr, INTC0 + MCFINTC_IMRL);
+
+ /*
+ * External Pin Mask Setting & Enable External Pin for Interface
+ */
+ sepmask = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
+ if (line == 0)
+ sepmask |= UART0_ENABLE_MASK;
+ else if (line == 1)
+ sepmask |= UART1_ENABLE_MASK;
+ else if (line == 2)
+ sepmask |= UART2_ENABLE_MASK;
+ writew(sepmask, MCF_IPSBAR + MCF_GPIO_PAR_UART);
+}
+
+static void __init m527x_uarts_init(void)
+{
+ const int nrlines = ARRAY_SIZE(m527x_uart_platform);
+ int line;
+
+ for (line = 0; (line < nrlines); line++)
+ m527x_uart_init_line(line, m527x_uart_platform[line].irq);
+}
/***************************************************************************/
@@ -54,10 +112,21 @@ void mcf_autovector(unsigned int vec)
/***************************************************************************/
-void config_BSP(char *commandp, int size)
+void __init config_BSP(char *commandp, int size)
{
mcf_disableall();
mach_reset = coldfire_reset;
}
/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+ m527x_uarts_init();
+ platform_add_devices(m527x_devices, ARRAY_SIZE(m527x_devices));
+ return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists