[ 0.000000] Linux version 2.6.24-git-latest (root@strider) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #2 SMP PREEMPT Wed Jan 30 21:44:10 EST 2008 [ 0.000000] Command line: root=UUID=f7f3edd7-7022-4b63-a1f2-d4cace42ac1a ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f692400 (usable) [ 0.000000] BIOS-e820: 000000003f692400 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 259730) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FBBF0, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 3F693E00, 005C (r1 DELL M08 27D7080F ASL 61) [ 0.000000] ACPI: FACP 3F693C9C, 00F4 (r4 DELL M08 27D7080F ASL 61) [ 0.000000] ACPI: DSDT 3F694400, 567C (r2 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 3F6A2C00, 0040 [ 0.000000] ACPI: HPET 3F693F00, 0038 (r1 DELL M08 1 ASL 61) [ 0.000000] ACPI: APIC 3F694000, 0068 (r1 DELL M08 27D7080F ASL 47) [ 0.000000] ACPI: MCFG 3F693FC0, 003E (r16 DELL M08 27D7080F ASL 61) [ 0.000000] ACPI: SLIC 3F69409C, 0024 (r1 DELL M08 27D7080F ASL 61) [ 0.000000] ACPI: BOOT 3F693BC0, 0028 (r1 DELL M08 27D7080F ASL 61) [ 0.000000] ACPI: SSDT 3F692682, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003f692000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 259730) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000003f692000 [ 0.000000] No mptable found. [ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 259730 [ 0.000000] On node 0 totalpages: 259633 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1277 pages reserved [ 0.000000] DMA zone: 2666 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3494 pages used for memmap [ 0.000000] DMA32 zone: 252140 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b8000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 38276 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 254806 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=f7f3edd7-7022-4b63-a1f2-d4cace42ac1a ro [ 0.000000] Initializing CPU#0 [ 0.000000] Preemptible RCU implementation. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000002] time.c: Detected 1496.248 MHz processor. [ 0.001636] Console: colour VGA+ 80x25 [ 0.001640] console [tty0] enabled [ 0.003333] Checking aperture... [ 0.003333] Calgary: detecting Calgary via BIOS EBDA area [ 0.003333] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.003333] Memory: 971856k/1038920k available (2581k kernel code, 66676k reserved, 1331k data, 432k init) [ 0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 0.003333] hpet clockevent registered [ 0.083331] Calibrating delay using timer specific routine.. 2996.45 BogoMIPS (lpj=4992725) [ 0.083550] Security Framework initialized [ 0.083645] SELinux: Disabled at boot. [ 0.083735] Capability LSM initialized [ 0.083996] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.084778] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.085179] Mount-cache hash table entries: 256 [ 0.085434] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.085571] CPU: L2 cache: 2048K [ 0.085659] CPU 0/0 -> Node 0 [ 0.085745] CPU: Physical Processor ID: 0 [ 0.085833] CPU: Processor Core ID: 0 [ 0.085927] CPU0: Thermal monitoring enabled (TM2) [ 0.086017] using mwait in idle threads. [ 0.086669] ACPI: Core revision 20070126 [ 0.131372] Using local APIC timer interrupts. [ 0.133326] APIC timer calibration result 10390624 [ 0.133329] Detected 10.390 MHz APIC timer. [ 0.133635] Booting processor 1/2 APIC 0x1 [ 0.003333] Initializing CPU#1 [ 0.003333] Calibrating delay using timer specific routine.. 2993.19 BogoMIPS (lpj=4987519) [ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003333] CPU: L2 cache: 2048K [ 0.003333] CPU 1/1 -> Node 0 [ 0.003333] CPU: Physical Processor ID: 0 [ 0.003333] CPU: Processor Core ID: 1 [ 0.003333] CPU1: Thermal monitoring enabled (TM2) [ 0.003333] Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz stepping 0d [ 0.227161] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.230013] Brought up 2 CPUs [ 0.230197] CPU0 attaching sched-domain: [ 0.230200] domain 0: span 03 [ 0.230202] groups: 01 02 [ 0.230206] domain 1: span 03 [ 0.230209] groups: 03 [ 0.230212] CPU1 attaching sched-domain: [ 0.230214] domain 0: span 03 [ 0.230216] groups: 02 01 [ 0.230219] domain 1: span 03 [ 0.230221] groups: 03 [ 0.003340] khelper used greatest stack depth: 5832 bytes left [ 0.003340] net_namespace: 424 bytes [ 0.003340] Booting paravirtualized kernel on bare hardware [ 0.003340] NET: Registered protocol family 16 [ 0.003340] ACPI: bus type pci registered [ 0.070256] PCI: Using MMCONFIG at f8000000 - fbffffff [ 0.081494] ACPI: EC: Look up EC in DSDT [ 0.143145] ACPI: Interpreter enabled [ 0.143233] ACPI: (supports S0 S3 S5) [ 0.143459] ACPI: Using IOAPIC for interrupt routing [ 0.171947] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.172872] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.172966] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 0.174600] PCI: Transparent bridge - 0000:00:1e.0 [ 0.174726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.175458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.175692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.175880] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.176057] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.176233] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.193417] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.193900] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.194380] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 [ 0.194904] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) [ 0.195474] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.196349] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.197208] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.198068] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.199170] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.199308] pnp: PnP ACPI init [ 0.199400] ACPI: bus type pnp registered [ 0.256903] pnpacpi: exceeded the max number of mem resources: 12 [ 0.257286] pnp: PnP ACPI: found 12 devices [ 0.257373] ACPI: ACPI bus type pnp unregistered [ 0.257815] PCI: Using ACPI for IRQ routing [ 0.257901] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.280001] NET: Registered protocol family 8 [ 0.280087] NET: Registered protocol family 20 [ 0.280226] DMAR:No DMAR devices found [ 0.280321] PCI-GART: No AMD northbridge found. [ 0.280413] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11 [ 0.280684] hpet0: 3 64-bit timers, 14318180 Hz [ 0.281810] ACPI: RTC can wake from S4 [ 0.513305] Time: tsc clocksource has been installed. [ 0.513313] Switched to high resolution mode on CPU 0 [ 0.283326] Switched to high resolution mode on CPU 1 [ 0.320011] system 00:05: ioport range 0xc80-0xcff could not be reserved [ 0.320108] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.320204] system 00:09: ioport range 0x900-0x97f has been reserved [ 0.320294] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.320384] system 00:09: ioport range 0x1000-0x1005 has been reserved [ 0.320475] system 00:09: ioport range 0x1008-0x100f has been reserved [ 0.320569] system 00:0a: ioport range 0xf400-0xf4fe has been reserved [ 0.320660] system 00:0a: ioport range 0x1006-0x1007 has been reserved [ 0.320751] system 00:0a: ioport range 0x100a-0x1059 could not be reserved [ 0.320842] system 00:0a: ioport range 0x1060-0x107f has been reserved [ 0.320933] system 00:0a: ioport range 0x1080-0x10bf has been reserved [ 0.321023] system 00:0a: ioport range 0x10c0-0x10df has been reserved [ 0.321113] system 00:0a: ioport range 0x1010-0x102f has been reserved [ 0.321204] system 00:0a: ioport range 0x809-0x809 has been reserved [ 0.321298] system 00:0b: iomem range 0x0-0x9efff could not be reserved [ 0.321389] system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved [ 0.321480] system 00:0b: iomem range 0xc0000-0xcffff has been reserved [ 0.321571] system 00:0b: iomem range 0xe0000-0xfffff has been reserved [ 0.321661] system 00:0b: iomem range 0x100000-0x3f6923ff could not be reserved [ 0.321783] system 00:0b: iomem range 0x3f692400-0x3f6fffff could not be reserved [ 0.321906] system 00:0b: iomem range 0x3f700000-0x3f7fffff could not be reserved [ 0.322028] system 00:0b: iomem range 0x3f700000-0x3fefffff could not be reserved [ 0.322150] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.322272] system 00:0b: iomem range 0xffa00000-0xffafffff has been reserved [ 0.322366] system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 0.322488] system 00:0b: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 0.323354] PCI: Bridge: 0000:00:1c.0 [ 0.323439] IO window: disabled. [ 0.323526] MEM window: disabled. [ 0.323612] PREFETCH window: disabled. [ 0.323699] PCI: Bridge: 0000:00:1c.1 [ 0.323782] IO window: disabled. [ 0.323869] MEM window: fe800000-fe8fffff [ 0.323956] PREFETCH window: disabled. [ 0.324681] PCI: Bridge: 0000:00:1c.3 [ 0.324766] IO window: d000-dfff [ 0.324852] MEM window: fe600000-fe7fffff [ 0.324939] PREFETCH window: f0000000-f01fffff [ 0.325028] PCI: Bridge: 0000:00:1c.5 [ 0.325112] IO window: disabled. [ 0.325198] MEM window: fe500000-fe5fffff [ 0.325285] PREFETCH window: disabled. [ 0.325373] PCI: Bridge: 0000:00:1e.0 [ 0.325457] IO window: disabled. [ 0.325543] MEM window: fe400000-fe4fffff [ 0.325630] PREFETCH window: disabled. [ 0.325741] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.325912] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.325933] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.326103] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.326124] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 0.326294] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.326314] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.326483] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 0.326495] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.326509] NET: Registered protocol family 2 [ 0.433410] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.434063] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.435208] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.435871] TCP: Hash tables configured (established 131072 bind 65536) [ 0.435963] TCP reno registered [ 0.473560] checking if image is initramfs... it is [ 6.805499] Freeing initrd memory: 46933k freed [ 6.834459] Simple Boot Flag at 0x79 set to 0x1 [ 6.835614] IA-32 Microcode Update Driver: v1.14a [ 6.835976] CPA exercising pageattr [ 6.836198] PGD 8063 PUD 0 [ 6.836354] CPA ffff810040000000 no pte level 0 [ 6.849116] CPA mapping 4k 16896 large 991 gb 0 x 16896[ffff81003f600000-ffff8100fbfff000] miss 524288 [ 6.877883] PGD 8063 PUD 0 [ 6.878065] CPA ffff810040000000 no pte level 0 [ 6.899342] CPA mapping 4k 462336 large 121 gb 0 x 462336[ffff810000000000-ffff8100ffdff000] miss 524288 [ 6.899470] CPA reverting everything [ 6.929972] APIC error on CPU1: 00(80) [ 6.929976] APIC error on CPU1: 00(c0) [ 6.929979] APIC error on CPU1: c0(80) [ 6.929981] APIC error on CPU1: 80(80) [ 6.929984] APIC error on CPU1: 80(80) [ 6.929987] APIC error on CPU1: 80(80) [ 6.929990] APIC error on CPU1: 80(80) [ 6.929992] APIC error on CPU1: 80(80) [ 6.929995] APIC error on CPU1: 80(80) [ 6.929997] APIC error on CPU1: 80(80) [ 6.930000] APIC error on CPU1: 80(80) [ 6.930002] APIC error on CPU1: 80(80) [ 6.930005] APIC error on CPU1: 80(80) [ 6.930008] APIC error on CPU1: 80(80) [ 6.930010] APIC error on CPU1: 80(80) [ 6.930013] APIC error on CPU1: 80(80) [ 6.930015] APIC error on CPU1: 80(80) [ 6.930018] APIC error on CPU1: 80(80) [ 6.930021] APIC error on CPU1: 80(80) [ 6.932888] PGD 8063 PUD 0 [ 6.932888] CPA ffff810040000000 no pte level 0 [ 6.932888] CPA mapping 4k 462336 large 121 gb 0 x 462336[ffff810000000000-ffff8100ffdff000] miss 524288 [ 6.932888] CPA selftests PASSED [ 6.932888] audit: initializing netlink socket (disabled) [ 6.932888] audit(1202001256.436:1): initialized [ 6.932888] Kprobe smoke test started [ 6.932888] Kprobe smoke test passed successfully [ 6.932888] Total HugeTLB memory allocated, 0 [ 6.935188] VFS: Disk quotas dquot_6.5.1 [ 6.935389] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 6.935863] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 6.935987] io scheduler noop registered [ 6.936071] io scheduler anticipatory registered [ 6.936157] io scheduler deadline registered [ 6.936377] io scheduler cfq registered (default) [ 6.936473] Boot video device is 0000:00:02.0 [ 6.936748] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 6.936798] assign_interrupt_mode Found MSI capability [ 6.936925] Allocate Port Service[0000:00:1c.0:pcie00] [ 6.936986] Allocate Port Service[0000:00:1c.0:pcie02] [ 6.937042] Allocate Port Service[0000:00:1c.0:pcie03] [ 6.937153] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 6.937202] assign_interrupt_mode Found MSI capability [ 6.937325] Allocate Port Service[0000:00:1c.1:pcie00] [ 6.937379] Allocate Port Service[0000:00:1c.1:pcie02] [ 6.937432] Allocate Port Service[0000:00:1c.1:pcie03] [ 6.937544] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 6.937593] assign_interrupt_mode Found MSI capability [ 6.937715] Allocate Port Service[0000:00:1c.3:pcie00] [ 6.937770] Allocate Port Service[0000:00:1c.3:pcie02] [ 6.937827] Allocate Port Service[0000:00:1c.3:pcie03] [ 6.937940] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 6.937988] assign_interrupt_mode Found MSI capability [ 6.938113] Allocate Port Service[0000:00:1c.5:pcie00] [ 6.938169] Allocate Port Service[0000:00:1c.5:pcie02] [ 6.938223] Allocate Port Service[0000:00:1c.5:pcie03] [ 6.938628] ALI M7101 PMU not found. [ 6.973688] Real Time Clock Driver v1.12ac [ 6.973966] hpet_resources: 0xfed00000 is busy [ 6.974111] Linux agpgart interface v0.102 [ 6.974198] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 6.974323] Hangcheck: Using get_cycles(). [ 6.974409] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 6.976287] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 6.976501] input: Macintosh mouse button emulation as /class/input/input0 [ 6.976737] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 7.013292] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.043002] mice: PS/2 mouse device common for all mice [ 7.043148] EDAC MC: Ver: 2.1.0 Jan 30 2008 [ 7.043506] cpuidle: using governor ladder [ 7.043592] cpuidle: using governor menu [ 7.044185] TCP cubic registered [ 7.044277] NET: Registered protocol family 1 [ 7.044560] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 7.044658] Freeing unused kernel memory: 432k freed [ 7.045032] Write protecting the kernel read-only data: 1060k [ 7.045124] Testing CPA: undo ffffffff80491000-ffffffff8059a000 [ 7.045928] Testing CPA: again [ 7.097692] all_generic_ide used greatest stack depth: 5688 bytes left [ 7.255450] fuse init (API version 7.9) [ 7.269103] ACPI: SSDT 3F6931B8, 01C0 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 7.269797] ACPI: SSDT 3F692B4E, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 7.785862] Monitor-Mwait will be used to enter C-1 state [ 7.785866] Monitor-Mwait will be used to enter C-2 state [ 7.785869] Monitor-Mwait will be used to enter C-3 state [ 7.786080] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 7.786340] ACPI: Processor [CPU0] (supports 8 throttling states) [ 7.786939] ACPI: SSDT 3F693378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 7.787463] ACPI: SSDT 3F693133, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 7.788511] Marking TSC unstable due to TSC halts in idle [ 7.278055] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 7.278331] ACPI: Processor [CPU1] (supports 8 throttling states) [ 7.789342] Time: hpet clocksource has been installed. [ 7.286597] ACPI: Thermal Zone [THM] (41 C) [ 7.286924] modprobe used greatest stack depth: 5280 bytes left [ 8.620318] usbcore: registered new interface driver usbfs [ 8.620451] usbcore: registered new interface driver hub [ 8.621097] usbcore: registered new device driver usb [ 8.623311] USB Universal Host Controller Interface driver v3.0 [ 8.623455] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 8.623632] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 8.623636] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 8.623896] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 8.624053] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 8.624294] usb usb1: configuration #1 chosen from 1 choice [ 8.624410] hub 1-0:1.0: USB hub found [ 8.624500] hub 1-0:1.0: 2 ports detected [ 8.726242] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 8.726426] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 8.726430] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 8.726545] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 8.726702] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 8.726920] usb usb2: configuration #1 chosen from 1 choice [ 8.727039] hub 2-0:1.0: USB hub found [ 8.727128] hub 2-0:1.0: 2 ports detected [ 8.248023] pnp_modules used greatest stack depth: 5208 bytes left [ 8.265047] SCSI subsystem initialized [ 8.275328] libata version 3.00 loaded. [ 8.829542] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 8.829725] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 8.829730] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 8.829845] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 8.830000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 8.830221] usb usb3: configuration #1 chosen from 1 choice [ 8.830338] hub 3-0:1.0: USB hub found [ 8.830427] hub 3-0:1.0: 2 ports detected [ 9.837840] Clocksource tsc unstable (delta = -960235837 ns) [ 9.331706] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 9.331917] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 9.331922] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 9.332047] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 9.332202] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 9.332431] usb usb4: configuration #1 chosen from 1 choice [ 9.332550] hub 4-0:1.0: USB hub found [ 9.332642] hub 4-0:1.0: 2 ports detected [ 10.354668] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 10.354853] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 10.354857] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 10.354975] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 10.355132] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 10.355355] usb usb5: configuration #1 chosen from 1 choice [ 10.355474] hub 5-0:1.0: USB hub found [ 10.355566] hub 5-0:1.0: 2 ports detected [ 11.890211] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 11.893336] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 11.893340] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 11.893464] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 11.897915] ehci_hcd 0000:00:1a.7: debug port 1 [ 11.898017] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 11.898027] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 11.909914] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 11.910212] usb usb6: configuration #1 chosen from 1 choice [ 11.910341] hub 6-0:1.0: USB hub found [ 11.910434] hub 6-0:1.0: 4 ports detected [ 12.919513] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 [ 12.919730] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 12.919735] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 12.919862] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 12.924658] ehci_hcd 0000:00:1d.7: debug port 1 [ 12.924749] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 12.924757] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 13.951693] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 13.951941] usb usb7: configuration #1 chosen from 1 choice [ 13.952066] hub 7-0:1.0: USB hub found [ 13.952161] hub 7-0:1.0: 6 ports detected [ 14.469459] tg3.c:v3.87 (December 20, 2007) [ 14.469597] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 14.469797] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 59.238519] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1c:23:f7:5e:f5 [ 59.238661] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0] [ 59.238785] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 58.731940] ata_piix 0000:00:1f.1: version 2.12 [ 58.731955] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 58.732188] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 58.732925] scsi0 : ata_piix [ 58.733319] scsi1 : ata_piix [ 58.734269] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 58.734364] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 60.272411] ata2: port disabled. ignoring. [ 60.272511] ahci 0000:00:1f.2: version 3.0 [ 60.272535] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 60.272764] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x5) don't match, using nr_ports [ 60.272892] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7 [ 61.283660] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 61.283804] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 61.283937] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 61.284173] scsi2 : ahci [ 61.287191] scsi3 : ahci [ 60.788464] scsi4 : ahci [ 60.790778] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 507 [ 60.790904] ata4: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb980 irq 507 [ 60.791030] ata5: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 507 [ 64.897048] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 65.173024] ata3.00: ATA-8: WDC WD1200BEVS-75UST0, 01.01A01, max UDMA/133 [ 65.173141] ata3.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 31/32) [ 65.177231] ata3.00: configured for UDMA/133 [ 66.955226] ata4: SATA link down (SStatus 0 SControl 0) [ 68.731476] ata5: SATA link down (SStatus 0 SControl 300) [ 68.731730] scsi 2:0:0:0: Direct-Access ATA WDC WD1200BEVS-7 01.0 PQ: 0 ANSI: 5 [ 68.735677] modprobe used greatest stack depth: 5120 bytes left [ 68.736602] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 68.257941] Driver 'sd' needs updating - please use bus_type methods [ 68.258154] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 68.258268] sd 2:0:0:0: [sda] Write Protect is off [ 68.258357] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 68.258395] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 68.258615] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 68.258726] sd 2:0:0:0: [sda] Write Protect is off [ 68.258817] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 68.258854] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 68.258982] sda:<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fe4ff800-fe4fffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 68.303267] modprobe used greatest stack depth: 4960 bytes left [ 68.306402] sda1 sda2 sda3 sda4 < sda5 sda6 > [ 68.822126] sd 2:0:0:0: [sda] Attached SCSI disk [ 68.822368] modprobe used greatest stack depth: 4840 bytes left [ 68.828185] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 69.136007] kjournald starting. Commit interval 5 seconds [ 69.637247] EXT3-fs: mounted filesystem with ordered data mode. [ 69.802438] runlevel used greatest stack depth: 4488 bytes left [ 70.371917] grep used greatest stack depth: 3864 bytes left [ 70.351810] expr used greatest stack depth: 3712 bytes left [ 80.926150] agpgart: Detected an Intel 965GM Chipset. [ 80.927788] agpgart: Detected 7676K stolen memory. [ 80.941451] agpgart: AGP aperture is 256M @ 0xe0000000 [ 81.008562] ACPI: AC Adapter [AC] (on-line) [ 81.179445] input: Lid Switch as /class/input/input1 [ 81.213403] ACPI: Lid Switch [LID] [ 81.213738] input: Power Button (CM) as /class/input/input2 [ 81.268801] ACPI: Power Button (CM) [PBTN] [ 81.268988] input: Sleep Button (CM) as /class/input/input3 [ 81.335496] ACPI: Sleep Button (CM) [SBTN] [ 81.372453] ACPI: Battery Slot [BAT0] (battery present) [ 81.909822] input: Video Bus as /class/input/input4 [ 81.961829] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 81.972665] input: Video Bus as /class/input/input5 [ 82.031821] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 82.032122] input: Video Bus as /class/input/input6 [ 82.088559] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 81.769379] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 82.416875] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 82.591596] input: PC Speaker as /class/input/input7 [ 82.618593] iTCO_vendor_support: vendor-support=0 [ 82.746041] ricoh-mmc: Ricoh MMC Controller disabling driver [ 82.746139] ricoh-mmc: Copyright(c) Philip Langdale [ 82.746269] ricoh-mmc: Ricoh MMC controller found at 0000:03:01.2 [1180:0843] (rev 12) [ 82.746415] ricoh-mmc: Controller is now disabled. [ 82.840729] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 82.840947] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 82.841095] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 82.906634] sdhci: Secure Digital Host Controller Interface driver [ 82.906738] sdhci: Copyright(c) Pierre Ossman [ 82.906868] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22) [ 82.907023] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18 [ 82.907301] mmc0: SDHCI at 0xfe4ff400 irq 18 DMA [ 83.300046] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23kds [ 83.300051] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 83.300299] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 83.300532] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 83.300569] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 82.922648] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 83.530922] ACPI: PCI interrupt for device 0000:0c:00.0 disabled [ 83.545921] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 83.546261] PM: Writing back config space on device 0000:0c:00.0 at offset 1 (was 100102, writing 100106) [ 83.671023] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels [ 84.389947] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 84.390183] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 84.840196] NET: Registered protocol family 10 [ 84.840900] lo: Disabled Privacy Extensions [ 84.842200] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 85.585585] lp: driver loaded but no devices found [ 85.747939] Adding 1293192k swap on /dev/sda5. Priority:-1 extents:1 across:1293192k [ 86.059054] EXT3 FS on sda6, internal journal [ 86.353184] device-mapper: uevent: version 1.0.3 [ 86.353221] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 86.509624] aes_x86_64: Unknown symbol crypto_it_tab [ 86.509672] aes_x86_64: Unknown symbol crypto_aes_set_key [ 86.509745] aes_x86_64: Unknown symbol crypto_fl_tab [ 86.509790] aes_x86_64: Unknown symbol crypto_il_tab [ 86.509835] aes_x86_64: Unknown symbol crypto_ft_tab [ 86.178747] aes_x86_64: Unknown symbol crypto_it_tab [ 86.178795] aes_x86_64: Unknown symbol crypto_aes_set_key [ 86.178867] aes_x86_64: Unknown symbol crypto_fl_tab [ 86.178913] aes_x86_64: Unknown symbol crypto_il_tab [ 86.178958] aes_x86_64: Unknown symbol crypto_ft_tab [ 86.935269] kjournald starting. Commit interval 5 seconds [ 86.935531] EXT3 FS on sda3, internal journal [ 86.935536] EXT3-fs: mounted filesystem with ordered data mode.