| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 07 Feb 2008 23:36:15 -0600 From: Chris Holvenstot <cholvenstot@...cast.net> To: Thomas Gleixner <tglx@...utronix.de> Cc: Jiri Kosina <jkosina@...e.cz>, Kernel <linux-kernel@...r.kernel.org>, Ingo Molnar <mingo@...e.hu> Subject: Re: 2.6.24-git15 Keyboard Issue? Thomas - I believe that the following is the output you are looking for - sorry for the delay - between doctors and grandkids I was ready for a few pain pills and a long nap. I suspect you often feel the same way after dealing with some who post here. Thank you for your support Chris [ 0.000000] Linux version 2.6.24-git15-ch2 (root@...eye) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #3 SMP PREEMPT Thu Feb 7 22:00:10 CST 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 1151MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Scan SMP from c0000000 for 1024 bytes. [ 0.000000] Scan SMP from c009fc00 for 1024 bytes. [ 0.000000] Scan SMP from c00f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [c00f5380] 000f5380 [ 0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 524272 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 524272 [ 0.000000] On node 0 totalpages: 524272 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2303 pages used for memmap [ 0.000000] HighMem zone: 292593 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000F9260, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 7FFF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 7FFF3180, 63C4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 7FFF0000, 0040 [ 0.000000] ACPI: MCFG 7FFF9680, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 7FFF95C0, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520177 [ 0.000000] Kernel command line: root=UUID=4dc2e6b0-c980-418b-8ad0-98358e7ec47d ro quiet splash nohpet [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2412.392 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 2034196k/2097088k available (2071k kernel code, 61568k reserved, 952k data, 336k init, 1179584k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc03f9000 - 0xc044d000 ( 336 kB) [ 0.004000] .data : 0xc0305f42 - 0xc03f3f60 ( 952 kB) [ 0.004000] .text : 0xc0100000 - 0xc0305f42 (2071 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] HPET not available [ 0.084006] Calibrating delay using timer specific routine.. 4827.75 BogoMIPS (lpj=9655519) [ 0.084047] Security Framework initialized [ 0.084054] SELinux: Disabled at boot. [ 0.084069] Mount-cache hash table entries: 512 [ 0.084197] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084198] CPU: L2 Cache: 512K (64 bytes/line) [ 0.084200] CPU 0(2) -> Core 0 [ 0.084206] Compat vDSO mapped to ffffe000. [ 0.084213] Checking 'hlt' instruction... OK. [ 0.100223] ACPI: Core revision 20070126 [ 0.109784] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01 [ 0.109802] Booting processor 1/1 ip 4000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4825.07 BogoMIPS (lpj=9650150) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1(2) -> Core 1 [ 0.200189] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 01 [ 0.200199] Total of 2 processors activated (9652.83 BogoMIPS). [ 0.200336] ENABLING IO-APIC IRQs [ 0.200527] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.248015] Brought up 2 CPUs [ 0.248015] CPU0 attaching sched-domain: [ 0.248015] domain 0: span 3 [ 0.248015] groups: 1 2 [ 0.248015] CPU1 attaching sched-domain: [ 0.248015] domain 0: span 3 [ 0.248015] groups: 2 1 [ 0.248015] net_namespace: 552 bytes [ 0.248015] NET: Registered protocol family 16 [ 0.248015] EISA bus registered [ 0.248015] ACPI: bus type pci registered [ 0.248015] PCI: Using MMCONFIG [ 0.248015] PCI: No mmconfig possible on device 00:18 [ 0.248015] Setting up standard PCI resources [ 0.249890] ACPI: EC: Look up EC in DSDT [ 0.256197] ACPI: Interpreter enabled [ 0.256198] ACPI: (supports S0 S1 S5) [ 0.256208] ACPI: Using IOAPIC for interrupt routing [ 0.263378] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.263731] PCI: Transparent bridge - 0000:00:09.0 [ 0.264152] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.264373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.316986] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.317143] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.317300] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.317455] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.317610] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.317767] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.317923] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.318080] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.318236] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.318392] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.318548] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.318704] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.318859] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.319024] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.319187] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.319350] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.319523] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.319692] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.319861] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.320098] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.320207] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.320380] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.320553] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.320728] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.320900] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 0.321073] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0 [ 0.321245] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.321417] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.321590] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.321770] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.321951] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.322130] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 0.322246] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.322262] pnp: PnP ACPI init [ 0.322268] ACPI: bus type pnp registered [ 0.326748] pnpacpi: exceeded the max number of mem resources: 12 [ 0.326829] pnp: PnP ACPI: found 13 devices [ 0.326831] ACPI: ACPI bus type pnp unregistered [ 0.326834] PnPBIOS: Disabled by ACPI PNP [ 0.326930] PCI: Using ACPI for IRQ routing [ 0.326933] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.336022] NET: Registered protocol family 8 [ 0.336022] NET: Registered protocol family 20 [ 0.340026] system 00:01: ioport range 0x4000-0x407f has been reserved [ 0.340026] system 00:01: ioport range 0x4080-0x40ff has been reserved [ 0.340026] system 00:01: ioport range 0x4400-0x447f has been reserved [ 0.340026] system 00:01: ioport range 0x4480-0x44ff has been reserved [ 0.340026] system 00:01: ioport range 0x4800-0x487f has been reserved [ 0.340026] system 00:01: ioport range 0x4880-0x48ff has been reserved [ 0.340026] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.340026] system 00:02: ioport range 0x290-0x29e has been reserved [ 0.340026] system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.340026] system 00:0c: iomem range 0xf0000-0xf3fff could not be reserved [ 0.340026] system 00:0c: iomem range 0xf4000-0xf7fff could not be reserved [ 0.340026] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.340026] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.340026] system 00:0c: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 0.340026] system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved [ 0.340026] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.340026] system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved [ 0.340026] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.340026] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.340026] system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.340026] system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved [ 0.366552] PCI: Bridge: 0000:00:09.0 [ 0.366554] IO window: a000-afff [ 0.366557] MEM window: 0xfde00000-0xfdefffff [ 0.366559] PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff [ 0.366561] PCI: Bridge: 0000:00:0b.0 [ 0.366563] IO window: 9000-9fff [ 0.366565] MEM window: 0xfdd00000-0xfddfffff [ 0.366567] PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff [ 0.366569] PCI: Bridge: 0000:00:0c.0 [ 0.366571] IO window: 8000-8fff [ 0.366573] MEM window: 0xfdb00000-0xfdbfffff [ 0.366574] PREFETCH window: 0x00000000fda00000-0x00000000fdafffff [ 0.366577] PCI: Bridge: 0000:00:0d.0 [ 0.366579] IO window: 7000-7fff [ 0.366580] MEM window: 0xfd900000-0xfd9fffff [ 0.366582] PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff [ 0.366585] PCI: Bridge: 0000:00:0e.0 [ 0.366586] IO window: 6000-6fff [ 0.366588] MEM window: 0xfa000000-0xfcffffff [ 0.366590] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [ 0.366597] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 0.366604] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.366609] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.366613] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 0.366618] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 0.366651] NET: Registered protocol family 2 [ 0.368025] Time: acpi_pm clocksource has been installed. [ 0.368041] Switched to high resolution mode on CPU 0 [ 0.136023] Switched to high resolution mode on CPU 1 [ 0.384060] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.384060] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.384060] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.384060] TCP: Hash tables configured (established 131072 bind 65536) [ 0.384060] TCP reno registered [ 0.392061] checking if image is initramfs... it is [ 3.069526] Freeing initrd memory: 40475k freed [ 2.850508] audit: initializing netlink socket (disabled) [ 2.850508] type=2000 audit(1202426475.068:1): initialized [ 2.850509] highmem bounce pool size: 64 pages [ 2.850509] VFS: Disk quotas dquot_6.5.1 [ 2.850509] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.850509] io scheduler noop registered [ 2.850509] io scheduler anticipatory registered [ 2.850509] io scheduler deadline registered [ 2.850509] io scheduler cfq registered (default) [ 2.856244] pci 0000:00:0b.0: Linking AER extended capability [ 2.856247] pci 0000:00:0c.0: Linking AER extended capability [ 2.856250] pci 0000:00:0d.0: Linking AER extended capability [ 2.856253] pci 0000:00:0e.0: Linking AER extended capability [ 2.856259] pci 0000:05:00.0: Boot video device [ 2.856355] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 2.856369] assign_interrupt_mode Found MSI capability [ 2.856371] Allocate Port Service[0000:00:0b.0:pcie00] [ 2.856408] Allocate Port Service[0000:00:0b.0:pcie03] [ 2.856462] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 2.856475] assign_interrupt_mode Found MSI capability [ 2.856476] Allocate Port Service[0000:00:0c.0:pcie00] [ 2.856513] Allocate Port Service[0000:00:0c.0:pcie03] [ 2.856565] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 2.856577] assign_interrupt_mode Found MSI capability [ 2.856579] Allocate Port Service[0000:00:0d.0:pcie00] [ 2.856614] Allocate Port Service[0000:00:0d.0:pcie03] [ 2.856667] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 2.856679] assign_interrupt_mode Found MSI capability [ 2.856681] Allocate Port Service[0000:00:0e.0:pcie00] [ 2.856717] Allocate Port Service[0000:00:0e.0:pcie03] [ 2.857007] isapnp: Scanning for PnP cards... [ 3.207840] isapnp: No Plug & Play device found [ 3.232509] Real Time Clock Driver v1.12ac [ 3.232646] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 3.232762] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.233297] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.234290] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 3.234296] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 3.234298] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 3.234749] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.237537] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.237542] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.472226] mice: PS/2 mouse device common for all mice [ 3.472379] EISA: Probing bus 0 at eisa.0 [ 3.472390] Cannot allocate resource for EISA slot 4 [ 3.472394] Cannot allocate resource for EISA slot 6 [ 3.472395] Cannot allocate resource for EISA slot 7 [ 3.472397] Cannot allocate resource for EISA slot 8 [ 3.472398] EISA: Detected 0 cards. [ 3.472727] TCP cubic registered [ 3.472739] NET: Registered protocol family 1 [ 3.472766] Starting balanced_irq [ 3.472809] Using IPI No-Shortcut mode [ 3.473319] Freeing unused kernel memory: 336k freed [ 3.495269] input: AT Translated Set 2 keyboard as /class/input/input0 [ 4.649323] fuse init (API version 7.9) [ 4.478072] ACPI: Fan [FAN] (on) [ 4.660107] ACPI: Thermal Zone [THRM] (22 C) [ 4.888365] SCSI subsystem initialized [ 4.965080] usbcore: registered new interface driver usbfs [ 4.965080] usbcore: registered new interface driver hub [ 4.969244] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 4.969572] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 4.969579] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23 [ 4.969585] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 5.130793] libata version 3.00 loaded. [ 5.130793] usbcore: registered new device driver usb [ 5.139406] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.522646] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:19:db:6d:3f:1b [ 5.522646] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3 [ 5.663118] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 5.663127] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 [ 5.663138] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 5.663141] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 5.663331] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 5.663362] ehci_hcd 0000:00:02.1: debug port 1 [ 5.663365] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 5.663374] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 5.678754] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.678755] usb usb1: configuration #1 chosen from 1 choice [ 5.678755] hub 1-0:1.0: USB hub found [ 5.678755] hub 1-0:1.0: 10 ports detected [ 5.786254] NFORCE-CK804: 0000:00:06.0 (rev f3) UDMA133 controller [ 5.786254] NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xf3) at PCI slot 0000:00:06.0 [ 5.786254] NFORCE-CK804: not 100% native mode: will probe irqs later [ 5.786254] NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. [ 5.786254] ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA [ 5.786254] ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA [ 5.786254] Probing IDE interface ide0... [ 6.077497] hdb: Maxtor 6L250R0, ATA DISK drive [ 6.273967] usb 1-7: new high speed USB device using ehci_hcd and address 3 [ 6.425687] hda: WDC WD2500JB-55REA0, ATA DISK drive [ 6.425687] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 6.425687] hda: UDMA/100 mode selected [ 6.425687] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 6.425687] hdb: UDMA/133 mode selected [ 6.425687] Probing IDE interface ide1... [ 6.486786] usb 1-7: configuration #1 chosen from 1 choice [ 6.493495] usbcore: registered new interface driver libusual [ 6.499772] Initializing USB Mass Storage driver... [ 6.499891] scsi0 : SCSI emulation for USB Mass Storage devices [ 6.499958] usbcore: registered new interface driver usb-storage [ 6.499960] USB Mass Storage support registered. [ 6.500122] usb-storage: device found at 3 [ 6.500124] usb-storage: waiting for device to settle before scanning [ 6.729242] hdd: Maxtor 6Y120P0, ATA DISK drive [ 7.071602] hdc: WDC WD2000BB-22GUC0, ATA DISK drive [ 7.071624] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 7.072838] hdc: UDMA/100 mode selected [ 7.074074] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 7.074175] hdd: UDMA/133 mode selected [ 7.074301] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 7.114950] ide1 at 0x170-0x177,0x376 on irq 15 [ 7.127133] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 7.127140] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 21 [ 7.127153] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 7.127155] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 7.127189] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 7.127203] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000 [ 7.134082] hda: max request size: 512KiB [ 7.148947] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63 [ 7.148984] hda: cache flushes supported [ 7.148984] hda: hda1 [ 7.160442] hdb: max request size: 512KiB [ 7.162953] hdb: 490234752 sectors (251000 MB) w/16384KiB Cache, CHS=30515/255/63 [ 7.165978] hdb: cache flushes supported [ 7.165978] hdb: hdb1 [ 7.170693] hdc: max request size: 512KiB [ 7.171913] hdc: 390721968 sectors (200049 MB) w/2048KiB Cache, CHS=24321/255/63 [ 7.174295] hdc: cache flushes supported [ 7.174310] hdc: hdc1 hdc2 [ 7.200693] usb usb2: configuration #1 chosen from 1 choice [ 7.200712] hub 2-0:1.0: USB hub found [ 7.200721] hub 2-0:1.0: 10 ports detected [ 7.221474] hdd: max request size: 128KiB [ 7.221582] hdd: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63 [ 7.221697] hdd: cache flushes supported [ 7.221697] hdd: hdd1 [ 7.322115] sata_nv 0000:00:07.0: version 3.5 [ 7.322503] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 7.322510] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20 [ 7.322514] sata_nv 0000:00:07.0: Using ADMA mode [ 7.322557] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 7.322811] scsi1 : sata_nv [ 7.322811] scsi2 : sata_nv [ 7.322811] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 20 [ 7.322811] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 20 [ 7.455185] kjournald starting. Commit interval 5 seconds [ 7.499053] EXT3-fs: mounted filesystem with ordered data mode. [ 7.666331] usb 2-3: new full speed USB device using ohci_hcd and address 2 [ 7.875127] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.811068] ata1.00: ATA-7: Maxtor 7L250S0, BACE1G20, max UDMA/133 [ 7.811068] ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 7.911241] ata1.00: configured for UDMA/133 [ 7.938562] usb 2-3: configuration #1 chosen from 1 choice [ 7.943472] scsi3 : SCSI emulation for USB Mass Storage devices [ 7.856489] usb-storage: device found at 2 [ 7.856489] usb-storage: waiting for device to settle before scanning [ 8.342614] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.536092] ata2.00: ATA-7: ST3750640NS, 3.AEG, max UDMA/133 [ 8.536092] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 8.614840] ata2.00: configured for UDMA/133 [ 8.614840] scsi 1:0:0:0: Direct-Access ATA Maxtor 7L250S0 BACE PQ: 0 ANSI: 5 [ 8.614840] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 8.614840] scsi 2:0:0:0: Direct-Access ATA ST3750640NS 3.AE PQ: 0 ANSI: 5 [ 8.614840] ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 8.614840] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 8.614840] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 8.614840] sata_nv 0000:00:08.0: Using ADMA mode [ 8.614840] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 8.614840] scsi4 : sata_nv [ 8.614840] scsi5 : sata_nv [ 8.614840] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 23 [ 8.614840] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 23 [ 8.819670] ata3: SATA link down (SStatus 0 SControl 300) [ 9.330169] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.387030] ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 [ 9.387032] ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 9.702811] ata4.00: configured for UDMA/133 [ 9.702811] scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 [ 9.702811] ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 12.590834] usb-storage: device scan complete [ 11.914367] scsi 0:0:0:0: CD-ROM MAD DOG MD-16XDVD9 2.FD PQ: 0 ANSI: 0 [ 13.311942] usb-storage: device scan complete [ 13.996284] scsi 3:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 14.002331] scsi 3:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 14.009321] scsi 3:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 14.016300] scsi 3:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 14.773562] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 14.887586] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.123764] NET: Registered protocol family 10 [ 15.124098] lo: Disabled Privacy Extensions [ 15.397975] input: Power Button (FF) as /class/input/input1 [ 15.432026] ACPI: Power Button (FF) [PWRF] [ 15.432073] input: Power Button (CM) as /class/input/input2 [ 15.482981] ACPI: Power Button (CM) [PWRB] [ 15.513125] input: PC Speaker as /class/input/input3 [ 15.987721] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 15.987721] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 15.470855] Driver 'sd' needs updating - please use bus_type methods [ 15.471506] sd 1:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB) [ 15.471527] sd 1:0:0:0: [sda] Write Protect is off [ 15.471530] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.471563] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 15.471656] sd 1:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB) [ 15.471673] sd 1:0:0:0: [sda] Write Protect is off [ 15.471675] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.471706] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 15.471709] sda: sda1 [ 16.224423] sd 1:0:0:0: [sda] Attached SCSI disk [ 16.224506] sd 2:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB) [ 16.224525] sd 2:0:0:0: [sdb] Write Protect is off [ 16.224528] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 16.224560] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.224599] sd 2:0:0:0: [sdb] 1465149168 512-byte hardware sectors (750156 MB) [ 16.224599] sd 2:0:0:0: [sdb] Write Protect is off [ 16.224599] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 16.224599] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.224599] sdb:<4>Driver 'sr' needs updating - please use bus_type methods [ 16.246139] sdb1 sdb2 [ 16.246139] sd 2:0:0:0: [sdb] Attached SCSI disk [ 16.261240] sd 5:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) [ 16.261262] sd 5:0:0:0: [sdc] Write Protect is off [ 16.261265] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 16.261297] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.261381] sd 5:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB) [ 16.261399] sd 5:0:0:0: [sdc] Write Protect is off [ 16.261400] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 16.261432] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.261434] sdc: sdc1 [ 15.555810] sd 5:0:0:0: [sdc] Attached SCSI disk [ 15.572777] sd 3:0:0:0: [sdd] Attached SCSI removable disk [ 15.582914] sd 3:0:0:1: [sde] Attached SCSI removable disk [ 15.594896] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 15.594900] Uniform CD-ROM driver Revision: 3.20 [ 15.594960] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 15.596922] sd 3:0:0:2: [sdf] Attached SCSI removable disk [ 15.612209] sd 3:0:0:3: [sdg] Attached SCSI removable disk [ 15.634329] input: ImPS/2 Generic Wheel Mouse as /class/input/input4 [ 16.367625] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 16.367649] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 16.367669] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 16.367687] sr 0:0:0:0: Attached scsi generic sg3 type 5 [ 16.367706] sd 3:0:0:0: Attached scsi generic sg4 type 0 [ 16.367725] sd 3:0:0:1: Attached scsi generic sg5 type 0 [ 16.367740] sd 3:0:0:2: Attached scsi generic sg6 type 0 [ 16.367756] sd 3:0:0:3: Attached scsi generic sg7 type 0 [ 16.382067] parport_pc 00:08: reported by Plug and Play ACPI [ 16.382067] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 16.792680] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 16.792687] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22 [ 16.792715] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 17.170115] intel8x0_measure_ac97_clock: measured 54728 usecs [ 17.170118] intel8x0: clocking to 46910 [ 17.562015] lp0: using parport0 (interrupt-driven). [ 17.652466] Adding 10241428k swap on /dev/hdc2. Priority:-1 extents:1 across:10241428k [ 17.994151] EXT3 FS on hda1, internal journal [ 28.007906] eth1: no IPv6 routers present [ 205.567025] kjournald starting. Commit interval 5 seconds [ 205.572753] EXT3 FS on hdb1, internal journal [ 205.572757] EXT3-fs: mounted filesystem with ordered data mode. [ 205.663332] kjournald starting. Commit interval 5 seconds [ 205.670365] EXT3 FS on hdc1, internal journal [ 205.670368] EXT3-fs: mounted filesystem with ordered data mode. [ 205.696712] kjournald starting. Commit interval 5 seconds [ 205.704833] EXT3 FS on hdd1, internal journal [ 205.704833] EXT3-fs: mounted filesystem with ordered data mode. [ 205.742061] kjournald starting. Commit interval 5 seconds [ 205.755366] EXT3 FS on sda1, internal journal [ 205.755369] EXT3-fs: mounted filesystem with ordered data mode. [ 205.799409] kjournald starting. Commit interval 5 seconds [ 205.806302] EXT3 FS on sdb1, internal journal [ 205.806305] EXT3-fs: mounted filesystem with ordered data mode. [ 205.852981] kjournald starting. Commit interval 5 seconds [ 205.859914] EXT3 FS on sdb2, internal journal [ 205.859917] EXT3-fs: mounted filesystem with ordered data mode. [ 205.902852] kjournald starting. Commit interval 5 seconds [ 205.910977] EXT3 FS on sdc1, internal journal [ 205.910977] EXT3-fs: mounted filesystem with ordered data mode. [ 207.353851] No dock devices found. [ 207.383652] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 190.611292] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (2 cpu cores) (version 2.20.00) [ 207.792123] powernow-k8: MP systems not supported by PSB BIOS structure [ 190.611536] powernow-k8: MP systems not supported by PSB BIOS structure [ 211.617930] ppdev: user-space parallel port driver [ 213.750362] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 213.750369] apm: disabled - APM is not SMP safe. [ 211.009415] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists