[ 0.000000] Linux version 2.6.24.1 (tvrtko@sol) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP PREEMPT Sat Feb 9 08:43:29 GMT 2008 [ 0.000000] Command line: root=UUID=5781d9c0-be35-41cc-9eca-64e5d8fffbe4 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077000000 (usable) [ 0.000000] BIOS-e820: 0000000077000000 - 000000007f000000 (reserved) [ 0.000000] BIOS-e820: 000000007f000000 - 000000007fdf0000 (usable) [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e2000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 487424) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 520192, 523760) 2 entries of 256 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F65D0, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT 7FEF3040, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: FACP 7FEF30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: DSDT 7FEF3180, 52C6 (r1 GBT GBTUACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 7FEF1800, 0040 [ 0.000000] ACPI: HPET 7FEF85C0, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) [ 0.000000] ACPI: MCFG 7FEF8640, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: APIC 7FEF84C0, 0098 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) [ 0.000000] ACPI: SSDT 7FEF8CE0, 02FC (r1 PmRef CpuPm 3000 INTL 20040311) [ 0.000000] Entering add_active_range(0, 0, 158) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 487424) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 520192, 523760) 2 entries of 256 used [ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 158 [ 0.000000] 0: 256 -> 487424 [ 0.000000] 0: 520192 -> 523760 [ 0.000000] On node 0 totalpages: 490894 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1003 pages reserved [ 0.000000] DMA zone: 2939 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7104 pages used for memmap [ 0.000000] DMA32 zone: 479792 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] swsusp: Registered nosave memory region: 0000000077000000 - 000000007f000000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 32800 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 482731 [ 0.000000] Kernel command line: root=UUID=5781d9c0-be35-41cc-9eca-64e5d8fffbe4 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 16.611324] time.c: Detected 2333.332 MHz processor. [ 16.613792] Console: colour VGA+ 80x25 [ 16.613795] console [tty0] enabled [ 16.614959] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 16.615862] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 16.615991] Checking aperture... [ 16.633142] Memory: 1922140k/2095040k available (2142k kernel code, 40792k reserved, 1073k data, 220k init) [ 16.633175] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 16.692150] Calibrating delay using timer specific routine.. 4670.26 BogoMIPS (lpj=2335133) [ 16.692174] Security Framework initialized [ 16.692183] Capability LSM initialized [ 16.692193] Mount-cache hash table entries: 256 [ 16.692305] CPU: L1 I cache: 32K, L1 D cache: 32K [ 16.692307] CPU: L2 cache: 4096K [ 16.692309] using mwait in idle threads. [ 16.692310] CPU: Physical Processor ID: 0 [ 16.692311] CPU: Processor Core ID: 0 [ 16.692316] CPU0: Thermal monitoring enabled (TM2) [ 16.692326] SMP alternatives: switching to UP code [ 16.692732] ACPI: Core revision 20070126 [ 16.706424] Using local APIC timer interrupts. [ 16.749201] APIC timer calibration result 20833311 [ 16.749202] Detected 20.833 MHz APIC timer. [ 16.749280] SMP alternatives: switching to SMP code [ 16.749574] Booting processor 1/2 APIC 0x1 [ 16.761049] Initializing CPU#1 [ 16.820067] Calibrating delay using timer specific routine.. 4666.63 BogoMIPS (lpj=2333316) [ 16.820072] CPU: L1 I cache: 32K, L1 D cache: 32K [ 16.820073] CPU: L2 cache: 4096K [ 16.820075] CPU: Physical Processor ID: 0 [ 16.820075] CPU: Processor Core ID: 1 [ 16.820080] CPU1: Thermal monitoring enabled (TM2) [ 16.820479] Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b [ 16.820537] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 16.840518] Brought up 2 CPUs [ 16.840697] net_namespace: 120 bytes [ 16.840961] NET: Registered protocol family 16 [ 16.841075] ACPI: bus type pci registered [ 16.842201] PCI: Using MMCONFIG at e0000000 - e1ffffff [ 16.842673] mtrr: your CPUs had inconsistent fixed MTRR settings [ 16.842674] mtrr: probably your BIOS does not setup all CPUs. [ 16.842675] mtrr: corrected configuration. [ 16.843656] ACPI: EC: Look up EC in DSDT [ 16.848056] ACPI: Interpreter enabled [ 16.848058] ACPI: (supports S0 S3 S4 S5) [ 16.848068] ACPI: Using IOAPIC for interrupt routing [ 16.854590] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 16.855700] PCI: Transparent bridge - 0000:00:0a.0 [ 16.855836] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 16.856013] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 16.896492] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.896613] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.896733] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15) [ 16.896851] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.896973] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.897091] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.897209] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.897327] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.897445] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.897564] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15) [ 16.897682] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 16.897801] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 16.897927] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0 [ 16.898047] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0 [ 16.898166] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 16.898285] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 16.898403] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.898522] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 16.898646] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 16.898766] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 16.898917] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 16.899061] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 16.899202] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 16.899343] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 16.899484] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 16.899625] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 16.899766] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 16.899907] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 16.900051] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 16.900193] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0 [ 16.900335] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0 [ 16.900477] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0 [ 16.900619] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0 [ 16.900761] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 16.900903] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 16.901048] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 16.901189] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 16.901333] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 16.901476] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 16.901620] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 16.901712] Linux Plug and Play Support v0.97 (c) Adam Belay [ 16.901732] pnp: PnP ACPI init [ 16.901738] ACPI: bus type pnp registered [ 16.904934] pnp: PnP ACPI: found 12 devices [ 16.904936] ACPI: ACPI bus type pnp unregistered [ 16.905026] PCI: Using ACPI for IRQ routing [ 16.905028] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 16.908984] PCI-GART: No AMD northbridge found. [ 16.908990] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 16.908993] hpet0: 3 32-bit timers, 25000000 Hz [ 16.910986] Time: tsc clocksource has been installed. [ 16.913050] system 00:01: ioport range 0x1000-0x107f has been reserved [ 16.913052] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 16.913054] system 00:01: ioport range 0x1400-0x147f has been reserved [ 16.913056] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 16.913058] system 00:01: ioport range 0x1800-0x187f has been reserved [ 16.913060] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 16.913063] system 00:01: iomem range 0x0-0x0 could not be reserved [ 16.913065] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 16.913067] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved [ 16.913069] system 00:01: iomem range 0x77000000-0x7effffff could not be reserved [ 16.913074] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 16.913076] system 00:02: ioport range 0x800-0x87f has been reserved [ 16.913078] system 00:02: ioport range 0x295-0x314 has been reserved [ 16.913080] system 00:02: ioport range 0x290-0x294 has been reserved [ 16.913081] system 00:02: ioport range 0x880-0x88f has been reserved [ 16.913088] system 00:0a: iomem range 0xe0000000-0xe1ffffff could not be reserved [ 16.913093] system 00:0b: iomem range 0xd0000-0xd3fff has been reserved [ 16.913095] system 00:0b: iomem range 0xd6800-0xd7fff has been reserved [ 16.913097] system 00:0b: iomem range 0xf0000-0xfbfff could not be reserved [ 16.913099] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 16.913101] system 00:0b: iomem range 0x7fef0000-0x7fefffff could not be reserved [ 16.913104] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved [ 16.913106] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 16.913108] system 00:0b: iomem range 0x100000-0x7feeffff could not be reserved [ 16.913110] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved [ 16.913112] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved [ 16.913403] PCI: Bridge: 0000:00:0a.0 [ 16.913404] IO window: disabled. [ 16.913406] MEM window: e5000000-e50fffff [ 16.913408] PREFETCH window: disabled. [ 16.913410] PCI: Bridge: 0000:00:0b.0 [ 16.913411] IO window: 9000-9fff [ 16.913412] MEM window: disabled. [ 16.913414] PREFETCH window: disabled. [ 16.913415] PCI: Bridge: 0000:00:0c.0 [ 16.913416] IO window: b000-bfff [ 16.913418] MEM window: disabled. [ 16.913419] PREFETCH window: disabled. [ 16.913420] PCI: Bridge: 0000:00:0d.0 [ 16.913421] IO window: a000-afff [ 16.913422] MEM window: disabled. [ 16.913424] PREFETCH window: disabled. [ 16.913429] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 16.913434] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 16.913438] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 16.913441] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 16.913447] NET: Registered protocol family 2 [ 16.922217] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 16.922454] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 16.923821] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 16.924385] TCP: Hash tables configured (established 262144 bind 65536) [ 16.924387] TCP reno registered [ 16.927370] checking if image is initramfs... it is [ 17.171242] Switched to high resolution mode on CPU 1 [ 17.171754] Switched to high resolution mode on CPU 0 [ 17.293466] Freeing initrd memory: 4807k freed [ 17.297669] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 17.297673] io scheduler noop registered [ 17.297674] io scheduler anticipatory registered [ 17.297675] io scheduler deadline registered [ 17.297741] io scheduler cfq registered (default) [ 80.466114] Boot video device is 0000:00:10.0 [ 80.466228] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 80.466239] assign_interrupt_mode Found MSI capability [ 80.466250] Allocate Port Service[0000:00:0b.0:pcie00] [ 80.466275] Allocate Port Service[0000:00:0b.0:pcie03] [ 80.466312] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 80.466322] assign_interrupt_mode Found MSI capability [ 80.466331] Allocate Port Service[0000:00:0c.0:pcie00] [ 80.466354] Allocate Port Service[0000:00:0c.0:pcie03] [ 80.466389] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 80.466400] assign_interrupt_mode Found MSI capability [ 80.466408] Allocate Port Service[0000:00:0d.0:pcie00] [ 80.466431] Allocate Port Service[0000:00:0d.0:pcie03] [ 80.467950] Real Time Clock Driver v1.12ac [ 80.468070] hpet_resources: 0xfeff0000 is busy [ 80.468091] Linux agpgart interface v0.102 [ 80.468093] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 80.468189] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 80.468506] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 80.468962] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 80.469045] PNP: No PS/2 controller found. Probing ports directly. [ 80.502667] Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 80.502669] If AUX port is really absent please use the 'i8042.noaux' option. [ 80.752182] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 80.752265] mice: PS/2 mouse device common for all mice [ 80.752289] cpuidle: using governor ladder [ 80.752290] cpuidle: using governor menu [ 80.752342] TCP cubic registered [ 80.752385] NET: Registered protocol family 1 [ 80.752473] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 80.752478] Freeing unused kernel memory: 220k freed [ 81.863589] fuse init (API version 7.9) [ 81.868938] ACPI: SSDT 7FEF86C0, 022A (r1 PmRef Cpu0Ist 3000 INTL 20040311) [ 81.869177] ACPI: SSDT 7FEF8B80, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20040311) [ 81.869316] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 81.869324] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126] [ 82.035151] SCSI subsystem initialized [ 82.038621] usbcore: registered new interface driver usbfs [ 82.038641] usbcore: registered new interface driver hub [ 82.038784] usbcore: registered new device driver usb [ 82.040101] libata version 3.00 loaded. [ 82.040405] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 82.040412] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [ 82.042268] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 82.042533] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23 [ 82.042538] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [AUBA] -> GSI 23 (level, low) -> IRQ 23 [ 82.043257] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 82.043261] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 82.043339] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 [ 82.043352] ohci_hcd 0000:00:04.0: irq 23, io mem 0xe5108000 [ 82.095799] usb usb1: configuration #1 chosen from 1 choice [ 82.095817] hub 1-0:1.0: USB hub found [ 82.095823] hub 1-0:1.0: 10 ports detected [ 82.097944] firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI version 1.10 [ 82.197787] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22 [ 82.197792] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 22 [ 82.198846] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 82.198849] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 82.198890] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 82.198910] ehci_hcd 0000:00:04.1: debug port 1 [ 82.198913] PCI: cache line size of 32 is not supported by device 0000:00:04.1 [ 82.198921] ehci_hcd 0000:00:04.1: irq 22, io mem 0xe5107000 [ 82.199903] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 82.199906] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 82.204749] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 82.204831] usb usb2: configuration #1 chosen from 1 choice [ 82.204851] hub 2-0:1.0: USB hub found [ 82.204855] hub 2-0:1.0: 10 ports detected [ 82.305585] ahci 0000:00:0e.0: version 3.0 [ 82.305840] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 82.305846] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21 [ 82.596840] firewire_core: created new fw device fw0 (0 config rom retries, S400) [ 83.099893] usb 2-4: new high speed USB device using ehci_hcd and address 4 [ 83.215011] usb 2-4: configuration #1 chosen from 1 choice [ 83.215214] hub 2-4:1.0: USB hub found [ 83.215447] hub 2-4:1.0: 4 ports detected [ 83.305534] ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 83.305537] ahci 0000:00:0e.0: flags: 64bit sntf led clo pmp pio [ 83.305540] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 83.305720] scsi0 : ahci [ 83.305755] scsi1 : ahci [ 83.305781] scsi2 : ahci [ 83.305807] scsi3 : ahci [ 83.305866] ata1: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104100 irq 316 [ 83.305868] ata2: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104180 irq 316 [ 83.305870] ata3: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104200 irq 316 [ 83.305871] ata4: SATA max UDMA/133 abar m8192@0xe5104000 port 0xe5104280 irq 316 [ 83.578039] usb 1-1: new full speed USB device using ohci_hcd and address 2 [ 83.609981] ata1: SATA link down (SStatus 0 SControl 300) [ 83.783469] usb 1-1: configuration #1 chosen from 1 choice [ 84.049192] usb 1-2: new low speed USB device using ohci_hcd and address 3 [ 84.217890] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 84.236683] ata2.00: ATA-8: WDC WD3200AAKS-00VYA0, 12.01B02, max UDMA/133 [ 84.236686] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 84.237425] ata2.00: configured for UDMA/133 [ 84.240578] usb 1-2: configuration #1 chosen from 1 choice [ 84.413731] usb 2-4.1: new high speed USB device using ehci_hcd and address 5 [ 84.502743] usb 2-4.1: configuration #1 chosen from 1 choice [ 84.504193] usbcore: registered new interface driver hiddev [ 84.515014] input: PDT VoIPVoice USB Phone as /class/input/input0 [ 84.517356] input: USB HID v1.00 Device [PDT VoIPVoice USB Phone] on usb-0000:00:04.0-1 [ 84.523162] input: BTC USB Multimedia Cordless Kit as /class/input/input1 [ 84.525337] input: USB HID v1.00 Keyboard [BTC USB Multimedia Cordless Kit ] on usb-0000:00:04.0-2 [ 84.538423] input: BTC USB Multimedia Cordless Kit as /class/input/input2 [ 84.546334] input,hiddev96: USB HID v1.00 Mouse [BTC USB Multimedia Cordless Kit ] on usb-0000:00:04.0-2 [ 84.546345] usbcore: registered new interface driver usbhid [ 84.546348] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 84.546729] usbcore: registered new interface driver libusual [ 84.549002] Initializing USB Mass Storage driver... [ 84.549617] scsi4 : SCSI emulation for USB Mass Storage devices [ 84.549983] usbcore: registered new interface driver usb-storage [ 84.549986] USB Mass Storage support registered. [ 84.550049] usb-storage: device found at 5 [ 84.550050] usb-storage: waiting for device to settle before scanning [ 84.844763] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 84.845851] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203N, SB01, max UDMA/100, ATAPI AN [ 84.997350] ata3.00: configured for UDMA/100 [ 85.300946] ata4: SATA link down (SStatus 0 SControl 300) [ 85.301036] scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5 [ 85.301667] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203N SB01 PQ: 0 ANSI: 5 [ 85.301748] NFORCE-MCP73: IDE controller (0x10de:0x056c rev 0xa1) at PCI slot 0000:00:08.0 [ 85.301772] NFORCE-MCP73: not 100% native mode: will probe irqs later [ 85.301776] NFORCE-MCP73: 0000:00:08.0 (rev a1) UDMA133 controller [ 85.301781] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 85.301786] NFORCE-MCP73: IDE port disabled [ 85.301789] Probing IDE interface ide0... [ 85.307804] Driver 'sd' needs updating - please use bus_type methods [ 85.307849] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 85.307857] sd 1:0:0:0: [sda] Write Protect is off [ 85.307858] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 85.307870] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 85.307902] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 85.307908] sd 1:0:0:0: [sda] Write Protect is off [ 85.307910] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 85.307924] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 85.307927] sda: sda1 sda2 sda3 sda4 <<4>Driver 'sr' needs updating - please use bus_type methods [ 85.322642] sda5 sda6 sda7 sda8 sda9 > [ 85.348854] sd 1:0:0:0: [sda] Attached SCSI disk [ 85.351787] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 85.351801] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 85.355251] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 85.355254] Uniform CD-ROM driver Revision: 3.20 [ 85.355283] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 85.621136] Attempting manual resume [ 85.621138] swsusp: Resume From Partition 8:2 [ 85.621140] PM: Checking swsusp image. [ 85.665528] PM: Resume from disk failed. [ 85.668808] JFS: nTxBlock = 8192, nTxLock = 65536 [ 85.819054] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 85.819356] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 85.819362] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APCH] -> GSI 20 (level, low) -> IRQ 20 [ 85.819366] PCI: Setting latency timer of device 0000:00:0f.0 to 64 [ 86.330777] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:4d:59:db:59 [ 86.330780] forcedeth 0000:00:0f.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 89.540463] usb-storage: device scan complete [ 89.541082] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 89.542081] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 89.543080] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 89.544474] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 89.548098] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 89.548129] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 89.550079] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 89.550102] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 89.552078] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 89.552103] sd 4:0:0:2: Attached scsi generic sg4 type 0 [ 89.555073] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 89.555099] sd 4:0:0:3: Attached scsi generic sg5 type 0 [ 89.917685] input: Power Button (FF) as /class/input/input3 [ 89.930889] ACPI: Power Button (FF) [PWRF] [ 89.930935] input: Power Button (CM) as /class/input/input4 [ 89.946858] ACPI: Power Button (CM) [PWRB] [ 90.358790] input: PC Speaker as /class/input/input5 [ 90.538483] nvidia: module license 'NVIDIA' taints kernel. [ 90.717296] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 90.717300] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 90.718224] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 90.769350] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... [ 90.837690] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22 [ 90.837693] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [AIGP] -> GSI 22 (level, low) -> IRQ 22 [ 90.837698] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 90.837781] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11 14:04:37 PST 2008 [ 91.098364] usbcore: registered new interface driver snd-usb-audio [ 91.786114] it87: Found IT8718F chip at 0x290, revision 4 [ 91.786124] it87: in3 is VCC (+5V) [ 91.790763] coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong! [ 91.790795] coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong! [ 91.837871] Adding 2000084k swap on /dev/sda2. Priority:-1 extents:1 across:2000084k [ 92.257649] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 92.959304] kjournald starting. Commit interval 5 seconds [ 92.967363] EXT3 FS on sda1, internal journal [ 92.967366] EXT3-fs: mounted filesystem with ordered data mode. [ 94.267461] No dock devices found. [ 97.281227] NET: Registered protocol family 10 [ 97.281380] lo: Disabled Privacy Extensions [ 105.633591] Bluetooth: Core ver 2.11 [ 105.633647] NET: Registered protocol family 31 [ 105.633648] Bluetooth: HCI device and connection manager initialized [ 105.633651] Bluetooth: HCI socket layer initialized [ 105.641882] Bluetooth: L2CAP ver 2.9 [ 105.641886] Bluetooth: L2CAP socket layer initialized [ 105.649888] Bluetooth: RFCOMM socket layer initialized [ 105.649901] Bluetooth: RFCOMM TTY layer initialized [ 105.649903] Bluetooth: RFCOMM ver 1.8 [ 109.731886] NET: Registered protocol family 17 [ 122.313358] eth0: no IPv6 routers present