| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200802091559.55625.zouhair@infonux.org> Date: Sat, 9 Feb 2008 15:59:55 +0100 From: Mr Souissi <zouhair.s@...il.com> To: linux-kernel@...r.kernel.org Subject: acer aspire 5720ZG APIC error on CPU0: 40(40) ACPI/USB hi my (DVB) Pinnacle pctv 400e, freeze after error "APIC error on CPU0: 40(40)" in syslog. work without problem in m$ windos and, test it in other computer (althlon 2000xp) with same drivers, work fine my webcam logitec nx pro, freeze too, after error "APIC error on CPU0: 40 (40)" ... found same problem here http://lists-archives.org/video4linux/18626-dvb-usb-bulk-message-failed.html booting with "noapic" give same result :/ kernel tested: 2.6.22-3 (debian testing), 2.6.24, 2.6.24-git14, and 2.6.24.1 is ACPI bug ? but why i get problem only with usb ? cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz stepping : 13 cpu MHz : 800.000 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 2929.49 clflush size : 64 processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz stepping : 13 cpu MHz : 800.000 cache size : 1024 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 2926.00 clflush size : 64 lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GS (rev a1) 05:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) 06:00.0 Ethernet controller: Atheros Communications, Inc. AR5006EG 802.11 b/g Wireless PCI Express Adapter (rev 01) 07:00.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 07:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 07:00.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12) 07:00.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 07:00.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) syslog Feb 8 19:22:38 zz kernel: uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Feb 8 19:22:38 zz kernel: uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 93 us Feb 8 19:22:40 zz kernel: uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us Feb 8 19:25:25 zz kernel: usb usb1: usb resume Feb 8 19:25:25 zz kernel: usb usb1: finish resume Feb 8 19:25:25 zz kernel: hub 1-0:1.0: hub_resume Feb 8 19:25:25 zz kernel: ehci_hcd 0000:00:1a.7: resume root hub Feb 8 19:25:25 zz kernel: hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000 Feb 8 19:25:25 zz kernel: ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT Feb 8 19:25:25 zz kernel: hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s Feb 8 19:25:25 zz kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 Feb 8 19:25:25 zz kernel: ehci_hcd 0000:00:1a.7: port 1 high speed Feb 8 19:25:25 zz kernel: ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT Feb 8 19:25:25 zz kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2 Feb 8 19:25:25 zz kernel: ehci_hcd 0000:00:1a.7: port 1 high speed Feb 8 19:25:25 zz kernel: ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT Feb 8 19:25:25 zz kernel: usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0 Feb 8 19:25:25 zz kernel: usb 1-1: uevent Feb 8 19:25:25 zz kernel: usb 1-1: usb_probe_device Feb 8 19:25:25 zz kernel: usb 1-1: configuration #1 chosen from 1 choice Feb 8 19:25:25 zz kernel: usb 1-1: adding 1-1:1.0 (config #1, interface 0) Feb 8 19:25:25 zz kernel: usb 1-1:1.0: uevent Feb 8 19:25:25 zz kernel: usb 1-1:1.0: uevent Feb 8 19:25:25 zz kernel: drivers/usb/core/inode.c: creating file '002' Feb 8 19:25:26 zz kernel: dvb_usb_ttusb2 1-1:1.0: usb_probe_interface Feb 8 19:25:26 zz kernel: dvb_usb_ttusb2 1-1:1.0: usb_probe_interface - got id Feb 8 19:25:26 zz kernel: dvb-usb: found a 'Pinnacle 400e DVB-S USB2.0' in cold state, will try to load a firmware Feb 8 19:25:26 zz kernel: dvb-usb: downloading firmware from file 'dvb-usb-pctv-400e-01.fw' Feb 8 19:25:26 zz kernel: usbcore: registered new interface driver dvb_usb_ttusb2 Feb 8 19:25:26 zz kernel: hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0002 Feb 8 19:25:26 zz kernel: ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001002 POWER sig=se0 CSC Feb 8 19:25:26 zz kernel: hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s Feb 8 19:25:26 zz kernel: usb 1-1: USB disconnect, address 2 Feb 8 19:25:26 zz kernel: usb 1-1: unregistering device Feb 8 19:25:26 zz kernel: usb 1-1: usb_disable_device nuking all URBs Feb 8 19:25:26 zz kernel: usb 1-1: unregistering interface 1-1:1.0 Feb 8 19:25:26 zz kernel: dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. Feb 8 19:25:26 zz kernel: usb 1-1:1.0: uevent Feb 8 19:25:26 zz kernel: usb 1-1:1.0: uevent Feb 8 19:25:26 zz kernel: usb_endpoint usbdev1.2_ep00: ep_device_release called for usbdev1.2_ep00 Feb 8 19:25:26 zz kernel: usb 1-1: uevent Feb 8 19:25:26 zz kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 Feb 8 19:25:27 zz kernel: hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0002 Feb 8 19:25:27 zz kernel: ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT Feb 8 19:25:27 zz kernel: hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s Feb 8 19:25:27 zz kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 Feb 8 19:25:27 zz kernel: ehci_hcd 0000:00:1a.7: port 1 high speed Feb 8 19:25:27 zz kernel: ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT Feb 8 19:25:27 zz kernel: usb 1-1: new high speed USB device using ehci_hcd and address 3 Feb 8 19:25:27 zz kernel: ehci_hcd 0000:00:1a.7: port 1 high speed Feb 8 19:25:27 zz kernel: ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT Feb 8 19:25:28 zz kernel: usb 1-1: default language 0x0409 Feb 8 19:25:28 zz kernel: usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 Feb 8 19:25:28 zz kernel: usb 1-1: Product: PCTV 400e Feb 8 19:25:28 zz kernel: usb 1-1: Manufacturer: Pinnacle Feb 8 19:25:28 zz kernel: usb 1-1: uevent Feb 8 19:25:28 zz kernel: usb 1-1: usb_probe_device Feb 8 19:25:28 zz kernel: usb 1-1: configuration #1 chosen from 1 choice Feb 8 19:25:28 zz kernel: usb 1-1: adding 1-1:1.0 (config #1, interface 0) Feb 8 19:25:28 zz kernel: usb 1-1:1.0: uevent Feb 8 19:25:28 zz kernel: usb 1-1:1.0: uevent Feb 8 19:25:28 zz kernel: dvb_usb_ttusb2 1-1:1.0: usb_probe_interface Feb 8 19:25:28 zz kernel: dvb_usb_ttusb2 1-1:1.0: usb_probe_interface - got id Feb 8 19:25:28 zz kernel: dvb-usb: found a 'Pinnacle 400e DVB-S USB2.0' in warm state. Feb 8 19:25:28 zz kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Feb 8 19:25:28 zz kernel: DVB: registering new adapter (Pinnacle 400e DVB-S USB2.0). Feb 8 19:25:28 zz kernel: DVB: registering frontend 0 (Philips TDA10086 DVB-S)... Feb 8 19:25:28 zz kernel: dvb-usb: Pinnacle 400e DVB-S USB2.0 successfully initialized and connected. Feb 8 19:25:28 zz kernel: drivers/usb/core/inode.c: creating file '003' More info... here http://linuxdeb.free.fr/tmp/ attached files: config_2.6.24.1_core2.txt.gz, dmesg_2.6.24.1.txt.gz Thank you. Zouhair. Download attachment "config_2.6.24.1_core2.txt.gz" of type "application/x-gzip" (7474 bytes) Download attachment "dmesg_2.6.24.1.txt.gz" of type "application/x-gzip" (7697 bytes)
Powered by blists - more mailing lists