[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20080209080334.GA23177@gollum.tnic>
Date: Sat, 9 Feb 2008 09:03:34 +0100
From: Borislav Petkov <petkovbb@...glemail.com>
To: bzolnier@...il.com
Cc: linux-kernel@...r.kernel.org, linux-ide@...r.kernel.org
Subject: [PATCH] ide-floppy: remove struct idefloppy_id_gcw
commit a6aaf3dd3e88d1bd1e85fb4329042ecb9247e0eb
Author: Borislav Petkov <petkovbb@...il.com>
Date: Fri Feb 8 18:21:47 2008 +0100
ide-floppy: remove struct idefloppy_id_gcw
Signed-off-by: Borislav Petkov <petkovbb@...il.com>
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index faf22d7..5d5bde8 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -195,32 +195,6 @@ enum {
#define IDEFLOPPY_ERROR_GENERAL 101
/*
- * The following is used to format the general configuration word of the
- * ATAPI IDENTIFY DEVICE command.
- */
-struct idefloppy_id_gcw {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned packet_size :2; /* Packet Size */
- unsigned reserved234 :3; /* Reserved */
- unsigned drq_type :2; /* Command packet DRQ type */
- unsigned removable :1; /* Removable media */
- unsigned device_type :5; /* Device type */
- unsigned reserved13 :1; /* Reserved */
- unsigned protocol :2; /* Protocol type */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned protocol :2; /* Protocol type */
- unsigned reserved13 :1; /* Reserved */
- unsigned device_type :5; /* Device type */
- unsigned removable :1; /* Removable media */
- unsigned drq_type :2; /* Command packet DRQ type */
- unsigned reserved234 :3; /* Reserved */
- unsigned packet_size :2; /* Packet Size */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
-};
-
-/*
* Pages of the SELECT SENSE / MODE SENSE packet commands.
* See SFF-8070i spec.
*/
@@ -1271,32 +1245,40 @@ static sector_t idefloppy_capacity(ide_drive_t *drive)
*/
static int idefloppy_identify_device(ide_drive_t *drive, struct hd_driveid *id)
{
- struct idefloppy_id_gcw gcw;
+ u8 gcw[2];
+ u8 device_type, protocol, removable, drq_type, packet_size;
*((u16 *) &gcw) = id->config;
+ device_type = gcw[1] & 0x1F;
+ removable = (gcw[0] & 0x80) >> 7;
+ protocol = (gcw[1] & 0xC0) >> 6;
+ drq_type = (gcw[0] & 0x60) >> 5;
+ packet_size = gcw[0] & 0x03;
+
#ifdef CONFIG_PPC
/* kludge for Apple PowerBook internal zip */
- if ((gcw.device_type == 5) &&
- !strstr(id->model, "CD-ROM") &&
- strstr(id->model, "ZIP"))
- gcw.device_type = 0;
+ if ((device_type == 5) &&
+ trstr(id->model, "CD-ROM") &&
+ strstr(id->model, "ZIP"))
+ device_type = 0;
#endif
- if (gcw.protocol != 2)
+ if (protocol != 2)
printk(KERN_ERR "ide-floppy: Protocol (0x%02x) is not ATAPI\n",
- gcw.protocol);
- else if (gcw.device_type != 0)
+ protocol);
+ else if (device_type != 0)
printk(KERN_ERR "ide-floppy: Device type (0x%02x) is not set "
- "to floppy\n", gcw.device_type);
- else if (!gcw.removable)
- printk(KERN_ERR "ide-floppy: The removable flag is not set\n");
- else if (gcw.drq_type == 3) {
+ "to floppy\n", device_type);
+ else if (!removable)
+ printk(KERN_ERR "ide-floppy: The removable flag (0x%02x) is not"
+ " set\n", removable);
+ else if (drq_type == 3) {
printk(KERN_ERR "ide-floppy: Sorry, DRQ type (0x%02x) not "
- "supported\n", gcw.drq_type);
- } else if (gcw.packet_size != 0) {
+ "supported\n", drq_type);
+ } else if (packet_size != 0) {
printk(KERN_ERR "ide-floppy: Packet size (0x%02x) is not 12 "
- "bytes long\n", gcw.packet_size);
+ "bytes\n", packet_size);
} else
return 1;
return 0;
@@ -1322,11 +1304,12 @@ static inline void idefloppy_add_settings(ide_drive_t *drive) { ; }
static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
{
- struct idefloppy_id_gcw gcw;
+ u8 gcw[2];
*((u16 *) &gcw) = drive->id->config;
floppy->pc = floppy->pc_stack;
- if (gcw.drq_type == 1)
+
+ if (((gcw[0] & 0x60) >> 5) == 1)
floppy->flags |= IDEFLOPPY_FLAG_DRQ_INTERRUPT;
/*
* We used to check revisions here. At this point however I'm giving up.
--
Regards/Gruß,
Boris.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists