Linux version 2.6.25-rc1 (mafra@Pilar) (gcc version 4.2.2 20070909 (prerelease) (4.2.2-0.RC.1mdv2008.0)) #19 SMP Mon Feb 11 09:30:23 BRST 2008 Command line: BOOT_IMAGE=2.6.25-rc1 root=/dev/sda6 resume=/dev/sda8 splash=silent vga=0x0364 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) BIOS-e820: 000000007f6d0000 - 000000007f6e0000 (ACPI data) BIOS-e820: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS) BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 521936) 1 entries of 256 used end_pfn_map = 1048576 DMI present. ACPI: RSDP 000F8060, 0024 (r2 PTLTD ) ACPI: XSDT 7F6D7E0E, 008C (r1 Sony VAIO 20070704 PTL 0) ACPI: FACP 7F6DFC04, 00F4 (r3 Sony VAIO 20070704 PTL 1) ACPI: DSDT 7F6D9217, 6979 (r2 Sony VAIO 20070704 PTL 20050624) ACPI: FACS 7F6E2FC0, 0040 ACPI: APIC 7F6DFCF8, 0068 (r1 Sony VAIO 20070704 PTL 5A) ACPI: HPET 7F6DFD60, 0038 (r1 Sony VAIO 20070704 PTL 5A) ACPI: MCFG 7F6DFD98, 003C (r1 Sony VAIO 20070704 PTL 5A) ACPI: SLIC 7F6DFDD4, 0176 (r1 Sony VAIO 20070704 PTL 1000000) ACPI: TMOR 7F6DFF4A, 0026 (r1 Sony VAIO 20070704 PTL 3) ACPI: APIC 7F6DFF70, 0068 (r1 Sony VAIO 20070704 PTL 0) ACPI: BOOT 7F6DFFD8, 0028 (r1 Sony VAIO 20070704 PTL 1) ACPI: SSDT 7F6D90FA, 011D (r1 Sony VAIO 20070704 PTL 20050624) ACPI: SSDT 7F6D8FD7, 0123 (r1 Sony VAIO 20070704 PTL 20050624) ACPI: SSDT 7F6D8482, 0287 (r1 Sony VAIO 20070704 PTL 20050624) ACPI: SSDT 7F6D83CE, 00B4 (r1 Sony VAIO 20070704 PTL 20050624) ACPI: SSDT 7F6D7E9A, 0534 (r1 Sony VAIO 20070704 PTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: DMI detected: Sony Entering add_active_range(0, 0, 159) 0 entries of 256 used Entering add_active_range(0, 256, 521936) 1 entries of 256 used early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-65f4cf] TEXT DATA BSS early res: 3 [37f82000-37fef0c9] RAMDISK early res: 4 [9f800-a07ff] EBDA early res: 5 [8000-bfff] PGTABLE [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 521936 On node 0 totalpages: 521839 DMA zone: 56 pages used for memmap DMA zone: 1129 pages reserved DMA zone: 2814 pages, LIFO batch:0 DMA32 zone: 7079 pages used for memmap DMA32 zone: 510761 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 32736 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513575 Kernel command line: BOOT_IMAGE=2.6.25-rc1 root=/dev/sda6 resume=/dev/sda8 splash=silent vga=0x0364 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER time.c: Detected 1994.983 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock:failed|failed| ok |failed|failed|failed| A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| double unlock:failed|failed|failed|failed|failed|failed| initialize held:failed|failed|failed|failed|failed|failed| bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | |failed| recursive read-lock #2: | ok | |failed| mixed read-write-lock: |failed| |failed| mixed write-read-lock: |failed| |failed| -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12:failed|failed| ok | soft-irqs-on + irq-safe-A/12:failed|failed| ok | hard-irqs-on + irq-safe-A/21:failed|failed| ok | soft-irqs-on + irq-safe-A/21:failed|failed| ok | sirq-safe-A => hirqs-on/12:failed|failed| ok | sirq-safe-A => hirqs-on/21:failed|failed| ok | hard-safe-A + irqs-on/12:failed|failed| ok | soft-safe-A + irqs-on/12:failed|failed| ok | hard-safe-A + irqs-on/21:failed|failed| ok | soft-safe-A + irqs-on/21:failed|failed| ok | hard-safe-A + unsafe-B #1/123:failed|failed| ok | soft-safe-A + unsafe-B #1/123:failed|failed| ok | hard-safe-A + unsafe-B #1/132:failed|failed| ok | soft-safe-A + unsafe-B #1/132:failed|failed| ok | hard-safe-A + unsafe-B #1/213:failed|failed| ok | soft-safe-A + unsafe-B #1/213:failed|failed| ok | hard-safe-A + unsafe-B #1/231:failed|failed| ok | soft-safe-A + unsafe-B #1/231:failed|failed| ok | hard-safe-A + unsafe-B #1/312:failed|failed| ok | soft-safe-A + unsafe-B #1/312:failed|failed| ok | hard-safe-A + unsafe-B #1/321:failed|failed| ok | soft-safe-A + unsafe-B #1/321:failed|failed| ok | hard-safe-A + unsafe-B #2/123:failed|failed| ok | soft-safe-A + unsafe-B #2/123:failed|failed| ok | hard-safe-A + unsafe-B #2/132:failed|failed| ok | soft-safe-A + unsafe-B #2/132:failed|failed| ok | hard-safe-A + unsafe-B #2/213:failed|failed| ok | soft-safe-A + unsafe-B #2/213:failed|failed| ok | hard-safe-A + unsafe-B #2/231:failed|failed| ok | soft-safe-A + unsafe-B #2/231:failed|failed| ok | hard-safe-A + unsafe-B #2/312:failed|failed| ok | soft-safe-A + unsafe-B #2/312:failed|failed| ok | hard-safe-A + unsafe-B #2/321:failed|failed| ok | soft-safe-A + unsafe-B #2/321:failed|failed| ok | hard-irq lock-inversion/123:failed|failed| ok | soft-irq lock-inversion/123:failed|failed| ok | hard-irq lock-inversion/132:failed|failed| ok | soft-irq lock-inversion/132:failed|failed| ok | hard-irq lock-inversion/213:failed|failed| ok | soft-irq lock-inversion/213:failed|failed| ok | hard-irq lock-inversion/231:failed|failed| ok | soft-irq lock-inversion/231:failed|failed| ok | hard-irq lock-inversion/312:failed|failed| ok | soft-irq lock-inversion/312:failed|failed| ok | hard-irq lock-inversion/321:failed|failed| ok | soft-irq lock-inversion/321:failed|failed| ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | -------------------------------------------------------- 145 out of 218 testcases failed, as expected. | ---------------------------------------------------- Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 2049776k/2087744k available (2441k kernel code, 36936k reserved, 1182k data, 244k init) CPA: page pool initialized 32 of 32 pages preallocated hpet clockevent registered Calibrating delay using timer specific routine.. 3994.42 BogoMIPS (lpj=7988852) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 12468662 Detected 12.468 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3989.99 BogoMIPS (lpj=7979984) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 3 groups: 1 2 CPU1 attaching sched-domain: domain 0: span 3 groups: 2 1 net_namespace: 304 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11 hpet0: 3 64-bit timers, 14318180 Hz Time: tsc clocksource has been installed. system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved system 00:06: ioport range 0x680-0x69f has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0x1000-0x107f has been reserved system 00:06: ioport range 0x1180-0x11bf has been reserved system 00:06: ioport range 0x1640-0x164f has been reserved system 00:06: ioport range 0xfe00-0xfe7f has been reserved system 00:06: ioport range 0xfe80-0xfeff has been reserved PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: 0xf6000000-0xf7ffffff PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: 0xf8000000-0xf9ffffff PREFETCH window: 0x00000000f2000000-0x00000000f3ffffff PCI: Bridge: 0000:00:1c.2 IO window: 4000-4fff MEM window: 0xfa000000-0xfbffffff PREFETCH window: 0x00000000f4000000-0x00000000f5ffffff PCI: Bridge: 0000:00:1c.4 IO window: 5000-5fff MEM window: 0xfc200000-0xfc2fffff PREFETCH window: disabled. PCI: Bus 10, cardbus bridge: 0000:09:03.0 IO window: 0x00001400-0x000014ff IO window: 0x00006000-0x000060ff PREFETCH window: 0x8c000000-0x8fffffff MEM window: 0x90000000-0x93ffffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: 0xfc300000-0xfc3fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:09:03.0[A] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 436k freed Simple Boot Flag at 0x36 set to 0x1 io scheduler noop registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 4000k, total 7616k vesafb: mode is 1280x800x16, linelength=2560, pages=2 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 160x50 fb0: VESA VGA frame buffer device ACPI: AC Adapter [ADP1] (on-line) Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 ACPI: Battery Slot [BAT0] (battery present) input: Lid Switch as /class/input/input0 ACPI: Lid Switch [LID0] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: SSDT 7F6D8C52, 02A1 (r1 Sony VAIO 20070704 PTL 20050624) ACPI: SSDT 7F6D8709, 04B7 (r1 Sony VAIO 20070704 PTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7F6D8EF3, 00E4 (r1 Sony VAIO 20070704 PTL 20050624) ACPI: SSDT 7F6D8BC0, 0092 (r1 Sony VAIO 20070704 PTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (55 C) ACPI: LNXTHERM:02 is registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (55 C) hpet_resources: 0xfed00000 is busy Generic RTC Driver v1.07 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled brd: module loaded sony-laptop: Sony Notebook Control Driver v0.6. input: Sony Vaio Keys as /class/input/input2 input: Sony Vaio Jogdial as /class/input/input3 sony-laptop: detected Sony Vaio FZ Series PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input4 input: PS/2 Mouse as /class/input/input5 input: AlpsPS/2 ALPS GlidePoint as /class/input/input6 cpuidle: using governor ladder cpuidle: using governor menu Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC). Marking TSC unstable due to TSC halts in idle Time: hpet clocksource has been installed. ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 15 BIOS EDD facility v0.16 2004-Jun-25, 6 devices found Freeing unused kernel memory: 244k freed SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part Clocksource tsc unstable (delta = -1013352280 ns) PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfc604000 port 0xfc604100 irq 19 ata2: DUMMY ata3: DUMMY ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: FUJITSU MHX2250BT, 0041000B, max UDMA/100 ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHX2250B 0041 PQ: 0 ANSI: 5 ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata4.00: ATAPI: SONY DVD RW AW-G540A, 1.W0, max UDMA/33 ata4.00: configured for UDMA/33 scsi 3:0:0:0: CD-ROM SONY DVD RW AW-G540A 1.W0 PQ: 0 ANSI: 5 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 3:0:0:0: Attached scsi generic sg1 type 5 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 agpgart: Detected an Intel 965GM Chipset. agpgart: Detected 7676K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 ACPI: PCI Interrupt 0000:09:03.1[B] -> GSI 17 (level, low) -> IRQ 17 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fc302000-fc3027ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:08:00.0 to 64 sky2 0000:08:00.0: v1.21 addr 0xfc200000 irq 16 Yukon-FE (0xb7) rev 1 sky2 eth0: addr 00:1a:80:4a:7f:37 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc604800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected USB Universal Host Controller Interface driver v3.0 iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23k iwl4965: Copyright(c) 2003-2007 Intel Corporation usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25-rc1 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc604c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.25-rc1 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.25-rc1 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-2: new high speed USB device using ehci_hcd and address 2 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.25-rc1 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 1-2: configuration #1 chosen from 1 choice usb 1-2: New USB device found, idVendor=05ca, idProduct=183b usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.25-rc1 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.25-rc1 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.25-rc1 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:06:00.0 to 64 iwl4965: Detected Intel Wireless WiFi Link 4965AGN ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels phy0: Selected rate control algorithm 'iwl-4965-rs' ACPI: PCI interrupt for device 0000:06:00.0 disabled ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302903fd0] Non-volatile memory driver v1.2 ACPI: PCI Interrupt 0000:09:03.2[C] -> GSI 18 (level, low) -> IRQ 18 ACPI: device:08 is registered as cooling_device2 input: Video Bus as /class/input/input7 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. EXT3 FS on sda6, internal journal Adding 4281280k swap on /dev/sda8. Priority:-1 extents:1 across:4281280k kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. loop: module loaded Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NET: Registered protocol family 17 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PM: Writing back config space on device 0000:06:00.0 at offset 1 (was 40100102, writing 40100106) wlan0: Initial auth_alg=0 wlan0: authenticate with AP 00:19:5b:dc:82:ba wlan0: RX authentication from 00:19:5b:dc:82:ba (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP 00:19:5b:dc:82:ba wlan0: RX AssocResp from 00:19:5b:dc:82:ba (capab=0x431 status=0 aid=2) wlan0: associated [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0