linux-kernel - Re: [PATCH]intel-iommu batched iotlb flushes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20080212153700.GB27490@linux.intel.com>
Date:	Tue, 12 Feb 2008 07:37:00 -0800
From:	mark gross <mgross@...ux.intel.com>
To:	Muli Ben-Yehuda <muli@...ibm.com>
Cc:	Andrew Morton <akpm@...ux-foundation.org>,
	linux-kernel@...r.kernel.org, linux-mm@...ck.org
Subject: Re: [PATCH]intel-iommu batched iotlb flushes

On Tue, Feb 12, 2008 at 10:52:56AM +0200, Muli Ben-Yehuda wrote:
> On Mon, Feb 11, 2008 at 02:41:05PM -0800, mark gross wrote:
> 
> > The intel-iommu hardware requires a polling operation to flush IOTLB
> > PTE's after an unmap operation.  Through some TSC instrumentation of
> > a netperf UDP stream with small packets test case it was seen that
> > the flush operations where sucking up to 16% of the CPU time doing
> > iommu_flush_iotlb's
> > 
> > The following patch batches the IOTLB flushes removing most of the
> > overhead in flushing the IOTLB's.  It works by building a list of to
> > be released IOVA's that is iterated over when a timer goes off or
> > when a high water mark is reached.
> > 
> > The wrinkle this has is that the memory protection and page fault
> > warnings from errant DMA operations is somewhat reduced, hence a kernel
> > parameter is added to revert back to the "strict" page flush / unmap
> > behavior. 
> > 
> > The hole is the following scenarios: 
> > do many map_signal operations, do some unmap_signals, reuse a recently
> > unmapped page, <errant DMA hardware sneaks through and steps on reused
> > memory>
> > 
> > Or: you have rouge hardware using DMA's to look at pages: do many
> > map_signal's, do many unmap_singles, reuse some unmapped pages : 
> > <rouge hardware looks at reused page>
> > 
> > Note : these holes are very hard to get too, as the IOTLB is small
> > and only the PTE's still in the IOTLB can be accessed through this
> > mechanism.
> > 
> > Its recommended that strict is used when developing drivers that do
> > DMA operations to catch bugs early.  For production code where
> > performance is desired running with the batched IOTLB flushing is a
> > good way to go.
> 
> While I don't disagree with this patch in principle (Calgary does the
> same thing due to expensive IOTLB flushes) the right way to fix it
> IMHO is to fix the drivers to batch mapping and unmapping operations
> or map up-front and unmap when done. The streaming DMA-API was
> designed to conserve IOMMU mappings for machines where IOMMU mappings
> are a scarce resource, and is a poor fit for a modern IOMMU such as
> VT-d with a 64-bit IO address space (or even an IOMMU with a 32-bit
> address space such as Calgary) where there are plenty of IOMMU
> mappings available.

Yes, have a DMA pool of DMA addresses to use and re-use in the stack
instead of setting up and tearing down the PTE's is something we need to
look at closely for network and other high DMA traffic stacks. 

--mgross


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/