linux-kernel - Re: [lm-sensors] [PATCH] hwmon: (adm1026) Properly terminate sysfs groups (Was: panic about sysfs with adm1026)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-id: <47B1C5C0.4010902@verizon.net>
Date:	Tue, 12 Feb 2008 10:13:52 -0600
From:	MillTek <mill.tek@...izon.net>
To:	lm-sensors@...sensors.org
Cc:	Yinghai Lu <yhlu.kernel@...il.com>,
	Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [lm-sensors] [PATCH] hwmon: (adm1026) Properly terminate sysfs
 groups (Was: panic about sysfs with adm1026)

Hi,
Kernel 2.6.24 for my distro (Arch Linux) came out in the last few days. 
My board has a Fintek F1882g chip. It means that I can finally get 
voltage and fan speeds for the board, so thanks for that.  I am 
wondering how I correctly calculate the correct offset and factors for 
the voltage numbers? This is what GKrellm says;

Vcor1  1.66  factor 1 offset 0
Vcor2  1.24  factor 1 offset 0
+3.3v   2.83  factor 3  offset 0
+5v      4.82  factor 4.98 offset 0
+12v    3.84 factor 4.0  offset 0
-12v    -4.35  factor -4.0 offset 0
-5v      -1.51  factor -1.667 offset 0
in7      1.66    factor 1  offset 0
in8       1.54   factor 1 offset 0

If there's a website that I should visit can anyone supply a link??


Jim
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/