| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080213213122.GZ3383@cs181133002.pp.htv.fi>
Date: Wed, 13 Feb 2008 23:31:22 +0200
From: Adrian Bunk <bunk@...nel.org>
To: jejb@...eleye.com
Cc: linux-kernel@...r.kernel.org
Subject: [2.6 patch] remove ps2esdi
The ps2esdi driver was marked as BROKEN more than two years ago due
to being no longer working for some time.
A drivers that had been marked as BROKEN for such a long time seems to
be unlikely to be revived in the forseeable future.
But if anyone wants to ever revive this driver, the code is still
present in the older kernel releases.
Signed-off-by: Adrian Bunk <bunk@...nel.org>
---
This patch has been sent on:
- 1 Jan 2008
- 24 Oct 2007
Documentation/mca.txt | 17
drivers/block/Kconfig | 10
drivers/block/Makefile | 1
drivers/block/ps2esdi.c | 1079 ----------------------------------------
include/linux/Kbuild | 1
include/linux/ps2esdi.h | 98 ---
6 files changed, 5 insertions(+), 1201 deletions(-)
7009ac97a6098c4a638651a69517a7e0671e4875 diff --git a/Documentation/mca.txt b/Documentation/mca.txt
index aabce4a..510375d 100644
--- a/Documentation/mca.txt
+++ b/Documentation/mca.txt
@@ -143,14 +143,7 @@ MCA Device Drivers
Currently, there are a number of MCA-specific device drivers.
-1) PS/2 ESDI
- drivers/block/ps2esdi.c
- include/linux/ps2esdi.h
- Uses major number 36, and should use /dev files /dev/eda, /dev/edb.
- Supports two drives, but only one controller. May use the
- command-line args "ed=cyl,head,sec" and "tp720".
-
-2) PS/2 SCSI
+1) PS/2 SCSI
drivers/scsi/ibmmca.c
drivers/scsi/ibmmca.h
The driver for the IBM SCSI subsystem. Includes both integrated
@@ -159,25 +152,25 @@ Currently, there are a number of MCA-specific device drivers.
machine with a front-panel display (i.e. model 95), you can use
"ibmmcascsi=display" to enable a drive activity indicator.
-3) 3c523
+2) 3c523
drivers/net/3c523.c
drivers/net/3c523.h
3Com 3c523 Etherlink/MC ethernet driver.
-4) SMC Ultra/MCA and IBM Adapter/A
+3) SMC Ultra/MCA and IBM Adapter/A
drivers/net/smc-mca.c
drivers/net/smc-mca.h
Driver for the MCA version of the SMC Ultra and various other
OEM'ed and work-alike cards (Elite, Adapter/A, etc).
-5) NE/2
+4) NE/2
driver/net/ne2.c
driver/net/ne2.h
The NE/2 is the MCA version of the NE2000. This may not work
with clones that have a different adapter id than the original
NE/2.
-6) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Adapter/A and
+5) Future Domain MCS-600/700, OEM'd IBM Fast SCSI Adapter/A and
Reply Sound Blaster/SCSI (SCSI part)
Better support for these cards than the driver for ISA.
Supports multiple cards with IRQ sharing.
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index b6d230b..0d1d213 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -44,16 +44,6 @@ config MAC_FLOPPY
If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple)
floppy controller, say Y here. Most commonly found in PowerMacs.
-config BLK_DEV_PS2
- tristate "PS/2 ESDI hard disk support"
- depends on MCA && MCA_LEGACY && BROKEN
- help
- Say Y here if you have a PS/2 machine with a MCA bus and an ESDI
- hard disk.
-
- To compile this driver as a module, choose M here: the
- module will be called ps2esdi.
-
config AMIGA_Z2RAM
tristate "Amiga Zorro II ramdisk support"
depends on ZORRO
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 01c9724..5e58430 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o
obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
obj-$(CONFIG_BLK_DEV_RAM) += brd.o
obj-$(CONFIG_BLK_DEV_LOOP) += loop.o
-obj-$(CONFIG_BLK_DEV_PS2) += ps2esdi.o
obj-$(CONFIG_BLK_DEV_XD) += xd.o
obj-$(CONFIG_BLK_CPQ_DA) += cpqarray.o
obj-$(CONFIG_BLK_CPQ_CISS_DA) += cciss.o
diff --git a/drivers/block/ps2esdi.c b/drivers/block/ps2esdi.c
deleted file mode 100644
index 3c796e2..0000000
--- a/drivers/block/ps2esdi.c
+++ /dev/null
@@ -1,1079 +0,0 @@
-/* ps2esdi driver based on assembler code by Arindam Banerji,
- written by Peter De Schrijver */
-/* Reassuring note to IBM : This driver was NOT developed by vice-versa
- engineering the PS/2's BIOS */
-/* Dedicated to Wannes, Tofke, Ykke, Godot, Killroy and all those
- other lovely fish out there... */
-/* This code was written during the long and boring WINA
- elections 1994 */
-/* Thanks to Arindam Banerij for giving me the source of his driver */
-/* This code may be freely distributed and modified in any way,
- as long as these notes remain intact */
-
-/* Revised: 05/07/94 by Arindam Banerji (axb@....nd.edu) */
-/* Revised: 09/08/94 by Peter De Schrijver (stud11@....kuleuven.ac.be)
- Thanks to Arindam Banerij for sending me the docs of the adapter */
-
-/* BA Modified for ThinkPad 720 by Boris Ashkinazi */
-/* (bash@...t.ibm.com) 08/08/95 */
-
-/* Modified further for ThinkPad-720C by Uri Blumenthal */
-/* (uri@...son.ibm.com) Sep 11, 1995 */
-
-/* TODO :
- + Timeouts
- + Get disk parameters
- + DMA above 16MB
- + reset after read/write error
- */
-
-#define DEVICE_NAME "PS/2 ESDI"
-
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/genhd.h>
-#include <linux/ps2esdi.h>
-#include <linux/blkdev.h>
-#include <linux/mca-legacy.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/hdreg.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/mca_dma.h>
-#include <asm/uaccess.h>
-
-#define PS2ESDI_IRQ 14
-#define MAX_HD 2
-#define MAX_RETRIES 5
-#define MAX_16BIT 65536
-#define ESDI_TIMEOUT 0xf000
-#define ESDI_STAT_TIMEOUT 4
-
-#define TYPE_0_CMD_BLK_LENGTH 2
-#define TYPE_1_CMD_BLK_LENGTH 4
-
-static void reset_ctrl(void);
-
-static int ps2esdi_geninit(void);
-
-static void do_ps2esdi_request(struct request_queue * q);
-
-static void ps2esdi_readwrite(int cmd, struct request *req);
-
-static void ps2esdi_fill_cmd_block(u_short * cmd_blk, u_short cmd,
-u_short cyl, u_short head, u_short sector, u_short length, u_char drive);
-
-static int ps2esdi_out_cmd_blk(u_short * cmd_blk);
-
-static void ps2esdi_prep_dma(char *buffer, u_short length, u_char dma_xmode);
-
-static irqreturn_t ps2esdi_interrupt_handler(int irq, void *dev_id);
-static void (*current_int_handler) (u_int) = NULL;
-static void ps2esdi_normal_interrupt_handler(u_int);
-static void ps2esdi_initial_reset_int_handler(u_int);
-static void ps2esdi_geometry_int_handler(u_int);
-static int ps2esdi_getgeo(struct block_device *bdev, struct hd_geometry *geo);
-
-static int ps2esdi_read_status_words(int num_words, int max_words, u_short * buffer);
-
-static void dump_cmd_complete_status(u_int int_ret_code);
-
-static void ps2esdi_get_device_cfg(void);
-
-static void ps2esdi_reset_timer(unsigned long unused);
-
-static u_int dma_arb_level; /* DMA arbitration level */
-
-static DECLARE_WAIT_QUEUE_HEAD(ps2esdi_int);
-
-static int no_int_yet;
-static int ps2esdi_drives;
-static u_short io_base;
-static DEFINE_TIMER(esdi_timer, ps2esdi_reset_timer, 0, 0);
-static int reset_status;
-static int ps2esdi_slot = -1;
-static int tp720esdi = 0; /* Is it Integrated ESDI of ThinkPad-720? */
-static int intg_esdi = 0; /* If integrated adapter */
-struct ps2esdi_i_struct {
- unsigned int head, sect, cyl, wpcom, lzone, ctl;
-};
-static DEFINE_SPINLOCK(ps2esdi_lock);
-static struct request_queue *ps2esdi_queue;
-static struct request *current_req;
-
-#if 0
-#if 0 /* try both - I don't know which one is better... UB */
-static struct ps2esdi_i_struct ps2esdi_info[MAX_HD] =
-{
- {4, 48, 1553, 0, 0, 0},
- {0, 0, 0, 0, 0, 0}};
-#else
-static struct ps2esdi_i_struct ps2esdi_info[MAX_HD] =
-{
- {64, 32, 161, 0, 0, 0},
- {0, 0, 0, 0, 0, 0}};
-#endif
-#endif
-static struct ps2esdi_i_struct ps2esdi_info[MAX_HD] =
-{
- {0, 0, 0, 0, 0, 0},
- {0, 0, 0, 0, 0, 0}};
-
-static struct block_device_operations ps2esdi_fops =
-{
- .owner = THIS_MODULE,
- .getgeo = ps2esdi_getgeo,
-};
-
-static struct gendisk *ps2esdi_gendisk[2];
-
-/* initialization routine called by ll_rw_blk.c */
-static int __init ps2esdi_init(void)
-{
-
- int error = 0;
-
- /* register the device - pass the name and major number */
- if (register_blkdev(PS2ESDI_MAJOR, "ed"))
- return -EBUSY;
-
- /* set up some global information - indicating device specific info */
- ps2esdi_queue = blk_init_queue(do_ps2esdi_request, &ps2esdi_lock);
- if (!ps2esdi_queue) {
- unregister_blkdev(PS2ESDI_MAJOR, "ed");
- return -ENOMEM;
- }
-
- /* some minor housekeeping - setup the global gendisk structure */
- error = ps2esdi_geninit();
- if (error) {
- printk(KERN_WARNING "PS2ESDI: error initialising"
- " device, releasing resources\n");
- unregister_blkdev(PS2ESDI_MAJOR, "ed");
- blk_cleanup_queue(ps2esdi_queue);
- return error;
- }
- return 0;
-} /* ps2esdi_init */
-
-#ifndef MODULE
-
-module_init(ps2esdi_init);
-
-#else
-
-static int cyl[MAX_HD] = {-1,-1};
-static int head[MAX_HD] = {-1, -1};
-static int sect[MAX_HD] = {-1, -1};
-
-module_param(tp720esdi, bool, 0);
-module_param_array(cyl, int, NULL, 0);
-module_param_array(head, int, NULL, 0);
-module_param_array(sect, int, NULL, 0);
-MODULE_LICENSE("GPL");
-
-int init_module(void) {
- int drive;
-
- for(drive = 0; drive < MAX_HD; drive++) {
- struct ps2esdi_i_struct *info = &ps2esdi_info[drive];
-
- if (cyl[drive] != -1) {
- info->cyl = info->lzone = cyl[drive];
- info->wpcom = 0;
- }
- if (head[drive] != -1) {
- info->head = head[drive];
- info->ctl = (head[drive] > 8 ? 8 : 0);
- }
- if (sect[drive] != -1) info->sect = sect[drive];
- }
- return ps2esdi_init();
-}
-
-void
-cleanup_module(void) {
- int i;
- if(ps2esdi_slot) {
- mca_mark_as_unused(ps2esdi_slot);
- mca_set_adapter_procfn(ps2esdi_slot, NULL, NULL);
- }
- release_region(io_base, 4);
- free_dma(dma_arb_level);
- free_irq(PS2ESDI_IRQ, &ps2esdi_gendisk);
- unregister_blkdev(PS2ESDI_MAJOR, "ed");
- blk_cleanup_queue(ps2esdi_queue);
- for (i = 0; i < ps2esdi_drives; i++) {
- del_gendisk(ps2esdi_gendisk[i]);
- put_disk(ps2esdi_gendisk[i]);
- }
-}
-#endif /* MODULE */
-
-/* handles boot time command line parameters */
-void __init tp720_setup(char *str, int *ints)
-{
- /* no params, just sets the tp720esdi flag if it exists */
-
- printk("%s: TP 720 ESDI flag set\n", DEVICE_NAME);
- tp720esdi = 1;
-}
-
-void __init ed_setup(char *str, int *ints)
-{
- int hdind = 0;
-
- /* handles 3 parameters only - corresponding to
- 1. Number of cylinders
- 2. Number of heads
- 3. Sectors/track
- */
-
- if (ints[0] != 3)
- return;
-
- /* print out the information - seen at boot time */
- printk("%s: ints[0]=%d ints[1]=%d ints[2]=%d ints[3]=%d\n",
- DEVICE_NAME, ints[0], ints[1], ints[2], ints[3]);
-
- /* set the index into device specific information table */
- if (ps2esdi_info[0].head != 0)
- hdind = 1;
-
- /* set up all the device information */
- ps2esdi_info[hdind].head = ints[2];
- ps2esdi_info[hdind].sect = ints[3];
- ps2esdi_info[hdind].cyl = ints[1];
- ps2esdi_info[hdind].wpcom = 0;
- ps2esdi_info[hdind].lzone = ints[1];
- ps2esdi_info[hdind].ctl = (ints[2] > 8 ? 8 : 0);
-#if 0 /* this may be needed for PS2/Mod.80, but it hurts ThinkPad! */
- ps2esdi_drives = hdind + 1; /* increment index for the next time */
-#endif
-} /* ed_setup */
-
-static int ps2esdi_getinfo(char *buf, int slot, void *d)
-{
- int len = 0;
-
- len += sprintf(buf + len, "DMA Arbitration Level: %d\n",
- dma_arb_level);
- len += sprintf(buf + len, "IO Port: %x\n", io_base);
- len += sprintf(buf + len, "IRQ: 14\n");
- len += sprintf(buf + len, "Drives: %d\n", ps2esdi_drives);
-
- return len;
-}
-
-/* ps2 esdi specific initialization - called thru the gendisk chain */
-static int __init ps2esdi_geninit(void)
-{
- /*
- The first part contains the initialization code
- for the ESDI disk subsystem. All we really do
- is search for the POS registers of the controller
- to do some simple setup operations. First, we
- must ensure that the controller is installed,
- enabled, and configured as PRIMARY. Then we must
- determine the DMA arbitration level being used by
- the controller so we can handle data transfer
- operations properly. If all of this works, then
- we will set the INIT_FLAG to a non-zero value.
- */
-
- int slot = 0, i, reset_start, reset_end;
- u_char status;
- unsigned short adapterID;
- int error = 0;
-
- if ((slot = mca_find_adapter(INTG_ESDI_ID, 0)) != MCA_NOTFOUND) {
- adapterID = INTG_ESDI_ID;
- printk("%s: integrated ESDI adapter found in slot %d\n",
- DEVICE_NAME, slot+1);
-#ifndef MODULE
- mca_set_adapter_name(slot, "PS/2 Integrated ESDI");
-#endif
- } else if ((slot = mca_find_adapter(NRML_ESDI_ID, 0)) != -1) {
- adapterID = NRML_ESDI_ID;
- printk("%s: normal ESDI adapter found in slot %d\n",
- DEVICE_NAME, slot+1);
- mca_set_adapter_name(slot, "PS/2 ESDI");
- } else {
- return -ENODEV;
- }
-
- ps2esdi_slot = slot;
- mca_mark_as_used(slot);
- mca_set_adapter_procfn(slot, (MCA_ProcFn) ps2esdi_getinfo, NULL);
-
- /* Found the slot - read the POS register 2 to get the necessary
- configuration and status information. POS register 2 has the
- following information :
- Bit Function
- 7 reserved = 0
- 6 arbitration method
- 0 - fairness enabled
- 1 - fairness disabled, linear priority assignment
- 5-2 arbitration level
- 1 alternate address
- 1 alternate address
- 0 - use addresses 0x3510 - 0x3517
- 0 adapter enable
- */
-
- status = mca_read_stored_pos(slot, 2);
- /* is it enabled ? */
- if (!(status & STATUS_ENABLED)) {
- printk("%s: ESDI adapter disabled\n", DEVICE_NAME);
- error = -ENODEV;
- goto err_out1;
- }
- /* try to grab IRQ, and try to grab a slow IRQ if it fails, so we can
- share with the SCSI driver */
- if (request_irq(PS2ESDI_IRQ, ps2esdi_interrupt_handler,
- IRQF_DISABLED | IRQF_SHARED, "PS/2 ESDI", &ps2esdi_gendisk)
- && request_irq(PS2ESDI_IRQ, ps2esdi_interrupt_handler,
- IRQF_SHARED, "PS/2 ESDI", &ps2esdi_gendisk)
- ) {
- printk("%s: Unable to get IRQ %d\n", DEVICE_NAME, PS2ESDI_IRQ);
- error = -EBUSY;
- goto err_out1;
- }
- if (status & STATUS_ALTERNATE)
- io_base = ALT_IO_BASE;
- else
- io_base = PRIMARY_IO_BASE;
-
- if (!request_region(io_base, 4, "ed")) {
- printk(KERN_WARNING"Unable to request region 0x%x\n", io_base);
- error = -EBUSY;
- goto err_out2;
- }
- /* get the dma arbitration level */
- dma_arb_level = (status >> 2) & 0xf;
-
- /* BA */
- printk("%s: DMA arbitration level : %d\n",
- DEVICE_NAME, dma_arb_level);
-
- LITE_ON;
- current_int_handler = ps2esdi_initial_reset_int_handler;
- reset_ctrl();
- reset_status = 0;
- reset_start = jiffies;
- while (!reset_status) {
- init_timer(&esdi_timer);
- esdi_timer.expires = jiffies + HZ;
- esdi_timer.data = 0;
- add_timer(&esdi_timer);
- sleep_on(&ps2esdi_int);
- }
- reset_end = jiffies;
- LITE_OFF;
- printk("%s: reset interrupt after %d jiffies, %u.%02u secs\n",
- DEVICE_NAME, reset_end - reset_start, (reset_end - reset_start) / HZ,
- (reset_end - reset_start) % HZ);
-
-
- /* Integrated ESDI Disk and Controller has only one drive! */
- if (adapterID == INTG_ESDI_ID) {/* if not "normal" PS2 ESDI adapter */
- ps2esdi_drives = 1; /* then we have only one physical disk! */ intg_esdi = 1;
- }
-
-
-
- /* finally this part sets up some global data structures etc. */
-
- ps2esdi_get_device_cfg();
-
- /* some annoyance in the above routine returns TWO drives?
- Is something else happining in the background?
- Regaurdless we fix the # of drives again. AJK */
- /* Integrated ESDI Disk and Controller has only one drive! */
- if (adapterID == INTG_ESDI_ID) /* if not "normal" PS2 ESDI adapter */
- ps2esdi_drives = 1; /* Not three or two, ONE DAMNIT! */
-
- current_int_handler = ps2esdi_normal_interrupt_handler;
-
- if (request_dma(dma_arb_level, "ed") !=0) {
- printk(KERN_WARNING "PS2ESDI: Can't request dma-channel %d\n"
- ,(int) dma_arb_level);
- error = -EBUSY;
- goto err_out3;
- }
- blk_queue_max_sectors(ps2esdi_queue, 128);
-
- error = -ENOMEM;
- for (i = 0; i < ps2esdi_drives; i++) {
- struct gendisk *disk = alloc_disk(64);
- if (!disk)
- goto err_out4;
- disk->major = PS2ESDI_MAJOR;
- disk->first_minor = i<<6;
- sprintf(disk->disk_name, "ed%c", 'a'+i);
- disk->fops = &ps2esdi_fops;
- ps2esdi_gendisk[i] = disk;
- }
-
- for (i = 0; i < ps2esdi_drives; i++) {
- struct gendisk *disk = ps2esdi_gendisk[i];
- set_capacity(disk, ps2esdi_info[i].head * ps2esdi_info[i].sect *
- ps2esdi_info[i].cyl);
- disk->queue = ps2esdi_queue;
- disk->private_data = &ps2esdi_info[i];
- add_disk(disk);
- }
- return 0;
-err_out4:
- while (i--)
- put_disk(ps2esdi_gendisk[i]);
-err_out3:
- release_region(io_base, 4);
-err_out2:
- free_irq(PS2ESDI_IRQ, &ps2esdi_gendisk);
-err_out1:
- if(ps2esdi_slot) {
- mca_mark_as_unused(ps2esdi_slot);
- mca_set_adapter_procfn(ps2esdi_slot, NULL, NULL);
- }
- return error;
-}
-
-static void __init ps2esdi_get_device_cfg(void)
-{
- u_short cmd_blk[TYPE_0_CMD_BLK_LENGTH];
-
- /*BA */ printk("%s: Drive 0\n", DEVICE_NAME);
- current_int_handler = ps2esdi_geometry_int_handler;
- cmd_blk[0] = CMD_GET_DEV_CONFIG | 0x600;
- cmd_blk[1] = 0;
- no_int_yet = TRUE;
- ps2esdi_out_cmd_blk(cmd_blk);
- if (no_int_yet)
- sleep_on(&ps2esdi_int);
-
- if (ps2esdi_drives > 1) {
- printk("%s: Drive 1\n", DEVICE_NAME); /*BA */
- cmd_blk[0] = CMD_GET_DEV_CONFIG | (1 << 5) | 0x600;
- cmd_blk[1] = 0;
- no_int_yet = TRUE;
- ps2esdi_out_cmd_blk(cmd_blk);
- if (no_int_yet)
- sleep_on(&ps2esdi_int);
- } /* if second physical drive is present */
- return;
-}
-
-/* strategy routine that handles most of the IO requests */
-static void do_ps2esdi_request(struct request_queue * q)
-{
- struct request *req;
- /* since, this routine is called with interrupts cleared - they
- must be before it finishes */
-
- req = elv_next_request(q);
- if (!req)
- return;
-
-#if 0
- printk("%s:got request. device : %s command : %d sector : %ld count : %ld, buffer: %p\n",
- DEVICE_NAME,
- req->rq_disk->disk_name,
- req->cmd, req->sector,
- req->current_nr_sectors, req->buffer);
-#endif
-
- /* check for above 16Mb dmas */
- if (isa_virt_to_bus(req->buffer + req->current_nr_sectors * 512) > 16 * MB) {
- printk("%s: DMA above 16MB not supported\n", DEVICE_NAME);
- end_request(req, FAIL);
- return;
- }
-
- if (req->sector+req->current_nr_sectors > get_capacity(req->rq_disk)) {
- printk("Grrr. error. ps2esdi_drives: %d, %llu %llu\n",
- ps2esdi_drives, req->sector,
- (unsigned long long)get_capacity(req->rq_disk));
- end_request(req, FAIL);
- return;
- }
-
- switch (rq_data_dir(req)) {
- case READ:
- ps2esdi_readwrite(READ, req);
- break;
- case WRITE:
- ps2esdi_readwrite(WRITE, req);
- break;
- default:
- printk("%s: Unknown command\n", req->rq_disk->disk_name);
- end_request(req, FAIL);
- break;
- } /* handle different commands */
-} /* main strategy routine */
-
-/* resets the ESDI adapter */
-static void reset_ctrl(void)
-{
-
- u_long expire;
- u_short status;
-
- /* enable interrupts on the controller */
- status = inb(ESDI_INTRPT);
- outb((status & 0xe0) | ATT_EOI, ESDI_ATTN); /* to be sure we don't have
- any interrupt pending... */
- outb_p(CTRL_ENABLE_INTR, ESDI_CONTROL);
-
- /* read the ESDI status port - if the controller is not busy,
- simply do a soft reset (fast) - otherwise we'll have to do a
- hard (slow) reset. */
- if (!(inb_p(ESDI_STATUS) & STATUS_BUSY)) {
- /*BA */ printk("%s: soft reset...\n", DEVICE_NAME);
- outb_p(CTRL_SOFT_RESET, ESDI_ATTN);
- }
- /* soft reset */
- else {
- /*BA */
- printk("%s: hard reset...\n", DEVICE_NAME);
- outb_p(CTRL_HARD_RESET, ESDI_CONTROL);
- expire = jiffies + 2*HZ;
- while (time_before(jiffies, expire));
- outb_p(1, ESDI_CONTROL);
- } /* hard reset */
-
-
-} /* reset the controller */
-
-/* called by the strategy routine to handle read and write requests */
-static void ps2esdi_readwrite(int cmd, struct request *req)
-{
- struct ps2esdi_i_struct *p = req->rq_disk->private_data;
- unsigned block = req->sector;
- unsigned count = req->current_nr_sectors;
- int drive = p - ps2esdi_info;
- u_short track, head, cylinder, sector;
- u_short cmd_blk[TYPE_1_CMD_BLK_LENGTH];
-
- /* do some relevant arithmatic */
- track = block / p->sect;
- head = track % p->head;
- cylinder = track / p->head;
- sector = block % p->sect;
-
-#if 0
- printk("%s: cyl=%d head=%d sect=%d\n", DEVICE_NAME, cylinder, head, sector);
-#endif
- /* call the routine that actually fills out a command block */
- ps2esdi_fill_cmd_block
- (cmd_blk,
- (cmd == READ) ? CMD_READ : CMD_WRITE,
- cylinder, head, sector, count, drive);
-
- /* send the command block to the controller */
- current_req = req;
- spin_unlock_irq(&ps2esdi_lock);
- if (ps2esdi_out_cmd_blk(cmd_blk)) {
- spin_lock_irq(&ps2esdi_lock);
- printk("%s: Controller failed\n", DEVICE_NAME);
- if ((++req->errors) >= MAX_RETRIES)
- end_request(req, FAIL);
- }
- /* check for failure to put out the command block */
- else {
- spin_lock_irq(&ps2esdi_lock);
-#if 0
- printk("%s: waiting for xfer\n", DEVICE_NAME);
-#endif
- /* turn disk lights on */
- LITE_ON;
- }
-
-} /* ps2esdi_readwrite */
-
-/* fill out the command block */
-static void ps2esdi_fill_cmd_block(u_short * cmd_blk, u_short cmd,
- u_short cyl, u_short head, u_short sector, u_short length, u_char drive)
-{
-
- cmd_blk[0] = (drive << 5) | cmd;
- cmd_blk[1] = length;
- cmd_blk[2] = ((cyl & 0x1f) << 11) | (head << 5) | sector;
- cmd_blk[3] = (cyl & 0x3E0) >> 5;
-
-} /* fill out the command block */
-
-/* write a command block to the controller */
-static int ps2esdi_out_cmd_blk(u_short * cmd_blk)
-{
-
- int i;
- unsigned long jif;
- u_char status;
-
- /* enable interrupts */
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
-
- /* do not write to the controller, if it is busy */
- for (jif = jiffies + ESDI_STAT_TIMEOUT;
- time_after(jif, jiffies) &&
- (inb(ESDI_STATUS) & STATUS_BUSY); )
- ;
-
-#if 0
- printk("%s: i(1)=%ld\n", DEVICE_NAME, jif);
-#endif
-
- /* if device is still busy - then just time out */
- if (inb(ESDI_STATUS) & STATUS_BUSY) {
- printk("%s: ps2esdi_out_cmd timed out (1)\n", DEVICE_NAME);
- return ERROR;
- } /* timeout ??? */
- /* Set up the attention register in the controller */
- outb(((*cmd_blk) & 0xE0) | 1, ESDI_ATTN);
-
-#if 0
- printk("%s: sending %d words to controller\n", DEVICE_NAME, (((*cmd_blk) >> 14) + 1) << 1);
-#endif
-
- /* one by one send each word out */
- for (i = (((*cmd_blk) >> 14) + 1) << 1; i; i--) {
- status = inb(ESDI_STATUS);
- for (jif = jiffies + ESDI_STAT_TIMEOUT;
- time_after(jif, jiffies) && (status & STATUS_BUSY) &&
- (status & STATUS_CMD_INF); status = inb(ESDI_STATUS));
- if ((status & (STATUS_BUSY | STATUS_CMD_INF)) == STATUS_BUSY) {
-#if 0
- printk("%s: sending %04X\n", DEVICE_NAME, *cmd_blk);
-#endif
- outw(*cmd_blk++, ESDI_CMD_INT);
- } else {
- printk("%s: ps2esdi_out_cmd timed out while sending command (status=%02X)\n",
- DEVICE_NAME, status);
- return ERROR;
- }
- } /* send all words out */
- return OK;
-} /* send out the commands */
-
-
-/* prepare for dma - do all the necessary setup */
-static void ps2esdi_prep_dma(char *buffer, u_short length, u_char dma_xmode)
-{
- unsigned long flags = claim_dma_lock();
-
- mca_disable_dma(dma_arb_level);
-
- mca_set_dma_addr(dma_arb_level, isa_virt_to_bus(buffer));
-
- mca_set_dma_count(dma_arb_level, length * 512 / 2);
-
- mca_set_dma_mode(dma_arb_level, dma_xmode);
-
- mca_enable_dma(dma_arb_level);
-
- release_dma_lock(flags);
-
-} /* prepare for dma */
-
-
-
-static irqreturn_t ps2esdi_interrupt_handler(int irq, void *dev_id)
-{
- u_int int_ret_code;
-
- if (inb(ESDI_STATUS) & STATUS_INTR) {
- int_ret_code = inb(ESDI_INTRPT);
- if (current_int_handler) {
- /* Disable adapter interrupts till processing is finished */
- outb(CTRL_DISABLE_INTR, ESDI_CONTROL);
- current_int_handler(int_ret_code);
- } else
- printk("%s: help ! No interrupt handler.\n", DEVICE_NAME);
- } else {
- return IRQ_NONE;
- }
- return IRQ_HANDLED;
-}
-
-static void ps2esdi_initial_reset_int_handler(u_int int_ret_code)
-{
-
- switch (int_ret_code & 0xf) {
- case INT_RESET:
- /*BA */
- printk("%s: initial reset completed.\n", DEVICE_NAME);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- wake_up(&ps2esdi_int);
- break;
- case INT_ATTN_ERROR:
- printk("%s: Attention error. interrupt status : %02X\n", DEVICE_NAME,
- int_ret_code);
- printk("%s: status: %02x\n", DEVICE_NAME, inb(ESDI_STATUS));
- break;
- default:
- printk("%s: initial reset handler received interrupt: %02X\n",
- DEVICE_NAME, int_ret_code);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- break;
- }
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
-}
-
-
-static void ps2esdi_geometry_int_handler(u_int int_ret_code)
-{
- u_int status, drive_num;
- unsigned long rba;
- int i;
-
- drive_num = int_ret_code >> 5;
- switch (int_ret_code & 0xf) {
- case INT_CMD_COMPLETE:
- for (i = ESDI_TIMEOUT; i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL); i--);
- if (!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) {
- printk("%s: timeout reading status word\n", DEVICE_NAME);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- break;
- }
- status = inw(ESDI_STT_INT);
- if ((status & 0x1F) == CMD_GET_DEV_CONFIG) {
-#define REPLY_WORDS 5 /* we already read word 0 */
- u_short reply[REPLY_WORDS];
-
- if (ps2esdi_read_status_words((status >> 8) - 1, REPLY_WORDS, reply)) {
- /*BA */
- printk("%s: Device Configuration Status for drive %u\n",
- DEVICE_NAME, drive_num);
-
- printk("%s: Spares/cyls: %u", DEVICE_NAME, reply[0] >> 8);
-
- printk
- ("Config bits: %s%s%s%s%s\n",
- (reply[0] & CONFIG_IS) ? "Invalid Secondary, " : "",
- ((reply[0] & CONFIG_ZD) && !(reply[0] & CONFIG_IS))
- ? "Zero Defect, " : "Defects Present, ",
- (reply[0] & CONFIG_SF) ? "Skewed Format, " : "",
- (reply[0] & CONFIG_FR) ? "Removable, " : "Non-Removable, ",
- (reply[0] & CONFIG_RT) ? "No Retries" : "Retries");
-
- rba = reply[1] | ((unsigned long) reply[2] << 16);
- printk("%s: Number of RBA's: %lu\n", DEVICE_NAME, rba);
-
- printk("%s: Physical number of cylinders: %u, Sectors/Track: %u, Heads: %u\n",
- DEVICE_NAME, reply[3], reply[4] >> 8, reply[4] & 0xff);
-
- if (!ps2esdi_info[drive_num].head) {
- ps2esdi_info[drive_num].head = 64;
- ps2esdi_info[drive_num].sect = 32;
- ps2esdi_info[drive_num].cyl = rba / (64 * 32);
- ps2esdi_info[drive_num].wpcom = 0;
- ps2esdi_info[drive_num].lzone = ps2esdi_info[drive_num].cyl;
- ps2esdi_info[drive_num].ctl = 8;
- if (tp720esdi) { /* store the retrieved parameters */
- ps2esdi_info[0].head = reply[4] & 0Xff;
- ps2esdi_info[0].sect = reply[4] >> 8;
- ps2esdi_info[0].cyl = reply[3];
- ps2esdi_info[0].wpcom = 0;
- ps2esdi_info[0].lzone = reply[3];
- } else {
- if (!intg_esdi)
- ps2esdi_drives++;
- }
- }
-#ifdef OBSOLETE
- if (!ps2esdi_info[drive_num].head) {
- ps2esdi_info[drive_num].head = reply[4] & 0Xff;
- ps2esdi_info[drive_num].sect = reply[4] >> 8;
- ps2esdi_info[drive_num].cyl = reply[3];
- ps2esdi_info[drive_num].wpcom = 0;
- ps2esdi_info[drive_num].lzone = reply[3];
- if (tp720esdi) { /* store the retrieved parameters */
- ps2esdi_info[0].head = reply[4] & 0Xff;
- ps2esdi_info[0].sect = reply[4] >> 8;
- ps2esdi_info[0].cyl = reply[3];
- ps2esdi_info[0].wpcom = 0;
- ps2esdi_info[0].lzone = reply[3];
- } else {
- ps2esdi_drives++;
- }
- }
-#endif
-
- } else
- printk("%s: failed while getting device config\n", DEVICE_NAME);
-#undef REPLY_WORDS
- } else
- printk("%s: command %02X unknown by geometry handler\n",
- DEVICE_NAME, status & 0x1f);
-
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- break;
-
- case INT_ATTN_ERROR:
- printk("%s: Attention error. interrupt status : %02X\n", DEVICE_NAME,
- int_ret_code);
- printk("%s: Device not available\n", DEVICE_NAME);
- break;
- case INT_CMD_ECC:
- case INT_CMD_RETRY:
- case INT_CMD_ECC_RETRY:
- case INT_CMD_WARNING:
- case INT_CMD_ABORT:
- case INT_CMD_FAILED:
- case INT_DMA_ERR:
- case INT_CMD_BLK_ERR:
- /*BA */ printk("%s: Whaa. Error occurred...\n", DEVICE_NAME);
- dump_cmd_complete_status(int_ret_code);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- break;
- default:
- printk("%s: Unknown interrupt reason: %02X\n",
- DEVICE_NAME, int_ret_code & 0xf);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- break;
- }
-
- wake_up(&ps2esdi_int);
- no_int_yet = FALSE;
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
-
-}
-
-static void ps2esdi_normal_interrupt_handler(u_int int_ret_code)
-{
- unsigned long flags;
- u_int status;
- u_int ending;
- int i;
-
- switch (int_ret_code & 0x0f) {
- case INT_TRANSFER_REQ:
- ps2esdi_prep_dma(current_req->buffer,
- current_req->current_nr_sectors,
- (rq_data_dir(current_req) == READ)
- ? MCA_DMA_MODE_16 | MCA_DMA_MODE_WRITE | MCA_DMA_MODE_XFER
- : MCA_DMA_MODE_16 | MCA_DMA_MODE_READ);
- outb(CTRL_ENABLE_DMA | CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = -1;
- break;
-
- case INT_ATTN_ERROR:
- printk("%s: Attention error. interrupt status : %02X\n", DEVICE_NAME,
- int_ret_code);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = FAIL;
- break;
-
- case INT_CMD_COMPLETE:
- for (i = ESDI_TIMEOUT; i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL); i--);
- if (!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) {
- printk("%s: timeout reading status word\n", DEVICE_NAME);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- if ((++current_req->errors) >= MAX_RETRIES)
- ending = FAIL;
- else
- ending = -1;
- break;
- }
- status = inw(ESDI_STT_INT);
- switch (status & 0x1F) {
- case (CMD_READ & 0xff):
- case (CMD_WRITE & 0xff):
- LITE_OFF;
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = SUCCES;
- break;
- default:
- printk("%s: interrupt for unknown command %02X\n",
- DEVICE_NAME, status & 0x1f);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = -1;
- break;
- }
- break;
- case INT_CMD_ECC:
- case INT_CMD_RETRY:
- case INT_CMD_ECC_RETRY:
- LITE_OFF;
- dump_cmd_complete_status(int_ret_code);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = SUCCES;
- break;
- case INT_CMD_WARNING:
- case INT_CMD_ABORT:
- case INT_CMD_FAILED:
- case INT_DMA_ERR:
- LITE_OFF;
- dump_cmd_complete_status(int_ret_code);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- if ((++current_req->errors) >= MAX_RETRIES)
- ending = FAIL;
- else
- ending = -1;
- break;
-
- case INT_CMD_BLK_ERR:
- dump_cmd_complete_status(int_ret_code);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = FAIL;
- break;
-
- case INT_CMD_FORMAT:
- printk("%s: huh ? Who issued this format command ?\n"
- ,DEVICE_NAME);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = -1;
- break;
-
- case INT_RESET:
- /* BA printk("%s: reset completed.\n", DEVICE_NAME) */ ;
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = -1;
- break;
-
- default:
- printk("%s: Unknown interrupt reason: %02X\n",
- DEVICE_NAME, int_ret_code & 0xf);
- outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- ending = -1;
- break;
- }
- if(ending != -1) {
- spin_lock_irqsave(&ps2esdi_lock, flags);
- end_request(current_req, ending);
- current_req = NULL;
- do_ps2esdi_request(ps2esdi_queue);
- spin_unlock_irqrestore(&ps2esdi_lock, flags);
- }
-} /* handle interrupts */
-
-
-
-static int ps2esdi_read_status_words(int num_words,
- int max_words,
- u_short * buffer)
-{
- int i;
-
- for (; max_words && num_words; max_words--, num_words--, buffer++) {
- for (i = ESDI_TIMEOUT; i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL); i--);
- if (!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) {
- printk("%s: timeout reading status word\n", DEVICE_NAME);
- return FAIL;
- }
- *buffer = inw(ESDI_STT_INT);
- }
- return SUCCES;
-}
-
-
-
-
-static void dump_cmd_complete_status(u_int int_ret_code)
-{
-#define WAIT_FOR_STATUS \
- for(i=ESDI_TIMEOUT;i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL);i--); \
- if(!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) { \
- printk("%s: timeout reading status word\n",DEVICE_NAME); \
- return; \
- }
-
- int i, word_count;
- u_short stat_word;
- u_long rba;
-
- printk("%s: Device: %u, interrupt ID: %02X\n",
- DEVICE_NAME, int_ret_code >> 5,
- int_ret_code & 0xf);
-
- WAIT_FOR_STATUS;
- stat_word = inw(ESDI_STT_INT);
- word_count = (stat_word >> 8) - 1;
- printk("%s: %u status words, command: %02X\n", DEVICE_NAME, word_count,
- stat_word & 0xff);
-
- if (word_count--) {
- WAIT_FOR_STATUS;
- stat_word = inw(ESDI_STT_INT);
- printk("%s: command status code: %02X, command error code: %02X\n",
- DEVICE_NAME, stat_word >> 8, stat_word & 0xff);
- }
- if (word_count--) {
- WAIT_FOR_STATUS;
- stat_word = inw(ESDI_STT_INT);
- printk("%s: device error code: %s%s%s%s%s,%02X\n", DEVICE_NAME,
- (stat_word & 0x1000) ? "Ready, " : "Not Ready, ",
- (stat_word & 0x0800) ? "Selected, " : "Not Selected, ",
- (stat_word & 0x0400) ? "Write Fault, " : "",
- (stat_word & 0x0200) ? "Track 0, " : "",
- (stat_word & 0x0100) ? "Seek or command complete, " : "",
- stat_word >> 8);
- }
- if (word_count--) {
- WAIT_FOR_STATUS;
- stat_word = inw(ESDI_STT_INT);
- printk("%s: Blocks to do: %u", DEVICE_NAME, stat_word);
- }
- if (word_count -= 2) {
- WAIT_FOR_STATUS;
- rba = inw(ESDI_STT_INT);
- WAIT_FOR_STATUS;
- rba |= inw(ESDI_STT_INT) << 16;
- printk(", Last Cyl: %u Head: %u Sector: %u\n",
- (u_short) ((rba & 0x1ff80000) >> 11),
- (u_short) ((rba & 0x7E0) >> 5), (u_short) (rba & 0x1f));
- } else
- printk("\n");
-
- if (word_count--) {
- WAIT_FOR_STATUS;
- stat_word = inw(ESDI_STT_INT);
- printk("%s: Blocks required ECC: %u", DEVICE_NAME, stat_word);
- }
- printk("\n");
-
-#undef WAIT_FOR_STATUS
-
-}
-
-static int ps2esdi_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
- struct ps2esdi_i_struct *p = bdev->bd_disk->private_data;
-
- geo->heads = p->head;
- geo->sectors = p->sect;
- geo->cylinders = p->cyl;
- return 0;
-}
-
-static void ps2esdi_reset_timer(unsigned long unused)
-{
-
- int status;
-
- status = inb(ESDI_INTRPT);
- if ((status & 0xf) == INT_RESET) {
- outb((status & 0xe0) | ATT_EOI, ESDI_ATTN);
- outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
- reset_status = 1;
- }
- wake_up(&ps2esdi_int);
-}
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 5cae9b5..2fd4b5f 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -127,7 +127,6 @@ header-y += pkt_sched.h
header-y += posix_types.h
header-y += ppdev.h
header-y += prctl.h
-header-y += ps2esdi.h
header-y += qnxtypes.h
header-y += quotaio_v1.h
header-y += quotaio_v2.h
diff --git a/include/linux/ps2esdi.h b/include/linux/ps2esdi.h
deleted file mode 100644
index c0e050b..0000000
--- a/include/linux/ps2esdi.h
+++ /dev/null
@@ -1,98 +0,0 @@
-#ifndef _PS2ESDI_H_
-#define _PS2ESDI_H_
-
-#define NRML_ESDI_ID 0xddff
-#define INTG_ESDI_ID 0xdf9f
-
-#define PRIMARY_IO_BASE 0x3510
-#define ALT_IO_BASE 0x3518
-
-#define ESDI_CMD_INT (io_base+0)
-#define ESDI_STT_INT (io_base+0)
-#define ESDI_CONTROL (io_base+2)
-#define ESDI_STATUS (io_base+2)
-#define ESDI_ATTN (io_base+3)
-#define ESDI_INTRPT (io_base+3)
-
-#define STATUS_ENABLED 0x01
-#define STATUS_ALTERNATE 0x02
-#define STATUS_BUSY 0x10
-#define STATUS_STAT_AVAIL 0x08
-#define STATUS_INTR 0x01
-#define STATUS_RESET_FAIL 0xea
-#define STATUS_CMD_INF 0x04
-
-#define CTRL_SOFT_RESET 0xe4
-#define CTRL_HARD_RESET 0x80
-#define CTRL_EOI 0xe2
-#define CTRL_ENABLE_DMA 0x02
-#define CTRL_ENABLE_INTR 0x01
-#define CTRL_DISABLE_INTR 0x00
-
-#define ATT_EOI 0x02
-
-/* bits of word 0 of configuration status block. more info see p.38 of tech ref */
-#define CONFIG_IS 0x10 /* Invalid Secondary */
-#define CONFIG_ZD 0x08 /* Zero Defect */
-#define CONFIG_SF 0x04 /* Skewed Format */
-#define CONFIG_FR 0x02 /* Removable */
-#define CONFIG_RT 0x01 /* Retries */
-
-#define PORT_SYS_A 0x92
-#define PORT_DMA_FN 0x18
-#define PORT_DMA_EX 0x1a
-
-#define ON (unsigned char)0x40
-#define OFF (unsigned char)~ON
-#define LITE_ON outb(inb(PORT_SYS_A) | ON,PORT_SYS_A)
-#define LITE_OFF outb((inb(PORT_SYS_A) & OFF),PORT_SYS_A)
-
-#define FAIL 0
-#define SUCCES 1
-
-#define INT_CMD_COMPLETE 0x01
-#define INT_CMD_ECC 0x03
-#define INT_CMD_RETRY 0x05
-#define INT_CMD_FORMAT 0x06
-#define INT_CMD_ECC_RETRY 0x07
-#define INT_CMD_WARNING 0x08
-#define INT_CMD_ABORT 0x09
-#define INT_RESET 0x0A
-#define INT_TRANSFER_REQ 0x0B
-#define INT_CMD_FAILED 0x0C
-#define INT_DMA_ERR 0x0D
-#define INT_CMD_BLK_ERR 0x0E
-#define INT_ATTN_ERROR 0x0F
-
-#define DMA_MASK_CHAN 0x90
-#define DMA_UNMASK_CHAN 0xA0
-#define DMA_WRITE_ADDR 0x20
-#define DMA_WRITE_TC 0x40
-#define DMA_WRITE_MODE 0x70
-
-#define CMD_GET_DEV_CONFIG 0x09
-#define CMD_READ 0x4601
-#define CMD_WRITE 0x4602
-#define DMA_READ_16 0x4C
-#define DMA_WRITE_16 0x44
-
-
-#define MB 1024*1024
-#define SECT_SIZE 512
-
-#define ERROR 1
-#define OK 0
-
-#define HDIO_GETGEO 0x0301
-
-#define FALSE 0
-#define TRUE !FALSE
-
-struct ps2esdi_geometry {
- unsigned char heads;
- unsigned char sectors;
- unsigned short cylinders;
- unsigned long start;
-};
-
-#endif /* _PS2ESDI_H_ */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists