Linux version 2.6.23.9-srikar (srikar@llm37.in.ibm.com) (gcc version 4.1.1 20060817 (Red Hat 4.1.1-18)) #4 SMP Fri Jan 25 12:01:10 IST 2008 Command line: ro root=LABEL=/ rhgb console=tty0 console=ttyS0,38400 iommu=calgary crashkernel=128M@16M BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000099c00 (usable) BIOS-e820: 0000000000099c00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cff8dc80 (usable) BIOS-e820: 00000000cff8dc80 - 00000000cff98880 (ACPI data) BIOS-e820: 00000000cff98880 - 00000000d0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000230000000 (usable) Entering add_active_range(0, 0, 153) 0 entries of 3200 used Entering add_active_range(0, 256, 851853) 1 entries of 3200 used Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200 used end_pfn_map = 2293760 DMI 2.3 present. ACPI: RSDP 000FDCF0, 0014 (r0 IBM ) ACPI: RSDT CFF98800, 0034 (r1 IBM EXA01ZEU 1000 IBM 45444F43) ACPI: FACP CFF98780, 0074 (r1 IBM EXA01ZEU 1000 IBM 45444F43) ACPI: DSDT CFF8DC80, 2D9A (r1 IBM SER01ZEU 1000 INTL 20030122) ACPI: FACS CFF98540, 0040 ACPI: APIC CFF98680, 00D2 (r1 IBM EXA01ZEU 1000 IBM 45444F43) ACPI: SRAT CFF98580, 0100 (r1 IBM EXA01ZEU 1000 IBM 45444F43) ACPI: SSDT CFF90A40, 7A56 (r1 IBM VIGSSDT0 1000 INTL 20030122) SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 0 -> APIC 6 -> Node 0 SRAT: PXM 0 -> APIC 7 -> Node 0 SRAT: PXM 0 -> APIC 16 -> Node 0 SRAT: PXM 0 -> APIC 17 -> Node 0 SRAT: PXM 0 -> APIC 22 -> Node 0 SRAT: PXM 0 -> APIC 23 -> Node 0 SRAT: Node 0 PXM 0 0-d0000000 Entering add_active_range(0, 0, 153) 0 entries of 3200 used Entering add_active_range(0, 256, 851853) 1 entries of 3200 used SRAT: Node 0 PXM 0 0-230000000 Entering add_active_range(0, 0, 153) 2 entries of 3200 used Entering add_active_range(0, 256, 851853) 2 entries of 3200 used Entering add_active_range(0, 1048576, 2293760) 2 entries of 3200 used NUMA: Using 63 for the hash shift. Bootmem setup node 0 0000000000000000-0000000230000000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2293760 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 153 0: 256 -> 851853 0: 1048576 -> 2293760 On node 0 totalpages: 2096934 DMA zone: 56 pages used for memmap DMA zone: 1544 pages reserved DMA zone: 2393 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833477 pages, LIFO batch:31 Normal zone: 17024 pages used for memmap Normal zone: 1228160 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x9c ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) Processor #7 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled) Processor #16 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled) Processor #17 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled) Processor #22 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled) Processor #23 ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 15, address 0xfec00000, GSI 0-35 ACPI: IOAPIC (id[0x0e] address[0xfec01000] gsi_base[36]) IOAPIC[1]: apic_id 14, address 0xfec01000, GSI 36-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 8 low edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 low edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ8 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 0000000000099000 - 000000000009a000 swsusp: Registered nosave memory region: 000000000009a000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 swsusp: Registered nosave memory region: 00000000cff8d000 - 00000000cff8e000 swsusp: Registered nosave memory region: 00000000cff8e000 - 00000000cff98000 swsusp: Registered nosave memory region: 00000000cff98000 - 00000000cff99000 swsusp: Registered nosave memory region: 00000000cff99000 - 00000000d0000000 swsusp: Registered nosave memory region: 00000000d0000000 - 00000000fec00000 swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000) SMP: Allowing 8 CPUs, 0 hotplug CPUs PERCPU: Allocating 34792 bytes of per cpu data Built 1 zonelists in Zone order. Total pages: 2064030 Policy zone: Normal Kernel command line: ro root=LABEL=/ rhgb console=tty0 console=ttyS0,38400 iommu=calgary crashkernel=128M@16M Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 3669.795 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: finished detection, Calgary found PCI-DMA: Calgary IOMMU detected. PCI-DMA: Calgary TCE table spec is 7, CONFIG_IOMMU_DEBUG is disabled. Memory: 8106728k/9175040k available (3016k kernel code, 281008k reserved, 1741k data, 336k init) Calibrating delay using timer specific routine.. 7346.75 BogoMIPS (lpj=14693515) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) SMP alternatives: switching to UP code ACPI: Core revision 20070126 ..MP-BIOS bug: 8254 timer not connected to IO-APIC Using local APIC timer interrupts. result 10425395 Detected 10.425 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/8 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 7339.87 BogoMIPS (lpj=14679744) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 01 checking TSC synchronization [CPU#0 -> CPU#1]: passed. SMP alternatives: switching to SMP code Booting processor 2/8 APIC 0x6 Initializing CPU#2 Calibrating delay using timer specific routine.. 7340.06 BogoMIPS (lpj=14680132) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 2/6 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU2: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 09 checking TSC synchronization [CPU#0 -> CPU#2]: passed. SMP alternatives: switching to SMP code Booting processor 3/8 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 7340.12 BogoMIPS (lpj=14680247) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 3/7 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU3: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 09 checking TSC synchronization [CPU#0 -> CPU#3]: passed. SMP alternatives: switching to SMP code Booting processor 4/8 APIC 0x10 Initializing CPU#4 Calibrating delay using timer specific routine.. 7340.14 BogoMIPS (lpj=14680282) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 4/10 -> Node 0 CPU: Physical Processor ID: 8 CPU: Processor Core ID: 0 CPU4: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 09 checking TSC synchronization [CPU#0 -> CPU#4]: passed. SMP alternatives: switching to SMP code Booting processor 5/8 APIC 0x11 Initializing CPU#5 Calibrating delay using timer specific routine.. 7340.09 BogoMIPS (lpj=14680185) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 5/11 -> Node 0 CPU: Physical Processor ID: 8 CPU: Processor Core ID: 0 CPU5: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 09 checking TSC synchronization [CPU#0 -> CPU#5]: passed. SMP alternatives: switching to SMP code Booting processor 6/8 APIC 0x16 Initializing CPU#6 Calibrating delay using timer specific routine.. 7340.09 BogoMIPS (lpj=14680190) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 6/16 -> Node 0 CPU: Physical Processor ID: 11 CPU: Processor Core ID: 0 CPU6: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 09 checking TSC synchronization [CPU#0 -> CPU#6]: passed. SMP alternatives: switching to SMP code Booting processor 7/8 APIC 0x17 Initializing CPU#7 Calibrating delay using timer specific routine.. 7340.06 BogoMIPS (lpj=14680129) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 7/17 -> Node 0 CPU: Physical Processor ID: 11 CPU: Processor Core ID: 0 CPU7: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) MP CPU 3.66GHz stepping 09 checking TSC synchronization [CPU#0 -> CPU#7]: passed. Brought up 8 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [VP00] (0000:00) ACPI: PCI Interrupt Routing Table [\_SB_.VP00._PRT] ACPI: PCI Root Bridge [VP01] (0000:01) ACPI: PCI Interrupt Routing Table [\_SB_.VP01._PRT] ACPI: PCI Root Bridge [VP02] (0000:02) ACPI: PCI Interrupt Routing Table [\_SB_.VP02._PRT] ACPI: PCI Root Bridge [VP03] (0000:04) ACPI: PCI Interrupt Routing Table [\_SB_.VP03._PRT] ACPI: PCI Root Bridge [VP04] (0000:06) ACPI: PCI Interrupt Routing Table [\_SB_.VP04._PRT] ACPI: PCI Root Bridge [VP05] (0000:08) ACPI: PCI Interrupt Routing Table [\_SB_.VP05._PRT] ACPI: PCI Root Bridge [VP06] (0000:0a) ACPI: PCI Interrupt Routing Table [\_SB_.VP06._PRT] ACPI: PCI Root Bridge [VP07] (0000:0c) ACPI: PCI Interrupt Routing Table [\_SB_.VP07._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 20 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 2.21 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-DMA: Using Calgary IOMMU Calgary: enabling translation on Calgary PHB 0x0 Calgary: errant DMAs will now be prevented on this bus. Calgary: enabling translation on Calgary PHB 0x1 Calgary: errant DMAs will now be prevented on this bus. PCI-GART: No AMD northbridge found. Time: tsc clocksource has been installed. pnp: 00:0a: ioport range 0x400-0x47f has been reserved pnp: 00:0a: ioport range 0x480-0x4ff has been reserved pnp: 00:0b: iomem range 0x400-0x4ff could not be reserved NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 1048576 (order: 12, 25165824 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 1048576 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1152k freed Calgary: fixing up tce spaces Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:01.0 input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:04: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded tg3.c:v3.81.1 (October 18, 2007) ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 24 (level, low) -> IRQ 24 eth0: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:14:5e:1c:86:fc eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[0] eth0: dma_rwctrl[769f0000] dma_mask[64-bit] ACPI: PCI Interrupt 0000:01:01.1[B] -> GSI 28 (level, low) -> IRQ 28 eth1: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:14:5e:1c:86:fd eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[769f0000] dma_mask[64-bit] tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, ATAPI CD/DVD-ROM drive Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Adaptec aacraid driver 1.1-5[2449]-ms ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 25 (level, low) -> IRQ 25 AAC0: kernel 5.2-0[11835] Jan 9 2007 AAC0: monitor 5.2-0[11835] AAC0: bios 5.2-0[11835] AAC0: serial 1625D1 AAC0: 64bit support enabled. AAC0: 64 Bit DAC enabled scsi0 : ServeRAID scsi 0:0:0:0: Direct-Access IBM x366 V1.0 PQ: 0 ANSI: 2 scsi 0:1:0:0: Direct-Access IBM-ESXS ST973401SS B519 PQ: 0 ANSI: 5 scsi 0:1:1:0: Direct-Access IBM-ESXS ST973401SS B519 PQ: 0 ANSI: 5 scsi 0:1:2:0: Direct-Access IBM-ESXS ST973401SS B519 PQ: 0 ANSI: 5 scsi 0:3:0:0: Enclosure IBM SAS SES-2 DEVICE 0.09 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 429459456 512-byte hardware sectors (219883 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 0:0:0:0: [sda] 429459456 512-byte hardware sectors (219883 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI removable disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 0:1:0:0: Attached scsi generic sg1 type 0 scsi 0:1:1:0: Attached scsi generic sg2 type 0 scsi 0:1:2:0: Attached scsi generic sg3 type 0 scsi 0:3:0:0: Attached scsi generic sg4 type 13 Fusion MPT base driver 3.04.05 Copyright (c) 1999-2007 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.05 ieee1394: raw1394: /dev/raw1394 device initialized ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:03.2: EHCI Host Controller ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:03.2: irq 20, io mem 0xeb512000 ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:03.0: irq 20, io mem 0xeb510000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-3: new high speed USB device using ehci_hcd and address 2 ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:03.1: irq 20, io mem 0xeb511000 usb 1-3: configuration #1 chosen from 1 choice usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected USB Universal Host Controller Interface driver v3.0 usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com input: Avocent Virtual Media KVM Module as /class/input/input1 input: USB HID v1.10 Keyboard [Avocent Virtual Media KVM Module] on usb-0000:00:03.2-3 input: Avocent Virtual Media KVM Module as /class/input/input2 input: USB HID v1.10 Mouse [Avocent Virtual Media KVM Module] on usb-0000:00:03.2-3 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Freeing unused kernel memory: 336k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. scsi 1:0:0:0: CD-ROM KVM vmDisk-CD 0.01 PQ: 0 ANSI: 0 sr0: scsi3-mmc drive: 0x/0x caddy sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg5 type 5 usb-storage: device scan complete EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 4192956k swap on /dev/sda3. Priority:-1 extents:1 across:4192956k kudzu[2779]: segfault at 0000000000000000 rip 0000003fc9e78c9b rsp 00007fff8d8abfb8 error 4 process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead. ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present