Linux version 2.6.25-rc2-mm1 (laurent@calimero) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #40 PREEMPT Sat Feb 16 21:34:19 CET 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffec000 (usable) BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data) BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. Scan SMP from c009fc00 for 1024 bytes. Entering add_active_range(0, 0, 131052) 0 entries of 256 used sizeof(struct page) = 32 Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 131052 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 131052 On node 0 totalpages: 131052 Node 0 memmap at 0xc1000000 size 4194304 first pfn 0xc1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 991 pages used for memmap Normal zone: 125965 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000F6A80, 0014 (r0 ASUS ) ACPI: RSDT 1FFEC000, 002C (r1 ASUS A7V133-C 30303031 MSFT 31313031) ACPI: FACP 1FFEC080, 0074 (r1 ASUS A7V133-C 30303031 MSFT 31313031) ACPI: DSDT 1FFEC100, 2CE1 (r1 ASUS A7V133-C 1000 MSFT 100000B) ACPI: FACS 1FFFF000, 0040 ACPI: BOOT 1FFEC040, 0028 (r1 ASUS A7V133-C 30303031 MSFT 31313031) ACPI: PM-Timer IO Port: 0xe408 Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130029 Kernel command line: root=/dev/mapper/vglinux1-lv_ubuntu2 ro locale=fr_FR video=radeonfb:1280x1024@60 resume=/dev/mapper/vglinux1-lvswap Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffb000 (01406000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Preemptible RCU implementation. CPU 0 irqstacks, hard=c03c6000 soft=c03c5000 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1410.240 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 992 kB per task-struct memory footprint: 1200 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | double unlock: ok | ok | ok | ok | ok | ok | initialize held: ok | ok | ok | ok | ok | ok | bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | | ok | recursive read-lock #2: | ok | | ok | mixed read-write-lock: | ok | | ok | mixed write-read-lock: | ok | | ok | -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A => hirqs-on/12: ok | ok | ok | sirq-safe-A => hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | ------------------------------------------------------- Good, all 218 testcases passed! | --------------------------------- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 510712k/524208k available (1723k kernel code, 12936k reserved, 895k data, 200k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb5000 - 0xfffff000 ( 296 kB) vmalloc : 0xe0800000 - 0xfffb3000 ( 503 MB) lowmem : 0xc0000000 - 0xdffec000 ( 511 MB) .init : 0xc0390000 - 0xc03c2000 ( 200 kB) .data : 0xc02aecc8 - 0xc038eca0 ( 895 kB) .text : 0xc0100000 - 0xc02aecc8 (1723 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 16 of 16 pages preallocated Calibrating delay using timer specific routine.. 2824.66 BogoMIPS (lpj=5649325) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: AMD Athlon(TM) XP 1600+ stepping 02 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 356 Objects with 38 Devices 115 Methods 24 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired ACPI: setting ELCR to 0200 (from 0820) evxfevnt-0091 [00] enable : Transition to ACPI mode successful khelper used greatest stack depth: 3144 bytes left net_namespace: 304 bytes NET: Registered protocol family 16 ACPI: bus type pci registered khelper used greatest stack depth: 3032 bytes left PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT ------------[ cut here ]------------ WARNING: at arch/x86/mm/ioremap.c:129 __ioremap+0xc7/0x182() Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.25-rc2-mm1 #40 [] warn_on_slowpath+0x41/0x6d [] ? trace_hardirqs_on+0xb/0xd [] ? acpi_os_release_object+0x8/0xc [] ? acpi_ut_delete_object_desc+0x39/0x3e [] ? acpi_ut_delete_internal_obj+0x2c1/0x2c9 [] ? trace_hardirqs_on+0xb/0xd [] ? trace_hardirqs_on_caller+0xdf/0x100 [] ? trace_hardirqs_on+0xb/0xd [] __ioremap+0xc7/0x182 [] ioremap_nocache+0xa/0xc [] acpi_os_map_memory+0x11/0x1a [] acpi_ex_system_memory_space_handler+0xd3/0x228 [] ? acpi_ev_address_space_dispatch+0x142/0x1a8 [] ? acpi_ex_system_memory_space_handler+0x0/0x228 [] acpi_ev_address_space_dispatch+0x167/0x1a8 [] acpi_ex_access_region+0x1e4/0x270 [] acpi_ex_field_datum_io+0x153/0x2a1 [] ? cache_alloc_debugcheck_after+0xe9/0x165 [] acpi_ex_extract_from_field+0x91/0x224 [] ? acpi_ex_read_data_from_field+0x163/0x1b0 [] acpi_ex_read_data_from_field+0x180/0x1b0 [] acpi_ex_resolve_node_to_value+0x1aa/0x230 [] acpi_ex_resolve_to_value+0x270/0x2aa [] acpi_ex_resolve_operands+0x24e/0x52f [] acpi_ds_exec_end_op+0xb7/0x4f4 [] acpi_ps_parse_loop+0x5e5/0x79c [] acpi_ps_parse_aml+0xb2/0x2dd [] acpi_ps_execute_method+0x13d/0x20d [] acpi_ns_evaluate+0x10e/0x1b0 [] acpi_ut_evaluate_object+0x57/0x1a1 [] acpi_ut_execute_STA+0x22/0x7b [] ? acpi_ut_release_mutex+0x85/0x8f [] acpi_ns_get_device_callback+0x5a/0x121 [] acpi_ns_walk_namespace+0xfa/0x114 [] acpi_get_devices+0x47/0x5d [] ? acpi_ns_get_device_callback+0x0/0x121 [] ? ec_parse_device+0x0/0x6e [] acpi_ec_ecdt_probe+0xaa/0x10a [] acpi_init+0x73/0x21e [] ? class_create+0x4b/0x64 [] kernel_init+0xa3/0x1f3 [] ? restore_nocheck_notrace+0x0/0xe [] ? kernel_init+0x0/0x1f3 [] ? kernel_init+0x0/0x1f3 [] kernel_thread_helper+0x7/0x10 ======================= ---[ end trace 4eaa2a86a8e2da22 ]--- Completing Region/Field/Buffer/Package initialization:................................................ Initialized 16/24 Regions 2/2 Fields 19/19 Buffers 11/14 Packages (365 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods: Executed 0 _INI methods requiring 0 _STA executions (examined 41 objects) ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:04.4: quirk: region e200-e27f claimed by vt82c686 HW-mon pci 0000:00:04.4: quirk: region e800-e80f claimed by vt82c686 SMB ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Time: tsc clocksource has been installed. system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x1fffffff could not be reserved system 00:00: iomem range 0xfffe0000-0xffffffff could not be reserved system 00:02: ioport range 0x3f0-0x3f1 has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:03: ioport range 0xe400-0xe47f has been reserved system 00:03: ioport range 0xe800-0xe80f has been reserved PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: 0xb7000000-0xb7ffffff PREFETCH window: 0x00000000b8000000-0x00000000cfffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 7, 524288 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs... it is Switched to NOHz mode on CPU #0 Freeing initrd memory: 3285k freed Simple Boot Flag at 0x3a set to 0x1 msgmni has been set to 1004 for ipc namespace c0379080 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Applying VIA southbridge workaround PCI: VIA PCI bridge detected. Disabling DAC. pci 0000:00:04.0: Disabling VIA external APIC routing pci 0000:01:00.0: Boot video device ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=166.00 MHz radeonfb: PLL min 20000 max 40000 i2c-adapter i2c-1: unable to read EDID block. i2c-adapter i2c-1: unable to read EDID block. i2c-adapter i2c-1: unable to read EDID block. i2c-adapter i2c-3: unable to read EDID block. i2c-adapter i2c-3: unable to read EDID block. i2c-adapter i2c-3: unable to read EDID block. radeonfb: Monitor 1 type CRT found radeonfb: EDID probed radeonfb: Monitor 2 type no found Console: switching to colour frame buffer device 160x64 radeonfb (0000:01:00.0): ATI Radeon Ya input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: Processor [CPU0] (supports 16 throttling states) Marking TSC unstable due to: possible TSC halt in C2. Time: acpi_pm clocksource has been installed. brd: module loaded PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input2 TCP cubic registered NET: Registered protocol family 1 Using IPI Shortcut mode BIOS EDD facility v0.16 2004-Jun-25, 6 devices found Freeing unused kernel memory: 200k freed Write protecting the kernel text: 1724k Write protecting the kernel read-only data: 736k busybox used greatest stack depth: 2912 bytes left exe used greatest stack depth: 2856 bytes left consolechars used greatest stack depth: 2468 bytes left input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com SCSI subsystem initialized libata version 3.00 loaded. pata_via 0000:00:04.1: version 0.3.3 scsi0 : pata_via scsi1 : pata_via ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15 ata1.00: ATA-5: ST340016A, 3.75, max UDMA/100 ata1.00: 78165360 sectors, multi 16: LBA ata1.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 ata1.01: 160086528 sectors, multi 16: LBA ata1.00: configured for UDMA/100 ata1.01: configured for UDMA/100 ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL05, max UDMA/33 ata2.01: ATAPI: CD-950E/AKU, A4Q, max MWDMA2, CDB intr ata2.00: configured for UDMA/33 ata2.01: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA ST340016A 3.75 PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4165B DL05 PQ: 0 ANSI: 5 scsi 1:0:1:0: CD-ROM E-IDE CD-950E/AKU A4Q PQ: 0 ANSI: 5 modprobe used greatest stack depth: 2192 bytes left Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:1:0: [sdb] 160086528 512-byte hardware sectors (81964 MB) sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:1:0: [sdb] 160086528 512-byte hardware sectors (81964 MB) sd 0:0:1:0: [sdb] Write Protect is off sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > sd 0:0:1:0: [sdb] Attached SCSI disk modprobe used greatest stack depth: 1900 bytes left Loading Reiser4. See www.namesys.com for a description of Reiser4. PM: Starting manual resume from disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Linux agpgart interface v0.103 agpgart: Detected VIA Twister-K/KT133x/KM133 chipset parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] agpgart: AGP aperture is 256M @ 0xd0000000 parport_pc: VIA parallel port: io=0x378, irq=7 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb <4>ACPI: I/O resource vt596_smbus [0xe800-0xe807] conflicts with ACPI region SM00 [0xe800-0xe806] ACPI: Device needs an ACPI driver input: PC Speaker as /class/input/input4 via686a 0000:00:04.4: Forcing ISA address 0xe200 via686a 0000:00:04.4: Enabling sensors ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker USB Universal Host Controller Interface driver v3.0 Driver 'sr' needs updating - please use bus_type methods PCI: Enabling device 0000:00:0b.0 (0000 -> 0001) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr1: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray eth0: RealTek RTL-8029 found at 0x9400, IRQ 11, 00:40:95:46:6e:2d. PCI: Enabling device 0000:00:09.0 (0014 -> 0016) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 sr 1:0:1:0: Attached scsi CD-ROM sr1 sd 0:0:0:0: Attached scsi generic sg0 type 0 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 sd 0:0:1:0: Attached scsi generic sg1 type 0 Real Time Clock Driver v1.12ac sr 1:0:0:0: Attached scsi generic sg2 type 5 sr 1:0:1:0: Attached scsi generic sg3 type 5 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[b6800000-b68007ff] Max Packet=[2048] IR/IT contexts=[8/8] ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:04.2: UHCI Host Controller uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:04.2: irq 5, io base 0x0000b400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:04.3: UHCI Host Controller uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:04.3: irq 5, io base 0x0000b000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected PCI: Enabling device 0000:00:0d.0 (0004 -> 0005) ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00308d0120e085ca] NET: Registered protocol family 10 EXT3 FS on dm-10, internal journal ReiserFS: dm-0: found reiserfs format "3.6" with standard journal ReiserFS: dm-0: using ordered data mode ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-0: checking transaction log (dm-0) ReiserFS: dm-0: Using r5 hash to sort names reiser4: dm-5: found disk format 4.0.0. reiser4: dm-4: found disk format 4.0.0. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: sda7: found reiserfs format "3.6" with standard journal ReiserFS: sda7: using ordered data mode ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda7: checking transaction log (sda7) ReiserFS: sda7: Using r5 hash to sort names Adding 1048568k swap on /dev/mapper/vglinux1-lvswap. Priority:-1 extents:1 across:1048568k eth0: no IPv6 routers present lp0: using parport0 (interrupt-driven). [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.28.0 20060524 on minor 0 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [drm] Setting GART location based on new memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 1 usecs warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) mkfontscale used greatest stack depth: 1792 bytes left trashapplet used greatest stack depth: 1772 bytes left