| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1203515238-22848-9-git-send-email-ilpo.jarvinen@helsinki.fi>
Date: Wed, 20 Feb 2008 15:47:18 +0200
From: "Ilpo Järvinen" <ilpo.jarvinen@...sinki.fi>
To: netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: David Miller <davem@...emloft.net>,
Arnaldo Carvalho de Melo <acme@...hat.com>,
"Ilpo Järvinen" <ilpo.jarvinen@...sinki.fi>
Subject: [RFC PATCH 8/8] Jhash in too big for inlining, move under lib/
vmlinux.o:
62 functions changed, 66 bytes added, 10935 bytes removed, diff: -10869
...+ these to lib/jhash.o:
jhash_3words: 112
jhash2: 276
jhash: 475
select for networking code might need a more fine-grained approach.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@...sinki.fi>
---
drivers/infiniband/Kconfig | 1 +
drivers/net/Kconfig | 1 +
fs/Kconfig | 1 +
fs/dlm/Kconfig | 1 +
fs/gfs2/Kconfig | 1 +
include/linux/jhash.h | 99 +------------------------------------
init/Kconfig | 2 +
lib/Kconfig | 6 ++
lib/Makefile | 1 +
lib/jhash.c | 116 ++++++++++++++++++++++++++++++++++++++++++++
net/Kconfig | 1 +
11 files changed, 134 insertions(+), 96 deletions(-)
create mode 100644 lib/jhash.c
diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index a5dc78a..421ab71 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -2,6 +2,7 @@ menuconfig INFINIBAND
tristate "InfiniBand support"
depends on PCI || BROKEN
depends on HAS_IOMEM
+ select JHASH
---help---
Core support for InfiniBand (IB). Make sure to also select
any protocols you wish to use as well as drivers for your
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f337800..8257648 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2496,6 +2496,7 @@ config CHELSIO_T3
tristate "Chelsio Communications T3 10Gb Ethernet support"
depends on PCI
select FW_LOADER
+ select JHASH
help
This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
adapters.
diff --git a/fs/Kconfig b/fs/Kconfig
index d731282..693fe71 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1667,6 +1667,7 @@ config NFSD
select LOCKD
select SUNRPC
select EXPORTFS
+ select JHASH
select NFSD_V2_ACL if NFSD_V3_ACL
select NFS_ACL_SUPPORT if NFSD_V2_ACL
select NFSD_TCP if NFSD_V4
diff --git a/fs/dlm/Kconfig b/fs/dlm/Kconfig
index 2dbb422..f27a99a 100644
--- a/fs/dlm/Kconfig
+++ b/fs/dlm/Kconfig
@@ -4,6 +4,7 @@ menuconfig DLM
depends on SYSFS && (IPV6 || IPV6=n)
select CONFIGFS_FS
select IP_SCTP
+ select JHASH
help
A general purpose distributed lock manager for kernel or userspace
applications.
diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig
index de8e64c..b9dcabf 100644
--- a/fs/gfs2/Kconfig
+++ b/fs/gfs2/Kconfig
@@ -3,6 +3,7 @@ config GFS2_FS
depends on EXPERIMENTAL
select FS_POSIX_ACL
select CRC32
+ select JHASH
help
A cluster filesystem.
diff --git a/include/linux/jhash.h b/include/linux/jhash.h
index 2a2f99f..14200c6 100644
--- a/include/linux/jhash.h
+++ b/include/linux/jhash.h
@@ -1,25 +1,6 @@
#ifndef _LINUX_JHASH_H
#define _LINUX_JHASH_H
-/* jhash.h: Jenkins hash support.
- *
- * Copyright (C) 1996 Bob Jenkins (bob_jenkins@...tleburtle.net)
- *
- * http://burtleburtle.net/bob/hash/
- *
- * These are the credits from Bob's sources:
- *
- * lookup2.c, by Bob Jenkins, December 1996, Public Domain.
- * hash(), hash2(), hash3, and mix() are externally useful functions.
- * Routines to test the hash are included if SELF_TEST is defined.
- * You can use this free for any purpose. It has no warranty.
- *
- * Copyright (C) 2003 David S. Miller (davem@...hat.com)
- *
- * I've modified Bob's hash to be useful in the Linux kernel, and
- * any bugs present are surely my fault. -DaveM
- */
-
/* NOTE: Arguments are modified. */
#define __jhash_mix(a, b, c) \
{ \
@@ -41,77 +22,12 @@
* of bytes. No alignment or length assumptions are made about
* the input key.
*/
-static inline u32 jhash(const void *key, u32 length, u32 initval)
-{
- u32 a, b, c, len;
- const u8 *k = key;
-
- len = length;
- a = b = JHASH_GOLDEN_RATIO;
- c = initval;
-
- while (len >= 12) {
- a += (k[0] +((u32)k[1]<<8) +((u32)k[2]<<16) +((u32)k[3]<<24));
- b += (k[4] +((u32)k[5]<<8) +((u32)k[6]<<16) +((u32)k[7]<<24));
- c += (k[8] +((u32)k[9]<<8) +((u32)k[10]<<16)+((u32)k[11]<<24));
-
- __jhash_mix(a,b,c);
-
- k += 12;
- len -= 12;
- }
-
- c += length;
- switch (len) {
- case 11: c += ((u32)k[10]<<24);
- case 10: c += ((u32)k[9]<<16);
- case 9 : c += ((u32)k[8]<<8);
- case 8 : b += ((u32)k[7]<<24);
- case 7 : b += ((u32)k[6]<<16);
- case 6 : b += ((u32)k[5]<<8);
- case 5 : b += k[4];
- case 4 : a += ((u32)k[3]<<24);
- case 3 : a += ((u32)k[2]<<16);
- case 2 : a += ((u32)k[1]<<8);
- case 1 : a += k[0];
- };
-
- __jhash_mix(a,b,c);
-
- return c;
-}
+extern u32 jhash(const void *key, u32 length, u32 initval);
/* A special optimized version that handles 1 or more of u32s.
* The length parameter here is the number of u32s in the key.
*/
-static inline u32 jhash2(const u32 *k, u32 length, u32 initval)
-{
- u32 a, b, c, len;
-
- a = b = JHASH_GOLDEN_RATIO;
- c = initval;
- len = length;
-
- while (len >= 3) {
- a += k[0];
- b += k[1];
- c += k[2];
- __jhash_mix(a, b, c);
- k += 3; len -= 3;
- }
-
- c += length * 4;
-
- switch (len) {
- case 2 : b += k[1];
- case 1 : a += k[0];
- };
-
- __jhash_mix(a,b,c);
-
- return c;
-}
-
+extern u32 jhash2(const u32 *k, u32 length, u32 initval);
/* A special ultra-optimized versions that knows they are hashing exactly
* 3, 2 or 1 word(s).
@@ -119,16 +35,7 @@ static inline u32 jhash2(const u32 *k, u32 length, u32 initval)
* NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally
* done at the end is not done here.
*/
-static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
-{
- a += JHASH_GOLDEN_RATIO;
- b += JHASH_GOLDEN_RATIO;
- c += initval;
-
- __jhash_mix(a, b, c);
-
- return c;
-}
+extern u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval);
static inline u32 jhash_2words(u32 a, u32 b, u32 initval)
{
diff --git a/init/Kconfig b/init/Kconfig
index 824d48c..3210626 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -601,6 +601,7 @@ config FUTEX
bool "Enable futex support" if EMBEDDED
default y
select RT_MUTEXES
+ select JHASH
help
Disabling this option will cause the kernel to be built without
support for "fast userspace mutexes". The resulting kernel may not
@@ -718,6 +719,7 @@ config PROFILING
config MARKERS
bool "Activate markers"
+ select JHASH
help
Place an empty function call at each marker site. Can be
dynamically changed for a probe function.
diff --git a/lib/Kconfig b/lib/Kconfig
index ba3d104..23d5507 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -85,6 +85,12 @@ config GENERIC_ALLOCATOR
boolean
#
+# Jenkins has support is selected if needed
+#
+config JHASH
+ boolean
+
+#
# reed solomon support is select'ed if needed
#
config REED_SOLOMON
diff --git a/lib/Makefile b/lib/Makefile
index 23de261..a100a49 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_CRC32) += crc32.o
obj-$(CONFIG_CRC7) += crc7.o
obj-$(CONFIG_LIBCRC32C) += libcrc32c.o
obj-$(CONFIG_GENERIC_ALLOCATOR) += genalloc.o
+obj-$(CONFIG_JHASH) += jhash.o
obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/
obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
diff --git a/lib/jhash.c b/lib/jhash.c
new file mode 100644
index 0000000..ee4083f
--- /dev/null
+++ b/lib/jhash.c
@@ -0,0 +1,116 @@
+/* jhash.c: Jenkins hash support.
+ *
+ * Copyright (C) 1996 Bob Jenkins (bob_jenkins@...tleburtle.net)
+ *
+ * http://burtleburtle.net/bob/hash/
+ *
+ * These are the credits from Bob's sources:
+ *
+ * lookup2.c, by Bob Jenkins, December 1996, Public Domain.
+ * hash(), hash2(), hash3, and mix() are externally useful functions.
+ * Routines to test the hash are included if SELF_TEST is defined.
+ * You can use this free for any purpose. It has no warranty.
+ *
+ * Copyright (C) 2003 David S. Miller (davem@...hat.com)
+ *
+ * I've modified Bob's hash to be useful in the Linux kernel, and
+ * any bugs present are surely my fault. -DaveM
+ */
+#include <linux/kernel.h>
+#include <linux/jhash.h>
+#include <linux/module.h>
+
+/* The most generic version, hashes an arbitrary sequence
+ * of bytes. No alignment or length assumptions are made about
+ * the input key.
+ */
+u32 jhash(const void *key, u32 length, u32 initval)
+{
+ u32 a, b, c, len;
+ const u8 *k = key;
+
+ len = length;
+ a = b = JHASH_GOLDEN_RATIO;
+ c = initval;
+
+ while (len >= 12) {
+ a += (k[0] +((u32)k[1]<<8) +((u32)k[2]<<16) +((u32)k[3]<<24));
+ b += (k[4] +((u32)k[5]<<8) +((u32)k[6]<<16) +((u32)k[7]<<24));
+ c += (k[8] +((u32)k[9]<<8) +((u32)k[10]<<16)+((u32)k[11]<<24));
+
+ __jhash_mix(a,b,c);
+
+ k += 12;
+ len -= 12;
+ }
+
+ c += length;
+ switch (len) {
+ case 11: c += ((u32)k[10]<<24);
+ case 10: c += ((u32)k[9]<<16);
+ case 9 : c += ((u32)k[8]<<8);
+ case 8 : b += ((u32)k[7]<<24);
+ case 7 : b += ((u32)k[6]<<16);
+ case 6 : b += ((u32)k[5]<<8);
+ case 5 : b += k[4];
+ case 4 : a += ((u32)k[3]<<24);
+ case 3 : a += ((u32)k[2]<<16);
+ case 2 : a += ((u32)k[1]<<8);
+ case 1 : a += k[0];
+ };
+
+ __jhash_mix(a,b,c);
+
+ return c;
+}
+EXPORT_SYMBOL(jhash);
+
+/* A special optimized version that handles 1 or more of u32s.
+ * The length parameter here is the number of u32s in the key.
+ */
+u32 jhash2(const u32 *k, u32 length, u32 initval)
+{
+ u32 a, b, c, len;
+
+ a = b = JHASH_GOLDEN_RATIO;
+ c = initval;
+ len = length;
+
+ while (len >= 3) {
+ a += k[0];
+ b += k[1];
+ c += k[2];
+ __jhash_mix(a, b, c);
+ k += 3; len -= 3;
+ }
+
+ c += length * 4;
+
+ switch (len) {
+ case 2 : b += k[1];
+ case 1 : a += k[0];
+ };
+
+ __jhash_mix(a,b,c);
+
+ return c;
+}
+EXPORT_SYMBOL(jhash2);
+
+/* A special ultra-optimized versions that knows they are hashing exactly
+ * 3, 2 or 1 word(s).
+ *
+ * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally
+ * done at the end is not done here.
+ */
+u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
+{
+ a += JHASH_GOLDEN_RATIO;
+ b += JHASH_GOLDEN_RATIO;
+ c += initval;
+
+ __jhash_mix(a, b, c);
+
+ return c;
+}
+EXPORT_SYMBOL(jhash_3words);
diff --git a/net/Kconfig b/net/Kconfig
index 6627c6a..0749381 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -6,6 +6,7 @@ menu "Networking"
config NET
bool "Networking support"
+ select JHASH
---help---
Unless you really know what you are doing, you should say Y here.
The reason is that some programs need kernel networking support even
--
1.5.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists