| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <alpine.LFD.1.00.0802241010040.7616@localhost.localdomain>
Date: Sun, 24 Feb 2008 10:12:41 -0500 (EST)
From: "Robert P. J. Day" <rpjday@...shcourse.ca>
To: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
cc: Andrew Morton <akpm@...l.org>
Subject: [PATCH] DIGIEPCA: Remove long-obsolete digiepca driver.
Given that the removal of this driver has been under discussion for
over a year:
http://lkml.org/lkml/2006/10/26/231
it would seem time to get rid of it.
Signed-off-by: Robert P. J. Day <rpjday@...shcourse.ca>
---
Documentation/00-INDEX | 2
Documentation/digiepca.txt | 98
Documentation/ioctl-number.txt | 2
Documentation/kernel-parameters.txt | 4
Documentation/magic-number.txt | 1
MAINTAINERS | 7
drivers/char/Kconfig | 15
drivers/char/Makefile | 1
drivers/char/digi1.h | 100
drivers/char/epca.c | 2891 --------------------------
drivers/char/epca.h | 163 -
drivers/char/epcaconfig.h | 7
12 files changed, 3291 deletions(-)
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 8d55670..55cce9b 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -129,8 +129,6 @@ device-mapper/
- directory with info on Device Mapper.
devices.txt
- plain ASCII listing of all the nodes in /dev/ with major minor #'s.
-digiepca.txt
- - info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
dontdiff
- file containing a list of files that should never be diff'ed.
driver-model/
diff --git a/Documentation/digiepca.txt b/Documentation/digiepca.txt
deleted file mode 100644
index f2560e2..0000000
--- a/Documentation/digiepca.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-NOTE: This driver is obsolete. Digi provides a 2.6 driver (dgdm) at
-http://www.digi.com for PCI cards. They no longer maintain this driver,
-and have no 2.6 driver for ISA cards.
-
-This driver requires a number of user-space tools. They can be acquired from
-http://www.digi.com, but only works with 2.4 kernels.
-
-
-The Digi Intl. epca driver.
-----------------------------
-The Digi Intl. epca driver for Linux supports the following boards:
-
-Digi PC/Xem, PC/Xr, PC/Xe, PC/Xi, PC/Xeve
-Digi EISA/Xem, PCI/Xem, PCI/Xr
-
-Limitations:
-------------
-Currently the driver only autoprobes for supported PCI boards.
-
-The Linux MAKEDEV command does not support generating the Digiboard
-Devices. Users executing digiConfig to setup EISA and PC series cards
-will have their device nodes automatically constructed (cud?? for ~CLOCAL,
-and ttyD?? for CLOCAL). Users wishing to boot their board from the LILO
-prompt, or those users booting PCI cards may use buildDIGI to construct
-the necessary nodes.
-
-Notes:
-------
-This driver may be configured via LILO. For users who have already configured
-their driver using digiConfig, configuring from LILO will override previous
-settings. Multiple boards may be configured by issuing multiple LILO command
-lines. For examples see the bottom of this document.
-
-Device names start at 0 and continue up. Beware of this as previous Digi
-drivers started device names with 1.
-
-PCI boards are auto-detected and configured by the driver. PCI boards will
-be allocated device numbers (internally) beginning with the lowest PCI slot
-first. In other words a PCI card in slot 3 will always have higher device
-nodes than a PCI card in slot 1.
-
-LILO config examples:
----------------------
-Using LILO's APPEND command, a string of comma separated identifiers or
-integers can be used to configure supported boards. The six values in order
-are:
-
- Enable/Disable this card or Override,
- Type of card: PC/Xe (AccelePort) (0), PC/Xeve (1), PC/Xem or PC/Xr (2),
- EISA/Xem (3), PC/64Xe (4), PC/Xi (5),
- Enable/Disable alternate pin arrangement,
- Number of ports on this card,
- I/O Port where card is configured (in HEX if using string identifiers),
- Base of memory window (in HEX if using string identifiers),
-
-NOTE : PCI boards are auto-detected and configured. Do not attempt to
-configure PCI boards with the LILO append command. If you wish to override
-previous configuration data (As set by digiConfig), but you do not wish to
-configure any specific card (Example if there are PCI cards in the system)
-the following override command will accomplish this:
--> append="digi=2"
-
-Samples:
- append="digiepca=E,PC/Xe,D,16,200,D0000"
- or
- append="digi=1,0,0,16,512,851968"
-
-Supporting Tools:
------------------
-Supporting tools include digiDload, digiConfig, buildPCI, and ditty. See
-drivers/char/README.epca for more details. Note,
-this driver REQUIRES that digiDload be executed prior to it being used.
-Failure to do this will result in an ENODEV error.
-
-Documentation:
---------------
-Complete documentation for this product may be found in the tool package.
-
-Sources of information and support:
------------------------------------
-Digi Intl. support site for this product:
-
--> http://www.digi.com
-
-Acknowledgments:
-----------------
-Much of this work (And even text) was derived from a similar document
-supporting the original public domain DigiBoard driver Copyright (C)
-1994,1995 Troy De Jongh. Many thanks to Christoph Lameter
-(christoph@...eter.com) and Mike McLagan (mike.mclagan@...ux.org) who authored
-and contributed to the original document.
-
-Changelog:
-----------
-10-29-04: Update status of driver, remove dead links in document
- James Nelson <james4765@...il.com>
-
-2000 (?) Original Document
diff --git a/Documentation/ioctl-number.txt b/Documentation/ioctl-number.txt
index c18363b..ab77438 100644
--- a/Documentation/ioctl-number.txt
+++ b/Documentation/ioctl-number.txt
@@ -119,8 +119,6 @@ Code Seq# Include File Comments
'c' 00-7F linux/coda.h conflict!
'd' 00-FF linux/char/drm/drm/h conflict!
'd' 00-DF linux/video_decoder.h conflict!
-'d' F0-FF linux/digi1.h
-'e' all linux/digi1.h conflict!
'e' 00-1F linux/video_encoder.h conflict!
'e' 00-1F net/irda/irtty.h conflict!
'f' 00-1F linux/ext2_fs.h
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a4fc7fc..77c61c6 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -589,10 +589,6 @@ and is between 256 and 4096 characters. It is defined in the file
digi= [HW,SERIAL]
IO parameters + enable/disable command.
- digiepca= [HW,SERIAL]
- See drivers/char/README.epca and
- Documentation/digiepca.txt.
-
disable_mtrr_trim [X86, Intel and AMD only]
By default the kernel will trim any uncacheable
memory out of your available memory pool based on
diff --git a/Documentation/magic-number.txt b/Documentation/magic-number.txt
index bd450e7..4bf8354 100644
--- a/Documentation/magic-number.txt
+++ b/Documentation/magic-number.txt
@@ -131,7 +131,6 @@ RED_MAGIC1 0x5a2cf071 (any) mm/slab.c
STL_PORTMAGIC 0x5a7182c9 stlport include/linux/stallion.h
EEPROM_MAGIC_VALUE 0x5ab478d2 lanai_dev drivers/atm/lanai.c
HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state include/linux/hdlcdrv.h
-EPCA_MAGIC 0x5c6df104 channel include/linux/epca.h
PCXX_MAGIC 0x5c6df104 channel drivers/char/pcxx.h
KV_MAGIC 0x5f4b565f kernel_vars_s include/asm-mips64/sn/klkernvars.h
I810_STATE_MAGIC 0x63657373 i810_state sound/oss/i810_audio.c
diff --git a/MAINTAINERS b/MAINTAINERS
index c40f0ae..b55fbeb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1290,13 +1290,6 @@ W: http://lanana.org/docs/device-list/index.html
L: linux-kernel@...r.kernel.org
S: Maintained
-DIGI INTL. EPCA DRIVER
-P: Digi International, Inc
-M: Eng.Linux@...i.com
-L: Eng.Linux@...i.com
-W: http://www.digi.com
-S: Orphaned
-
DIRECTORY NOTIFICATION
P: Stephen Rothwell
M: sfr@...b.auug.org.au
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 47c6be8..fa2a8dd 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -156,21 +156,6 @@ config CYZ_INTR
status of the Cyclades-Z ports. The default op mode is polling. If
unsure, say N.
-config DIGIEPCA
- tristate "Digiboard Intelligent Async Support"
- depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
- ---help---
- This is a driver for Digi International's Xx, Xeve, and Xem series
- of cards which provide multiple serial ports. You would need
- something like this to connect more than two modems to your Linux
- box, for instance in order to become a dial-in server. This driver
- supports the original PC (ISA) boards as well as PCI, and EISA. If
- you have a card like this, say Y here and read the file
- <file:Documentation/digiepca.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called epca.
-
config ESPSERIAL
tristate "Hayes ESP serial port support"
depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 5407b76..b92557a 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_CYCLADES) += cyclades.o
obj-$(CONFIG_STALLION) += stallion.o
obj-$(CONFIG_ISTALLION) += istallion.o
obj-$(CONFIG_NOZOMI) += nozomi.o
-obj-$(CONFIG_DIGIEPCA) += epca.o
obj-$(CONFIG_SPECIALIX) += specialix.o
obj-$(CONFIG_MOXA_INTELLIO) += moxa.o
obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o
diff --git a/drivers/char/digi1.h b/drivers/char/digi1.h
deleted file mode 100644
index 94d4eab..0000000
--- a/drivers/char/digi1.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* Definitions for DigiBoard ditty(1) command. */
-
-#if !defined(TIOCMODG)
-#define TIOCMODG (('d'<<8) | 250) /* get modem ctrl state */
-#define TIOCMODS (('d'<<8) | 251) /* set modem ctrl state */
-#endif
-
-#if !defined(TIOCMSET)
-#define TIOCMSET (('d'<<8) | 252) /* set modem ctrl state */
-#define TIOCMGET (('d'<<8) | 253) /* set modem ctrl state */
-#endif
-
-#if !defined(TIOCMBIC)
-#define TIOCMBIC (('d'<<8) | 254) /* set modem ctrl state */
-#define TIOCMBIS (('d'<<8) | 255) /* set modem ctrl state */
-#endif
-
-#if !defined(TIOCSDTR)
-#define TIOCSDTR (('e'<<8) | 0) /* set DTR */
-#define TIOCCDTR (('e'<<8) | 1) /* clear DTR */
-#endif
-
-/************************************************************************
- * Ioctl command arguments for DIGI parameters.
- ************************************************************************/
-#define DIGI_GETA (('e'<<8) | 94) /* Read params */
-
-#define DIGI_SETA (('e'<<8) | 95) /* Set params */
-#define DIGI_SETAW (('e'<<8) | 96) /* Drain & set params */
-#define DIGI_SETAF (('e'<<8) | 97) /* Drain, flush & set params */
-
-#define DIGI_GETFLOW (('e'<<8) | 99) /* Get startc/stopc flow */
- /* control characters */
-#define DIGI_SETFLOW (('e'<<8) | 100) /* Set startc/stopc flow */
- /* control characters */
-#define DIGI_GETAFLOW (('e'<<8) | 101) /* Get Aux. startc/stopc */
- /* flow control chars */
-#define DIGI_SETAFLOW (('e'<<8) | 102) /* Set Aux. startc/stopc */
- /* flow control chars */
-
-#define DIGI_GETINFO (('e'<<8) | 103) /* Fill in digi_info */
-#define DIGI_POLLER (('e'<<8) | 104) /* Turn on/off poller */
-#define DIGI_INIT (('e'<<8) | 105) /* Allow things to run. */
-
-struct digiflow_struct
-{
- unsigned char startc; /* flow cntl start char */
- unsigned char stopc; /* flow cntl stop char */
-};
-
-typedef struct digiflow_struct digiflow_t;
-
-
-/************************************************************************
- * Values for digi_flags
- ************************************************************************/
-#define DIGI_IXON 0x0001 /* Handle IXON in the FEP */
-#define DIGI_FAST 0x0002 /* Fast baud rates */
-#define RTSPACE 0x0004 /* RTS input flow control */
-#define CTSPACE 0x0008 /* CTS output flow control */
-#define DSRPACE 0x0010 /* DSR output flow control */
-#define DCDPACE 0x0020 /* DCD output flow control */
-#define DTRPACE 0x0040 /* DTR input flow control */
-#define DIGI_FORCEDCD 0x0100 /* Force carrier */
-#define DIGI_ALTPIN 0x0200 /* Alternate RJ-45 pin config */
-#define DIGI_AIXON 0x0400 /* Aux flow control in fep */
-
-
-/************************************************************************
- * Values for digiDload
- ************************************************************************/
-#define NORMAL 0
-#define PCI_CTL 1
-
-#define SIZE8 0
-#define SIZE16 1
-#define SIZE32 2
-
-/************************************************************************
- * Structure used with ioctl commands for DIGI parameters.
- ************************************************************************/
-struct digi_struct
-{
- unsigned short digi_flags; /* Flags (see above) */
-};
-
-typedef struct digi_struct digi_t;
-
-struct digi_info
-{
- unsigned long board; /* Which board is this ? */
- unsigned char status; /* Alive or dead */
- unsigned char type; /* see epca.h */
- unsigned char subtype; /* For future XEM, XR, etc ... */
- unsigned short numports; /* Number of ports configured */
- unsigned char *port; /* I/O Address */
- unsigned char *membase; /* DPR Address */
- unsigned char *version; /* For future ... */
- unsigned short windowData; /* For future ... */
-} ;
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
deleted file mode 100644
index ffd747c..0000000
--- a/drivers/char/epca.c
+++ /dev/null
@@ -1,2891 +0,0 @@
-/*
- Copyright (C) 1996 Digi International.
-
- For technical support please email digiLinux@...i.com or
- call Digi tech support at (612) 912-3456
-
- ** This driver is no longer supported by Digi **
-
- Much of this design and code came from epca.c which was
- copyright (C) 1994, 1995 Troy De Jongh, and subsquently
- modified by David Nugent, Christoph Lameter, Mike McLagan.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-/* See README.epca for change history --DAT*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/delay.h>
-#include <linux/ctype.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <linux/spinlock.h>
-#include <linux/pci.h>
-#include "digiPCI.h"
-
-
-#include "digi1.h"
-#include "digiFep1.h"
-#include "epca.h"
-#include "epcaconfig.h"
-
-#define VERSION "1.3.0.1-LK2.6"
-
-/* This major needs to be submitted to Linux to join the majors list */
-#define DIGIINFOMAJOR 35 /* For Digi specific ioctl */
-
-
-#define MAXCARDS 7
-#define epcaassert(x, msg) if (!(x)) epca_error(__LINE__, msg)
-
-#define PFX "epca: "
-
-static int nbdevs, num_cards, liloconfig;
-static int digi_poller_inhibited = 1 ;
-
-static int setup_error_code;
-static int invalid_lilo_config;
-
-/*
- * The ISA boards do window flipping into the same spaces so its only sane with
- * a single lock. It's still pretty efficient.
- */
-static DEFINE_SPINLOCK(epca_lock);
-
-/* MAXBOARDS is typically 12, but ISA and EISA cards are restricted to 7 below. */
-static struct board_info boards[MAXBOARDS];
-
-static struct tty_driver *pc_driver;
-static struct tty_driver *pc_info;
-
-/* ------------------ Begin Digi specific structures -------------------- */
-
-/*
- * digi_channels represents an array of structures that keep track of each
- * channel of the Digi product. Information such as transmit and receive
- * pointers, termio data, and signal definitions (DTR, CTS, etc ...) are stored
- * here. This structure is NOT used to overlay the cards physical channel
- * structure.
- */
-static struct channel digi_channels[MAX_ALLOC];
-
-/*
- * card_ptr is an array used to hold the address of the first channel structure
- * of each card. This array will hold the addresses of various channels located
- * in digi_channels.
- */
-static struct channel *card_ptr[MAXCARDS];
-
-static struct timer_list epca_timer;
-
-/*
- * Begin generic memory functions. These functions will be alias (point at)
- * more specific functions dependent on the board being configured.
- */
-static void memwinon(struct board_info *b, unsigned int win);
-static void memwinoff(struct board_info *b, unsigned int win);
-static void globalwinon(struct channel *ch);
-static void rxwinon(struct channel *ch);
-static void txwinon(struct channel *ch);
-static void memoff(struct channel *ch);
-static void assertgwinon(struct channel *ch);
-static void assertmemoff(struct channel *ch);
-
-/* ---- Begin more 'specific' memory functions for cx_like products --- */
-
-static void pcxem_memwinon(struct board_info *b, unsigned int win);
-static void pcxem_memwinoff(struct board_info *b, unsigned int win);
-static void pcxem_globalwinon(struct channel *ch);
-static void pcxem_rxwinon(struct channel *ch);
-static void pcxem_txwinon(struct channel *ch);
-static void pcxem_memoff(struct channel *ch);
-
-/* ------ Begin more 'specific' memory functions for the pcxe ------- */
-
-static void pcxe_memwinon(struct board_info *b, unsigned int win);
-static void pcxe_memwinoff(struct board_info *b, unsigned int win);
-static void pcxe_globalwinon(struct channel *ch);
-static void pcxe_rxwinon(struct channel *ch);
-static void pcxe_txwinon(struct channel *ch);
-static void pcxe_memoff(struct channel *ch);
-
-/* ---- Begin more 'specific' memory functions for the pc64xe and pcxi ---- */
-/* Note : pc64xe and pcxi share the same windowing routines */
-
-static void pcxi_memwinon(struct board_info *b, unsigned int win);
-static void pcxi_memwinoff(struct board_info *b, unsigned int win);
-static void pcxi_globalwinon(struct channel *ch);
-static void pcxi_rxwinon(struct channel *ch);
-static void pcxi_txwinon(struct channel *ch);
-static void pcxi_memoff(struct channel *ch);
-
-/* - Begin 'specific' do nothing memory functions needed for some cards - */
-
-static void dummy_memwinon(struct board_info *b, unsigned int win);
-static void dummy_memwinoff(struct board_info *b, unsigned int win);
-static void dummy_globalwinon(struct channel *ch);
-static void dummy_rxwinon(struct channel *ch);
-static void dummy_txwinon(struct channel *ch);
-static void dummy_memoff(struct channel *ch);
-static void dummy_assertgwinon(struct channel *ch);
-static void dummy_assertmemoff(struct channel *ch);
-
-static struct channel *verifyChannel(struct tty_struct *);
-static void pc_sched_event(struct channel *, int);
-static void epca_error(int, char *);
-static void pc_close(struct tty_struct *, struct file *);
-static void shutdown(struct channel *);
-static void pc_hangup(struct tty_struct *);
-static void pc_put_char(struct tty_struct *, unsigned char);
-static int pc_write_room(struct tty_struct *);
-static int pc_chars_in_buffer(struct tty_struct *);
-static void pc_flush_buffer(struct tty_struct *);
-static void pc_flush_chars(struct tty_struct *);
-static int block_til_ready(struct tty_struct *, struct file *,
- struct channel *);
-static int pc_open(struct tty_struct *, struct file *);
-static void post_fep_init(unsigned int crd);
-static void epcapoll(unsigned long);
-static void doevent(int);
-static void fepcmd(struct channel *, int, int, int, int, int);
-static unsigned termios2digi_h(struct channel *ch, unsigned);
-static unsigned termios2digi_i(struct channel *ch, unsigned);
-static unsigned termios2digi_c(struct channel *ch, unsigned);
-static void epcaparam(struct tty_struct *, struct channel *);
-static void receive_data(struct channel *);
-static int pc_ioctl(struct tty_struct *, struct file *,
- unsigned int, unsigned long);
-static int info_ioctl(struct tty_struct *, struct file *,
- unsigned int, unsigned long);
-static void pc_set_termios(struct tty_struct *, struct ktermios *);
-static void do_softint(struct work_struct *work);
-static void pc_stop(struct tty_struct *);
-static void pc_start(struct tty_struct *);
-static void pc_throttle(struct tty_struct * tty);
-static void pc_unthrottle(struct tty_struct *tty);
-static void digi_send_break(struct channel *ch, int msec);
-static void setup_empty_event(struct tty_struct *tty, struct channel *ch);
-void epca_setup(char *, int *);
-
-static int pc_write(struct tty_struct *, const unsigned char *, int);
-static int pc_init(void);
-static int init_PCI(void);
-
-/*
- * Table of functions for each board to handle memory. Mantaining parallelism
- * is a *very* good idea here. The idea is for the runtime code to blindly call
- * these functions, not knowing/caring about the underlying hardware. This
- * stuff should contain no conditionals; if more functionality is needed a
- * different entry should be established. These calls are the interface calls
- * and are the only functions that should be accessed. Anyone caught making
- * direct calls deserves what they get.
- */
-static void memwinon(struct board_info *b, unsigned int win)
-{
- b->memwinon(b, win);
-}
-
-static void memwinoff(struct board_info *b, unsigned int win)
-{
- b->memwinoff(b, win);
-}
-
-static void globalwinon(struct channel *ch)
-{
- ch->board->globalwinon(ch);
-}
-
-static void rxwinon(struct channel *ch)
-{
- ch->board->rxwinon(ch);
-}
-
-static void txwinon(struct channel *ch)
-{
- ch->board->txwinon(ch);
-}
-
-static void memoff(struct channel *ch)
-{
- ch->board->memoff(ch);
-}
-static void assertgwinon(struct channel *ch)
-{
- ch->board->assertgwinon(ch);
-}
-
-static void assertmemoff(struct channel *ch)
-{
- ch->board->assertmemoff(ch);
-}
-
-/* PCXEM windowing is the same as that used in the PCXR and CX series cards. */
-static void pcxem_memwinon(struct board_info *b, unsigned int win)
-{
- outb_p(FEPWIN|win, b->port + 1);
-}
-
-static void pcxem_memwinoff(struct board_info *b, unsigned int win)
-{
- outb_p(0, b->port + 1);
-}
-
-static void pcxem_globalwinon(struct channel *ch)
-{
- outb_p( FEPWIN, (int)ch->board->port + 1);
-}
-
-static void pcxem_rxwinon(struct channel *ch)
-{
- outb_p(ch->rxwin, (int)ch->board->port + 1);
-}
-
-static void pcxem_txwinon(struct channel *ch)
-{
- outb_p(ch->txwin, (int)ch->board->port + 1);
-}
-
-static void pcxem_memoff(struct channel *ch)
-{
- outb_p(0, (int)ch->board->port + 1);
-}
-
-/* ----------------- Begin pcxe memory window stuff ------------------ */
-static void pcxe_memwinon(struct board_info *b, unsigned int win)
-{
- outb_p(FEPWIN | win, b->port + 1);
-}
-
-static void pcxe_memwinoff(struct board_info *b, unsigned int win)
-{
- outb_p(inb(b->port) & ~FEPMEM, b->port + 1);
- outb_p(0, b->port + 1);
-}
-
-static void pcxe_globalwinon(struct channel *ch)
-{
- outb_p(FEPWIN, (int)ch->board->port + 1);
-}
-
-static void pcxe_rxwinon(struct channel *ch)
-{
- outb_p(ch->rxwin, (int)ch->board->port + 1);
-}
-
-static void pcxe_txwinon(struct channel *ch)
-{
- outb_p(ch->txwin, (int)ch->board->port + 1);
-}
-
-static void pcxe_memoff(struct channel *ch)
-{
- outb_p(0, (int)ch->board->port);
- outb_p(0, (int)ch->board->port + 1);
-}
-
-/* ------------- Begin pc64xe and pcxi memory window stuff -------------- */
-static void pcxi_memwinon(struct board_info *b, unsigned int win)
-{
- outb_p(inb(b->port) | FEPMEM, b->port);
-}
-
-static void pcxi_memwinoff(struct board_info *b, unsigned int win)
-{
- outb_p(inb(b->port) & ~FEPMEM, b->port);
-}
-
-static void pcxi_globalwinon(struct channel *ch)
-{
- outb_p(FEPMEM, ch->board->port);
-}
-
-static void pcxi_rxwinon(struct channel *ch)
-{
- outb_p(FEPMEM, ch->board->port);
-}
-
-static void pcxi_txwinon(struct channel *ch)
-{
- outb_p(FEPMEM, ch->board->port);
-}
-
-static void pcxi_memoff(struct channel *ch)
-{
- outb_p(0, ch->board->port);
-}
-
-static void pcxi_assertgwinon(struct channel *ch)
-{
- epcaassert(inb(ch->board->port) & FEPMEM, "Global memory off");
-}
-
-static void pcxi_assertmemoff(struct channel *ch)
-{
- epcaassert(!(inb(ch->board->port) & FEPMEM), "Memory on");
-}
-
-/*
- * Not all of the cards need specific memory windowing routines. Some cards
- * (Such as PCI) needs no windowing routines at all. We provide these do
- * nothing routines so that the same code base can be used. The driver will
- * ALWAYS call a windowing routine if it thinks it needs to; regardless of the
- * card. However, dependent on the card the routine may or may not do anything.
- */
-static void dummy_memwinon(struct board_info *b, unsigned int win)
-{
-}
-
-static void dummy_memwinoff(struct board_info *b, unsigned int win)
-{
-}
-
-static void dummy_globalwinon(struct channel *ch)
-{
-}
-
-static void dummy_rxwinon(struct channel *ch)
-{
-}
-
-static void dummy_txwinon(struct channel *ch)
-{
-}
-
-static void dummy_memoff(struct channel *ch)
-{
-}
-
-static void dummy_assertgwinon(struct channel *ch)
-{
-}
-
-static void dummy_assertmemoff(struct channel *ch)
-{
-}
-
-static struct channel *verifyChannel(struct tty_struct *tty)
-{
- /*
- * This routine basically provides a sanity check. It insures that the
- * channel returned is within the proper range of addresses as well as
- * properly initialized. If some bogus info gets passed in
- * through tty->driver_data this should catch it.
- */
- if (tty) {
- struct channel *ch = (struct channel *)tty->driver_data;
- if ((ch >= &digi_channels[0]) && (ch < &digi_channels[nbdevs])) {
- if (ch->magic == EPCA_MAGIC)
- return ch;
- }
- }
- return NULL;
-}
-
-static void pc_sched_event(struct channel *ch, int event)
-{
- /*
- * We call this to schedule interrupt processing on some event. The
- * kernel sees our request and calls the related routine in OUR driver.
- */
- ch->event |= 1 << event;
- schedule_work(&ch->tqueue);
-}
-
-static void epca_error(int line, char *msg)
-{
- printk(KERN_ERR "epca_error (Digi): line = %d %s\n",line,msg);
-}
-
-static void pc_close(struct tty_struct *tty, struct file *filp)
-{
- struct channel *ch;
- unsigned long flags;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- if ((ch = verifyChannel(tty)) != NULL) {
- spin_lock_irqsave(&epca_lock, flags);
- if (tty_hung_up_p(filp)) {
- spin_unlock_irqrestore(&epca_lock, flags);
- return;
- }
- if (ch->count-- > 1) {
- /* Begin channel is open more than once */
- /*
- * Return without doing anything. Someone might still
- * be using the channel.
- */
- spin_unlock_irqrestore(&epca_lock, flags);
- return;
- }
-
- /* Port open only once go ahead with shutdown & reset */
- BUG_ON(ch->count < 0);
-
- /*
- * Let the rest of the driver know the channel is being closed.
- * This becomes important if an open is attempted before close
- * is finished.
- */
- ch->asyncflags |= ASYNC_CLOSING;
- tty->closing = 1;
-
- spin_unlock_irqrestore(&epca_lock, flags);
-
- if (ch->asyncflags & ASYNC_INITIALIZED) {
- /* Setup an event to indicate when the transmit buffer empties */
- setup_empty_event(tty, ch);
- tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */
- }
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
-
- tty_ldisc_flush(tty);
- shutdown(ch);
-
- spin_lock_irqsave(&epca_lock, flags);
- tty->closing = 0;
- ch->event = 0;
- ch->tty = NULL;
- spin_unlock_irqrestore(&epca_lock, flags);
-
- if (ch->blocked_open) {
- if (ch->close_delay)
- msleep_interruptible(jiffies_to_msecs(ch->close_delay));
- wake_up_interruptible(&ch->open_wait);
- }
- ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED |
- ASYNC_CLOSING);
- wake_up_interruptible(&ch->close_wait);
- }
-}
-
-static void shutdown(struct channel *ch)
-{
- unsigned long flags;
- struct tty_struct *tty;
- struct board_chan __iomem *bc;
-
- if (!(ch->asyncflags & ASYNC_INITIALIZED))
- return;
-
- spin_lock_irqsave(&epca_lock, flags);
-
- globalwinon(ch);
- bc = ch->brdchan;
-
- /*
- * In order for an event to be generated on the receipt of data the
- * idata flag must be set. Since we are shutting down, this is not
- * necessary clear this flag.
- */
- if (bc)
- writeb(0, &bc->idata);
- tty = ch->tty;
-
- /* If we're a modem control device and HUPCL is on, drop RTS & DTR. */
- if (tty->termios->c_cflag & HUPCL) {
- ch->omodem &= ~(ch->m_rts | ch->m_dtr);
- fepcmd(ch, SETMODEM, 0, ch->m_dtr | ch->m_rts, 10, 1);
- }
- memoff(ch);
-
- /*
- * The channel has officialy been closed. The next time it is opened it
- * will have to reinitialized. Set a flag to indicate this.
- */
- /* Prevent future Digi programmed interrupts from coming active */
- ch->asyncflags &= ~ASYNC_INITIALIZED;
- spin_unlock_irqrestore(&epca_lock, flags);
-}
-
-static void pc_hangup(struct tty_struct *tty)
-{
- struct channel *ch;
-
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- if ((ch = verifyChannel(tty)) != NULL) {
- unsigned long flags;
-
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
- tty_ldisc_flush(tty);
- shutdown(ch);
-
- spin_lock_irqsave(&epca_lock, flags);
- ch->tty = NULL;
- ch->event = 0;
- ch->count = 0;
- ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED);
- spin_unlock_irqrestore(&epca_lock, flags);
- wake_up_interruptible(&ch->open_wait);
- }
-}
-
-static int pc_write(struct tty_struct *tty,
- const unsigned char *buf, int bytesAvailable)
-{
- unsigned int head, tail;
- int dataLen;
- int size;
- int amountCopied;
- struct channel *ch;
- unsigned long flags;
- int remain;
- struct board_chan __iomem *bc;
-
- /*
- * pc_write is primarily called directly by the kernel routine
- * tty_write (Though it can also be called by put_char) found in
- * tty_io.c. pc_write is passed a line discipline buffer where the data
- * to be written out is stored. The line discipline implementation
- * itself is done at the kernel level and is not brought into the
- * driver.
- */
-
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- if ((ch = verifyChannel(tty)) == NULL)
- return 0;
-
- /* Make a pointer to the channel data structure found on the board. */
- bc = ch->brdchan;
- size = ch->txbufsize;
- amountCopied = 0;
-
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
-
- head = readw(&bc->tin) & (size - 1);
- tail = readw(&bc->tout);
-
- if (tail != readw(&bc->tout))
- tail = readw(&bc->tout);
- tail &= (size - 1);
-
- if (head >= tail) {
- /* head has not wrapped */
- /*
- * remain (much like dataLen above) represents the total amount
- * of space available on the card for data. Here dataLen
- * represents the space existing between the head pointer and
- * the end of buffer. This is important because a memcpy cannot
- * be told to automatically wrap around when it hits the buffer
- * end.
- */
- dataLen = size - head;
- remain = size - (head - tail) - 1;
- } else {
- /* head has wrapped around */
- remain = tail - head - 1;
- dataLen = remain;
- }
- /*
- * Check the space on the card. If we have more data than space; reduce
- * the amount of data to fit the space.
- */
- bytesAvailable = min(remain, bytesAvailable);
- txwinon(ch);
- while (bytesAvailable > 0) {
- /* there is data to copy onto card */
-
- /*
- * If head is not wrapped, the below will make sure the first
- * data copy fills to the end of card buffer.
- */
- dataLen = min(bytesAvailable, dataLen);
- memcpy_toio(ch->txptr + head, buf, dataLen);
- buf += dataLen;
- head += dataLen;
- amountCopied += dataLen;
- bytesAvailable -= dataLen;
-
- if (head >= size) {
- head = 0;
- dataLen = tail;
- }
- }
- ch->statusflags |= TXBUSY;
- globalwinon(ch);
- writew(head, &bc->tin);
-
- if ((ch->statusflags & LOWWAIT) == 0) {
- ch->statusflags |= LOWWAIT;
- writeb(1, &bc->ilow);
- }
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- return amountCopied;
-}
-
-static void pc_put_char(struct tty_struct *tty, unsigned char c)
-{
- pc_write(tty, &c, 1);
-}
-
-static int pc_write_room(struct tty_struct *tty)
-{
- int remain;
- struct channel *ch;
- unsigned long flags;
- unsigned int head, tail;
- struct board_chan __iomem *bc;
-
- remain = 0;
-
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- if ((ch = verifyChannel(tty)) != NULL) {
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
-
- bc = ch->brdchan;
- head = readw(&bc->tin) & (ch->txbufsize - 1);
- tail = readw(&bc->tout);
-
- if (tail != readw(&bc->tout))
- tail = readw(&bc->tout);
- /* Wrap tail if necessary */
- tail &= (ch->txbufsize - 1);
-
- if ((remain = tail - head - 1) < 0 )
- remain += ch->txbufsize;
-
- if (remain && (ch->statusflags & LOWWAIT) == 0) {
- ch->statusflags |= LOWWAIT;
- writeb(1, &bc->ilow);
- }
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- }
- /* Return how much room is left on card */
- return remain;
-}
-
-static int pc_chars_in_buffer(struct tty_struct *tty)
-{
- int chars;
- unsigned int ctail, head, tail;
- int remain;
- unsigned long flags;
- struct channel *ch;
- struct board_chan __iomem *bc;
-
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- if ((ch = verifyChannel(tty)) == NULL)
- return 0;
-
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
-
- bc = ch->brdchan;
- tail = readw(&bc->tout);
- head = readw(&bc->tin);
- ctail = readw(&ch->mailbox->cout);
-
- if (tail == head && readw(&ch->mailbox->cin) == ctail && readb(&bc->tbusy) == 0)
- chars = 0;
- else { /* Begin if some space on the card has been used */
- head = readw(&bc->tin) & (ch->txbufsize - 1);
- tail &= (ch->txbufsize - 1);
- /*
- * The logic here is basically opposite of the above
- * pc_write_room here we are finding the amount of bytes in the
- * buffer filled. Not the amount of bytes empty.
- */
- if ((remain = tail - head - 1) < 0 )
- remain += ch->txbufsize;
- chars = (int)(ch->txbufsize - remain);
- /*
- * Make it possible to wakeup anything waiting for output in
- * tty_ioctl.c, etc.
- *
- * If not already set. Setup an event to indicate when the
- * transmit buffer empties.
- */
- if (!(ch->statusflags & EMPTYWAIT))
- setup_empty_event(tty,ch);
- } /* End if some space on the card has been used */
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- /* Return number of characters residing on card. */
- return chars;
-}
-
-static void pc_flush_buffer(struct tty_struct *tty)
-{
- unsigned int tail;
- unsigned long flags;
- struct channel *ch;
- struct board_chan __iomem *bc;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- if ((ch = verifyChannel(tty)) == NULL)
- return;
-
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
- bc = ch->brdchan;
- tail = readw(&bc->tout);
- /* Have FEP move tout pointer; effectively flushing transmit buffer */
- fepcmd(ch, STOUT, (unsigned) tail, 0, 0, 0);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- tty_wakeup(tty);
-}
-
-static void pc_flush_chars(struct tty_struct *tty)
-{
- struct channel *ch;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- if ((ch = verifyChannel(tty)) != NULL) {
- unsigned long flags;
- spin_lock_irqsave(&epca_lock, flags);
- /*
- * If not already set and the transmitter is busy setup an
- * event to indicate when the transmit empties.
- */
- if ((ch->statusflags & TXBUSY) && !(ch->statusflags & EMPTYWAIT))
- setup_empty_event(tty,ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- }
-}
-
-static int block_til_ready(struct tty_struct *tty,
- struct file *filp, struct channel *ch)
-{
- DECLARE_WAITQUEUE(wait,current);
- int retval, do_clocal = 0;
- unsigned long flags;
-
- if (tty_hung_up_p(filp)) {
- if (ch->asyncflags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
- return retval;
- }
-
- /*
- * If the device is in the middle of being closed, then block until
- * it's done, and then try again.
- */
- if (ch->asyncflags & ASYNC_CLOSING) {
- interruptible_sleep_on(&ch->close_wait);
-
- if (ch->asyncflags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
- }
-
- if (filp->f_flags & O_NONBLOCK) {
- /*
- * If non-blocking mode is set, then make the check up front
- * and then exit.
- */
- ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
- if (tty->termios->c_cflag & CLOCAL)
- do_clocal = 1;
- /* Block waiting for the carrier detect and the line to become free */
-
- retval = 0;
- add_wait_queue(&ch->open_wait, &wait);
-
- spin_lock_irqsave(&epca_lock, flags);
- /* We dec count so that pc_close will know when to free things */
- if (!tty_hung_up_p(filp))
- ch->count--;
- ch->blocked_open++;
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) ||
- !(ch->asyncflags & ASYNC_INITIALIZED))
- {
- if (ch->asyncflags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
- break;
- }
- if (!(ch->asyncflags & ASYNC_CLOSING) &&
- (do_clocal || (ch->imodem & ch->dcd)))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- spin_unlock_irqrestore(&epca_lock, flags);
- /*
- * Allow someone else to be scheduled. We will occasionally go
- * through this loop until one of the above conditions change.
- * The below schedule call will allow other processes to enter
- * and prevent this loop from hogging the cpu.
- */
- schedule();
- spin_lock_irqsave(&epca_lock, flags);
- }
-
- __set_current_state(TASK_RUNNING);
- remove_wait_queue(&ch->open_wait, &wait);
- if (!tty_hung_up_p(filp))
- ch->count++;
- ch->blocked_open--;
-
- spin_unlock_irqrestore(&epca_lock, flags);
-
- if (retval)
- return retval;
-
- ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
- return 0;
-}
-
-static int pc_open(struct tty_struct *tty, struct file * filp)
-{
- struct channel *ch;
- unsigned long flags;
- int line, retval, boardnum;
- struct board_chan __iomem *bc;
- unsigned int head;
-
- line = tty->index;
- if (line < 0 || line >= nbdevs)
- return -ENODEV;
-
- ch = &digi_channels[line];
- boardnum = ch->boardnum;
-
- /* Check status of board configured in system. */
-
- /*
- * I check to see if the epca_setup routine detected an user error. It
- * might be better to put this in pc_init, but for the moment it goes
- * here.
- */
- if (invalid_lilo_config) {
- if (setup_error_code & INVALID_BOARD_TYPE)
- printk(KERN_ERR "epca: pc_open: Invalid board type specified in kernel options.\n");
- if (setup_error_code & INVALID_NUM_PORTS)
- printk(KERN_ERR "epca: pc_open: Invalid number of ports specified in kernel options.\n");
- if (setup_error_code & INVALID_MEM_BASE)
- printk(KERN_ERR "epca: pc_open: Invalid board memory address specified in kernel options.\n");
- if (setup_error_code & INVALID_PORT_BASE)
- printk(KERN_ERR "epca; pc_open: Invalid board port address specified in kernel options.\n");
- if (setup_error_code & INVALID_BOARD_STATUS)
- printk(KERN_ERR "epca: pc_open: Invalid board status specified in kernel options.\n");
- if (setup_error_code & INVALID_ALTPIN)
- printk(KERN_ERR "epca: pc_open: Invalid board altpin specified in kernel options;\n");
- tty->driver_data = NULL; /* Mark this device as 'down' */
- return -ENODEV;
- }
- if (boardnum >= num_cards || boards[boardnum].status == DISABLED) {
- tty->driver_data = NULL; /* Mark this device as 'down' */
- return(-ENODEV);
- }
-
- if ((bc = ch->brdchan) == 0) {
- tty->driver_data = NULL;
- return -ENODEV;
- }
-
- spin_lock_irqsave(&epca_lock, flags);
- /*
- * Every time a channel is opened, increment a counter. This is
- * necessary because we do not wish to flush and shutdown the channel
- * until the last app holding the channel open, closes it.
- */
- ch->count++;
- /*
- * Set a kernel structures pointer to our local channel structure. This
- * way we can get to it when passed only a tty struct.
- */
- tty->driver_data = ch;
- /*
- * If this is the first time the channel has been opened, initialize
- * the tty->termios struct otherwise let pc_close handle it.
- */
- globalwinon(ch);
- ch->statusflags = 0;
-
- /* Save boards current modem status */
- ch->imodem = readb(&bc->mstat);
-
- /*
- * Set receive head and tail ptrs to each other. This indicates no data
- * available to read.
- */
- head = readw(&bc->rin);
- writew(head, &bc->rout);
-
- /* Set the channels associated tty structure */
- ch->tty = tty;
-
- /*
- * The below routine generally sets up parity, baud, flow control
- * issues, etc.... It effect both control flags and input flags.
- */
- epcaparam(tty,ch);
- ch->asyncflags |= ASYNC_INITIALIZED;
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
-
- retval = block_til_ready(tty, filp, ch);
- if (retval)
- return retval;
- /*
- * Set this again in case a hangup set it to zero while this open() was
- * waiting for the line...
- */
- spin_lock_irqsave(&epca_lock, flags);
- ch->tty = tty;
- globalwinon(ch);
- /* Enable Digi Data events */
- writeb(1, &bc->idata);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- return 0;
-}
-
-static int __init epca_module_init(void)
-{
- return pc_init();
-}
-module_init(epca_module_init);
-
-static struct pci_driver epca_driver;
-
-static void __exit epca_module_exit(void)
-{
- int count, crd;
- struct board_info *bd;
- struct channel *ch;
-
- del_timer_sync(&epca_timer);
-
- if (tty_unregister_driver(pc_driver) || tty_unregister_driver(pc_info))
- {
- printk(KERN_WARNING "epca: cleanup_module failed to un-register tty driver\n");
- return;
- }
- put_tty_driver(pc_driver);
- put_tty_driver(pc_info);
-
- for (crd = 0; crd < num_cards; crd++) {
- bd = &boards[crd];
- if (!bd) { /* sanity check */
- printk(KERN_ERR "<Error> - Digi : cleanup_module failed\n");
- return;
- }
- ch = card_ptr[crd];
- for (count = 0; count < bd->numports; count++, ch++) {
- if (ch && ch->tty)
- tty_hangup(ch->tty);
- }
- }
- pci_unregister_driver(&epca_driver);
-}
-module_exit(epca_module_exit);
-
-static const struct tty_operations pc_ops = {
- .open = pc_open,
- .close = pc_close,
- .write = pc_write,
- .write_room = pc_write_room,
- .flush_buffer = pc_flush_buffer,
- .chars_in_buffer = pc_chars_in_buffer,
- .flush_chars = pc_flush_chars,
- .put_char = pc_put_char,
- .ioctl = pc_ioctl,
- .set_termios = pc_set_termios,
- .stop = pc_stop,
- .start = pc_start,
- .throttle = pc_throttle,
- .unthrottle = pc_unthrottle,
- .hangup = pc_hangup,
-};
-
-static int info_open(struct tty_struct *tty, struct file * filp)
-{
- return 0;
-}
-
-static struct tty_operations info_ops = {
- .open = info_open,
- .ioctl = info_ioctl,
-};
-
-static int __init pc_init(void)
-{
- int crd;
- struct board_info *bd;
- unsigned char board_id = 0;
- int err = -ENOMEM;
-
- int pci_boards_found, pci_count;
-
- pci_count = 0;
-
- pc_driver = alloc_tty_driver(MAX_ALLOC);
- if (!pc_driver)
- goto out1;
-
- pc_info = alloc_tty_driver(MAX_ALLOC);
- if (!pc_info)
- goto out2;
-
- /*
- * If epca_setup has not been ran by LILO set num_cards to defaults;
- * copy board structure defined by digiConfig into drivers board
- * structure. Note : If LILO has ran epca_setup then epca_setup will
- * handle defining num_cards as well as copying the data into the board
- * structure.
- */
- if (!liloconfig) {
- /* driver has been configured via. epcaconfig */
- nbdevs = NBDEVS;
- num_cards = NUMCARDS;
- memcpy(&boards, &static_boards,
- sizeof(struct board_info) * NUMCARDS);
- }
-
- /*
- * Note : If lilo was used to configure the driver and the ignore
- * epcaconfig option was choosen (digiepca=2) then nbdevs and num_cards
- * will equal 0 at this point. This is okay; PCI cards will still be
- * picked up if detected.
- */
-
- /*
- * Set up interrupt, we will worry about memory allocation in
- * post_fep_init.
- */
- printk(KERN_INFO "DIGI epca driver version %s loaded.\n",VERSION);
-
- /*
- * NOTE : This code assumes that the number of ports found in the
- * boards array is correct. This could be wrong if the card in question
- * is PCI (And therefore has no ports entry in the boards structure.)
- * The rest of the information will be valid for PCI because the
- * beginning of pc_init scans for PCI and determines i/o and base
- * memory addresses. I am not sure if it is possible to read the number
- * of ports supported by the card prior to it being booted (Since that
- * is the state it is in when pc_init is run). Because it is not
- * possible to query the number of supported ports until after the card
- * has booted; we are required to calculate the card_ptrs as the card
- * is initialized (Inside post_fep_init). The negative thing about this
- * approach is that digiDload's call to GET_INFO will have a bad port
- * value. (Since this is called prior to post_fep_init.)
- */
- pci_boards_found = 0;
- if (num_cards < MAXBOARDS)
- pci_boards_found += init_PCI();
- num_cards += pci_boards_found;
-
- pc_driver->owner = THIS_MODULE;
- pc_driver->name = "ttyD";
- pc_driver->major = DIGI_MAJOR;
- pc_driver->minor_start = 0;
- pc_driver->type = TTY_DRIVER_TYPE_SERIAL;
- pc_driver->subtype = SERIAL_TYPE_NORMAL;
- pc_driver->init_termios = tty_std_termios;
- pc_driver->init_termios.c_iflag = 0;
- pc_driver->init_termios.c_oflag = 0;
- pc_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
- pc_driver->init_termios.c_lflag = 0;
- pc_driver->init_termios.c_ispeed = 9600;
- pc_driver->init_termios.c_ospeed = 9600;
- pc_driver->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(pc_driver, &pc_ops);
-
- pc_info->owner = THIS_MODULE;
- pc_info->name = "digi_ctl";
- pc_info->major = DIGIINFOMAJOR;
- pc_info->minor_start = 0;
- pc_info->type = TTY_DRIVER_TYPE_SERIAL;
- pc_info->subtype = SERIAL_TYPE_INFO;
- pc_info->init_termios = tty_std_termios;
- pc_info->init_termios.c_iflag = 0;
- pc_info->init_termios.c_oflag = 0;
- pc_info->init_termios.c_lflag = 0;
- pc_info->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL;
- pc_info->init_termios.c_ispeed = 9600;
- pc_info->init_termios.c_ospeed = 9600;
- pc_info->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(pc_info, &info_ops);
-
-
- for (crd = 0; crd < num_cards; crd++) {
- /*
- * This is where the appropriate memory handlers for the
- * hardware is set. Everything at runtime blindly jumps through
- * these vectors.
- */
-
- /* defined in epcaconfig.h */
- bd = &boards[crd];
-
- switch (bd->type) {
- case PCXEM:
- case EISAXEM:
- bd->memwinon = pcxem_memwinon;
- bd->memwinoff = pcxem_memwinoff;
- bd->globalwinon = pcxem_globalwinon;
- bd->txwinon = pcxem_txwinon;
- bd->rxwinon = pcxem_rxwinon;
- bd->memoff = pcxem_memoff;
- bd->assertgwinon = dummy_assertgwinon;
- bd->assertmemoff = dummy_assertmemoff;
- break;
-
- case PCIXEM:
- case PCIXRJ:
- case PCIXR:
- bd->memwinon = dummy_memwinon;
- bd->memwinoff = dummy_memwinoff;
- bd->globalwinon = dummy_globalwinon;
- bd->txwinon = dummy_txwinon;
- bd->rxwinon = dummy_rxwinon;
- bd->memoff = dummy_memoff;
- bd->assertgwinon = dummy_assertgwinon;
- bd->assertmemoff = dummy_assertmemoff;
- break;
-
- case PCXE:
- case PCXEVE:
- bd->memwinon = pcxe_memwinon;
- bd->memwinoff = pcxe_memwinoff;
- bd->globalwinon = pcxe_globalwinon;
- bd->txwinon = pcxe_txwinon;
- bd->rxwinon = pcxe_rxwinon;
- bd->memoff = pcxe_memoff;
- bd->assertgwinon = dummy_assertgwinon;
- bd->assertmemoff = dummy_assertmemoff;
- break;
-
- case PCXI:
- case PC64XE:
- bd->memwinon = pcxi_memwinon;
- bd->memwinoff = pcxi_memwinoff;
- bd->globalwinon = pcxi_globalwinon;
- bd->txwinon = pcxi_txwinon;
- bd->rxwinon = pcxi_rxwinon;
- bd->memoff = pcxi_memoff;
- bd->assertgwinon = pcxi_assertgwinon;
- bd->assertmemoff = pcxi_assertmemoff;
- break;
-
- default:
- break;
- }
-
- /*
- * Some cards need a memory segment to be defined for use in
- * transmit and receive windowing operations. These boards are
- * listed in the below switch. In the case of the XI the amount
- * of memory on the board is variable so the memory_seg is also
- * variable. This code determines what they segment should be.
- */
- switch (bd->type) {
- case PCXE:
- case PCXEVE:
- case PC64XE:
- bd->memory_seg = 0xf000;
- break;
-
- case PCXI:
- board_id = inb((int)bd->port);
- if ((board_id & 0x1) == 0x1) {
- /* it's an XI card */
- /* Is it a 64K board */
- if ((board_id & 0x30) == 0)
- bd->memory_seg = 0xf000;
-
- /* Is it a 128K board */
- if ((board_id & 0x30) == 0x10)
- bd->memory_seg = 0xe000;
-
- /* Is is a 256K board */
- if ((board_id & 0x30) == 0x20)
- bd->memory_seg = 0xc000;
-
- /* Is it a 512K board */
- if ((board_id & 0x30) == 0x30)
- bd->memory_seg = 0x8000;
- } else
- printk(KERN_ERR "epca: Board at 0x%x doesn't appear to be an XI\n",(int)bd->port);
- break;
- }
- }
-
- err = tty_register_driver(pc_driver);
- if (err) {
- printk(KERN_ERR "Couldn't register Digi PC/ driver");
- goto out3;
- }
-
- err = tty_register_driver(pc_info);
- if (err) {
- printk(KERN_ERR "Couldn't register Digi PC/ info ");
- goto out4;
- }
-
- /* Start up the poller to check for events on all enabled boards */
- init_timer(&epca_timer);
- epca_timer.function = epcapoll;
- mod_timer(&epca_timer, jiffies + HZ/25);
- return 0;
-
-out4:
- tty_unregister_driver(pc_driver);
-out3:
- put_tty_driver(pc_info);
-out2:
- put_tty_driver(pc_driver);
-out1:
- return err;
-}
-
-static void post_fep_init(unsigned int crd)
-{
- int i;
- void __iomem *memaddr;
- struct global_data __iomem *gd;
- struct board_info *bd;
- struct board_chan __iomem *bc;
- struct channel *ch;
- int shrinkmem = 0, lowwater;
-
- /*
- * This call is made by the user via. the ioctl call DIGI_INIT. It is
- * responsible for setting up all the card specific stuff.
- */
- bd = &boards[crd];
-
- /*
- * If this is a PCI board, get the port info. Remember PCI cards do not
- * have entries into the epcaconfig.h file, so we can't get the number
- * of ports from it. Unfortunetly, this means that anyone doing a
- * DIGI_GETINFO before the board has booted will get an invalid number
- * of ports returned (It should return 0). Calls to DIGI_GETINFO after
- * DIGI_INIT has been called will return the proper values.
- */
- if (bd->type >= PCIXEM) { /* Begin get PCI number of ports */
- /*
- * Below we use XEMPORTS as a memory offset regardless of which
- * PCI card it is. This is because all of the supported PCI
- * cards have the same memory offset for the channel data. This
- * will have to be changed if we ever develop a PCI/XE card.
- * NOTE : The FEP manual states that the port offset is 0xC22
- * as opposed to 0xC02. This is only true for PC/XE, and PC/XI
- * cards; not for the XEM, or CX series. On the PCI cards the
- * number of ports is determined by reading a ID PROM located
- * in the box attached to the card. The card can then determine
- * the index the id to determine the number of ports available.
- * (FYI - The id should be located at 0x1ac (And may use up to
- * 4 bytes if the box in question is a XEM or CX)).
- */
- /* PCI cards are already remapped at this point ISA are not */
- bd->numports = readw(bd->re_map_membase + XEMPORTS);
- epcaassert(bd->numports <= 64,"PCI returned a invalid number of ports");
- nbdevs += (bd->numports);
- } else {
- /* Fix up the mappings for ISA/EISA etc */
- /* FIXME: 64K - can we be smarter ? */
- bd->re_map_membase = ioremap(bd->membase, 0x10000);
- }
-
- if (crd != 0)
- card_ptr[crd] = card_ptr[crd-1] + boards[crd-1].numports;
- else
- card_ptr[crd] = &digi_channels[crd]; /* <- For card 0 only */
-
- ch = card_ptr[crd];
- epcaassert(ch <= &digi_channels[nbdevs - 1], "ch out of range");
-
- memaddr = bd->re_map_membase;
-
- /*
- * The below assignment will set bc to point at the BEGINING of the
- * cards channel structures. For 1 card there will be between 8 and 64
- * of these structures.
- */
- bc = memaddr + CHANSTRUCT;
-
- /*
- * The below assignment will set gd to point at the BEGINING of global
- * memory address 0xc00. The first data in that global memory actually
- * starts at address 0xc1a. The command in pointer begins at 0xd10.
- */
- gd = memaddr + GLOBAL;
-
- /*
- * XEPORTS (address 0xc22) points at the number of channels the card
- * supports. (For 64XE, XI, XEM, and XR use 0xc02)
- */
- if ((bd->type == PCXEVE || bd->type == PCXE) && (readw(memaddr + XEPORTS) < 3))
- shrinkmem = 1;
- if (bd->type < PCIXEM)
- if (!request_region((int)bd->port, 4, board_desc[bd->type]))
- return;
- memwinon(bd, 0);
-
- /*
- * Remember ch is the main drivers channels structure, while bc is the
- * cards channel structure.
- */
- for (i = 0; i < bd->numports; i++, ch++, bc++) {
- unsigned long flags;
- u16 tseg, rseg;
-
- ch->brdchan = bc;
- ch->mailbox = gd;
- INIT_WORK(&ch->tqueue, do_softint);
- ch->board = &boards[crd];
-
- spin_lock_irqsave(&epca_lock, flags);
- switch (bd->type) {
- /*
- * Since some of the boards use different bitmaps for
- * their control signals we cannot hard code these
- * values and retain portability. We virtualize this
- * data here.
- */
- case EISAXEM:
- case PCXEM:
- case PCIXEM:
- case PCIXRJ:
- case PCIXR:
- ch->m_rts = 0x02;
- ch->m_dcd = 0x80;
- ch->m_dsr = 0x20;
- ch->m_cts = 0x10;
- ch->m_ri = 0x40;
- ch->m_dtr = 0x01;
- break;
-
- case PCXE:
- case PCXEVE:
- case PCXI:
- case PC64XE:
- ch->m_rts = 0x02;
- ch->m_dcd = 0x08;
- ch->m_dsr = 0x10;
- ch->m_cts = 0x20;
- ch->m_ri = 0x40;
- ch->m_dtr = 0x80;
- break;
- }
-
- if (boards[crd].altpin) {
- ch->dsr = ch->m_dcd;
- ch->dcd = ch->m_dsr;
- ch->digiext.digi_flags |= DIGI_ALTPIN;
- } else {
- ch->dcd = ch->m_dcd;
- ch->dsr = ch->m_dsr;
- }
-
- ch->boardnum = crd;
- ch->channelnum = i;
- ch->magic = EPCA_MAGIC;
- ch->tty = NULL;
-
- if (shrinkmem) {
- fepcmd(ch, SETBUFFER, 32, 0, 0, 0);
- shrinkmem = 0;
- }
-
- tseg = readw(&bc->tseg);
- rseg = readw(&bc->rseg);
-
- switch (bd->type) {
- case PCIXEM:
- case PCIXRJ:
- case PCIXR:
- /* Cover all the 2MEG cards */
- ch->txptr = memaddr + ((tseg << 4) & 0x1fffff);
- ch->rxptr = memaddr + ((rseg << 4) & 0x1fffff);
- ch->txwin = FEPWIN | (tseg >> 11);
- ch->rxwin = FEPWIN | (rseg >> 11);
- break;
-
- case PCXEM:
- case EISAXEM:
- /* Cover all the 32K windowed cards */
- /* Mask equal to window size - 1 */
- ch->txptr = memaddr + ((tseg << 4) & 0x7fff);
- ch->rxptr = memaddr + ((rseg << 4) & 0x7fff);
- ch->txwin = FEPWIN | (tseg >> 11);
- ch->rxwin = FEPWIN | (rseg >> 11);
- break;
-
- case PCXEVE:
- case PCXE:
- ch->txptr = memaddr + (((tseg - bd->memory_seg) << 4) & 0x1fff);
- ch->txwin = FEPWIN | ((tseg - bd->memory_seg) >> 9);
- ch->rxptr = memaddr + (((rseg - bd->memory_seg) << 4) & 0x1fff);
- ch->rxwin = FEPWIN | ((rseg - bd->memory_seg) >>9 );
- break;
-
- case PCXI:
- case PC64XE:
- ch->txptr = memaddr + ((tseg - bd->memory_seg) << 4);
- ch->rxptr = memaddr + ((rseg - bd->memory_seg) << 4);
- ch->txwin = ch->rxwin = 0;
- break;
- }
-
- ch->txbufhead = 0;
- ch->txbufsize = readw(&bc->tmax) + 1;
-
- ch->rxbufhead = 0;
- ch->rxbufsize = readw(&bc->rmax) + 1;
-
- lowwater = ch->txbufsize >= 2000 ? 1024 : (ch->txbufsize / 2);
-
- /* Set transmitter low water mark */
- fepcmd(ch, STXLWATER, lowwater, 0, 10, 0);
-
- /* Set receiver low water mark */
- fepcmd(ch, SRXLWATER, (ch->rxbufsize / 4), 0, 10, 0);
-
- /* Set receiver high water mark */
- fepcmd(ch, SRXHWATER, (3 * ch->rxbufsize / 4), 0, 10, 0);
-
- writew(100, &bc->edelay);
- writeb(1, &bc->idata);
-
- ch->startc = readb(&bc->startc);
- ch->stopc = readb(&bc->stopc);
- ch->startca = readb(&bc->startca);
- ch->stopca = readb(&bc->stopca);
-
- ch->fepcflag = 0;
- ch->fepiflag = 0;
- ch->fepoflag = 0;
- ch->fepstartc = 0;
- ch->fepstopc = 0;
- ch->fepstartca = 0;
- ch->fepstopca = 0;
-
- ch->close_delay = 50;
- ch->count = 0;
- ch->blocked_open = 0;
- init_waitqueue_head(&ch->open_wait);
- init_waitqueue_head(&ch->close_wait);
-
- spin_unlock_irqrestore(&epca_lock, flags);
- }
-
- printk(KERN_INFO
- "Digi PC/Xx Driver V%s: %s I/O = 0x%lx Mem = 0x%lx Ports = %d\n",
- VERSION, board_desc[bd->type], (long)bd->port, (long)bd->membase, bd->numports);
- memwinoff(bd, 0);
-}
-
-static void epcapoll(unsigned long ignored)
-{
- unsigned long flags;
- int crd;
- volatile unsigned int head, tail;
- struct channel *ch;
- struct board_info *bd;
-
- /*
- * This routine is called upon every timer interrupt. Even though the
- * Digi series cards are capable of generating interrupts this method
- * of non-looping polling is more efficient. This routine checks for
- * card generated events (Such as receive data, are transmit buffer
- * empty) and acts on those events.
- */
- for (crd = 0; crd < num_cards; crd++) {
- bd = &boards[crd];
- ch = card_ptr[crd];
-
- if ((bd->status == DISABLED) || digi_poller_inhibited)
- continue;
-
- /*
- * assertmemoff is not needed here; indeed it is an empty
- * subroutine. It is being kept because future boards may need
- * this as well as some legacy boards.
- */
- spin_lock_irqsave(&epca_lock, flags);
-
- assertmemoff(ch);
-
- globalwinon(ch);
-
- /*
- * In this case head and tail actually refer to the event queue
- * not the transmit or receive queue.
- */
- head = readw(&ch->mailbox->ein);
- tail = readw(&ch->mailbox->eout);
-
- /* If head isn't equal to tail we have an event */
- if (head != tail)
- doevent(crd);
- memoff(ch);
-
- spin_unlock_irqrestore(&epca_lock, flags);
- } /* End for each card */
- mod_timer(&epca_timer, jiffies + (HZ / 25));
-}
-
-static void doevent(int crd)
-{
- void __iomem *eventbuf;
- struct channel *ch, *chan0;
- static struct tty_struct *tty;
- struct board_info *bd;
- struct board_chan __iomem *bc;
- unsigned int tail, head;
- int event, channel;
- int mstat, lstat;
-
- /*
- * This subroutine is called by epcapoll when an event is detected
- * in the event queue. This routine responds to those events.
- */
- bd = &boards[crd];
-
- chan0 = card_ptr[crd];
- epcaassert(chan0 <= &digi_channels[nbdevs - 1], "ch out of range");
- assertgwinon(chan0);
- while ((tail = readw(&chan0->mailbox->eout)) != (head = readw(&chan0->mailbox->ein))) { /* Begin while something in event queue */
- assertgwinon(chan0);
- eventbuf = bd->re_map_membase + tail + ISTART;
- /* Get the channel the event occurred on */
- channel = readb(eventbuf);
- /* Get the actual event code that occurred */
- event = readb(eventbuf + 1);
- /*
- * The two assignments below get the current modem status
- * (mstat) and the previous modem status (lstat). These are
- * useful becuase an event could signal a change in modem
- * signals itself.
- */
- mstat = readb(eventbuf + 2);
- lstat = readb(eventbuf + 3);
-
- ch = chan0 + channel;
- if ((unsigned)channel >= bd->numports || !ch) {
- if (channel >= bd->numports)
- ch = chan0;
- bc = ch->brdchan;
- goto next;
- }
-
- if ((bc = ch->brdchan) == NULL)
- goto next;
-
- if (event & DATA_IND) { /* Begin DATA_IND */
- receive_data(ch);
- assertgwinon(ch);
- } /* End DATA_IND */
- /* else *//* Fix for DCD transition missed bug */
- if (event & MODEMCHG_IND) {
- /* A modem signal change has been indicated */
- ch->imodem = mstat;
- if (ch->asyncflags & ASYNC_CHECK_CD) {
- if (mstat & ch->dcd) /* We are now receiving dcd */
- wake_up_interruptible(&ch->open_wait);
- else
- pc_sched_event(ch, EPCA_EVENT_HANGUP); /* No dcd; hangup */
- }
- }
- tty = ch->tty;
- if (tty) {
- if (event & BREAK_IND) {
- /* A break has been indicated */
- tty_insert_flip_char(tty, 0, TTY_BREAK);
- tty_schedule_flip(tty);
- } else if (event & LOWTX_IND) {
- if (ch->statusflags & LOWWAIT) {
- ch->statusflags &= ~LOWWAIT;
- tty_wakeup(tty);
- }
- } else if (event & EMPTYTX_IND) {
- /* This event is generated by setup_empty_event */
- ch->statusflags &= ~TXBUSY;
- if (ch->statusflags & EMPTYWAIT) {
- ch->statusflags &= ~EMPTYWAIT;
- tty_wakeup(tty);
- }
- }
- }
- next:
- globalwinon(ch);
- BUG_ON(!bc);
- writew(1, &bc->idata);
- writew((tail + 4) & (IMAX - ISTART - 4), &chan0->mailbox->eout);
- globalwinon(chan0);
- } /* End while something in event queue */
-}
-
-static void fepcmd(struct channel *ch, int cmd, int word_or_byte,
- int byte2, int ncmds, int bytecmd)
-{
- unchar __iomem *memaddr;
- unsigned int head, cmdTail, cmdStart, cmdMax;
- long count;
- int n;
-
- /* This is the routine in which commands may be passed to the card. */
-
- if (ch->board->status == DISABLED)
- return;
- assertgwinon(ch);
- /* Remember head (As well as max) is just an offset not a base addr */
- head = readw(&ch->mailbox->cin);
- /* cmdStart is a base address */
- cmdStart = readw(&ch->mailbox->cstart);
- /*
- * We do the addition below because we do not want a max pointer
- * relative to cmdStart. We want a max pointer that points at the
- * physical end of the command queue.
- */
- cmdMax = (cmdStart + 4 + readw(&ch->mailbox->cmax));
- memaddr = ch->board->re_map_membase;
-
- if (head >= (cmdMax - cmdStart) || (head & 03)) {
- printk(KERN_ERR "line %d: Out of range, cmd = %x, head = %x\n", __LINE__, cmd, head);
- printk(KERN_ERR "line %d: Out of range, cmdMax = %x, cmdStart = %x\n", __LINE__, cmdMax, cmdStart);
- return;
- }
- if (bytecmd) {
- writeb(cmd, memaddr + head + cmdStart + 0);
- writeb(ch->channelnum, memaddr + head + cmdStart + 1);
- /* Below word_or_byte is bits to set */
- writeb(word_or_byte, memaddr + head + cmdStart + 2);
- /* Below byte2 is bits to reset */
- writeb(byte2, memaddr + head + cmdStart + 3);
- } else {
- writeb(cmd, memaddr + head + cmdStart + 0);
- writeb(ch->channelnum, memaddr + head + cmdStart + 1);
- writeb(word_or_byte, memaddr + head + cmdStart + 2);
- }
- head = (head + 4) & (cmdMax - cmdStart - 4);
- writew(head, &ch->mailbox->cin);
- count = FEPTIMEOUT;
-
- for (;;) {
- count--;
- if (count == 0) {
- printk(KERN_ERR "<Error> - Fep not responding in fepcmd()\n");
- return;
- }
- head = readw(&ch->mailbox->cin);
- cmdTail = readw(&ch->mailbox->cout);
- n = (head - cmdTail) & (cmdMax - cmdStart - 4);
- /*
- * Basically this will break when the FEP acknowledges the
- * command by incrementing cmdTail (Making it equal to head).
- */
- if (n <= ncmds * (sizeof(short) * 4))
- break;
- }
-}
-
-/*
- * Digi products use fields in their channels structures that are very similar
- * to the c_cflag and c_iflag fields typically found in UNIX termios
- * structures. The below three routines allow mappings between these hardware
- * "flags" and their respective Linux flags.
- */
-static unsigned termios2digi_h(struct channel *ch, unsigned cflag)
-{
- unsigned res = 0;
-
- if (cflag & CRTSCTS) {
- ch->digiext.digi_flags |= (RTSPACE | CTSPACE);
- res |= ((ch->m_cts) | (ch->m_rts));
- }
-
- if (ch->digiext.digi_flags & RTSPACE)
- res |= ch->m_rts;
-
- if (ch->digiext.digi_flags & DTRPACE)
- res |= ch->m_dtr;
-
- if (ch->digiext.digi_flags & CTSPACE)
- res |= ch->m_cts;
-
- if (ch->digiext.digi_flags & DSRPACE)
- res |= ch->dsr;
-
- if (ch->digiext.digi_flags & DCDPACE)
- res |= ch->dcd;
-
- if (res & (ch->m_rts))
- ch->digiext.digi_flags |= RTSPACE;
-
- if (res & (ch->m_cts))
- ch->digiext.digi_flags |= CTSPACE;
-
- return res;
-}
-
-static unsigned termios2digi_i(struct channel *ch, unsigned iflag)
-{
- unsigned res = iflag & (IGNBRK | BRKINT | IGNPAR | PARMRK |
- INPCK | ISTRIP|IXON|IXANY|IXOFF);
- if (ch->digiext.digi_flags & DIGI_AIXON)
- res |= IAIXON;
- return res;
-}
-
-static unsigned termios2digi_c(struct channel *ch, unsigned cflag)
-{
- unsigned res = 0;
- if (cflag & CBAUDEX) {
- ch->digiext.digi_flags |= DIGI_FAST;
- /*
- * HUPCL bit is used by FEP to indicate fast baud table is to
- * be used.
- */
- res |= FEP_HUPCL;
- } else
- ch->digiext.digi_flags &= ~DIGI_FAST;
- /*
- * CBAUD has bit position 0x1000 set these days to indicate Linux
- * baud rate remap. Digi hardware can't handle the bit assignment.
- * (We use a different bit assignment for high speed.). Clear this
- * bit out.
- */
- res |= cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | CSTOPB | CSIZE);
- /*
- * This gets a little confusing. The Digi cards have their own
- * representation of c_cflags controlling baud rate. For the most part
- * this is identical to the Linux implementation. However; Digi
- * supports one rate (76800) that Linux doesn't. This means that the
- * c_cflag entry that would normally mean 76800 for Digi actually means
- * 115200 under Linux. Without the below mapping, a stty 115200 would
- * only drive the board at 76800. Since the rate 230400 is also found
- * after 76800, the same problem afflicts us when we choose a rate of
- * 230400. Without the below modificiation stty 230400 would actually
- * give us 115200.
- *
- * There are two additional differences. The Linux value for CLOCAL
- * (0x800; 0004000) has no meaning to the Digi hardware. Also in later
- * releases of Linux; the CBAUD define has CBAUDEX (0x1000; 0010000)
- * ored into it (CBAUD = 0x100f as opposed to 0xf). CBAUDEX should be
- * checked for a screened out prior to termios2digi_c returning. Since
- * CLOCAL isn't used by the board this can be ignored as long as the
- * returned value is used only by Digi hardware.
- */
- if (cflag & CBAUDEX) {
- /*
- * The below code is trying to guarantee that only baud rates
- * 115200 and 230400 are remapped. We use exclusive or because
- * the various baud rates share common bit positions and
- * therefore can't be tested for easily.
- */
- if ((!((cflag & 0x7) ^ (B115200 & ~CBAUDEX))) ||
- (!((cflag & 0x7) ^ (B230400 & ~CBAUDEX))))
- res += 1;
- }
- return res;
-}
-
-/* Caller must hold the locks */
-static void epcaparam(struct tty_struct *tty, struct channel *ch)
-{
- unsigned int cmdHead;
- struct ktermios *ts;
- struct board_chan __iomem *bc;
- unsigned mval, hflow, cflag, iflag;
-
- bc = ch->brdchan;
- epcaassert(bc !=0, "bc out of range");
-
- assertgwinon(ch);
- ts = tty->termios;
- if ((ts->c_cflag & CBAUD) == 0) { /* Begin CBAUD detected */
- cmdHead = readw(&bc->rin);
- writew(cmdHead, &bc->rout);
- cmdHead = readw(&bc->tin);
- /* Changing baud in mid-stream transmission can be wonderful */
- /*
- * Flush current transmit buffer by setting cmdTail pointer
- * (tout) to cmdHead pointer (tin). Hopefully the transmit
- * buffer is empty.
- */
- fepcmd(ch, STOUT, (unsigned) cmdHead, 0, 0, 0);
- mval = 0;
- } else { /* Begin CBAUD not detected */
- /*
- * c_cflags have changed but that change had nothing to do with
- * BAUD. Propagate the change to the card.
- */
- cflag = termios2digi_c(ch, ts->c_cflag);
- if (cflag != ch->fepcflag) {
- ch->fepcflag = cflag;
- /* Set baud rate, char size, stop bits, parity */
- fepcmd(ch, SETCTRLFLAGS, (unsigned) cflag, 0, 0, 0);
- }
- /*
- * If the user has not forced CLOCAL and if the device is not a
- * CALLOUT device (Which is always CLOCAL) we set flags such
- * that the driver will wait on carrier detect.
- */
- if (ts->c_cflag & CLOCAL)
- ch->asyncflags &= ~ASYNC_CHECK_CD;
- else
- ch->asyncflags |= ASYNC_CHECK_CD;
- mval = ch->m_dtr | ch->m_rts;
- } /* End CBAUD not detected */
- iflag = termios2digi_i(ch, ts->c_iflag);
- /* Check input mode flags */
- if (iflag != ch->fepiflag) {
- ch->fepiflag = iflag;
- /*
- * Command sets channels iflag structure on the board. Such
- * things as input soft flow control, handling of parity
- * errors, and break handling are all set here.
- */
- /* break handling, parity handling, input stripping, flow control chars */
- fepcmd(ch, SETIFLAGS, (unsigned int) ch->fepiflag, 0, 0, 0);
- }
- /*
- * Set the board mint value for this channel. This will cause hardware
- * events to be generated each time the DCD signal (Described in mint)
- * changes.
- */
- writeb(ch->dcd, &bc->mint);
- if ((ts->c_cflag & CLOCAL) || (ch->digiext.digi_flags & DIGI_FORCEDCD))
- if (ch->digiext.digi_flags & DIGI_FORCEDCD)
- writeb(0, &bc->mint);
- ch->imodem = readb(&bc->mstat);
- hflow = termios2digi_h(ch, ts->c_cflag);
- if (hflow != ch->hflow) {
- ch->hflow = hflow;
- /*
- * Hard flow control has been selected but the board is not
- * using it. Activate hard flow control now.
- */
- fepcmd(ch, SETHFLOW, hflow, 0xff, 0, 1);
- }
- mval ^= ch->modemfake & (mval ^ ch->modem);
-
- if (ch->omodem ^ mval) {
- ch->omodem = mval;
- /*
- * The below command sets the DTR and RTS mstat structure. If
- * hard flow control is NOT active these changes will drive the
- * output of the actual DTR and RTS lines. If hard flow control
- * is active, the changes will be saved in the mstat structure
- * and only asserted when hard flow control is turned off.
- */
-
- /* First reset DTR & RTS; then set them */
- fepcmd(ch, SETMODEM, 0, ((ch->m_dtr)|(ch->m_rts)), 0, 1);
- fepcmd(ch, SETMODEM, mval, 0, 0, 1);
- }
- if (ch->startc != ch->fepstartc || ch->stopc != ch->fepstopc) {
- ch->fepstartc = ch->startc;
- ch->fepstopc = ch->stopc;
- /*
- * The XON / XOFF characters have changed; propagate these
- * changes to the card.
- */
- fepcmd(ch, SONOFFC, ch->fepstartc, ch->fepstopc, 0, 1);
- }
- if (ch->startca != ch->fepstartca || ch->stopca != ch->fepstopca) {
- ch->fepstartca = ch->startca;
- ch->fepstopca = ch->stopca;
- /*
- * Similar to the above, this time the auxilarly XON / XOFF
- * characters have changed; propagate these changes to the card.
- */
- fepcmd(ch, SAUXONOFFC, ch->fepstartca, ch->fepstopca, 0, 1);
- }
-}
-
-/* Caller holds lock */
-static void receive_data(struct channel *ch)
-{
- unchar *rptr;
- struct ktermios *ts = NULL;
- struct tty_struct *tty;
- struct board_chan __iomem *bc;
- int dataToRead, wrapgap, bytesAvailable;
- unsigned int tail, head;
- unsigned int wrapmask;
-
- /*
- * This routine is called by doint when a receive data event has taken
- * place.
- */
- globalwinon(ch);
- if (ch->statusflags & RXSTOPPED)
- return;
- tty = ch->tty;
- if (tty)
- ts = tty->termios;
- bc = ch->brdchan;
- BUG_ON(!bc);
- wrapmask = ch->rxbufsize - 1;
-
- /*
- * Get the head and tail pointers to the receiver queue. Wrap the head
- * pointer if it has reached the end of the buffer.
- */
- head = readw(&bc->rin);
- head &= wrapmask;
- tail = readw(&bc->rout) & wrapmask;
-
- bytesAvailable = (head - tail) & wrapmask;
- if (bytesAvailable == 0)
- return;
-
- /* If CREAD bit is off or device not open, set TX tail to head */
- if (!tty || !ts || !(ts->c_cflag & CREAD)) {
- writew(head, &bc->rout);
- return;
- }
-
- if (tty_buffer_request_room(tty, bytesAvailable + 1) == 0)
- return;
-
- if (readb(&bc->orun)) {
- writeb(0, &bc->orun);
- printk(KERN_WARNING "epca; overrun! DigiBoard device %s\n",tty->name);
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
- rxwinon(ch);
- while (bytesAvailable > 0) { /* Begin while there is data on the card */
- wrapgap = (head >= tail) ? head - tail : ch->rxbufsize - tail;
- /*
- * Even if head has wrapped around only report the amount of
- * data to be equal to the size - tail. Remember memcpy can't
- * automaticly wrap around the receive buffer.
- */
- dataToRead = (wrapgap < bytesAvailable) ? wrapgap : bytesAvailable;
- /* Make sure we don't overflow the buffer */
- dataToRead = tty_prepare_flip_string(tty, &rptr, dataToRead);
- if (dataToRead == 0)
- break;
- /*
- * Move data read from our card into the line disciplines
- * buffer for translation if necessary.
- */
- memcpy_fromio(rptr, ch->rxptr + tail, dataToRead);
- tail = (tail + dataToRead) & wrapmask;
- bytesAvailable -= dataToRead;
- } /* End while there is data on the card */
- globalwinon(ch);
- writew(tail, &bc->rout);
- /* Must be called with global data */
- tty_schedule_flip(ch->tty);
-}
-
-static int info_ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- switch (cmd) {
- case DIGI_GETINFO:
- {
- struct digi_info di;
- int brd;
-
- if (get_user(brd, (unsigned int __user *)arg))
- return -EFAULT;
- if (brd < 0 || brd >= num_cards || num_cards == 0)
- return -ENODEV;
-
- memset(&di, 0, sizeof(di));
-
- di.board = brd;
- di.status = boards[brd].status;
- di.type = boards[brd].type ;
- di.numports = boards[brd].numports ;
- /* Legacy fixups - just move along nothing to see */
- di.port = (unsigned char *)boards[brd].port ;
- di.membase = (unsigned char *)boards[brd].membase ;
-
- if (copy_to_user((void __user *)arg, &di, sizeof(di)))
- return -EFAULT;
- break;
-
- }
-
- case DIGI_POLLER:
- {
- int brd = arg & 0xff000000 >> 16;
- unsigned char state = arg & 0xff;
-
- if (brd < 0 || brd >= num_cards) {
- printk(KERN_ERR "epca: DIGI POLLER : brd not valid!\n");
- return -ENODEV;
- }
- digi_poller_inhibited = state;
- break;
- }
-
- case DIGI_INIT:
- {
- /*
- * This call is made by the apps to complete the
- * initialization of the board(s). This routine is
- * responsible for setting the card to its initial
- * state and setting the drivers control fields to the
- * sutianle settings for the card in question.
- */
- int crd;
- for (crd = 0; crd < num_cards; crd++)
- post_fep_init(crd);
- break;
- }
- default:
- return -ENOTTY;
- }
- return 0;
-}
-
-static int pc_tiocmget(struct tty_struct *tty, struct file *file)
-{
- struct channel *ch = (struct channel *) tty->driver_data;
- struct board_chan __iomem *bc;
- unsigned int mstat, mflag = 0;
- unsigned long flags;
-
- if (ch)
- bc = ch->brdchan;
- else
- return -EINVAL;
-
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
- mstat = readb(&bc->mstat);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
-
- if (mstat & ch->m_dtr)
- mflag |= TIOCM_DTR;
- if (mstat & ch->m_rts)
- mflag |= TIOCM_RTS;
- if (mstat & ch->m_cts)
- mflag |= TIOCM_CTS;
- if (mstat & ch->dsr)
- mflag |= TIOCM_DSR;
- if (mstat & ch->m_ri)
- mflag |= TIOCM_RI;
- if (mstat & ch->dcd)
- mflag |= TIOCM_CD;
- return mflag;
-}
-
-static int pc_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
-{
- struct channel *ch = (struct channel *) tty->driver_data;
- unsigned long flags;
-
- if (!ch)
- return -EINVAL;
-
- spin_lock_irqsave(&epca_lock, flags);
- /*
- * I think this modemfake stuff is broken. It doesn't correctly reflect
- * the behaviour desired by the TIOCM* ioctls. Therefore this is
- * probably broken.
- */
- if (set & TIOCM_RTS) {
- ch->modemfake |= ch->m_rts;
- ch->modem |= ch->m_rts;
- }
- if (set & TIOCM_DTR) {
- ch->modemfake |= ch->m_dtr;
- ch->modem |= ch->m_dtr;
- }
- if (clear & TIOCM_RTS) {
- ch->modemfake |= ch->m_rts;
- ch->modem &= ~ch->m_rts;
- }
- if (clear & TIOCM_DTR) {
- ch->modemfake |= ch->m_dtr;
- ch->modem &= ~ch->m_dtr;
- }
- globalwinon(ch);
- /*
- * The below routine generally sets up parity, baud, flow control
- * issues, etc.... It effect both control flags and input flags.
- */
- epcaparam(tty,ch);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- return 0;
-}
-
-static int pc_ioctl(struct tty_struct *tty, struct file * file,
- unsigned int cmd, unsigned long arg)
-{
- digiflow_t dflow;
- int retval;
- unsigned long flags;
- unsigned int mflag, mstat;
- unsigned char startc, stopc;
- struct board_chan __iomem *bc;
- struct channel *ch = (struct channel *) tty->driver_data;
- void __user *argp = (void __user *)arg;
-
- if (ch)
- bc = ch->brdchan;
- else
- return -EINVAL;
-
- /*
- * For POSIX compliance we need to add more ioctls. See tty_ioctl.c in
- * /usr/src/linux/drivers/char for a good example. In particular think
- * about adding TCSETAF, TCSETAW, TCSETA, TCSETSF, TCSETSW, TCSETS.
- */
- switch (cmd) {
- case TCSBRK: /* SVID version: non-zero arg --> no break */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
- /* Setup an event to indicate when the transmit buffer empties */
- spin_lock_irqsave(&epca_lock, flags);
- setup_empty_event(tty,ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- tty_wait_until_sent(tty, 0);
- if (!arg)
- digi_send_break(ch, HZ / 4); /* 1/4 second */
- return 0;
- case TCSBRKP: /* support for POSIX tcsendbreak() */
- retval = tty_check_change(tty);
- if (retval)
- return retval;
-
- /* Setup an event to indicate when the transmit buffer empties */
- spin_lock_irqsave(&epca_lock, flags);
- setup_empty_event(tty,ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- tty_wait_until_sent(tty, 0);
- digi_send_break(ch, arg ? arg*(HZ/10) : HZ/4);
- return 0;
- case TIOCGSOFTCAR:
- if (put_user(C_CLOCAL(tty)?1:0, (unsigned long __user *)arg))
- return -EFAULT;
- return 0;
- case TIOCSSOFTCAR:
- {
- unsigned int value;
-
- if (get_user(value, (unsigned __user *)argp))
- return -EFAULT;
- tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) |
- (value ? CLOCAL : 0));
- return 0;
- }
- case TIOCMODG:
- mflag = pc_tiocmget(tty, file);
- if (put_user(mflag, (unsigned long __user *)argp))
- return -EFAULT;
- break;
- case TIOCMODS:
- if (get_user(mstat, (unsigned __user *)argp))
- return -EFAULT;
- return pc_tiocmset(tty, file, mstat, ~mstat);
- case TIOCSDTR:
- spin_lock_irqsave(&epca_lock, flags);
- ch->omodem |= ch->m_dtr;
- globalwinon(ch);
- fepcmd(ch, SETMODEM, ch->m_dtr, 0, 10, 1);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- break;
-
- case TIOCCDTR:
- spin_lock_irqsave(&epca_lock, flags);
- ch->omodem &= ~ch->m_dtr;
- globalwinon(ch);
- fepcmd(ch, SETMODEM, 0, ch->m_dtr, 10, 1);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- break;
- case DIGI_GETA:
- if (copy_to_user(argp, &ch->digiext, sizeof(digi_t)))
- return -EFAULT;
- break;
- case DIGI_SETAW:
- case DIGI_SETAF:
- if (cmd == DIGI_SETAW) {
- /* Setup an event to indicate when the transmit buffer empties */
- spin_lock_irqsave(&epca_lock, flags);
- setup_empty_event(tty,ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- tty_wait_until_sent(tty, 0);
- } else {
- /* ldisc lock already held in ioctl */
- if (tty->ldisc.flush_buffer)
- tty->ldisc.flush_buffer(tty);
- }
- /* Fall Thru */
- case DIGI_SETA:
- if (copy_from_user(&ch->digiext, argp, sizeof(digi_t)))
- return -EFAULT;
-
- if (ch->digiext.digi_flags & DIGI_ALTPIN) {
- ch->dcd = ch->m_dsr;
- ch->dsr = ch->m_dcd;
- } else {
- ch->dcd = ch->m_dcd;
- ch->dsr = ch->m_dsr;
- }
-
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
-
- /*
- * The below routine generally sets up parity, baud, flow
- * control issues, etc.... It effect both control flags and
- * input flags.
- */
- epcaparam(tty,ch);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- break;
-
- case DIGI_GETFLOW:
- case DIGI_GETAFLOW:
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
- if (cmd == DIGI_GETFLOW) {
- dflow.startc = readb(&bc->startc);
- dflow.stopc = readb(&bc->stopc);
- } else {
- dflow.startc = readb(&bc->startca);
- dflow.stopc = readb(&bc->stopca);
- }
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
-
- if (copy_to_user(argp, &dflow, sizeof(dflow)))
- return -EFAULT;
- break;
-
- case DIGI_SETAFLOW:
- case DIGI_SETFLOW:
- if (cmd == DIGI_SETFLOW) {
- startc = ch->startc;
- stopc = ch->stopc;
- } else {
- startc = ch->startca;
- stopc = ch->stopca;
- }
-
- if (copy_from_user(&dflow, argp, sizeof(dflow)))
- return -EFAULT;
-
- if (dflow.startc != startc || dflow.stopc != stopc) { /* Begin if setflow toggled */
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
-
- if (cmd == DIGI_SETFLOW) {
- ch->fepstartc = ch->startc = dflow.startc;
- ch->fepstopc = ch->stopc = dflow.stopc;
- fepcmd(ch, SONOFFC, ch->fepstartc, ch->fepstopc, 0, 1);
- } else {
- ch->fepstartca = ch->startca = dflow.startc;
- ch->fepstopca = ch->stopca = dflow.stopc;
- fepcmd(ch, SAUXONOFFC, ch->fepstartca, ch->fepstopca, 0, 1);
- }
-
- if (ch->statusflags & TXSTOPPED)
- pc_start(tty);
-
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- } /* End if setflow toggled */
- break;
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static void pc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
- struct channel *ch;
- unsigned long flags;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- if ((ch = verifyChannel(tty)) != NULL) { /* Begin if channel valid */
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
- epcaparam(tty, ch);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
-
- if ((old_termios->c_cflag & CRTSCTS) &&
- ((tty->termios->c_cflag & CRTSCTS) == 0))
- tty->hw_stopped = 0;
-
- if (!(old_termios->c_cflag & CLOCAL) &&
- (tty->termios->c_cflag & CLOCAL))
- wake_up_interruptible(&ch->open_wait);
-
- } /* End if channel valid */
-}
-
-static void do_softint(struct work_struct *work)
-{
- struct channel *ch = container_of(work, struct channel, tqueue);
- /* Called in response to a modem change event */
- if (ch && ch->magic == EPCA_MAGIC) {
- struct tty_struct *tty = ch->tty;
-
- if (tty && tty->driver_data) {
- if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) {
- tty_hangup(tty); /* FIXME: module removal race here - AKPM */
- wake_up_interruptible(&ch->open_wait);
- ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE;
- }
- }
- }
-}
-
-/*
- * pc_stop and pc_start provide software flow control to the routine and the
- * pc_ioctl routine.
- */
-static void pc_stop(struct tty_struct *tty)
-{
- struct channel *ch;
- unsigned long flags;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- if ((ch = verifyChannel(tty)) != NULL) {
- spin_lock_irqsave(&epca_lock, flags);
- if ((ch->statusflags & TXSTOPPED) == 0) { /* Begin if transmit stop requested */
- globalwinon(ch);
- /* STOP transmitting now !! */
- fepcmd(ch, PAUSETX, 0, 0, 0, 0);
- ch->statusflags |= TXSTOPPED;
- memoff(ch);
- } /* End if transmit stop requested */
- spin_unlock_irqrestore(&epca_lock, flags);
- }
-}
-
-static void pc_start(struct tty_struct *tty)
-{
- struct channel *ch;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- if ((ch = verifyChannel(tty)) != NULL) {
- unsigned long flags;
- spin_lock_irqsave(&epca_lock, flags);
- /* Just in case output was resumed because of a change in Digi-flow */
- if (ch->statusflags & TXSTOPPED) { /* Begin transmit resume requested */
- struct board_chan __iomem *bc;
- globalwinon(ch);
- bc = ch->brdchan;
- if (ch->statusflags & LOWWAIT)
- writeb(1, &bc->ilow);
- /* Okay, you can start transmitting again... */
- fepcmd(ch, RESUMETX, 0, 0, 0, 0);
- ch->statusflags &= ~TXSTOPPED;
- memoff(ch);
- } /* End transmit resume requested */
- spin_unlock_irqrestore(&epca_lock, flags);
- }
-}
-
-/*
- * The below routines pc_throttle and pc_unthrottle are used to slow (And
- * resume) the receipt of data into the kernels receive buffers. The exact
- * occurrence of this depends on the size of the kernels receive buffer and
- * what the 'watermarks' are set to for that buffer. See the n_ttys.c file for
- * more details.
- */
-static void pc_throttle(struct tty_struct *tty)
-{
- struct channel *ch;
- unsigned long flags;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- if ((ch = verifyChannel(tty)) != NULL) {
- spin_lock_irqsave(&epca_lock, flags);
- if ((ch->statusflags & RXSTOPPED) == 0) {
- globalwinon(ch);
- fepcmd(ch, PAUSERX, 0, 0, 0, 0);
- ch->statusflags |= RXSTOPPED;
- memoff(ch);
- }
- spin_unlock_irqrestore(&epca_lock, flags);
- }
-}
-
-static void pc_unthrottle(struct tty_struct *tty)
-{
- struct channel *ch;
- unsigned long flags;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- if ((ch = verifyChannel(tty)) != NULL) {
- /* Just in case output was resumed because of a change in Digi-flow */
- spin_lock_irqsave(&epca_lock, flags);
- if (ch->statusflags & RXSTOPPED) {
- globalwinon(ch);
- fepcmd(ch, RESUMERX, 0, 0, 0, 0);
- ch->statusflags &= ~RXSTOPPED;
- memoff(ch);
- }
- spin_unlock_irqrestore(&epca_lock, flags);
- }
-}
-
-void digi_send_break(struct channel *ch, int msec)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
- /*
- * Maybe I should send an infinite break here, schedule() for msec
- * amount of time, and then stop the break. This way, the user can't
- * screw up the FEP by causing digi_send_break() to be called (i.e. via
- * an ioctl()) more than once in msec amount of time.
- * Try this for now...
- */
- fepcmd(ch, SENDBREAK, msec, 0, 10, 0);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
-}
-
-/* Caller MUST hold the lock */
-static void setup_empty_event(struct tty_struct *tty, struct channel *ch)
-{
- struct board_chan __iomem *bc = ch->brdchan;
-
- globalwinon(ch);
- ch->statusflags |= EMPTYWAIT;
- /*
- * When set the iempty flag request a event to be generated when the
- * transmit buffer is empty (If there is no BREAK in progress).
- */
- writeb(1, &bc->iempty);
- memoff(ch);
-}
-
-void epca_setup(char *str, int *ints)
-{
- struct board_info board;
- int index, loop, last;
- char *temp, *t2;
- unsigned len;
-
- /*
- * If this routine looks a little strange it is because it is only
- * called if a LILO append command is given to boot the kernel with
- * parameters. In this way, we can provide the user a method of
- * changing his board configuration without rebuilding the kernel.
- */
- if (!liloconfig)
- liloconfig = 1;
-
- memset(&board, 0, sizeof(board));
-
- /* Assume the data is int first, later we can change it */
- /* I think that array position 0 of ints holds the number of args */
- for (last = 0, index = 1; index <= ints[0]; index++)
- switch (index) { /* Begin parse switch */
- case 1:
- board.status = ints[index];
- /*
- * We check for 2 (As opposed to 1; because 2 is a flag
- * instructing the driver to ignore epcaconfig.) For
- * this reason we check for 2.
- */
- if (board.status == 2) { /* Begin ignore epcaconfig as well as lilo cmd line */
- nbdevs = 0;
- num_cards = 0;
- return;
- } /* End ignore epcaconfig as well as lilo cmd line */
-
- if (board.status > 2) {
- printk(KERN_ERR "epca_setup: Invalid board status 0x%x\n", board.status);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_BOARD_STATUS;
- return;
- }
- last = index;
- break;
- case 2:
- board.type = ints[index];
- if (board.type >= PCIXEM) {
- printk(KERN_ERR "epca_setup: Invalid board type 0x%x\n", board.type);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_BOARD_TYPE;
- return;
- }
- last = index;
- break;
- case 3:
- board.altpin = ints[index];
- if (board.altpin > 1) {
- printk(KERN_ERR "epca_setup: Invalid board altpin 0x%x\n", board.altpin);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_ALTPIN;
- return;
- }
- last = index;
- break;
-
- case 4:
- board.numports = ints[index];
- if (board.numports < 2 || board.numports > 256) {
- printk(KERN_ERR "epca_setup: Invalid board numports 0x%x\n", board.numports);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_NUM_PORTS;
- return;
- }
- nbdevs += board.numports;
- last = index;
- break;
-
- case 5:
- board.port = ints[index];
- if (ints[index] <= 0) {
- printk(KERN_ERR "epca_setup: Invalid io port 0x%x\n", (unsigned int)board.port);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_PORT_BASE;
- return;
- }
- last = index;
- break;
-
- case 6:
- board.membase = ints[index];
- if (ints[index] <= 0) {
- printk(KERN_ERR "epca_setup: Invalid memory base 0x%x\n",(unsigned int)board.membase);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_MEM_BASE;
- return;
- }
- last = index;
- break;
-
- default:
- printk(KERN_ERR "<Error> - epca_setup: Too many integer parms\n");
- return;
-
- } /* End parse switch */
-
- while (str && *str) { /* Begin while there is a string arg */
- /* find the next comma or terminator */
- temp = str;
- /* While string is not null, and a comma hasn't been found */
- while (*temp && (*temp != ','))
- temp++;
- if (!*temp)
- temp = NULL;
- else
- *temp++ = 0;
- /* Set index to the number of args + 1 */
- index = last + 1;
-
- switch (index) {
- case 1:
- len = strlen(str);
- if (strncmp("Disable", str, len) == 0)
- board.status = 0;
- else if (strncmp("Enable", str, len) == 0)
- board.status = 1;
- else {
- printk(KERN_ERR "epca_setup: Invalid status %s\n", str);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_BOARD_STATUS;
- return;
- }
- last = index;
- break;
-
- case 2:
- for (loop = 0; loop < EPCA_NUM_TYPES; loop++)
- if (strcmp(board_desc[loop], str) == 0)
- break;
- /*
- * If the index incremented above refers to a
- * legitamate board type set it here.
- */
- if (index < EPCA_NUM_TYPES)
- board.type = loop;
- else {
- printk(KERN_ERR "epca_setup: Invalid board type: %s\n", str);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_BOARD_TYPE;
- return;
- }
- last = index;
- break;
-
- case 3:
- len = strlen(str);
- if (strncmp("Disable", str, len) == 0)
- board.altpin = 0;
- else if (strncmp("Enable", str, len) == 0)
- board.altpin = 1;
- else {
- printk(KERN_ERR "epca_setup: Invalid altpin %s\n", str);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_ALTPIN;
- return;
- }
- last = index;
- break;
-
- case 4:
- t2 = str;
- while (isdigit(*t2))
- t2++;
-
- if (*t2) {
- printk(KERN_ERR "epca_setup: Invalid port count %s\n", str);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_NUM_PORTS;
- return;
- }
-
- /*
- * There is not a man page for simple_strtoul but the
- * code can be found in vsprintf.c. The first argument
- * is the string to translate (To an unsigned long
- * obviously), the second argument can be the address
- * of any character variable or a NULL. If a variable
- * is given, the end pointer of the string will be
- * stored in that variable; if a NULL is given the end
- * pointer will not be returned. The last argument is
- * the base to use. If a 0 is indicated, the routine
- * will attempt to determine the proper base by looking
- * at the values prefix (A '0' for octal, a 'x' for
- * hex, etc ... If a value is given it will use that
- * value as the base.
- */
- board.numports = simple_strtoul(str, NULL, 0);
- nbdevs += board.numports;
- last = index;
- break;
-
- case 5:
- t2 = str;
- while (isxdigit(*t2))
- t2++;
-
- if (*t2) {
- printk(KERN_ERR "epca_setup: Invalid i/o address %s\n", str);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_PORT_BASE;
- return;
- }
-
- board.port = simple_strtoul(str, NULL, 16);
- last = index;
- break;
-
- case 6:
- t2 = str;
- while (isxdigit(*t2))
- t2++;
-
- if (*t2) {
- printk(KERN_ERR "epca_setup: Invalid memory base %s\n",str);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_MEM_BASE;
- return;
- }
- board.membase = simple_strtoul(str, NULL, 16);
- last = index;
- break;
- default:
- printk(KERN_ERR "epca: Too many string parms\n");
- return;
- }
- str = temp;
- } /* End while there is a string arg */
-
- if (last < 6) {
- printk(KERN_ERR "epca: Insufficient parms specified\n");
- return;
- }
-
- /* I should REALLY validate the stuff here */
- /* Copies our local copy of board into boards */
- memcpy((void *)&boards[num_cards],(void *)&board, sizeof(board));
- /* Does this get called once per lilo arg are what ? */
- printk(KERN_INFO "PC/Xx: Added board %i, %s %i ports at 0x%4.4X base 0x%6.6X\n",
- num_cards, board_desc[board.type],
- board.numports, (int)board.port, (unsigned int) board.membase);
- num_cards++;
-}
-
-enum epic_board_types {
- brd_xr = 0,
- brd_xem,
- brd_cx,
- brd_xrj,
-};
-
-/* indexed directly by epic_board_types enum */
-static struct {
- unsigned char board_type;
- unsigned bar_idx; /* PCI base address region */
-} epca_info_tbl[] = {
- { PCIXR, 0, },
- { PCIXEM, 0, },
- { PCICX, 0, },
- { PCIXRJ, 2, },
-};
-
-static int __devinit epca_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- static int board_num = -1;
- int board_idx, info_idx = ent->driver_data;
- unsigned long addr;
-
- if (pci_enable_device(pdev))
- return -EIO;
-
- board_num++;
- board_idx = board_num + num_cards;
- if (board_idx >= MAXBOARDS)
- goto err_out;
-
- addr = pci_resource_start (pdev, epca_info_tbl[info_idx].bar_idx);
- if (!addr) {
- printk (KERN_ERR PFX "PCI region #%d not available (size 0)\n",
- epca_info_tbl[info_idx].bar_idx);
- goto err_out;
- }
-
- boards[board_idx].status = ENABLED;
- boards[board_idx].type = epca_info_tbl[info_idx].board_type;
- boards[board_idx].numports = 0x0;
- boards[board_idx].port = addr + PCI_IO_OFFSET;
- boards[board_idx].membase = addr;
-
- if (!request_mem_region (addr + PCI_IO_OFFSET, 0x200000, "epca")) {
- printk (KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
- 0x200000, addr + PCI_IO_OFFSET);
- goto err_out;
- }
-
- boards[board_idx].re_map_port = ioremap(addr + PCI_IO_OFFSET, 0x200000);
- if (!boards[board_idx].re_map_port) {
- printk (KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
- 0x200000, addr + PCI_IO_OFFSET);
- goto err_out_free_pciio;
- }
-
- if (!request_mem_region (addr, 0x200000, "epca")) {
- printk (KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
- 0x200000, addr);
- goto err_out_free_iounmap;
- }
-
- boards[board_idx].re_map_membase = ioremap(addr, 0x200000);
- if (!boards[board_idx].re_map_membase) {
- printk (KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
- 0x200000, addr + PCI_IO_OFFSET);
- goto err_out_free_memregion;
- }
-
- /*
- * I don't know what the below does, but the hardware guys say its
- * required on everything except PLX (In this case XRJ).
- */
- if (info_idx != brd_xrj) {
- pci_write_config_byte(pdev, 0x40, 0);
- pci_write_config_byte(pdev, 0x46, 0);
- }
-
- return 0;
-
-err_out_free_memregion:
- release_mem_region (addr, 0x200000);
-err_out_free_iounmap:
- iounmap (boards[board_idx].re_map_port);
-err_out_free_pciio:
- release_mem_region (addr + PCI_IO_OFFSET, 0x200000);
-err_out:
- return -ENODEV;
-}
-
-
-static struct pci_device_id epca_pci_tbl[] = {
- { PCI_VENDOR_DIGI, PCI_DEVICE_XR, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xr },
- { PCI_VENDOR_DIGI, PCI_DEVICE_XEM, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xem },
- { PCI_VENDOR_DIGI, PCI_DEVICE_CX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_cx },
- { PCI_VENDOR_DIGI, PCI_DEVICE_XRJ, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xrj },
- { 0, }
-};
-
-MODULE_DEVICE_TABLE(pci, epca_pci_tbl);
-
-int __init init_PCI (void)
-{
- memset (&epca_driver, 0, sizeof (epca_driver));
- epca_driver.name = "epca";
- epca_driver.id_table = epca_pci_tbl;
- epca_driver.probe = epca_init_one;
-
- return pci_register_driver(&epca_driver);
-}
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/char/epca.h b/drivers/char/epca.h
deleted file mode 100644
index 3c77c02..0000000
--- a/drivers/char/epca.h
+++ /dev/null
@@ -1,163 +0,0 @@
-#define XEMPORTS 0xC02
-#define XEPORTS 0xC22
-
-#define MAX_ALLOC 0x100
-
-#define MAXBOARDS 12
-#define FEPCODESEG 0x0200L
-#define FEPCODE 0x2000L
-#define BIOSCODE 0xf800L
-
-#define MISCGLOBAL 0x0C00L
-#define NPORT 0x0C22L
-#define MBOX 0x0C40L
-#define PORTBASE 0x0C90L
-
-/* Begin code defines used for epca_setup */
-
-#define INVALID_BOARD_TYPE 0x1
-#define INVALID_NUM_PORTS 0x2
-#define INVALID_MEM_BASE 0x4
-#define INVALID_PORT_BASE 0x8
-#define INVALID_BOARD_STATUS 0x10
-#define INVALID_ALTPIN 0x20
-
-/* End code defines used for epca_setup */
-
-
-#define FEPCLR 0x00
-#define FEPMEM 0x02
-#define FEPRST 0x04
-#define FEPINT 0x08
-#define FEPMASK 0x0e
-#define FEPWIN 0x80
-
-#define PCXE 0
-#define PCXEVE 1
-#define PCXEM 2
-#define EISAXEM 3
-#define PC64XE 4
-#define PCXI 5
-#define PCIXEM 7
-#define PCICX 8
-#define PCIXR 9
-#define PCIXRJ 10
-#define EPCA_NUM_TYPES 6
-
-
-static char *board_desc[] =
-{
- "PC/Xe",
- "PC/Xeve",
- "PC/Xem",
- "EISA/Xem",
- "PC/64Xe",
- "PC/Xi",
- "unknown",
- "PCI/Xem",
- "PCI/CX",
- "PCI/Xr",
- "PCI/Xrj",
-};
-
-#define STARTC 021
-#define STOPC 023
-#define IAIXON 0x2000
-
-
-#define TXSTOPPED 0x1
-#define LOWWAIT 0x2
-#define EMPTYWAIT 0x4
-#define RXSTOPPED 0x8
-#define TXBUSY 0x10
-
-#define DISABLED 0
-#define ENABLED 1
-#define OFF 0
-#define ON 1
-
-#define FEPTIMEOUT 200000
-#define SERIAL_TYPE_INFO 3
-#define EPCA_EVENT_HANGUP 1
-#define EPCA_MAGIC 0x5c6df104L
-
-struct channel
-{
- long magic;
- unsigned char boardnum;
- unsigned char channelnum;
- unsigned char omodem; /* FEP output modem status */
- unsigned char imodem; /* FEP input modem status */
- unsigned char modemfake; /* Modem values to be forced */
- unsigned char modem; /* Force values */
- unsigned char hflow;
- unsigned char dsr;
- unsigned char dcd;
- unsigned char m_rts ; /* The bits used in whatever FEP */
- unsigned char m_dcd ; /* is indiginous to this board to */
- unsigned char m_dsr ; /* represent each of the physical */
- unsigned char m_cts ; /* handshake lines */
- unsigned char m_ri ;
- unsigned char m_dtr ;
- unsigned char stopc;
- unsigned char startc;
- unsigned char stopca;
- unsigned char startca;
- unsigned char fepstopc;
- unsigned char fepstartc;
- unsigned char fepstopca;
- unsigned char fepstartca;
- unsigned char txwin;
- unsigned char rxwin;
- unsigned short fepiflag;
- unsigned short fepcflag;
- unsigned short fepoflag;
- unsigned short txbufhead;
- unsigned short txbufsize;
- unsigned short rxbufhead;
- unsigned short rxbufsize;
- int close_delay;
- int count;
- int blocked_open;
- unsigned long event;
- int asyncflags;
- uint dev;
- unsigned long statusflags;
- unsigned long c_iflag;
- unsigned long c_cflag;
- unsigned long c_lflag;
- unsigned long c_oflag;
- unsigned char __iomem *txptr;
- unsigned char __iomem *rxptr;
- struct board_info *board;
- struct board_chan __iomem *brdchan;
- struct digi_struct digiext;
- struct tty_struct *tty;
- wait_queue_head_t open_wait;
- wait_queue_head_t close_wait;
- struct work_struct tqueue;
- struct global_data __iomem *mailbox;
-};
-
-struct board_info
-{
- unsigned char status;
- unsigned char type;
- unsigned char altpin;
- unsigned short numports;
- unsigned long port;
- unsigned long membase;
- void __iomem *re_map_port;
- void __iomem *re_map_membase;
- unsigned long memory_seg;
- void ( * memwinon ) (struct board_info *, unsigned int) ;
- void ( * memwinoff ) (struct board_info *, unsigned int) ;
- void ( * globalwinon ) (struct channel *) ;
- void ( * txwinon ) (struct channel *) ;
- void ( * rxwinon ) (struct channel *) ;
- void ( * memoff ) (struct channel *) ;
- void ( * assertgwinon ) (struct channel *) ;
- void ( * assertmemoff ) (struct channel *) ;
- unsigned char poller_inhibited ;
-};
-
diff --git a/drivers/char/epcaconfig.h b/drivers/char/epcaconfig.h
deleted file mode 100644
index 55dec06..0000000
--- a/drivers/char/epcaconfig.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#define NUMCARDS 0
-#define NBDEVS 0
-
-struct board_info static_boards[NUMCARDS]={
-};
-
-/* DO NOT HAND EDIT THIS FILE! */
========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry:
Have classroom, will lecture.
http://crashcourse.ca Waterloo, Ontario, CANADA
========================================================================
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists