| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 3 Mar 2008 02:48:23 +0100 (CET) From: Stefan Richter <stefanr@...6.in-berlin.de> To: Mikael Pettersson <mikpe@...uu.se> cc: "Carlos R. Mafra" <crmafra2@...il.com>, linux-kernel@...r.kernel.org, James.Bottomley@...senPartnership.com, htejun@...il.com, jens.axboe@...cle.com, linux-ide@...r.kernel.org, linux-scsi@...r.kernel.org Subject: Re: [BUG] 2.6.25-rc2-git3 broke cdrecord [resend with linux-ide and linux-scsi CCed] Mikael Pettersson wrote: > Carlos R. Mafra writes: > > On Sun 2.Mar'08 at 21:53:25 +0100, Mikael Pettersson wrote: > > > On my main workstation (Intel P965 chipset, ICH8 SATA driven by ahci, > > > Samsung/Toshiba SH-203P SATA DVD writer, FC5 user-space), cdrecord > > > stopped working on the 2.6.25-rc3 kernel, with the complaint: > > > > > > Warning: controller returns zero sized CD capabilities page. > > > Warning: controller returns wrong page 0 for CD capabilities page (2A). [...] > > I will try to help by pointing you to the patch here: > > http://lkml.org/lkml/2008/2/28/76 > > > > It seems your problem is similar to the one Mike Galbraith reported. > > That patch does seem to fix the problem. Thanks. This also fixes the same regression for FireWire. However, CD burning still fails for me via ide-cd, although in a different way than without the patch. (Without the patch, ide-cd also fails like described by you for SATA.) With the patch, the failure is as follows. I don't know if this is related to the data length arithmetic or something entirely different; all I learned so far is that 2.6.24 works. Application log from 2.6.25-rc3 + Tejun's patch + Gentoo's cdrkit-1.1.6 + k3b: System ----------------------- K3b Version: 1.0.4 KDE Version: 3.5.8 QT Version: 3.3.8 Kernel: 2.6.25-rc3 Devices ----------------------- MATSHITA CD-RW CW-8124 DACH (/dev/hda, ) [CD-R, CD-RW, CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R] Used versions ----------------------- cdrecord: 1.1.6 cdrecord ----------------------- /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits. scsidev: '/dev/hda' devname: '/dev/hda' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.6 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. TOC Type: 1 = CD-ROM Driveropts: 'burnfree' Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'MATSHITA' Identification : 'CD-RW CW-8124 ' Revision : 'DACH' Device seems to be: Generic mmc2 DVD-ROM. Current: 0x0009 (CD-R) Profile: 0x0010 (DVD-ROM) Profile: 0x0008 (CD-ROM) Profile: 0x0009 (CD-R) (current) Profile: 0x000A (CD-RW) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1716960 = 1676 KB FIFO size : 12582912 = 12288 KB Speed set to 4233 KB/s Track 01: data 698 MB Total size: 802 MB (79:28.48) = 357636 sectors Lout start: 802 MB (79:30/36) = 357636 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, low Beta category (A-) (2) ATIP start of lead in: -12508 (97:15/17) ATIP start of lead out: 359845 (79:59/70) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 22 Manufacturer: Ritek Co. Blocks total: 359845 Blocks current: 359845 Blocks remaining: 2209 Starting to write CD/DVD at speed 24.0 in dummy SAO mode for single session. Last chance to quit, starting dummy write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Sending CUE sheet... Errno: 0 (Success), write_g1 scsi sendcmd: no error CDB: 2A 00 FF FF FF 6A 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: Sense Key: 0xFFFFFFFF [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.001s timeout 200s Writing pregap for track 1 at -150 write track pad data: error after 0 bytes BFree: 1674 K BSize: 1676 K Starting new track at sector: 0 Track 01: 0 of 698 MB written. Errno: 0 (Success), write_g1 scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: Sense Key: 0xFFFFFFFF [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.004s timeout 200s /usr/bin/wodim: A write error occured. /usr/bin/wodim: Please properly read the error message above. write track data: error after 0 bytes Writing time: 5.257s Average write speed 909.6x. Fixating... Errno: 0 (Success), test unit ready scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: Sense Key: 0xFFFFFFFF [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 200s Errno: 0 (Success), flush cache scsi sendcmd: no error CDB: 35 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: Sense Key: 0xFFFFFFFF [], Segment 0 Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.001s timeout 200s WARNING: Some drives don't like fixation in dummy mode. Trouble flushing the cache Fixating time: 17.014s /usr/bin/wodim: fifo had 191 puts and 1 gets. /usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord command: ----------------------- /usr/bin/wodim -v gracetime=2 dev=/dev/hda speed=24 -dao -dummy driveropts=burnfree -eject -data -tsize=357636s - -- Stefan Richter -=====-==--- --== ---== http://arcgraph.de/sr/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists