| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1204648202-5495-9-git-send-email-wei.zhang@freescale.com>
Date: Wed, 5 Mar 2008 00:29:54 +0800
From: Zhang Wei <wei.zhang@...escale.com>
To: mporter@...nel.crashing.org, galak@...nel.crashing.org
Cc: linux-kernel@...r.kernel.org, linuxppc-dev@...abs.org,
Zhang Wei <wei.zhang@...escale.com>
Subject: [PATCH 09/17] Add serial RapidIO controller support, which includes MPC8548, MPC8641.
Signed-off-by: Zhang Wei <wei.zhang@...escale.com>
---
arch/powerpc/sysdev/fsl_rio.c | 74 +++++++++++++++++++++++++++++++++++-----
include/linux/rio.h | 6 +++
2 files changed, 70 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 9dae418..1535d12 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -21,6 +21,7 @@
#include <linux/rio.h>
#include <linux/rio_drv.h>
#include <linux/of_platform.h>
+#include <linux/delay.h>
#include <asm/io.h>
@@ -30,7 +31,12 @@
#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
#define RIO_ATMU_REGS_OFFSET 0x10c00
-#define RIO_MSG_REGS_OFFSET 0x11000
+#define RIO_P_MSG_REGS_OFFSET 0x11000
+#define RIO_S_MSG_REGS_OFFSET 0x13000
+#define RIO_ESCSR 0x158
+#define RIO_CCSR 0x15c
+#define RIO_ISR_AACR 0x10120
+#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
#define RIO_MAINT_WIN_SIZE 0x400000
#define RIO_DBELL_WIN_SIZE 0x1000
@@ -69,7 +75,7 @@
struct rio_atmu_regs {
u32 rowtar;
- u32 pad1;
+ u32 rowtear;
u32 rowbar;
u32 pad2;
u32 rowar;
@@ -95,7 +101,15 @@ struct rio_msg_regs {
u32 ifqdpar;
u32 pad6;
u32 ifqepar;
- u32 pad7[250];
+ u32 pad7[226];
+ u32 odmr;
+ u32 odsr;
+ u32 res0[4];
+ u32 oddpr;
+ u32 oddatr;
+ u32 res1[3];
+ u32 odretcr;
+ u32 res2[12];
u32 dmr;
u32 dsr;
u32 pad8;
@@ -175,8 +189,22 @@ static int fsl_rio_doorbell_send(struct rio_mport *mport,
struct rio_priv *priv = mport->priv;
pr_debug("fsl_doorbell_send: index %d destid %4.4x data %4.4x\n",
index, destid, data);
- out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
- out_be16(priv->dbell_win, data);
+ switch (mport->phy_type) {
+ case RIO_PHY_PARALLEL:
+ out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
+ out_be16(priv->dbell_win, data);
+ break;
+ case RIO_PHY_SERIAL:
+ /* In the serial version silicons, such as MPC8548, MPC8641,
+ * below operations is must be.
+ */
+ out_be32(&priv->msg_regs->odmr, 0x00000000);
+ out_be32(&priv->msg_regs->odretcr, 0x00000004);
+ out_be32(&priv->msg_regs->oddpr, destid << 16);
+ out_be32(&priv->msg_regs->oddatr,data );
+ out_be32(&priv->msg_regs->odmr, 0x00000001);
+ break;
+ }
return 0;
}
@@ -342,11 +370,22 @@ rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
memset(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot]
+ len, 0, RIO_MAX_MSG_SIZE - len);
- /* Set mbox field for message */
- desc->dport = mbox & 0x3;
+ switch(mport->phy_type) {
+ case RIO_PHY_PARALLEL:
+ /* Set mbox field for message */
+ desc->dport = mbox & 0x3;
- /* Enable EOMI interrupt, set priority, and set destid */
- desc->dattr = 0x28000000 | (rdev->destid << 2);
+ /* Enable EOMI interrupt, set priority, and set destid */
+ desc->dattr = 0x28000000 | (rdev->destid << 2);
+ break;
+ case RIO_PHY_SERIAL:
+ /* Set mbox field for message, and set destid */
+ desc->dport = (rdev->destid << 16) | ( mbox & 0x3);
+
+ /* Enable EOMI interrupt and priority */
+ desc->dattr = 0x28000000;
+ break;
+ }
/* Set transfer size aligned to next power of 2 (in double words) */
desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
@@ -923,6 +962,7 @@ int fsl_rio_setup(struct of_device *dev)
const u32 *dt_range, *cell;
struct resource regs;
int rlen;
+ u32 ccsr;
u64 law_start, law_size;
int paw, aw, sw;
@@ -1011,6 +1051,14 @@ int fsl_rio_setup(struct of_device *dev)
priv->regs_win = (u32) ioremap(regs.start, regs.end - regs.start + 1);
+ /* Probe the master port phy type */
+ ccsr = in_be32(priv->regs_win + RIO_CCSR);
+ port->phy_type = (ccsr & 1) ? RIO_PHY_SERIAL : RIO_PHY_PARALLEL;
+ dev_info(&dev->dev, "RapidIO PHY type: %s\n",
+ (port->phy_type == RIO_PHY_PARALLEL) ? "parallel" :
+ ((port->phy_type == RIO_PHY_SERIAL) ? "serial" :
+ "unknown"));
+
port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
& RIO_PEF_CTLS) >> 4;
dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
@@ -1020,7 +1068,13 @@ int fsl_rio_setup(struct of_device *dev)
+ RIO_ATMU_REGS_OFFSET);
priv->maint_atmu_regs = priv->atmu_regs + 1;
priv->dbell_atmu_regs = priv->atmu_regs + 2;
- priv->msg_regs = (struct rio_msg_regs *)(priv->regs_win + RIO_MSG_REGS_OFFSET);
+ priv->msg_regs = (struct rio_msg_regs *)(priv->regs_win +
+ ((port->phy_type == RIO_PHY_SERIAL) ?
+ RIO_S_MSG_REGS_OFFSET : RIO_P_MSG_REGS_OFFSET));
+
+ /* Set to receive any dist ID for serial RapidIO controller. */
+ if (port->phy_type == RIO_PHY_SERIAL)
+ out_be32((priv->regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
/* Configure maintenance transaction window */
out_be32(&priv->maint_atmu_regs->rowbar, 0x000c0000);
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 4b0156d..b96cdf4 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -145,6 +145,11 @@ struct rio_dbell {
void *dev_id;
};
+enum rio_phy_type {
+ RIO_PHY_PARALLEL,
+ RIO_PHY_SERIAL,
+};
+
/**
* struct rio_mport - RIO master port info
* @dbells: List of doorbell events
@@ -178,6 +183,7 @@ struct rio_mport {
* 0 - Small size. 256 devices.
* 1 - Large size, 65536 devices.
*/
+ enum rio_phy_type phy_type; /* RapidIO phy type */
unsigned char name[40];
void *priv; /* Master port private data */
};
--
1.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists