| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20080311012325.GA26084@havoc.gtf.org>
Date: Mon, 10 Mar 2008 21:23:26 -0400
From: Jeff Garzik <jeff@...zik.org>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-ide@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>
Subject: [git patches] libata fixes
Adds a new driver for RB500 CF.
Still chasing one cd reading/burning bug.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/Kconfig | 9 ++
drivers/ata/Makefile | 1 +
drivers/ata/ahci.c | 14 ++-
drivers/ata/libata-acpi.c | 8 +-
drivers/ata/libata-core.c | 17 ++-
drivers/ata/libata-eh.c | 10 ++
drivers/ata/libata-sff.c | 36 +++--
drivers/ata/pata_pdc2027x.c | 2 +-
drivers/ata/pata_rb500_cf.c | 314 +++++++++++++++++++++++++++++++++++++++++++
9 files changed, 383 insertions(+), 28 deletions(-)
create mode 100644 drivers/ata/pata_rb500_cf.c
Florian Fainelli (1):
[libata] Add support for the RB500 PATA CompactFlash
Harvey Harrison (1):
ata: replace remaining __FUNCTION__ occurrences
Roel Kluin (1):
ahci: logical-bitwise and confusion in ahci_save_initial_config()
Tejun Heo (3):
libata: allow LLDs w/o any reset method
libata-sff: handle controllers w/o ctl register
libata: don't allow sysfs read access to force param
peerchen (1):
ahci: add the Device IDs for nvidia MCP7B AHCI
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ba8f7f4..e469647 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -538,6 +538,15 @@ config PATA_RADISYS
If unsure, say N.
+config PATA_RB500
+ tristate "RouterBoard 500 PATA CompactFlash support"
+ depends on MIKROTIK_RB500
+ help
+ This option enables support for the RouterBoard 500
+ PATA CompactFlash controller.
+
+ If unsure, say N.
+
config PATA_RZ1000
tristate "PC Tech RZ1000 PATA support"
depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 701651e..0511e6f 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o
obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o
obj-$(CONFIG_PATA_QDI) += pata_qdi.o
obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o
+obj-$(CONFIG_PATA_RB500) += pata_rb500_cf.o
obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o
obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 8a49835..6978469 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -567,6 +567,18 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0bc8), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc9), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bca), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bcb), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bcc), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bd0), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bd1), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bd2), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bd3), board_ahci }, /* MCP7B */
/* SiS */
{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
@@ -672,7 +684,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
cap &= ~HOST_CAP_NCQ;
}
- if ((cap && HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
+ if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
dev_printk(KERN_INFO, &pdev->dev,
"controller can't do PMP, turning off CAP_PMP\n");
cap &= ~HOST_CAP_PMP;
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 9e8ec19..0770cb7 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -382,7 +382,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf)
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
- __FUNCTION__, ap->port_no);
+ __func__, ap->port_no);
/* _GTF has no input parameters */
status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output);
@@ -402,7 +402,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf)
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: "
"length or ptr is NULL (0x%llx, 0x%p)\n",
- __FUNCTION__,
+ __func__,
(unsigned long long)output.length,
output.pointer);
rc = -EINVAL;
@@ -432,7 +432,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf)
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG,
"%s: returning gtf=%p, gtf_count=%d\n",
- __FUNCTION__, *gtf, rc);
+ __func__, *gtf, rc);
}
return rc;
@@ -725,7 +725,7 @@ static int ata_acpi_push_id(struct ata_device *dev)
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: ix = %d, port#: %d\n",
- __FUNCTION__, dev->devno, ap->port_no);
+ __func__, dev->devno, ap->port_no);
/* Give the drive Identify data to the drive via the _SDD method */
/* _SDD: set up input parameters */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4fbcce7..4bbe31f 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -106,7 +106,8 @@ static struct ata_force_ent *ata_force_tbl;
static int ata_force_tbl_size;
static char ata_force_param_buf[PAGE_SIZE] __initdata;
-module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0444);
+/* param_buf is thrown away after initialization, disallow read */
+module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)");
int atapi_enabled = 1;
@@ -1719,7 +1720,7 @@ void ata_port_flush_task(struct ata_port *ap)
cancel_rearming_delayed_work(&ap->port_task);
if (ata_msg_ctl(ap))
- ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__);
+ ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__);
}
static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
@@ -2056,7 +2057,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
int rc;
if (ata_msg_ctl(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
retry:
@@ -2253,12 +2254,12 @@ int ata_dev_configure(struct ata_device *dev)
if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT -- nodev\n",
- __FUNCTION__);
+ __func__);
return 0;
}
if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
/* set horkage */
dev->horkage |= ata_dev_blacklisted(dev);
@@ -2279,7 +2280,7 @@ int ata_dev_configure(struct ata_device *dev)
ata_dev_printk(dev, KERN_DEBUG,
"%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x "
"85:%04x 86:%04x 87:%04x 88:%04x\n",
- __FUNCTION__,
+ __func__,
id[49], id[82], id[83], id[84],
id[85], id[86], id[87], id[88]);
@@ -2511,13 +2512,13 @@ int ata_dev_configure(struct ata_device *dev)
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n",
- __FUNCTION__, ata_chk_status(ap));
+ __func__, ata_chk_status(ap));
return 0;
err_out_nosup:
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG,
- "%s: EXIT, err\n", __FUNCTION__);
+ "%s: EXIT, err\n", __func__);
return rc;
}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 698ce2c..681252f 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2150,6 +2150,15 @@ int ata_eh_reset(struct ata_link *link, int classify,
ap->ops->set_piomode(ap, dev);
}
+ if (!softreset && !hardreset) {
+ if (verbose)
+ ata_link_printk(link, KERN_INFO, "no reset method "
+ "available, skipping reset\n");
+ if (!(lflags & ATA_LFLAG_ASSUME_CLASS))
+ lflags |= ATA_LFLAG_ASSUME_ATA;
+ goto done;
+ }
+
/* Determine which reset to use and record in ehc->i.action.
* prereset() may examine and modify it.
*/
@@ -2254,6 +2263,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
lflags |= ATA_LFLAG_ASSUME_ATA;
}
+ done:
ata_link_for_each_dev(dev, link) {
/* After the reset, the device state is PIO 0 and the
* controller state is undefined. Reset also wakes up
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 60cd4b1..20dc572 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -56,7 +56,8 @@ u8 ata_irq_on(struct ata_port *ap)
ap->ctl &= ~ATA_NIEN;
ap->last_ctl = ap->ctl;
- iowrite8(ap->ctl, ioaddr->ctl_addr);
+ if (ioaddr->ctl_addr)
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
tmp = ata_wait_idle(ap);
ap->ops->irq_clear(ap);
@@ -81,12 +82,14 @@ void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
if (tf->ctl != ap->last_ctl) {
- iowrite8(tf->ctl, ioaddr->ctl_addr);
+ if (ioaddr->ctl_addr)
+ iowrite8(tf->ctl, ioaddr->ctl_addr);
ap->last_ctl = tf->ctl;
ata_wait_idle(ap);
}
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ WARN_ON(!ioaddr->ctl_addr);
iowrite8(tf->hob_feature, ioaddr->feature_addr);
iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
@@ -167,14 +170,17 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
tf->device = ioread8(ioaddr->device_addr);
if (tf->flags & ATA_TFLAG_LBA48) {
- iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
- tf->hob_feature = ioread8(ioaddr->error_addr);
- tf->hob_nsect = ioread8(ioaddr->nsect_addr);
- tf->hob_lbal = ioread8(ioaddr->lbal_addr);
- tf->hob_lbam = ioread8(ioaddr->lbam_addr);
- tf->hob_lbah = ioread8(ioaddr->lbah_addr);
- iowrite8(tf->ctl, ioaddr->ctl_addr);
- ap->last_ctl = tf->ctl;
+ if (likely(ioaddr->ctl_addr)) {
+ iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
+ tf->hob_feature = ioread8(ioaddr->error_addr);
+ tf->hob_nsect = ioread8(ioaddr->nsect_addr);
+ tf->hob_lbal = ioread8(ioaddr->lbal_addr);
+ tf->hob_lbam = ioread8(ioaddr->lbam_addr);
+ tf->hob_lbah = ioread8(ioaddr->lbah_addr);
+ iowrite8(tf->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = tf->ctl;
+ } else
+ WARN_ON(1);
}
}
@@ -352,7 +358,8 @@ void ata_bmdma_freeze(struct ata_port *ap)
ap->ctl |= ATA_NIEN;
ap->last_ctl = ap->ctl;
- iowrite8(ap->ctl, ioaddr->ctl_addr);
+ if (ioaddr->ctl_addr)
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
/* Under certain circumstances, some controllers raise IRQ on
* ATA_NIEN manipulation. Also, many controllers fail to mask
@@ -459,13 +466,14 @@ void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
*/
void ata_bmdma_error_handler(struct ata_port *ap)
{
- ata_reset_fn_t hardreset;
+ ata_reset_fn_t softreset = NULL, hardreset = NULL;
- hardreset = NULL;
+ if (ap->ioaddr.ctl_addr)
+ softreset = ata_std_softreset;
if (sata_scr_valid(&ap->link))
hardreset = sata_std_hardreset;
- ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset,
+ ata_bmdma_drive_eh(ap, ata_std_prereset, softreset, hardreset,
ata_std_postreset);
}
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 028af5d..511c89b 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -39,7 +39,7 @@
#undef PDC_DEBUG
#ifdef PDC_DEBUG
-#define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
#else
#define PDPRINTK(fmt, args...)
#endif
diff --git a/drivers/ata/pata_rb500_cf.c b/drivers/ata/pata_rb500_cf.c
new file mode 100644
index 0000000..4ce9b03
--- /dev/null
+++ b/drivers/ata/pata_rb500_cf.c
@@ -0,0 +1,314 @@
+/*
+ * A low-level PATA driver to handle a Compact Flash connected on the
+ * Mikrotik's RouterBoard 532 board.
+ *
+ * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ * Copyright (C) 2008 Florian Fainelli <florian@...nwrt.org>
+ *
+ * This file was based on: drivers/ata/pata_ixp4xx_cf.c
+ * Copyright (C) 2006-07 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@...ertech.it>
+ *
+ * Also was based on the driver for Linux 2.4.xx published by Mikrotik for
+ * their RouterBoard 1xx and 5xx series devices. The original Mikrotik code
+ * seems not to have a license.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <linux/libata.h>
+#include <scsi/scsi_host.h>
+
+#include <asm/gpio.h>
+
+#define DRV_NAME "pata-rb500-cf"
+#define DRV_VERSION "0.1.0"
+#define DRV_DESC "PATA driver for RouterBOARD 532 Compact Flash"
+
+#define RB500_CF_MAXPORTS 1
+#define RB500_CF_IO_DELAY 400
+
+#define RB500_CF_REG_CMD 0x0800
+#define RB500_CF_REG_CTRL 0x080E
+#define RB500_CF_REG_DATA 0x0C00
+
+struct rb500_cf_info {
+ void __iomem *iobase;
+ unsigned int gpio_line;
+ int frozen;
+ unsigned int irq;
+};
+
+/* ------------------------------------------------------------------------ */
+
+static inline void rb500_pata_finish_io(struct ata_port *ap)
+{
+ struct ata_host *ah = ap->host;
+ struct rb500_cf_info *info = ah->private_data;
+
+ ata_altstatus(ap);
+ ndelay(RB500_CF_IO_DELAY);
+
+ set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
+}
+
+static void rb500_pata_exec_command(struct ata_port *ap,
+ const struct ata_taskfile *tf)
+{
+ writeb(tf->command, ap->ioaddr.command_addr);
+ rb500_pata_finish_io(ap);
+}
+
+static void rb500_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
+ unsigned int buflen, int write_data)
+{
+ struct ata_port *ap = adev->link->ap;
+ void __iomem *ioaddr = ap->ioaddr.data_addr;
+
+ if (write_data) {
+ for (; buflen > 0; buflen--, buf++)
+ writeb(*buf, ioaddr);
+ } else {
+ for (; buflen > 0; buflen--, buf++)
+ *buf = readb(ioaddr);
+ }
+
+ rb500_pata_finish_io(adev->link->ap);
+}
+
+static void rb500_pata_freeze(struct ata_port *ap)
+{
+ struct rb500_cf_info *info = ap->host->private_data;
+
+ info->frozen = 1;
+}
+
+static void rb500_pata_thaw(struct ata_port *ap)
+{
+ struct rb500_cf_info *info = ap->host->private_data;
+
+ info->frozen = 0;
+}
+
+static irqreturn_t rb500_pata_irq_handler(int irq, void *dev_instance)
+{
+ struct ata_host *ah = dev_instance;
+ struct rb500_cf_info *info = ah->private_data;
+
+ if (gpio_get_value(info->gpio_line)) {
+ set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
+ if (!info->frozen)
+ ata_interrupt(info->irq, dev_instance);
+ } else {
+ set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void rb500_pata_irq_clear(struct ata_port *ap)
+{
+}
+
+static int rb500_pata_port_start(struct ata_port *ap)
+{
+ return 0;
+}
+
+static struct ata_port_operations rb500_pata_port_ops = {
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+
+ .exec_command = rb500_pata_exec_command,
+ .check_status = ata_check_status,
+ .dev_select = ata_std_dev_select,
+
+ .data_xfer = rb500_pata_data_xfer,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .freeze = rb500_pata_freeze,
+ .thaw = rb500_pata_thaw,
+ .error_handler = ata_bmdma_error_handler,
+
+ .irq_handler = rb500_pata_irq_handler,
+ .irq_clear = rb500_pata_irq_clear,
+ .irq_on = ata_irq_on,
+
+ .port_start = rb500_pata_port_start,
+};
+
+/* ------------------------------------------------------------------------ */
+
+static struct scsi_host_template rb500_pata_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
+ .bios_param = ata_std_bios_param,
+ .proc_name = DRV_NAME,
+
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+};
+
+/* ------------------------------------------------------------------------ */
+
+static void rb500_pata_setup_ports(struct ata_host *ah)
+{
+ struct rb500_cf_info *info = ah->private_data;
+ struct ata_port *ap;
+
+ ap = ah->ports[0];
+
+ ap->ops = &rb500_pata_port_ops;
+ ap->pio_mask = 0x1f; /* PIO4 */
+ ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
+
+ ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_CMD;
+ ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
+ ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
+
+ ata_std_ports(&ap->ioaddr);
+
+ ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA;
+}
+
+static __devinit int rb500_pata_driver_probe(struct platform_device *pdev)
+{
+ unsigned int irq;
+ int gpio;
+ struct resource *res;
+ struct ata_host *ah;
+ struct rb500_cf_info *info;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no IOMEM resource found\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(&pdev->dev, "no IRQ resource found\n");
+ return -ENOENT;
+ }
+
+ gpio = irq_to_gpio(irq);
+ if (gpio < 0) {
+ dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq);
+ return -ENOENT;
+ }
+
+ ret = gpio_request(gpio, DRV_NAME);
+ if (ret) {
+ dev_err(&pdev->dev, "GPIO request failed\n");
+ return ret;
+ }
+
+ /* allocate host */
+ ah = ata_host_alloc(&pdev->dev, RB500_CF_MAXPORTS);
+ if (!ah)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ah);
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ ah->private_data = info;
+ info->gpio_line = gpio;
+ info->irq = irq;
+
+ info->iobase = devm_ioremap_nocache(&pdev->dev, res->start,
+ res->end - res->start + 1);
+ if (!info->iobase)
+ return -ENOMEM;
+
+ ret = gpio_direction_input(gpio);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to set GPIO direction, err=%d\n",
+ ret);
+ goto err_free_gpio;
+ }
+
+ rb500_pata_setup_ports(ah);
+
+ ret = ata_host_activate(ah, irq, rb500_pata_irq_handler,
+ IRQF_TRIGGER_LOW, &rb500_pata_sht);
+ if (ret)
+ goto err_free_gpio;
+
+ return 0;
+
+err_free_gpio:
+ gpio_free(gpio);
+
+ return ret;
+}
+
+static __devexit int rb500_pata_driver_remove(struct platform_device *pdev)
+{
+ struct ata_host *ah = platform_get_drvdata(pdev);
+ struct rb500_cf_info *info = ah->private_data;
+
+ ata_host_detach(ah);
+ gpio_free(info->gpio_line);
+
+ return 0;
+}
+
+static struct platform_driver rb500_pata_platform_driver = {
+ .probe = rb500_pata_driver_probe,
+ .remove = __devexit_p(rb500_pata_driver_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+/* ------------------------------------------------------------------------ */
+
+#define DRV_INFO DRV_DESC " version " DRV_VERSION
+
+static int __init rb500_pata_module_init(void)
+{
+ printk(KERN_INFO DRV_INFO "\n");
+
+ return platform_driver_register(&rb500_pata_platform_driver);
+}
+
+static void __exit rb500_pata_module_exit(void)
+{
+ platform_driver_unregister(&rb500_pata_platform_driver);
+}
+
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_AUTHOR("Florian Fainelli <florian@...nwrt.org>");
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+
+module_init(rb500_pata_module_init);
+module_exit(rb500_pata_module_exit);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists