| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <200803120101.48805.rjw@sisk.pl>
Date: Wed, 12 Mar 2008 01:01:47 +0100
From: "Rafael J. Wysocki" <rjw@...k.pl>
To: Greg KH <greg@...ah.com>
Cc: Alan Stern <stern@...land.harvard.edu>,
Andrew Morton <akpm@...ux-foundation.org>,
David Brownell <david-b@...bell.net>,
LKML <linux-kernel@...r.kernel.org>, Pavel Machek <pavel@....cz>,
pm list <linux-pm@...ts.linux-foundation.org>
Subject: [PATCH 3/3] PM: make wakeup flags available whenever CONFIG_PM is set
From: Alan Stern <stern@...land.harvard.edu>
The various wakeup flags and their accessor macros in struct
dev_pm_info should be available whenever CONFIG_PM is enabled, not
just when CONFIG_PM_SLEEP is on. Otherwise remote wakeup won't always
be configurable for runtime power management. This patch (as1056)
fixes the oversight.
[rjw: rebased the patch on top of the previous two.]
Signed-off-by: Alan Stern <stern@...land.harvard.edu>
CC: David Brownell <david-b@...bell.net>
Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
---
drivers/base/power/main.c | 2 -
drivers/base/power/sysfs.c | 2 +
include/linux/pm.h | 64 +++++++++++++++++++++++++--------------------
3 files changed, 38 insertions(+), 30 deletions(-)
Index: linux-2.6/include/linux/pm.h
===================================================================
--- linux-2.6.orig/include/linux/pm.h
+++ linux-2.6/include/linux/pm.h
@@ -183,9 +183,9 @@ typedef struct pm_message {
struct dev_pm_info {
pm_message_t power_state;
unsigned can_wakeup:1;
+ unsigned should_wakeup:1;
bool sleeping:1; /* Owned by the PM core */
#ifdef CONFIG_PM_SLEEP
- unsigned should_wakeup:1;
struct list_head entry;
#endif
};
@@ -198,11 +198,6 @@ extern void device_resume(void);
extern int device_suspend(pm_message_t state);
extern int device_prepare_suspend(pm_message_t state);
-#define device_set_wakeup_enable(dev,val) \
- ((dev)->power.should_wakeup = !!(val))
-#define device_may_wakeup(dev) \
- (device_can_wakeup(dev) && (dev)->power.should_wakeup)
-
extern void __suspend_report_result(const char *function, void *fn, int ret);
#define suspend_report_result(fn, ret) \
@@ -210,6 +205,35 @@ extern void __suspend_report_result(cons
__suspend_report_result(__FUNCTION__, fn, ret); \
} while (0)
+#else /* !CONFIG_PM_SLEEP */
+
+static inline int device_suspend(pm_message_t state)
+{
+ return 0;
+}
+
+#define suspend_report_result(fn, ret) do {} while (0)
+
+#endif /* !CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM
+
+/* changes to device_may_wakeup take effect on the next pm state change.
+ * by default, devices should wakeup if they can.
+ */
+#define device_can_wakeup(dev) \
+ ((dev)->power.can_wakeup)
+#define device_init_wakeup(dev,val) \
+ do { \
+ device_can_wakeup(dev) = !!(val); \
+ device_set_wakeup_enable(dev,val); \
+ } while(0)
+
+#define device_set_wakeup_enable(dev,val) \
+ ((dev)->power.should_wakeup = !!(val))
+#define device_may_wakeup(dev) \
+ (device_can_wakeup(dev) && (dev)->power.should_wakeup)
+
/*
* Platform hook to activate device wakeup capability, if that's not already
* handled by enable_irq_wake() etc.
@@ -224,35 +248,19 @@ static inline int call_platform_enable_w
return 0;
}
-#else /* !CONFIG_PM_SLEEP */
-
-static inline int device_suspend(pm_message_t state)
-{
- return 0;
-}
-
-#define device_set_wakeup_enable(dev,val) do{}while(0)
-#define device_may_wakeup(dev) (0)
+#else /* !CONFIG_PM */
-#define suspend_report_result(fn, ret) do { } while (0)
+#define device_can_wakeup(dev) 0
+#define device_init_wakeup(dev,val) do {} while (0)
+#define device_set_wakeup_enable(dev,val) do {} while (0)
+#define device_may_wakeup(dev) 0
static inline int call_platform_enable_wakeup(struct device *dev, int is_on)
{
return 0;
}
-#endif /* !CONFIG_PM_SLEEP */
-
-/* changes to device_may_wakeup take effect on the next pm state change.
- * by default, devices should wakeup if they can.
- */
-#define device_can_wakeup(dev) \
- ((dev)->power.can_wakeup)
-#define device_init_wakeup(dev,val) \
- do { \
- device_can_wakeup(dev) = !!(val); \
- device_set_wakeup_enable(dev,val); \
- } while(0)
+#endif /* !CONFIG_PM */
/*
* Global Power Management flags
Index: linux-2.6/drivers/base/power/main.c
===================================================================
--- linux-2.6.orig/drivers/base/power/main.c
+++ linux-2.6/drivers/base/power/main.c
@@ -57,8 +57,6 @@ static DEFINE_MUTEX(dpm_list_mtx);
/* 'true' if all devices have been suspended, protected by dpm_list_mtx */
static bool all_sleeping;
-int (*platform_enable_wakeup)(struct device *dev, int is_on);
-
/**
* device_pm_add - add a device to the list of active devices
* @dev: Device to be added to the list
Index: linux-2.6/drivers/base/power/sysfs.c
===================================================================
--- linux-2.6.orig/drivers/base/power/sysfs.c
+++ linux-2.6/drivers/base/power/sysfs.c
@@ -6,6 +6,8 @@
#include <linux/string.h>
#include "power.h"
+int (*platform_enable_wakeup)(struct device *dev, int is_on);
+
/*
* wakeup - Report/change current wakeup option for device
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists