| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 13 Mar 2008 20:07:00 +1100
From: Ben Nizette <bn@...sdigital.com>
To: Hans-Jürgen Koch <hjk@...utronix.de>
Cc: gregkh <gregkh@...e.de>,
linux-kernel <linux-kernel@...r.kernel.org>,
Paul Mundt <lethal@...ux-sh.org>
Subject: Re: [PATCH v2] UIO: Implement a UIO interface for the SMX
Cryptengine
On Thu, 2008-03-13 at 09:53 +0100, Hans-Jürgen Koch wrote:
> Am Wed, 12 Mar 2008 21:06:22 +1100
> schrieb Ben Nizette <bn@...sdigital.com>:
> >
> > This is version 2 of this patch and addresses all issues raised by
> > Hans-Jürgen Koch in his review of version 1.
>
> But it doesn't address the issue Paul Mundt has raised. As this driver will
> probably serve as an example for other UIO platform drivers, it should be
> correct. And I also consider it a bit impolite if you completely ignore Paul,
> who has taken the time to review your driver and pointed out a mistake. His
> solution is obviously the correct one.
>
Unfortunately v2 of this patch missed Paul's comments by about a minute.
I have made his change and was waiting any comments on this version
before I pushed out a v3. If this version here ostensibly meets with
your approval, I shall send out a new and hopefully final version.
I too am hoping this will serve as an example to people who previously
have just used /dev/mem and polled the device; I'm very much committed
to getting it right!
Thanks,
--Ben.
> Thanks,
> Hans
>
> >
> > Signed-off-by: Ben Nizette <bn@...sdigital.com>
> > ---
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 2cdb591..480fd44 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -3554,6 +3554,11 @@ M: mhoffman@...htlink.com
> > L: lm-sensors@...sensors.org
> > S: Maintained
> >
> > +SMX UIO Interface
> > +P: Ben Nizette
> > +M: bn@...sdigital.com
> > +S: Maintained
> > +
> > SOFTMAC LAYER (IEEE 802.11)
> > P: Daniel Drake
> > M: dsd@...too.org
> > diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
> > index b778ed7..f57b347 100644
> > --- a/drivers/uio/Kconfig
> > +++ b/drivers/uio/Kconfig
> > @@ -26,4 +26,16 @@ config UIO_CIF
> > To compile this driver as a module, choose M here: the module
> > will be called uio_cif.
> >
> > +config UIO_SMX
> > + tristate "SMX cryptengine UIO interface"
> > + depends on UIO
> > + default n
> > + help
> > + Userspace IO interface to the Cryptography engine found on the
> > + Nias Digital SMX boards. These will be available from Q4 2008
> > + from http://www.niasdigital.com. The userspace part of this
> > + driver will be released under the GPL at the same time as the
> > + hardware and will be able to be downloaded from the same site.
> > +
> > + If you compile this as a module, it will be called uio_smx.
> > endmenu
> > diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
> > index 7fecfb4..18c4566 100644
> > --- a/drivers/uio/Makefile
> > +++ b/drivers/uio/Makefile
> > @@ -1,2 +1,3 @@
> > obj-$(CONFIG_UIO) += uio.o
> > obj-$(CONFIG_UIO_CIF) += uio_cif.o
> > +obj-$(CONFIG_UIO_SMX) += uio_smx.o
> > diff --git a/drivers/uio/uio_smx.c b/drivers/uio/uio_smx.c
> > new file mode 100644
> > index 0000000..6a8bb6e
> > --- /dev/null
> > +++ b/drivers/uio/uio_smx.c
> > @@ -0,0 +1,118 @@
> > +/*
> > + * UIO SMX Cryptengine driver.
> > + *
> > + * (C) 2008 Nias Digital P/L <bn@...sdigital.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/uio_driver.h>
> > +
> > +#include <asm/io.h>
> > +
> > +#define SMX_CSR 0x00000000
> > +#define SMX_EnD 0x00000001
> > +#define SMX_RUN 0x00000002
> > +#define SMX_DRDY 0x00000004
> > +#define SMX_ERR 0x00000008
> > +
> > +static irqreturn_t smx_handler(int irq, struct uio_info *dev_info)
> > +{
> > + void __iomem *csr = dev_info->mem[0].internal_addr + SMX_CSR;
> > +
> > + u32 status = ioread32(csr);
> > +
> > + if (!csr & SMX_DRDY)
> > + return IRQ_NONE;
> > +
> > + /* Disable interrupt */
> > + iowrite32(status & ~SMX_DRDY, csr);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int __devinit smx_ce_probe(struct platform_device *dev)
> > +{
> > + struct uio_info *info;
> > + struct resource *regs;
> > +
> > + info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
> > + if (!info)
> > + return -ENOMEM;
> > +
> > + regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
> > + if (!regs)
> > + goto out_free;
> > +
> > + info->mem[0].addr = regs->start;
> > + if (!info->mem[0].addr)
> > + goto out_free;
> > + info->mem[0].internal_addr = ioremap(regs->start,
> > + regs->end - regs->start);
> > + if (!info->mem[0].internal_addr)
> > + goto out_free;
> > +
> > + info->mem[0].size = regs->end - regs->start;
> > + info->mem[0].memtype = UIO_MEM_PHYS;
> > +
> > + info->name = "smx-ce";
> > + info->version = "0.03";
> > + info->irq = platform_get_irq(dev, 0);
> > + info->irq_flags = IRQF_SHARED;
> > + info->handler = smx_handler;
> > +
> > + platform_set_drvdata(dev, info);
> > +
> > + if (uio_register_device(&dev->dev, info))
> > + goto out_unmap;
> > +
> > + return 0;
> > +out_unmap:
> > + iounmap(info->mem[0].internal_addr);
> > +out_free:
> > + kfree(info);
> > +
> > + return -ENODEV;
> > +}
> > +
> > +static int __devexit smx_ce_remove(struct platform_device *dev)
> > +{
> > + struct uio_info *info = platform_get_drvdata(dev);
> > +
> > + uio_unregister_device(info);
> > + platform_set_drvdata(dev, NULL);
> > + iounmap(info->mem[0].internal_addr);
> > +
> > + kfree(info);
> > +
> > + return 0;
> > +}
> > +
> > +static struct platform_driver smx_ce_driver = {
> > + .probe = smx_ce_probe,
> > + .remove = __devexit_p(smx_ce_remove),
> > + .driver = {
> > + .name = "smx-ce",
> > + .owner = THIS_MODULE,
> > + },
> > +};
> > +
> > +static int __init smx_ce_init_module(void)
> > +{
> > + return platform_driver_register(&smx_ce_driver);
> > +}
> > +module_init(smx_ce_init_module);
> > +
> > +static void __exit smx_ce_exit_module(void)
> > +{
> > + platform_driver_unregister(&smx_ce_driver);
> > +}
> > +module_exit(smx_ce_exit_module);
> > +
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_AUTHOR("Ben Nizette <bn@...sdigital.com>");
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists